10
Maquinaria de impresiónMáquina estampadora y troqueladora de etiquetas
Troqueladora semiautomática Wookil WTNS 1700
Año 2000
Tamaño máximo 1200x 1700 mm
Tamaño mínimo: 600 x 850 mm
Presión máxima 350 toneladas
Troqueladora semiautomática Wookil WTNS 1700
Año 2000
Tamaño máximo 1200x 1700 mm
Tamaño mínimo: 600 x 850 mm
Presión máxima 350 toneladas
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Año 2000
Tamaño máximo 1200x 1700 mm
Tamaño mínimo: 600 x 850 mm
Presión máxima 350 toneladas
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
11
Máquinas de procesamiento de plásticoMáquinas de moldeo por inyecciónMáquinas de moldeo por inyección de plástico
Ref. no.: 18140Producer: BATTENFELDYear of construction: 2006Clamping unitClamping force: 25 tonOpening stroke: 450 mmDistance between tie bars: 270 X 270 mmMould height min.: 150 mmInjection unitScrew diameter: 14 mmInjection volume: 15 cm³Shot weight: 7 gInjection pressure: 2650 barMeasurements and weightDimensions: 2,25 X 0,90 X 1,30 mMachine weight: 1100 kg
Ref. no.: 18140
Producer: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Producer: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
13
Máquinas de procesamiento de plásticoMáquinas de moldeo por inyecciónMáquinas de moldeo por inyección de plástico
Ref. no.: 18138Producer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 850 mmDistance between tie bars: 370 X 3370 mmMould height min.: 200 mmMould height max.: 510 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 22 mmInjection volume: 37 cm³Shot weight: 32 gInjection pressure: 2580 barMeasurements and weightDimensions: 4,50 X 1,28 X 1,95 mMachine weight: 4750 kg
Ref. no.: 18138
Producer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 3370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Producer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 3370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
13
Máquinas de procesamiento de plásticoMáquinas de moldeo por inyecciónMáquinas de moldeo por inyección multicomponente
Ref. no.: 18092Producer: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 25250 kg
Ref. no.: 18092
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
13
Máquinas de procesamiento de plásticoMáquinas de moldeo por inyecciónMáquinas de moldeo por inyección de plástico
Ref. no.: 17514Producer: BILLIONYear of construction: 2011Clamping unitClamping force: 50 tonOpening stroke: 250 mmDistance between tie bars: 350 x 300 mmMould height min.: 150 mmMould height max.: 400 mmPlaten size (h x v): 490 x 440 mmInjection unitScrew diameter: 25 mmInjection volume: 39 cm³Shot weight: 35 gInjection pressure: 2040 barMeasurements and weightDimensions: 3,7 x 1,4 x 1,8 mMachine weight: 3200 kgAdditional information & extrasHot runner systems: 6 pcs.
