Veuillez patienter...

2
Flexion modulus: 10 cm³Round tube: 64 x 3 mmStandard steel tube: 64 x 3,3 mmGas tube: 2" x 40 mmStainless steel: 60 x 2 mmHard copper and aluminium: 64 x 4 mmSquare tube: 60 x 60 x 4 mmRect. tube easy way: 40 x 60 x 4 bzw. Ø 60 x 40 x 3 mmRect. tube hard way: 60 x 40 x 3 mmMax. outer diameter: 64 mmMax. bending radius: 200 mmMin. bending radius: 20 mmMax. bending angle: 210 °Motor: 4 kWHydraulic oil capacity: 50 lLength: 4000 mmWidth: 950 mmHeight: 1250 mmWeight: 850 kg
Flexion modulus: 10 cm³
Round tube: 64 x 3 mm
Standard steel tube: 64 x 3,3 mm
Gas tube: 2" x 40 mm
Stainless steel: 60 x 2 mm
Hard copper and aluminium: 64 x 4 mm
Square tube: 60 x 60 x 4 mm
Rect. tube easy way: 40 x 60 x 4 bzw. Ø 60 x 40 x 3 mm
Rect. tube hard way: 60 x 40 x 3 mm
Max. outer diameter: 64 mm
Max. bending radius: 200 mm
Min. bending radius: 20 mm
Max. bending angle: 210 °
Motor: 4 kW
Hydraulic oil capacity: 50 l
Length: 4000 mm
Width: 950 mm
Height: 1250 mm
Weight: 850 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Flexion modulus: 170 cm³Standard steel tube: 150 x 9 mmGas tube: 6" x 7,11 mmFurniture tube: 150 x 9 mmFE35 (for hydraulic tubes): 168,3 x 8,5 mmStainless steel AISI304-318: 141,3 x 6,55 mmStainless steel AISI308 (food industry): 141,3 x 6,55 mmBrass soft: 168,3 x 9 mmHard copper and aluminium: 168,3 x 9 mmSoft copper: 168,3 x 9 mmConduit tube (TAZ): 141,3 x 8 mmMepla, Gebereit and similar: 150 x 6 mmRoundbar solid (S275JO): 110 mmSquarebar solid (S275JO): 90 x 90 mmFlatsteel solid (S275JO): 120 x 60 mmSquare profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mmT-profile (S275JO): 120 x 120 x 10 mmU-profile (S275JO): 120 x 120 x 8 mmMax. bending radius: 800 mmMin. bending radius: 100 mmMin. tube Ø: 10 mmMax. bending speed: 1 r/minMotor: 15 kWLength: 1000 mmWidth: 1900 mmHeight: 1475 mmWeight: 2700 kg
Flexion modulus: 170 cm³
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Flexion modulus: 80 cm³Standard steel tube: 127 x 7,1 mmGas tube: 4" x 8,56 mmFurniture tube: 127 x 7,1 mmFE35 (for hydraulic tubes): 100 x 11 mmStainless steel AISI304-318: 114,3 x 5,6 mmStainless steel AISI308 (food industry): 114,3 x 5,6 mmBrass soft: 139,7 x 8,8 mmHard copper and aluminium: 139,7 x 8,8 mmSoft copper: 139,7 x 8,8 mmConduit tube (TAZ): 120 x 9 mmMepla, Gebereit and similar: 120 x 6.5 mmRoundbar solid (S275JO): 90 mmSquarebar solid (S275JO): 75 x 75 mmFlatsteel solid (S275JO): 100 x 50 mmSquare profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mmT-profile (S275JO): 100 x 100 x 10 mmU-profile (S275JO): 100 x 100 x 10 mmMax. bending radius: 700 mmMin. bending radius: 36 mmMin. tube Ø: 10 mmMax. bending speed: 0 - 0,75 r/minMotor: 3 kWLength: 850 mmWidth: 1200 mmHeight: 850 mmWeight: 720 kg
Flexion modulus: 80 cm³
Standard steel tube: 127 x 7,1 mm
Gas tube: 4" x 8,56 mm
Furniture tube: 127 x 7,1 mm
FE35 (for hydraulic tubes): 100 x 11 mm
Stainless steel AISI304-318: 114,3 x 5,6 mm
Stainless steel AISI308 (food industry): 114,3 x 5,6 mm
Brass soft: 139,7 x 8,8 mm
Hard copper and aluminium: 139,7 x 8,8 mm
Soft copper: 139,7 x 8,8 mm
Conduit tube (TAZ): 120 x 9 mm
Mepla, Gebereit and similar: 120 x 6.5 mm
Roundbar solid (S275JO): 90 mm
Squarebar solid (S275JO): 75 x 75 mm
Flatsteel solid (S275JO): 100 x 50 mm
Square profile (S275JO): 120 x 60 x 9 bzw. 90 x 90 x 10 mm
T-profile (S275JO): 100 x 100 x 10 mm
U-profile (S275JO): 100 x 100 x 10 mm
Max. bending radius: 700 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 0,75 r/min
Motor: 3 kW
Length: 850 mm
Width: 1200 mm
Height: 850 mm