Ref. no.: 17514
Producer: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Producer: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
11
Máquinas de procesamiento de plásticoMáquinas de moldeo por inyecciónMáquinas de moldeo por inyección de plástico
Ref. no.: 17507Producer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg
Ref. no.: 17507
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
13
Máquinas de procesamiento de plásticoMáquinas de moldeo por inyecciónMáquinas de moldeo por inyección de plástico
Ref. no.: 16369Producer: BATTENFELDYear of construction: 2005Clamping unitClamping force: 75 tonOpening stroke: 800 mmDistance between tie bars: 405 x 405 mmMould height min.: 150 mmMould height max.: 480 mmInjection unitScrew diameter: 18 mmInjection volume: 30 cm³Shot weight: 27 gInjection pressure: 2440 barMeasurements and weightDimensions: 4,5 x 1,7 x 2,0 mMachine weight: 4500 kg
Ref. no.: 16369
Producer: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Producer: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
2
Trabajo de metales y máquinas herramientaTornosOtros
punch set
punch set
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
1
Trabajo de metales y máquinas herramientaLijadorasAccesorios y repuestos
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
9
Trabajo de metales y máquinas herramientaAccesorios y repuestosOtros
Deposit: 1000,00 EURPacket 1: 30 x 30 x 20 cm bei 20 kgPacket 2: 25 x 20 x 110 cm bei 19 kgcomplete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Trabajo de metales y máquinas herramientaFresadorasAccesorios y repuestos
Working Area: 560 x 400 x 32 mmReference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
Working Area: 560 x 400 x 32 mm
Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
6
Trabajo de metales y máquinas herramientaFresadorasAccesorios y repuestos
Rotary table: 360 °Rotary axis Ø: 400 mmSpace requirement (W x D x H): 0,7 x 0,6 x 0,2 mWeight of machine: 240 kgCondition: good
Rotary table: 360 °
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Rotary axis Ø: 400 mm
Space requirement (W x D x H): 0,7 x 0,6 x 0,2 m
Weight of machine: 240 kg
Condition: good
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
5
Trabajo de metales y máquinas herramientaAccesorios y repuestosOtros
Weight of machine: 11 kgCondition: very goodSize C, Location hole for Multifix on the support, diameter 23 mm
Weight of machine: 11 kg
Condition: very good
Size C, Location hole for Multifix on the support, diameter 23 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Condition: very good
Size C, Location hole for Multifix on the support, diameter 23 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
5
Trabajo de metales y máquinas herramientaAccesorios y repuestosTecnología de medición
Granite plate: 750/ 500/ 20,5 mmAluminium plate: 750/ 500/ 40 mmSpace requirement (W x D x H): 0,75 x 0,5 x 0,805 mWeight of machine: 370 kgCondition: very goodmeasuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
14
Trabajo de metales y máquinas herramientaTornosTornos de torreta
Turning diameter: 340 mmTurning length: 1050 mmCentre height: 170 mmSpeed range: 20 - 2500 rpmQuill ram: 160 mmChucks: Ø 250 mm - 4 jawsSpindle bore: 55 mmSpace requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 mWeight of machine: 2.200 kgTotal power: 5,5 kWCondition: gutAccessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: gut
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: gut
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Trabajo de metales y máquinas herramientaMáquinas de soldarOtros
Total power: 6,5 - 12 kWWeight of machine: 160 kgSpace requirement (W x D x H): 0,9 x 0,8 x 1,1 mCondition: good working conditionarm 350 mm, with cooling, welding time adjustable, U = 1,2 - 2,2, Fr. 50, input one phase 220 V, I = 29 A
Total power: 6,5 - 12 kW
Weight of machine: 160 kg
Space requirement (W x D x H): 0,9 x 0,8 x 1,1 m
Condition: good working condition