Weight: 720 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Flexion modulus: 43 cm³Standard steel tube: 100 x 6 mmGas tube: 3" 1/2 x 5,74 mmFurniture tube: 100 x 6 mmFE35 (for hydraulic tubes): 100 x 7,5 mmStainless steel AISI304-318: 100 x 3,6 mmStainless steel AISI308 (food industry): 100 x 3,6 mmBrass soft: 114.3 x 6,3 mmHard copper and aluminium: 114,3 x 6,3 mmSoft copper: 114,3 x 6,3 mmConduit tube (TAZ): 100 x 6 mmMepla, Gebereit and similar: 100 x 5 mmRoundbar solid (S275JO): 70 mmSquarebar solid (S275JO): 60 x 60 mmFlatsteel solid (S275JO): 80 x 40 mmSquare profile (S275JO): 100 x 60 x 4 bzw. 90 x 90 x 4 mmT-profile (S275JO): 90 x 90 x 6 mmU-profile (S275JO): 90 x 90 x 6 mmMax. bending radius: 400 mmMin. bending radius: 36 mmMin. tube Ø: 10 mmMax. bending speed: 0 - 1,3 r/minMotor: 2 kWLength: 500 mmWidth: 1200 mmHeight: 850 mmWeight: 480 kg
Flexion modulus: 43 cm³
Standard steel tube: 100 x 6 mm
Gas tube: 3" 1/2 x 5,74 mm
Furniture tube: 100 x 6 mm
FE35 (for hydraulic tubes): 100 x 7,5 mm
Stainless steel AISI304-318: 100 x 3,6 mm
Stainless steel AISI308 (food industry): 100 x 3,6 mm
Brass soft: 114.3 x 6,3 mm
Hard copper and aluminium: 114,3 x 6,3 mm
Soft copper: 114,3 x 6,3 mm
Conduit tube (TAZ): 100 x 6 mm
Mepla, Gebereit and similar: 100 x 5 mm
Roundbar solid (S275JO): 70 mm
Squarebar solid (S275JO): 60 x 60 mm
Flatsteel solid (S275JO): 80 x 40 mm
Square profile (S275JO): 100 x 60 x 4 bzw. 90 x 90 x 4 mm
T-profile (S275JO): 90 x 90 x 6 mm
U-profile (S275JO): 90 x 90 x 6 mm
Max. bending radius: 400 mm
Min. bending radius: 36 mm
Min. tube Ø: 10 mm
Max. bending speed: 0 - 1,3 r/min
Motor: 2 kW
Length: 500 mm
Width: 1200 mm
Height: 850 mm
Weight: 480 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Flexion modulus: 10.5 cm³Standard steel tube: 60 x 3 mmGas tube: 2"Gas x 4 mmFurniture tube: 60 x 4 mmFE35 (for hydraulic tubes): 64 x 4 mmStainless steel AISI304-318: 64 x 3 mmStainless steel AISI308 (food industry): 60 x 4 mmBrass soft: 60 x 4 mmHard copper and aluminium: 64 x 4 mmSoft copper: 64 x 4 mmConduit tube (TAZ): 60 x 4 mmMepla, Gebereit and similar: 50 x 4 mmRoundbar solid (S275JO): 35 mmSquarebar solid (S275JO): 30 x 30 mmFlatsteel solid (S275JO): 10 x 60 mmSquare profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mmT-profile (S275JO): 50 x 50 x 6 mmU-profile (S275JO): 40 x 20 x 6 mmMax. bending radius: 300 mmMin. bending radius: 10 mmMin. tube Ø: 10 mmMax. bending speed: 1,25 / 2,60 r/minMotor: 1 kWLength: 595 mmWidth: 363 mmHeight: 900 mmWeight: 130 kg
Flexion modulus: 10.5 cm³
Standard steel tube: 60 x 3 mm
Gas tube: 2"Gas x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 4 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 4 mm
Brass soft: 60 x 4 mm
Hard copper and aluminium: 64 x 4 mm
Soft copper: 64 x 4 mm
Conduit tube (TAZ): 60 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 10 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,25 / 2,60 r/min
Motor: 1 kW
Length: 595 mm
Width: 363 mm
Height: 900 mm
Weight: 130 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Diamètre de l'arbre : 100 Diamètre des rouleaux : 315 mm Rouleaux entraînés : 3 Puissance moteur : 7,5 kW Vitesse : 7 m/min Position verticale de l'acier plat (section / diamètre min.) : 100x20 mm / 800 mm, 30x10 mm / 400 mm Position horizontale en acier plat (section / diamètre min.) : 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm Barre carrée (section / diamètre min.) : 60x60 mm / 750 mm, 15x15 mm / 400 mm Barre ronde (section / diamètre min.) : Ø 75 mm / 800 mm, Ø 15 mm / 450 mm Tube (section / diamètre min.): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm Position verticale du tube de forme (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm Forme tube carré (section / diamètre min.) : 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm Pied d'angle extérieur (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm Pied d'angle intérieur (section / diamètre min.) : 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm Pied UPN extérieur (section / diamètre min.) : UPN 180 / 900 mm, UPN 30 / 400 mm UPN pied intérieur (section / diamètre min.) : UPN 180 / 1.000 mm, UPN 30 / 400 mm Position horizontale IPN (section / diamètre min.): IPN 180 / 1.000 mm, IPN 80 / 400 mm Longueur : 1465 mm Largeur : 2000 mm Hauteur : 1700 mm Poids : 4000 kg
Diamètre de l'arbre : 100
Diamètre des rouleaux : 315 mm
Rouleaux entraînés : 3
Puissance moteur : 7,5 kW
Vitesse : 7 m/min
Position verticale de l'acier plat (section / diamètre min.) : 100x20 mm / 800 mm, 30x10 mm / 400 mm
Position horizontale en acier plat (section / diamètre min.) : 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Barre carrée (section / diamètre min.) : 60x60 mm / 750 mm, 15x15 mm / 400 mm
Barre ronde (section / diamètre min.) : Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / diamètre min.): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Position verticale du tube de forme (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Forme tube carré (section / diamètre min.) : 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Pied d'angle extérieur (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Pied d'angle intérieur (section / diamètre min.) : 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
Pied UPN extérieur (section / diamètre min.) : UPN 180 / 900 mm, UPN 30 / 400 mm
UPN pied intérieur (section / diamètre min.) : UPN 180 / 1.000 mm, UPN 30 / 400 mm
Position horizontale IPN (section / diamètre min.): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Longueur : 1465 mm
Largeur : 2000 mm
Hauteur : 1700 mm
Poids : 4000 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Shaft diameter: 80Rolls diameter: 260 mmDriven rolls: 3Motor power: 7.5 kWSpeed: 6 m/minFlat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mmFlat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mmSquare bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mmRound bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mmTube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mmForm tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mmForm tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mmAngle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mmAngle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mmUPN leg outside (section / min. diameter): UPN 120 / 800 mmUPN leg inside (section / min. diameter): UPN 120 / 800 mmIPN horizontal position (section / min. diameter): IPN 120 / 800 mmLength: 1150 mmWidth: 1200 mmHeight: 1300 mmWeight: 1600 kg
Shaft diameter: 80
Rolls diameter: 260 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mm
Angle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mm
UPN leg outside (section / min. diameter): UPN 120 / 800 mm
UPN leg inside (section / min. diameter): UPN 120 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 800 mm
Length: 1150 mm
Width: 1200 mm
Height: 1300 mm
Weight: 1600 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Shaft diameter: 80Rolls diameter: 245 mmDriven rolls: 3Motor power: 4 kWSpeed: 6 m/minFlat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mmSquare bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mmRound bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mmTube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mmForm tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mmForm tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mmAngle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mmAngle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mmUPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mmUPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mmIPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mmLength: 1450 mmWidth: 1000 mmHeight: 1400 mmWeight: 1700 kg