arm 350 mm, with cooling, welding time adjustable, U = 1,2 - 2,2, Fr. 50, input one phase 220 V, I = 29 A
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Weight of machine: 160 kg
Space requirement (W x D x H): 0,9 x 0,8 x 1,1 m
Condition: good working condition
arm 350 mm, with cooling, welding time adjustable, U = 1,2 - 2,2, Fr. 50, input one phase 220 V, I = 29 A
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
8
Maquinaria para el trabajo de maderaAserradoSierras de cinta
Cutting diameter: 340 x 200 mmSectional area 45° circular: 230 mmCutting speed: 20 - 120 m/minStop: 600 mmSaw blade dimensions: 4770-4870 x 32 x 1 mmTotal power: 4 kWWeight of machine: 1400 kgSpace requirement (W x D x H): 2,6 x 1,4 x 1,6 msemi-automatic operation, robust machine, good condition, ready to use
Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
8
Trabajo de metales y máquinas herramientaAserrado
Cutting diameter: 100 mmSaw blade dimensions: 280 mmSpeed range: 10, 20, 40, 80 rpmSectional area 90° flat: 120 x 100 mmSectional area 90° circular: 100 mmLength stop: 500 mmTotal power: 1,5 kWWeight of machine: 700 kgCondition: goodsemi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supplyAccessory: 18 saw blades, roller conveyor 2 m
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Maquinaria de embalajeMáquinas de embalaje
Vibration monitoring: yesSingle plain balancing: yesDual plane balancing: yesIteration Method: yesTrans-red method: yesWeight of machine: 15 kgCondition: very goodmaintained vibration meter
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
5
Trabajo de metales y máquinas herramientaFresadorasOtros
X: 500 mmY: 360 mmZ: 400 mmSpeed range: 40 - 2000 rpmTaper fixture: SK 40 DIN2079Control: Heidenhain TNC 155Total power: 6 kWWeight of machine: 2000 kgSpace requirement (W x D x H): 2,8 x 2,9 x 1,9 mCondition: good, ready for operationunder power, ready for inspectionAccessory: docmentation
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
7
Maquinaria de embalajeMáquinas de embalaje
Weight of machine: 7 kgSpace requirement (W x D x H): 0,3 x 0,3 x 0,2 mSeparate control device for the chuck clamping
Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
12
Trabajo de metales y máquinas herramientaTaladradoras y mandrinadorasMáquinas de roscado
Table size: 260 x 290 mmTaper fixture: BohrfutterCoolant system: jaTotal power: 0,55 kWWeight of machine: 380 kgSpace requirement (W x D x H): 0,8 x 0,7 x 1,8 mwell-maintained machine ready for immediate useAccessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Table size: 260 x 290 mm
Taper fixture: Bohrfutter
Coolant system: ja
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Taper fixture: Bohrfutter
Coolant system: ja
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
7
Weight of machine: 170 kgDimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm
Weight of machine: 170 kg
Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Maquinaria de embalajeMáquinas de embalaje
Total power: 1,5 kWWeight of machine: 20,5 kgSpace requirement (W x D x H): 0,765 x 0,305 x 0,155 mHeating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Trabajo de metales y máquinas herramientaAserrado
Cutting speed: 6 - 30 m/minSaw blade dimensions: 400 (425) x 50 x 5 mmSectional area 45° flat: 180 x 40 mmSectional area 90° flat: 240 x 70 mmSectional area 90° circular: 140 mmSquare-section area 90°: 130 mmMitre cut: continuously 60 -/+ degreeSaw blade feed: 0 - 1.200 mm/minMinimum quantity lubrication system: KKS 401 115326Autom. Flat magazine FMA for bars: 1500 - 7000 mmControl: Kaltenbach MULTI-COMChip conveyor: yesTotal power: 5,5 kWWeight of machine: 4500 kgSpace requirement (W x D x H): 9,45 x 2,59 x 2,1 mHours of operation: 17290 hCondition: very goodfully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocationAccessory: 2 saw blades
Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
3
Maquinaria de embalajeMáquinas de embalaje