Shaft diameter: 80
Rolls diameter: 245 mm
Driven rolls: 3
Motor power: 4 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 100x20 mm / 2000 mm, 80x20 mm / 800 mm, 30x10 / 300
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x5 mm / 300 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 380 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 380 mm, Ø 3"x5,48 / 800 mm, Ø 1/2"x2,77 / 380 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 350 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.300 mm, 25x25x2 mm / 350 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 700 mm, 30x30x3 mm / 450 mm
UPN leg outside (section / min. diameter): UPN 140 / 1600 mm, UPN 120 / 900 mm, UPN 100 / 800 mm
UPN leg inside (section / min. diameter): UPN 140 / 1.600 mm, UPN 120 / 1000 mm, UPN 100 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 600 mm, IPN 80 / 400 mm
Length: 1450 mm
Width: 1000 mm
Height: 1400 mm
Weight: 1700 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Shaft diameter: 60Upper roll diameter: 215 mmLower roll diameter: 215 mmDriven rolls: 3Motor power: 1.5 kWSpeed: 4 m/minFlat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mmFlat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mmSquare bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mmRound bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mmTube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mmForm tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mmForm tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mmAngle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mmAngle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mmLength: 1000 mmWidth: 1400 mmHeight: 1650 mmWeight: 950 kg
Shaft diameter: 60
Upper roll diameter: 215 mm
Lower roll diameter: 215 mm
Driven rolls: 3
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 80x20 mm / 1200 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 120x25 mm / 600 mm, 50 x 10 mm / 400 mm
Square bar (section / min. diameter): 50x50 mm / 800 mm, 20x20 mm / 400 mm
Round bar (section / min. diameter): Ø 50 mm / 800 mm, Ø 20 mm / 400 mm
Tube (section / min. diameter): Ø 100x2 mm / 1600 mm, Ø 60x2 mm / 500 mm, 3"x3,2 mm / 1600 mm, 1"x2,6 mm / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x3 mm / 1400 mm, 40x20x2 mm / 500 mm
Form tube square (section / min. diameter): 70x3 mm / 1600 mm, 40x2 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 70x70x7 mm / 1000 mm, 40x40x5 mm / 500 mm
Angle leg inside (section / min. diameter): 70x70x7 mm / 1200 mm, 40x40x5 mm / 600 mm
Length: 1000 mm
Width: 1400 mm
Height: 1650 mm
Weight: 950 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Max. sheet thickness - mild steel: 8 mmMax. thickness - stainless steel: 5 mmMin. flanging radius: 10Max. blank diameter: 4500 mmMin. blank diameter: 720 mmMax. flanging height: 150 (R 100) / 190 (R 25) mmrotating speed: 0,35 - 0,68 m/sek.Motor: 11 kWLength: 4900 mmWidth: 1700 mmHeight: 2700 mmWeight: 4550 kg
Max. sheet thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Min. flanging radius: 10
Max. blank diameter: 4500 mm
Min. blank diameter: 720 mm
Max. flanging height: 150 (R 100) / 190 (R 25) mm
rotating speed: 0,35 - 0,68 m/sek.
Motor: 11 kW
Length: 4900 mm
Width: 1700 mm
Height: 2700 mm
Weight: 4550 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
X-axis: 1000 mmY-axis: 400 mmPositioning speed: 12 m/minWeight: 300 kg
X-axis: 1000 mm
Y-axis: 400 mm
Positioning speed: 12 m/min
Weight: 300 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleCisailles à section en acier
Punching power: 170 tonMin. angle steel: 40x40x4 mmMax. angle steel: 65x65x7 mmAmount of punching units: 2Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mmCutting power: 350 toMotor: 5 kWMax. pressure: 265 barOiltank: 70 l
Punching power: 170 ton
Min. angle steel: 40x40x4 mm
Max. angle steel: 65x65x7 mm
Amount of punching units: 2
Max. diameter at sheet thickness (mild steel): 25/5 bzw- 18/7 mm
Cutting power: 350 to
Motor: 5 kW
Max. pressure: 265 bar
Oiltank: 70 l


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Punching power: 80 tonThroat depth: 500 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mmStroke: 70 mmStrokes: 40 1/minFlat steel: 450x15 / 300x20 mmAngle steel: 130x130x13 mmRound / square steel: 45 mmNotcher: 12x52x90 mmMotor: 9 kWLength: 2310 mmWidth: 1200 mmHeight: 2050 mmWeight: 2400 kg
Punching power: 80 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2400 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à travailler la tôleCisailles à section en acier
Punching power: 80 tonThroat depth: 300 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mmStroke: 70 mmStrokes: 40 1/minFlat steel: 450x15 / 300x20 mmAngle steel: 130x130x13 mmRound / square steel: 45 mmNotcher: 12x52x90 mmMotor: 9 kWLength: 2310 mmWidth: 1200 mmHeight: 2050 mmWeight: 2070 kg
Punching power: 80 ton
Throat depth: 300 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/14 bzw. 24/24 mm
Stroke: 70 mm
Strokes: 40 1/min
Flat steel: 450x15 / 300x20 mm
Angle steel: 130x130x13 mm
Round / square steel: 45 mm
Notcher: 12x52x90 mm
Motor: 9 kW
Length: 2310 mm
Width: 1200 mm
Height: 2050 mm
Weight: 2070 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Punching power: 55 tonThroat depth: 500 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mmStroke: 20 mmStrokes: 37 1/minFlat steel: 300x15 / 200x20 mmNotcher: 10x42x90 mmMotor: 5 kWLength: 2100 mmWidth: 1160 mmHeight: 2090 mmWeight: 1750 kg
Punching power: 55 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleCisailles à section en acier
Punching power: 36 tonThroat depth: 170 mmNumber of stations: 3Max. diameter at sheet thickness (mild steel): 27x10 mmStroke: 15 mmStrokes: 24 1/minFlat steel: 350x6 mmAngle steel: 80x8 mmMotor: 2 kWLength: 1100 mmWidth: 800 mmHeight: 1400 mmWeight: 485 kg
Punching power: 36 ton
Throat depth: 170 mm
Number of stations: 3
Max. diameter at sheet thickness (mild steel): 27x10 mm
Stroke: 15 mm
Strokes: 24 1/min
Flat steel: 350x6 mm
Angle steel: 80x8 mm
Motor: 2 kW
Length: 1100 mm
Width: 800 mm
Height: 1400 mm
Weight: 485 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Axe X : 6000 mm Min. largeur de l'acier plat : 40 mm Max. longueur de l'acier plat : 6000 mm Max. poids de l'acier plat : 600 kg Min. longueur de la pièce restante : 180 mm
Axe X : 6000 mm
Min. largeur de l'acier plat : 40 mm
Max. longueur de l'acier plat : 6000 mm
Max. poids de l'acier plat : 600 kg
Min. longueur de la pièce restante : 180 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Puissance de poinçonnage : 85 tonnes Profondeur de gorge : 500 mm Nombre de postes : 5 Max. diamètre à l'épaisseur de la tôle (acier doux): 40/15 bzw. 24x24mm Acier plat : 450x15 / 450x18 mm Longueur de la lame : 475 mm Angle acier : 130x130x13 mm Acier rond / carré : 45/40 mm Encoche : 12 mm Unité de pliage : 200x12 mm Moteur : 9kW Longueur : 2300 mm Largeur : 1200 mm Hauteur : 2100 mm Poids : 2400 kg
Puissance de poinçonnage : 85 tonnes
Profondeur de gorge : 500 mm
Nombre de postes : 5
Max. diamètre à l'épaisseur de la tôle (acier doux): 40/15 bzw. 24x24mm
Acier plat : 450x15 / 450x18 mm
Longueur de la lame : 475 mm
Angle acier : 130x130x13 mm
Acier rond / carré : 45/40 mm
Encoche : 12 mm
Unité de pliage : 200x12 mm
Moteur : 9kW
Longueur : 2300 mm
Largeur : 1200 mm
Hauteur : 2100 mm
Poids : 2400 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Puissance de poinçonnage : 85 tonnes Profondeur de gorge : 300 mm Nombre de postes : 5 Max. diamètre à l'épaisseur de la tôle (acier doux): 40/15 bzw. 24x24mm Acier plat : 450x15 / 450x18 mm Longueur de la lame : 475 mm Angle acier : 130x130x13 mm Acier rond / carré : 45/40 mm Encoche : 12 mm Unité de pliage : 200x12 mm Moteur : 9kW Longueur : 2300 mm Largeur : 1200 mm Hauteur : 2100 mm Poids : 2400 kg