Suction tube: diameter 150 mm2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Maquinaria para el trabajo de maderaMáquinas para la fabricación de ventanasLíneas de producción completas
Power: 2.000Generator type: Newage Stamford HC.74HMotor type: Mitsubishi S16-R-PTA2Voltage: 50 Hz - 400 VTank capacity: no fuel tank ltrContainer (W x D x H): 4,8 x 1,7 x 2,5Working hour: 549 hWeight of machine: 13.000 kgCondition: very goodwithout exhaust system, without starter battery
Power: 2.000
Generator type: Newage Stamford HC.74H
Motor type: Mitsubishi S16-R-PTA2
Voltage: 50 Hz - 400 V
Tank capacity: no fuel tank ltr
Container (W x D x H): 4,8 x 1,7 x 2,5
Working hour: 549 h
Weight of machine: 13.000 kg
Condition: very good
without exhaust system, without starter battery
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Generator type: Newage Stamford HC.74H
Motor type: Mitsubishi S16-R-PTA2
Voltage: 50 Hz - 400 V
Tank capacity: no fuel tank ltr
Container (W x D x H): 4,8 x 1,7 x 2,5
Working hour: 549 h
Weight of machine: 13.000 kg
Condition: very good
without exhaust system, without starter battery
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
14
Trabajo de metales y máquinas herramientaTornosTornos CNC
Swing diameter over bed: 490 mmLength between centres: 1000 mmSwing diameter over cross slide: 280 mmSpeed range: 1 - 625 / 1 - 3.000 rpmGearbox stages: ZF - 2Spindle bore: 93 mmDiameter of spindle bearing: Größe 8 - 130 mmTailstock taper: MK5 - Hub 160 mmControl: Siemens ManualturnTotal power: 17 kWWeight of machine: 3.600 kgSpace requirement (W x D x H): 3,0 x 1,8 x 2,0 mWorking hour: 31556 hwithout jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027Accessory: Documentation, suction, no other accessories
Swing diameter over bed: 490 mm
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h
without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027
Accessory: Documentation, suction, no other accessories
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h
without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027
Accessory: Documentation, suction, no other accessories
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
14
Maquinaria para el trabajo de maderaMáquinas para la fabricación de ventanasLíneas de producción completas
Power: 1.250 / 1.000Generator type: AVK DSG74M 1-4Motor type: ERGESpeed: 1.500 rpmVoltage: 50 Hz - 400 VContainer (W x D x H): 12,2 x 3,0 x 4,5Working hour: 128 hWeight of machine: 11.380 kgCondition: very goodNot operational, cooling water is leaking from the fuel system (defective immersion sleeve).
Power: 1.250 / 1.000
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good
Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good
Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
6
Trabajo de metales y máquinas herramientaMáquinas para trabajar chapaPunzonadoras
Working pressure: min 6 - max. 7 barWeight of machine: 170 kgSpace requirement (W x D x H): 0,55 x 0,55 x 1,4 mCondition: very goodfor profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Trabajo de metales y máquinas herramientaMáquinas para trabajar chapaMáquinas de estampado y doblado
Rivet diameter: 1 - 4 / 2 - 6 mmRiveting force: 3 / 6 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 170 mmMounting table: 320 x 290 mmWeight of machine: 240 kgTotal power: 0,74 kWSpace requirement (W x D x H): 0,45 x 0,7 x 0,7 mCondition: very goodwell-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
6
Maquinaria de embalajeMáquinas de embalaje
Total power: 1,4 kWWeight of machine: 210 kgSpace requirement (W x D x H): 1,2 x 1,2 x 2,05 mfor cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 barAccessory: without extraction function
Total power: 1,4 kW
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
5
Trabajo de metales y máquinas herramientaMáquinas para trabajar chapaMáquinas de estampado y doblado
Rivet diameter: 1 - 4 / 2 - 6 mmRiveting force: 3 / 6 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 170 mmMounting table: 320 x 290 mmWeight of machine: 240 kgTotal power: 0,74 kWSpace requirement (W x D x H): 0,45 x 0,7 x 0,7 mCondition: very goodwell-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
5
Trabajo de metales y máquinas herramientaMáquinas para trabajar chapaMáquinas de estampado y doblado
Rivet diameter: 1 - 4 / 2 - 6 mmRiveting force: 3 / 6 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 170 mmMounting table: 320 x 290 mmWeight of machine: 240 kgTotal power: 0,74 kWSpace requirement (W x D x H): 0,45 x 0,7 x 0,7 mCondition: very goodwell-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
10
Trabajo de metales y máquinas herramientaMáquinas y equipos de corteMáquinas de corte por láser
X: 1300 mmY: 1300 mmMax. workpiece dimension: 1500 x 1500 x 135 mmRepeatability: 0,025Wavelength: 10,6 micrometerWorking hour: Laser 6135, Gravierer 18.743 hSpace requirement (W x D x H): 2,4 x 2,0 x 1,4 mTotal power: 2,3 kWWeight of machine: 1200 kgCondition: gutType: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Maquinaria para el trabajo de maderaMáquinas para la fabricación de ventanasLíneas de producción completas
Power: 2.071 / 1.641Generator type: Stamford PI734F1Motor type: MitsubishiVoltage: 50 Hz - 400 VBattery voltage: 24Tank capacity: 2.000 ltrContainer (W x D x H): 12,3 x 2,45 x 3,2Working hour: 181 hWeight of machine: 23.000 kgCondition: very good
Power: 2.071 / 1.641
Generator type: Stamford PI734F1
Motor type: Mitsubishi
Voltage: 50 Hz - 400 V
Battery voltage: 24
Tank capacity: 2.000 ltr
Container (W x D x H): 12,3 x 2,45 x 3,2
Working hour: 181 h
Weight of machine: 23.000 kg
Condition: very good
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Generator type: Stamford PI734F1
Motor type: Mitsubishi
Voltage: 50 Hz - 400 V
Battery voltage: 24
Tank capacity: 2.000 ltr
Container (W x D x H): 12,3 x 2,45 x 3,2
Working hour: 181 h
Weight of machine: 23.000 kg
Condition: very good
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
11
Maquinaria para el trabajo de maderaMáquinas para la fabricación de ventanasLíneas de producción completas
Power: 1130 / 904Motor type: MTU V18 Bi Turbo DieselSpeed: 1500 rpmVoltage: 50 Hz - 230 / 400 VTank capacity: 800 ltrWorking hour: 116 hCondition: very goodDocumentation, heat exchanger, batteries, soundproof hood
Power: 1130 / 904
Motor type: MTU V18 Bi Turbo Diesel
Speed: 1500 rpm
Voltage: 50 Hz - 230 / 400 V
Tank capacity: 800 ltr
Working hour: 116 h
Condition: very good
Documentation, heat exchanger, batteries, soundproof hood
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Motor type: MTU V18 Bi Turbo Diesel
Speed: 1500 rpm
Voltage: 50 Hz - 230 / 400 V
Tank capacity: 800 ltr
Working hour: 116 h
Condition: very good
Documentation, heat exchanger, batteries, soundproof hood
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
4
Maquinaria de embalajeMáquinas de embalaje
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
5
Maquinaria para el trabajo de maderaMáquinas para la fabricación de ventanasLíneas de producción completas
Power: 3300 / 3000Generator type: C175-16 SCAC, V16Motor type: C175-16 SCAC, V16Speed: 1.500 rpmVoltage: 50 Hz - 400 / 230 VControl: EMCP 4.2BBattery voltage: 24Container (W x D x H): 7,9 x 2,8 x 3,3Working hour: 373 hWeight of machine: 23000 kgCondition: very good
Power: 3300 / 3000
Generator type: C175-16 SCAC, V16
Motor type: C175-16 SCAC, V16
Speed: 1.500 rpm
Voltage: 50 Hz - 400 / 230 V
Control: EMCP 4.2B
Battery voltage: 24
Container (W x D x H): 7,9 x 2,8 x 3,3
Working hour: 373 h
Weight of machine: 23000 kg
Condition: very good
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Generator type: C175-16 SCAC, V16
Motor type: C175-16 SCAC, V16
Speed: 1.500 rpm
Voltage: 50 Hz - 400 / 230 V
Control: EMCP 4.2B
Battery voltage: 24
Container (W x D x H): 7,9 x 2,8 x 3,3
Working hour: 373 h
Weight of machine: 23000 kg
Condition: very good
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
14
Trabajo de metales y máquinas herramientaTornosTornos de torreta