Puissance de poinçonnage : 85 tonnes
Profondeur de gorge : 300 mm
Nombre de postes : 5
Max. diamètre à l'épaisseur de la tôle (acier doux): 40/15 bzw. 24x24mm
Acier plat : 450x15 / 450x18 mm
Longueur de la lame : 475 mm
Angle acier : 130x130x13 mm
Acier rond / carré : 45/40 mm
Encoche : 12 mm
Unité de pliage : 200x12 mm
Moteur : 9kW
Longueur : 2300 mm
Largeur : 1200 mm
Hauteur : 2100 mm
Poids : 2400 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Punching power: 60 tonThroat depth: 500 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40x11 mmStroke: 32 mmFlat steel: 350x15 mmAngle steel: 120x10 mmRound / square steel: 45/40 mmBending unit: 150x10 mmMotor: 5 kWLength: 1950 mmWidth: 2000 mmHeight: 1900 mmWeight: 1900 kg
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40x11 mm
Stroke: 32 mm
Flat steel: 350x15 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Motor: 5 kW
Length: 1950 mm
Width: 2000 mm
Height: 1900 mm
Weight: 1900 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Punching power: 60 tonThroat depth: 500 mmNumber of stations: 5Cylinder: 2Max. diameter at sheet thickness (mild steel): 40x11 mmFlat steel: 350x10 mmAngle steel: 120x10 mmRound / square steel: 45/40 mmBending unit: 150x10 mm
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Bending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 6No. of driven linkage assemblies: 6Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 5550 mmLength with electrical shear: 6200 mmWidth: 1435 mmHeight: 1460 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Bending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.25 mmCutting capacity electrical shear: 1.25 - 1.5 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 2 kWLength with hand shear: 5550 mmLength with electrical shear: 6200 mmWidth: 1435 mmHeight: 1460 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 8020 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 6No. of driven linkage assemblies: 6Sheet insertion depth: 1000 mm
Bending length: 8020 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1000 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 6400 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 2 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 7No. of driven linkage assemblies: 7Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1000 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 6400 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 6400 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.25 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 4No. of driven linkage assemblies: 4Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 5010 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmNo. of stand and tension arm units: 4No. of driven linkage assemblies: 4Sheet insertion depth: 1000 mm
Bending length: 5010 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 4010 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 2 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1000 mm
Bending length: 4010 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1000 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 4010 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 3No. of driven linkage assemblies: 3Sheet insertion depth: 1000 mm
Bending length: 4010 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 3
No. of driven linkage assemblies: 3
Sheet insertion depth: 1000 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 6200 mmBending capacity Alu 190 N/mm²: 3 mmBending capacity steel 400 N/mm²: 2 mmNo. of stand and tension arm units: 10No. of driven linkage assemblies: 10Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmLength with hand shear: 6550 mmLength with electrical shear: 7200 mmWidth: 1435 mmHeight: 1460 mm
Bending length: 6200 mm
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 10
No. of driven linkage assemblies: 10
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 6550 mm
Length with electrical shear: 7200 mm
Width: 1435 mm
Height: 1460 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 6200 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmNo. of stand and tension arm units: 7No. of driven linkage assemblies: 7Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 4 kWLength with hand shear: 6730 mmLength with electrical shear: 7380 mmWidth: 1435 mmHeight: 1460 mmWeight: 3800 kg
Bending length: 6200 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 4 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3800 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 6200 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.25 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 6730 mmLength with electrical shear: 7380 mmWidth: 1435 mmHeight: 1460 mmWeight: 3200 kg
Bending length: 6200 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.25 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 5020 mmBending capacity Alu 190 N/mm²: 3 mmBending capacity steel 400 N/mm²: 2 mmNo. of stand and tension arm units: 7No. of driven linkage assemblies: 7Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmLength with hand shear: 5550 mmLength with electrical shear: 6200 mmWidth: 1435 mmHeight: 1460 mm
Bending length: 5020 mm
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending capacity Alu 190 N/mm²: 4 mmBending capacity steel 400 N/mm²: 3 mmNo. of stand and tension arm units: 6No. of driven linkage assemblies: 6Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2900 kg
Bending capacity Alu 190 N/mm²: 4 mm
Bending capacity steel 400 N/mm²: 3 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 4010 mmBending capacity Alu 190 N/mm²: 3 mmBending capacity steel 400 N/mm²: 2 mmNo. of stand and tension arm units: 7No. of driven linkage assemblies: 7Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2900 kg
Bending length: 4010 mm
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Bending length: 4010 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2900 kg
Bending length: 4010 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Punching power: 30 tonWorking area: 2500x1250 mmX-axis movement (+repositioning): 2500 mmY-axis movement: 1250 mmspeed of X-axis: 116 m/Minspeed of Y-axis: 80 m/minspeed combined X+Y: 140 m/minStroke: 40 mmMax. strokes (in 1 mm steps, 1 mm thickness): 1200 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 425 1/minMax. strokes at marking: 3200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 22 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 120 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 15 kWHeight: 2310 mmWidth without light barrier: 5360 mmWidth with light barrier: 7360 mmLength without light barrier: 5750 mmLength with light barrier: 6800 mmWeight: 12960 kg
Punching power: 30 ton
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Punching power: 20 tonWorking area: 2000x1250 mmX-axis movement (+repositioning): 2000 mmY-axis movement: 1250 mmspeed of X-axis: 90 m/Minspeed of Y-axis: 70 m/minspeed combined X+Y: 114 m/minMax. strokes (in 1 mm steps, 1 mm thickness): 1100 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 375 1/minMax. strokes at marking: 1200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 30 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 100 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 7.5 kWHeight: 2310 mmWidth without light barrier: 4200 mmWidth with light barrier: 6200 mmLength without light barrier: 5600 mmLength with light barrier: 6600 mmWeight: 11000 kg
Punching power: 20 ton
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Weight: 11000 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Bending length: 1020 mmSheet thickness (420 N/mm²): 2.5 mmMax. bending angle: 135 °Length: 1348 mmWidth: 850 mmHeight: 1175 mmWeight: 285 kg
Bending length: 1020 mm
Sheet thickness (420 N/mm²): 2.5 mm
Max. bending angle: 135 °
Length: 1348 mm
Width: 850 mm
Height: 1175 mm
Weight: 285 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Bending length: 3100 mmSheet thickness (420 N/mm²): 2 mmSheet thickness (600 N/mm²): 1.2 mmMax. bending angle: 135 °Motor: 5 kWLength: 4370 mmWidth: 1770 mmHeight: 1790 mm
Bending length: 3100 mm
Sheet thickness (420 N/mm²): 2 mm
Sheet thickness (600 N/mm²): 1.2 mm
Max. bending angle: 135 °
Motor: 5 kW
Length: 4370 mm
Width: 1770 mm
Height: 1790 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Bending length: 2540 mmSheet thickness (420 N/mm²): 3.5 mmSheet thickness (600 N/mm²): 2.5 mmMax. bending angle: 135 °Motor: 3 kWLength: 3850 mmWidth: 1700 mmHeight: 1860 mmWeight: 3700 kg
Bending length: 2540 mm
Sheet thickness (420 N/mm²): 3.5 mm
Sheet thickness (600 N/mm²): 2.5 mm
Max. bending angle: 135 °
Motor: 3 kW
Length: 3850 mm
Width: 1700 mm
Height: 1860 mm
Weight: 3700 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Bending length: 4010 mmSheet thickness (420 N/mm²): 3.5 mmSheet thickness (600 N/mm²): 2.5 mmMax. bending angle: 135 °Motor: 3 kWLength: 5600 mmWidth: 1800 mmHeight: 2050 mmWeight: 6100 kg
Bending length: 4010 mm
Sheet thickness (420 N/mm²): 3.5 mm
Sheet thickness (600 N/mm²): 2.5 mm
Max. bending angle: 135 °
Motor: 3 kW
Length: 5600 mm
Width: 1800 mm
Height: 2050 mm
Weight: 6100 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Bending length: 4010 mmSheet thickness (420 N/mm²): 2 mmSheet thickness (600 N/mm²): 1.2 mmMax. bending angle: 135 °Motor: 2 kWLength: 5600 mmWidth: 1750 mmHeight: 2050 mmWeight: 4600 kg
Bending length: 4010 mm
Sheet thickness (420 N/mm²): 2 mm
Sheet thickness (600 N/mm²): 1.2 mm
Max. bending angle: 135 °
Motor: 2 kW
Length: 5600 mm
Width: 1750 mm
Height: 2050 mm
Weight: 4600 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Bending length: 3100 mmSheet thickness (420 N/mm²): 6.5 mmSheet thickness (600 N/mm²): 4 mmMax. bending angle: 135 °Motor: 7 kWLength: 4500 mmWidth: 1750 mmHeight: 2050 mmWeight: 6800 kg
Bending length: 3100 mm
Sheet thickness (420 N/mm²): 6.5 mm
Sheet thickness (600 N/mm²): 4 mm
Max. bending angle: 135 °
Motor: 7 kW
Length: 4500 mm
Width: 1750 mm
Height: 2050 mm
Weight: 6800 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Bending length: 2035 mmSheet thickness (420 N/mm²): 4.5 mmSheet thickness (600 N/mm²): 3 mmMax. bending angle: 135 °Motor: 5.5 kWLength: 3300 mmWidth: 1550 mmHeight: 1900 mmWeight: 3200 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 4.5 mm
Sheet thickness (600 N/mm²): 3 mm
Max. bending angle: 135 °
Motor: 5.5 kW
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Bending length: 2035 mmSheet thickness (420 N/mm²): 3.5 mmSheet thickness (600 N/mm²): 2.5 mmMax. bending angle: 135 °Motor: 3.7 kWLength: 3000 mmWidth: 1100 mmHeight: 1750 mmWeight: 2450 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 3.5 mm
Sheet thickness (600 N/mm²): 2.5 mm
Max. bending angle: 135 °
Motor: 3.7 kW
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2450 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Bending force: 40 toBending length: 2000 mmAxes: X and Y axisStroke: 100 mmDaylight: 310 mmPower concept: hydraulicOiltank: 38 lMotor: 6 kWBack gauge: 420 mmDie: 1Geschwindigkeit: 10 mm/sRetraction speed: 12 mm/sBack gauge speed: 40 mm/sAccuracy press beam: 0.02 +/- mmBack gauge accuracy: 0.05 +/- mmLength: 1750 mmWidth: 950 mmHeight: 1900 mmWeight: 2100 kg
Bending force: 40 to
Bending length: 2000 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 2100 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Bending force: 40 toBending length: 800 mmAxes: X and Y axisStroke: 100 mmDaylight: 310 mmPower concept: hydraulicOiltank: 38 lMotor: 6 kWBack gauge: 420 mmDie: 1Geschwindigkeit: 10 mm/sRetraction speed: 12 mm/sBack gauge speed: 40 mm/sAccuracy press beam: 0.02 +/- mmBack gauge accuracy: 0.05 +/- mmLength: 1750 mmWidth: 950 mmHeight: 1900 mmWeight: 1640 kg
Bending force: 40 to
Bending length: 800 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 1640 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Force de flexion : 40 à Longueur de pliage : 1500 mm Axes : axes X et Y vitesse rapide axe Y : 150 mm/s Course : 160 mm Distance intérieure entre les cadres latéraux : 1100 mm Espace dans le cadre latéral : 320 mm Lumière du jour : 390 mm Concept de puissance : hydraulique Vitesse de travail axe Y : 10 Axe X de la course de la butée arrière : 500 mm Puissance moteur : 4 kW Longueur : 1700 mm Largeur : 1600 mm Hauteur : 2230 mm Poids : 3450kg
Force de flexion : 40 à
Longueur de pliage : 1500 mm
Axes : axes X et Y
vitesse rapide axe Y : 150 mm/s
Course : 160 mm
Distance intérieure entre les cadres latéraux : 1100 mm
Espace dans le cadre latéral : 320 mm
Lumière du jour : 390 mm
Concept de puissance : hydraulique
Vitesse de travail axe Y : 10
Axe X de la course de la butée arrière : 500 mm
Puissance moteur : 4 kW
Longueur : 1700 mm
Largeur : 1600 mm
Hauteur : 2230 mm
Poids : 3450kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.

Sauvegarder la recherche
  • Vous recevrez gratuitement les nouvelles offres par e-mail
  • Vous pouvez mettre fin à la demande de recherche à tout moment
  • Votre adresse électronique ne sera en aucun cas transmise à des tiers
Faites de la publicité ici.
Contactez-nous pour un devis sans engagement.

Obtenir un devis
Vous n`êtes pas encore inscrit ?

Cliquez sur le bouton "Plus d`informations" pour vous informer de nos services et de nos prix.

Pour chacun de nos tarifs proposés, il existe une période d`essai de 6 mois. Essayez-nous gratuitement !

Inscrivez-vous maintenant gratuitement