Turning diameter: 250 mmCentre height: 125 mmTurning length: 800 mmSpeed range: 3.000 rpmTotal power: 9 kWWeight of machine: 650 kgSpace requirement (W x D x H): 1,4 x 0,8 x 1,85 mDocumentation: yesCondition: very goodLever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little usedAccessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
Turning diameter: 250 mm
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good
Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used
Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good
Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used
Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
6
Load capacity: 27 kgWeight of machine: 100 kgSpace requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 mCondition: very goodGripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 mAccessory: no further accessories
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
14
Maquinaria de embalajeMáquinas de embalaje
Product witdh: 45 - 400 mmProduct hight: 1 - 200 mmProduct length: 50 - unlimited mmPower: max. 60 stroke/minTransport speed: 8 - 30 m/minFilm thickness: 10 - 80 µmTemperature range: 170 ° CTotal power: 25 kWWeight of machine: 2.100 kgSpace requirement (W x D x H): 11,5 x 2,4 x 2,0 mSystem structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
Product witdh: 45 - 400 mm
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
5
Trabajo de metales y máquinas herramientaMáquinas para trabajar chapaMáquinas de estampado y doblado
Rivet diameter: 2 - 6 / 2 - 7 mmRiveting force: 6,5 / 8,2 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 159 mmMounting table: 240 x 247 mmWeight of machine: 180 kgTotal power: 0,37 kWSpace requirement (W x D x H): 0,4 x 0,6 x 0,8 mCondition: very goodvery nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
5
Trabajo de metales y máquinas herramientaMáquinas para trabajar chapaMáquinas de estampado y doblado
Rivet diameter: 2 - 6 / 2 - 7 mmRiveting force: 6,5 / 8,2 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 159 mmMounting table: 240 x 247 mmWeight of machine: 180 kgTotal power: 0,37 kWSpace requirement (W x D x H): 0,4 x 0,6 x 0,8 mCondition: very goodvery nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
1
Módulo solar Maysun Solar, MSE-07 370 Wp - full black, módulo mono PU, 1755 mm x 1038 mm x 30 mm, longitud del cable de conexión 110 cm, solo recogida
Módulo solar Maysun Solar, MSE-07 370 Wp - full black, módulo mono PU, 1755 mm x 1038 mm x 30 mm, longitud del cable de conexión 110 cm, solo recogida
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
10
Maquinaria para el trabajo de maderaMáquinas para la fabricación de ventanasLíneas de producción completas
Power: 2000 / 1600Generator type: Leroy Somer LSA 52.3 S5Motor type: Perkins 4012-46TAG3ASpeed: 1.500 rpmVoltage: 50 Hz - 230 7 400 VControl: DSE 8610Battery voltage: 24Tank capacity: 2000 ltrContainer (W x D x H): 5,0 x 2,2 x 2,55Working hour: 0 hWeight of machine: 11,160 kgCondition: newWith continuous operation, the performance is reduced by 10%
Power: 2000 / 1600
Generator type: Leroy Somer LSA 52.3 S5
Motor type: Perkins 4012-46TAG3A
Speed: 1.500 rpm
Voltage: 50 Hz - 230 7 400 V
Control: DSE 8610
Battery voltage: 24
Tank capacity: 2000 ltr
Container (W x D x H): 5,0 x 2,2 x 2,55
Working hour: 0 h
Weight of machine: 11,160 kg
Condition: new
With continuous operation, the performance is reduced by 10%
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Generator type: Leroy Somer LSA 52.3 S5
Motor type: Perkins 4012-46TAG3A
Speed: 1.500 rpm
Voltage: 50 Hz - 230 7 400 V
Control: DSE 8610
Battery voltage: 24
Tank capacity: 2000 ltr
Container (W x D x H): 5,0 x 2,2 x 2,55
Working hour: 0 h
Weight of machine: 11,160 kg
Condition: new
With continuous operation, the performance is reduced by 10%
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
11
Trabajo de metales y máquinas herramientaFresadorasOtros
X: 560 mmY: 500 mmZ: 390 mmRapid: 4 m/minTable load: 800 kgSpeed range: 4000 rpmTaper fixture: SK 40Speed range head stock: 4000 rmpSpindle drive: 4 kWControl: Dialog 11Electrical hand wheel: yesCoolant system: yesDirect path measuring system: yesDocumentation: yesTotal power: 19 kWWeight of machine: 2900 kgSpace requirement (W x D x H): 3,66 x 3,5 x 2,1 mCondition: very goodless operating hours, can be inspected under powerAccessory: complete documentation
X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
12
Trabajo de metales y máquinas herramientaMáquinas de erosión
X: 500 mmY: 295 mmZ: 385 mmC axis: 360 °Mounting table: 780 x 500 mmDistance table to quill: 285 - 660 mmWorkpiece weight: 1200 kgMax. Travel speed X,Y,Z: 600 mm/minClamping system: EROWAC-axis measurement resolution: 0,001 °Electrode changer: 16 -stationElektrode changer: Pick-UpElectrode weight: C-axis 20 kgMax. single electrode weight: 5 kgElectrode changer total load: 40 kgDielectric cooler: yesDielectric filter candles: 3 pcs.Dielectric filling level: 345 mmDielectric fill quantity: 450 l ltrDielectric aggregate: separatelyGenerator: 30 AControl: EROCOM 200Fire-extinguishing systems: yesTotal power: 8 kWWeight of machine: 4400 kgSpace requirement (W x D x H): 2,2 x 3,3 x 2,4 mCondition: very goodchecked by Maho technicians, ready for demonstration under power, instruction / training optionally possibleAccessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
X: 500 mm
Y: 295 mm
Z: 385 mm
C axis: 360 °
Mounting table: 780 x 500 mm
Distance table to quill: 285 - 660 mm
Workpiece weight: 1200 kg
Max. Travel speed X,Y,Z: 600 mm/min
Clamping system: EROWA
C-axis measurement resolution: 0,001 °
Electrode changer: 16 -station
Elektrode changer: Pick-Up
Electrode weight: C-axis 20 kg
Max. single electrode weight: 5 kg
Electrode changer total load: 40 kg
Dielectric cooler: yes
Dielectric filter candles: 3 pcs.
Dielectric filling level: 345 mm
Dielectric fill quantity: 450 l ltr
Dielectric aggregate: separately
Generator: 30 A
Control: EROCOM 200
Fire-extinguishing systems: yes
Total power: 8 kW
Weight of machine: 4400 kg
Space requirement (W x D x H): 2,2 x 3,3 x 2,4 m
Condition: very good
checked by Maho technicians, ready for demonstration under power, instruction / training optionally possible
Accessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Y: 295 mm
Z: 385 mm
C axis: 360 °
Mounting table: 780 x 500 mm
Distance table to quill: 285 - 660 mm
Workpiece weight: 1200 kg
Max. Travel speed X,Y,Z: 600 mm/min
Clamping system: EROWA
C-axis measurement resolution: 0,001 °
Electrode changer: 16 -station
Elektrode changer: Pick-Up
Electrode weight: C-axis 20 kg
Max. single electrode weight: 5 kg
Electrode changer total load: 40 kg
Dielectric cooler: yes
Dielectric filter candles: 3 pcs.
Dielectric filling level: 345 mm
Dielectric fill quantity: 450 l ltr
Dielectric aggregate: separately
Generator: 30 A
Control: EROCOM 200
Fire-extinguishing systems: yes
Total power: 8 kW
Weight of machine: 4400 kg
Space requirement (W x D x H): 2,2 x 3,3 x 2,4 m
Condition: very good
checked by Maho technicians, ready for demonstration under power, instruction / training optionally possible
Accessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
11
Trabajo de metales y máquinas herramientaFresadorasOtros
X: 1050 mmY: 920 mmZ: 110 mmTable size: 1000 x 1000 mmSpeed range: 18.000 rpmTaper fixture: SK 25Tool changer: 6 -stationMax. workpiece dimension: Ø 65 mm, hight 65 mmControl: Bosch CC 120Total power: 12 kWWeight of machine: 900 kgSpace requirement (W x D x H): 1,7 x 1,9 x 2,0 mMilling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shiftAccessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
10
Trabajo de metales y máquinas herramientaMáquinas de soldarOtros
Max. welding current: 200 AMax. welding voltage: 27 VTotal power: 10,6 kWWeight of machine: 88 kgSpace requirement (W x D x H): 0,376 x 0,684 x 0,381 mwith wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción