1
Travail des métaux et machines-outilsPressesPresses d'essai
Bending force: 150 toStroke: 300 mmDistance between columns: 1570 mmPiston diameter: 280x200 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 2500 mmWidth: 1000 mmHeight: 2270 mmWeight: 2100 kg
Bending force: 150 to
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2500 mm
Width: 1000 mm
Height: 2270 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2500 mm
Width: 1000 mm
Height: 2270 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPressesPresses d'essai
Bending force: 150 toStroke: 300 mmDistance between columns: 1070 mmPiston diameter: 280x200 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 2050 mmWidth: 1000 mmHeight: 2270 mmWeight: 1870 kg
Bending force: 150 to
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2050 mm
Width: 1000 mm
Height: 2270 mm
Weight: 1870 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2050 mm
Width: 1000 mm
Height: 2270 mm
Weight: 1870 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPressesPresses d'essai
Bending force: 100 toStroke: 300 mmDistance between columns: 1070 mmPiston diameter: 220x160 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 2050 mmWidth: 1000 mmHeight: 2200 mmWeight: 1500 kg
Bending force: 100 to
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2050 mm
Width: 1000 mm
Height: 2200 mm
Weight: 1500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2050 mm
Width: 1000 mm
Height: 2200 mm
Weight: 1500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPressesPresses d'essai
Bending force: 30 toStroke: 775 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 1500 mmWidth: 700 mmHeight: 2015 mmWeight: 400 kg
Bending force: 30 to
Stroke: 775 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 2015 mm
Weight: 400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 775 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 2015 mm
Weight: 400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsPressesPresses d'essai
Bending force: 100 toBending length: 1500 mmStroke: 300 mmDistance between columns: 1520 mmDistance between table and toolholder: 680 mmRapid speed: 10 mm/sWorking speed: 5 mm/sMax. bending capacity (mild steel): 6 mmTable: 500x1520 mmHole in table: 100 mmHole distance: 190 mmLength: 2630 mmWidth: 1000 mmHeight: 2275 mmWeight: 2500 kg
Bending force: 100 to
Bending length: 1500 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 680 mm
Rapid speed: 10 mm/s
Working speed: 5 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 1500 mm
Stroke: 300 mm
Distance between columns: 1520 mm
Distance between table and toolholder: 680 mm
Rapid speed: 10 mm/s
Working speed: 5 mm/s
Max. bending capacity (mild steel): 6 mm
Table: 500x1520 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2275 mm
Weight: 2500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à cintrer les tuyauteries
Flexion modulus: 170 cm³Standard steel tube: 150 x 9 mmGas tube: 6" x 7,11 mmFurniture tube: 150 x 9 mmFE35 (for hydraulic tubes): 168,3 x 8,5 mmStainless steel AISI304-318: 141,3 x 6,55 mmStainless steel AISI308 (food industry): 141,3 x 6,55 mmBrass soft: 168,3 x 9 mmHard copper and aluminium: 168,3 x 9 mmSoft copper: 168,3 x 9 mmConduit tube (TAZ): 141,3 x 8 mmMepla, Gebereit and similar: 150 x 6 mmRoundbar solid (S275JO): 110 mmSquarebar solid (S275JO): 90 x 90 mmFlatsteel solid (S275JO): 120 x 60 mmSquare profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mmT-profile (S275JO): 120 x 120 x 10 mmU-profile (S275JO): 120 x 120 x 8 mmMax. bending radius: 800 mmMin. bending radius: 100 mmMin. tube Ø: 10 mmMax. bending speed: 1 r/minMotor: 15 kWLength: 1000 mmWidth: 1900 mmHeight: 1475 mmWeight: 2700 kg
Flexion modulus: 170 cm³
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses
Shaft diameter: 80Rolls diameter: 260 mmDriven rolls: 3Motor power: 7.5 kWSpeed: 6 m/minFlat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mmFlat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mmSquare bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mmRound bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mmTube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mmForm tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mmForm tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mmAngle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mmAngle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mmUPN leg outside (section / min. diameter): UPN 120 / 800 mmUPN leg inside (section / min. diameter): UPN 120 / 800 mmIPN horizontal position (section / min. diameter): IPN 120 / 800 mmLength: 1150 mmWidth: 1200 mmHeight: 1300 mmWeight: 1600 kg
Shaft diameter: 80
Rolls diameter: 260 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mm
Angle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mm
UPN leg outside (section / min. diameter): UPN 120 / 800 mm
UPN leg inside (section / min. diameter): UPN 120 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 800 mm
Length: 1150 mm
Width: 1200 mm
Height: 1300 mm
Weight: 1600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Rolls diameter: 260 mm
Driven rolls: 3
Motor power: 7.5 kW
Speed: 6 m/min
Flat steel vertical position (section / min. diameter): 80x15 mm / 800 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 125x25 mm / 600 mm, 60x8 mm / 400 mm
Square bar (section / min. diameter): 45x45 mm / 500 mm, 15x15 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 600 mm, Ø 15 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.200 mm, Ø 15x1 mm / 350 mm, Ø 3"x5,48 / 800 mm, Ø 3/8"x1,65 / 400 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x25x3 mm / 800 mm, 25x15x2 mm / 400 mm
Form tube square (section / min. diameter): 70x70x3 mm / 1.400 mm, 40x40x2 mm / 800 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x80x8 mm / 800 mm, 40x40x4 mm / 400 mm
Angle leg inside (section / min. diameter): 80x80x8 mm / 1.000 mm, 40x40x4 mm / 400 mm
UPN leg outside (section / min. diameter): UPN 120 / 800 mm
UPN leg inside (section / min. diameter): UPN 120 / 800 mm
IPN horizontal position (section / min. diameter): IPN 120 / 800 mm
Length: 1150 mm
Width: 1200 mm
Height: 1300 mm
Weight: 1600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de bordage
Max. sheet thickness - mild steel: 8 mmMax. thickness - stainless steel: 5 mmMin. flanging radius: 10Max. blank diameter: 4500 mmMin. blank diameter: 720 mmMax. flanging height: 150 (R 100) / 190 (R 25) mmrotating speed: 0,35 - 0,68 m/sek.Motor: 11 kWLength: 4900 mmWidth: 1700 mmHeight: 2700 mmWeight: 4550 kg
Max. sheet thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Min. flanging radius: 10
Max. blank diameter: 4500 mm
Min. blank diameter: 720 mm
Max. flanging height: 150 (R 100) / 190 (R 25) mm
rotating speed: 0,35 - 0,68 m/sek.
Motor: 11 kW
Length: 4900 mm
Width: 1700 mm
Height: 2700 mm
Weight: 4550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. thickness - stainless steel: 5 mm
Min. flanging radius: 10
Max. blank diameter: 4500 mm
Min. blank diameter: 720 mm
Max. flanging height: 150 (R 100) / 190 (R 25) mm
rotating speed: 0,35 - 0,68 m/sek.
Motor: 11 kW
Length: 4900 mm
Width: 1700 mm
Height: 2700 mm
Weight: 4550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 860 mmDistance between centers: 1500 mmCentre height: 430 mmSpindle bore: 132 mmswing over cross slide: 620 mmWidth of bed: 560 mmSpindle nose / DIN55027: 11Spindle taper: 140 MSpindle speed steps: 17Spindle revs: Array rpmNumber of feeds: 150Longitudinal feed range: 0.039 - 18 mm/rCross feed range: 0.02 - 9 mm/rMetric thread range: 0.5 - 180 mmInch thread range: 60 - 1/6 TpiModule thread range: 0.125 - 45DP thread range: 240Cross slide travel: 435 mmTop slide travel: 150 mmTailstock quill diameter: 105 mmTailstock quill taper: 6 MKTailstock travel: 225 mmMotor power: 15 kWWeight: 4650 kg
Swing over bed: 860 mm
Distance between centers: 1500 mm
Centre height: 430 mm
Spindle bore: 132 mm
swing over cross slide: 620 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: Array rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: 240
Cross slide travel: 435 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4650 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 430 mm
Spindle bore: 132 mm
swing over cross slide: 620 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: Array rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: 240
Cross slide travel: 435 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4650 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 1320 mmDistance between centers: 1500 mmCentre height: 625 mmSpindle bore: 155 mmswing over cross slide: 940 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MRevs continuous variable in gear steps: 4Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 U/min rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 1/16 - 60 TpiModule thread range: 0.125 - 120DP thread range: 1 - 240Cross slide travel: 685 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmMotor power: 30 kWWeight: 8550 kg
Swing over bed: 1320 mm
Distance between centers: 1500 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 U/min rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 1/16 - 60 Tpi
Module thread range: 0.125 - 120
DP thread range: 1 - 240
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 U/min rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 1/16 - 60 Tpi
Module thread range: 0.125 - 120
DP thread range: 1 - 240
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 1320 mmDistance between centers: 1500 mmCentre height: 625 mmSpindle bore: 155 mmswing over cross slide: 940 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MSpindle speed steps: 5 - 1000Number of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120DP thread range: 1 - 240Cross slide travel: 685 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmWeight: 8550 kg
Swing over bed: 1320 mm
Distance between centers: 1500 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 5 - 1000
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 1 - 240
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 5 - 1000
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 1 - 240
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 1090 mmDistance between centers: 1500 mmCentre height: 500 mmSpindle bore: 155 mmswing over cross slide: 690 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MRevs continuous variable in gear steps: 4Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120DP thread range: 240Cross slide travel: 525 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmMotor power: 30 kWWeight: 8050 kg
Swing over bed: 1090 mm
Distance between centers: 1500 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsTours
Swing over bed: 1090 mmDistance between centers: 1500 mmCentre height: 500 mmSpindle bore: 155 mmswing over cross slide: 690 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MSpindle speed steps: 24Spindle revs: Array rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120Cross slide travel: 525 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmWeight: 8050 kg
Swing over bed: 1090 mm
Distance between centers: 1500 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 890 mmDistance between centers: 1500 mmCentre height: 400 mmSpindle bore: 155 mmswing over cross slide: 490 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MRevs continuous variable in gear steps: 4Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120Cross slide travel: 525 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmMotor power: 30 kWWeight: 7500 kg
Swing over bed: 890 mm
Distance between centers: 1500 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 890 mmDistance between centers: 1500 mmCentre height: 400 mmSpindle bore: 155 mmswing over cross slide: 490 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MSpindle speed steps: 24Spindle revs: Array rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120Cross slide travel: 525 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmMotor power: 22 kWWeight: 7500 kg
Swing over bed: 890 mm
Distance between centers: 1500 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsTours
Swing over bed: 325 mmDistance between centers: 1000 mmCentre height: 165 mmSpindle bore: 32 mmswing over cross slide: 190 mmWidth of bed: 200 mmSpindle nose / DIN55027: 5Spindle taper: 4 MSpindle speed steps: 12Spindle revs: Array rpmNumber of feeds: 48Longitudinal feed range: 0.006 - 1.77 mm/rCross feed range: 0.003 - 0.885 mm/rMetric thread range: 0.1 - 28 mmInch thread range: Array TpiModule thread range: 0.1 - 1.75DP thread range: 4 - 70Cross slide travel: 150 mmTop slide travel: 95 mmTailstock quill diameter: 40 mmTailstock quill taper: 3 MKTailstock travel: 100 mmMotor power: 2.2 kWWeight: 770 kg
Swing over bed: 325 mm
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: 4 - 70
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Weight: 770 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: 4 - 70
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Weight: 770 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleCisailles à section en acier
Punching power: 60 tonThroat depth: 500 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40x11 mmStroke: 32 mmFlat steel: 350x15 mmAngle steel: 120x10 mmRound / square steel: 45/40 mmBending unit: 150x10 mmMotor: 5 kWLength: 1950 mmWidth: 2000 mmHeight: 1900 mmWeight: 1900 kg
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40x11 mm
Stroke: 32 mm
Flat steel: 350x15 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Motor: 5 kW
Length: 1950 mm
Width: 2000 mm
Height: 1900 mm
Weight: 1900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40x11 mm
Stroke: 32 mm
Flat steel: 350x15 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
Motor: 5 kW
Length: 1950 mm
Width: 2000 mm
Height: 1900 mm
Weight: 1900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleCisailles à section en acier
Punching power: 60 tonThroat depth: 500 mmNumber of stations: 5Cylinder: 2Max. diameter at sheet thickness (mild steel): 40x11 mmFlat steel: 350x10 mmAngle steel: 120x10 mmRound / square steel: 45/40 mmBending unit: 150x10 mm
Punching power: 60 ton
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Throat depth: 500 mm
Number of stations: 5
Cylinder: 2
Max. diameter at sheet thickness (mild steel): 40x11 mm
Flat steel: 350x10 mm
Angle steel: 120x10 mm
Round / square steel: 45/40 mm
Bending unit: 150x10 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsPressesPresses excentriques
Bending force: 200 toTonnage rating point: 7 mmTable length: 1350 mmTable width: 800 mmHole in table: 250 mmStroke: 18 - 180 mmStrokes: 35 - 50 1/minRam: 900x570 mmRam guides: 8Ram adjustment: 110 mmThroat depth: 410 mmDistance between columns: 820 mmMotor: 22 kWLength: 1500 mmWidth: 2633 mmHeight: 3950 mmWeight: 20000 kg
Bending force: 200 to
Tonnage rating point: 7 mm
Table length: 1350 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 18 - 180 mm
Strokes: 35 - 50 1/min
Ram: 900x570 mm
Ram guides: 8
Ram adjustment: 110 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 22 kW
Length: 1500 mm
Width: 2633 mm
Height: 3950 mm
Weight: 20000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Tonnage rating point: 7 mm
Table length: 1350 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 18 - 180 mm
Strokes: 35 - 50 1/min
Ram: 900x570 mm
Ram guides: 8
Ram adjustment: 110 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 22 kW
Length: 1500 mm
Width: 2633 mm
Height: 3950 mm
Weight: 20000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsPressesPresses excentriques
Bending force: 125 toTonnage rating point: 5.5 mmTable length: 1100 mmTable width: 630 mmHole in table: 180 mmStroke: 15 - 150 mmStrokes: 42 - 65 1/minRam: 700x400 mmRam guides: 8Ram adjustment: 90 mmThroat depth: 320 mmDistance between columns: 610 mmMotor: 15 kWLength: 1400 mmWidth: 2200 mmHeight: 3120 mmWeight: 12500 kg
Bending force: 125 to
Tonnage rating point: 5.5 mm
Table length: 1100 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 150 mm
Strokes: 42 - 65 1/min
Ram: 700x400 mm
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 610 mm
Motor: 15 kW
Length: 1400 mm
Width: 2200 mm
Height: 3120 mm
Weight: 12500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Tonnage rating point: 5.5 mm
Table length: 1100 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 150 mm
Strokes: 42 - 65 1/min
Ram: 700x400 mm
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 610 mm
Motor: 15 kW
Length: 1400 mm
Width: 2200 mm
Height: 3120 mm
Weight: 12500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPressesPresses excentriques
Force de flexion : 63 à
Longueur table : 750 mm
Largeur table : 500 mm
Trou dans la table : 170 mm
Course : 4 - 102 mm
Coups : 54 1/min
Bélier : 490x325 mm
Réglage du vérin : 90 mm
Profondeur de gorge : 270 mm
Distance entre colonnes : 440 mm
Moteur : 7kW
Longueur : 1800 mm
Largeur : 1150 mm
Hauteur : 2750 mm
Poids : 4100 kg
Force de flexion : 63 à
Longueur table : 750 mm
Largeur table : 500 mm
Trou dans la table : 170 mm
Course : 4 - 102 mm
Coups : 54 1/min
Bélier : 490x325 mm
Réglage du vérin : 90 mm
Profondeur de gorge : 270 mm
Distance entre colonnes : 440 mm
Moteur : 7kW
Longueur : 1800 mm
Largeur : 1150 mm
Hauteur : 2750 mm
Poids : 4100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Longueur table : 750 mm
Largeur table : 500 mm
Trou dans la table : 170 mm
Course : 4 - 102 mm
Coups : 54 1/min
Bélier : 490x325 mm
Réglage du vérin : 90 mm
Profondeur de gorge : 270 mm
Distance entre colonnes : 440 mm
Moteur : 7kW
Longueur : 1800 mm
Largeur : 1150 mm
Hauteur : 2750 mm
Poids : 4100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPressesPresses excentriques
Bending force: 40 toTonnage rating point: 2.5 mmTable length: 450 mmTable width: 650 mmHole in table: 150 mmStroke: 1 - 80 mmStrokes: 125 1/minRam guides: 4Ram adjustment: 75 mmRam hole: 40 mmThroat depth: 225 mmDaylight: 300 mmMotor: 4 kWLength: 1350 mmWidth: 1370 mmHeight: 2160 mmWeight: 2100 kg
Bending force: 40 to
Tonnage rating point: 2.5 mm
Table length: 450 mm
Table width: 650 mm
Hole in table: 150 mm
Stroke: 1 - 80 mm
Strokes: 125 1/min
Ram guides: 4
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 225 mm
Daylight: 300 mm
Motor: 4 kW
Length: 1350 mm
Width: 1370 mm
Height: 2160 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Tonnage rating point: 2.5 mm
Table length: 450 mm
Table width: 650 mm
Hole in table: 150 mm
Stroke: 1 - 80 mm
Strokes: 125 1/min
Ram guides: 4
Ram adjustment: 75 mm
Ram hole: 40 mm
Throat depth: 225 mm
Daylight: 300 mm
Motor: 4 kW
Length: 1350 mm
Width: 1370 mm
Height: 2160 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à grignoter
Punching power: 30 tonWorking area: 2500x1250 mmX-axis movement (+repositioning): 2500 mmY-axis movement: 1250 mmspeed of X-axis: 116 m/Minspeed of Y-axis: 80 m/minspeed combined X+Y: 140 m/minStroke: 40 mmMax. strokes (in 1 mm steps, 1 mm thickness): 1200 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 425 1/minMax. strokes at marking: 3200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 22 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 120 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 15 kWHeight: 2310 mmWidth without light barrier: 5360 mmWidth with light barrier: 7360 mmLength without light barrier: 5750 mmLength with light barrier: 6800 mmWeight: 12960 kg
Punching power: 30 ton
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à grignoter
Punching power: 20 tonWorking area: 2000x1250 mmX-axis movement (+repositioning): 2000 mmY-axis movement: 1250 mmspeed of X-axis: 90 m/Minspeed of Y-axis: 70 m/minspeed combined X+Y: 114 m/minMax. strokes (in 1 mm steps, 1 mm thickness): 1100 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 375 1/minMax. strokes at marking: 1200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 30 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 100 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 7.5 kWHeight: 2310 mmWidth without light barrier: 4200 mmWidth with light barrier: 6200 mmLength without light barrier: 5600 mmLength with light barrier: 6600 mmWeight: 11000 kg
Punching power: 20 ton
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Weight: 11000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Weight: 11000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsPressesPresses d'essai
Bending force: 150 toBending length: 1520 mmStroke: 300 mmPower concept: hydraulicMotor: 11 kWDistance between table and toolholder: 610 mmDistance between columns: 1520 mmWorking speed: 5 mm/sRapid speed: 9 mm/sMax. bending capacity (mild steel): 10 mmHole in table: 100 mmHole distance: 190 mmLength: 2630 mmWidth: 1000 mmHeight: 2450 mmWeight: 3270 kg
Bending force: 150 to
Bending length: 1520 mm
Stroke: 300 mm
Power concept: hydraulic
Motor: 11 kW
Distance between table and toolholder: 610 mm
Distance between columns: 1520 mm
Working speed: 5 mm/s
Rapid speed: 9 mm/s
Max. bending capacity (mild steel): 10 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 1520 mm
Stroke: 300 mm
Power concept: hydraulic
Motor: 11 kW
Distance between table and toolholder: 610 mm
Distance between columns: 1520 mm
Working speed: 5 mm/s
Rapid speed: 9 mm/s
Max. bending capacity (mild steel): 10 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2630 mm
Width: 1000 mm
Height: 2450 mm
Weight: 3270 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 60 toBending length: 2150 mmAxes: X and Y axisrapid speed Y-axis: 150 mm/sStroke: 160 mmInside distance between side frames: 1100 mmGap in side frame: 320 mmDaylight: 390 mmPower concept: hydraulicWorking speed Y-axis: 10Back gauge travel X-axis: 500 mmMotor power: 5.5 kWLength: 1700 mmWidth: 1600 mmHeight: 2230 mmWeight: 5450 kg
Bending force: 60 to
Bending length: 2150 mm
Axes: X and Y axis
rapid speed Y-axis: 150 mm/s
Stroke: 160 mm
Inside distance between side frames: 1100 mm
Gap in side frame: 320 mm
Daylight: 390 mm
Power concept: hydraulic
Working speed Y-axis: 10
Back gauge travel X-axis: 500 mm
Motor power: 5.5 kW
Length: 1700 mm
Width: 1600 mm
Height: 2230 mm
Weight: 5450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 2150 mm
Axes: X and Y axis
rapid speed Y-axis: 150 mm/s
Stroke: 160 mm
Inside distance between side frames: 1100 mm
Gap in side frame: 320 mm
Daylight: 390 mm
Power concept: hydraulic
Working speed Y-axis: 10
Back gauge travel X-axis: 500 mm
Motor power: 5.5 kW
Length: 1700 mm
Width: 1600 mm
Height: 2230 mm
Weight: 5450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Force de flexion : 40 à
Longueur de pliage : 1500 mm
Axes : axes X et Y
vitesse rapide axe Y : 150 mm/s
Course : 160 mm
Distance intérieure entre les cadres latéraux : 1100 mm
Espace dans le cadre latéral : 320 mm
Lumière du jour : 390 mm
Concept de puissance : hydraulique
Vitesse de travail axe Y : 10
Axe X de la course de la butée arrière : 500 mm
Puissance moteur : 4 kW
Longueur : 1700 mm
Largeur : 1600 mm
Hauteur : 2230 mm
Poids : 3450kg
Force de flexion : 40 à
Longueur de pliage : 1500 mm
Axes : axes X et Y
vitesse rapide axe Y : 150 mm/s
Course : 160 mm
Distance intérieure entre les cadres latéraux : 1100 mm
Espace dans le cadre latéral : 320 mm
Lumière du jour : 390 mm
Concept de puissance : hydraulique
Vitesse de travail axe Y : 10
Axe X de la course de la butée arrière : 500 mm
Puissance moteur : 4 kW
Longueur : 1700 mm
Largeur : 1600 mm
Hauteur : 2230 mm
Poids : 3450kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Longueur de pliage : 1500 mm
Axes : axes X et Y
vitesse rapide axe Y : 150 mm/s
Course : 160 mm
Distance intérieure entre les cadres latéraux : 1100 mm
Espace dans le cadre latéral : 320 mm
Lumière du jour : 390 mm
Concept de puissance : hydraulique
Vitesse de travail axe Y : 10
Axe X de la course de la butée arrière : 500 mm
Puissance moteur : 4 kW
Longueur : 1700 mm
Largeur : 1600 mm
Hauteur : 2230 mm
Poids : 3450kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 30 toBending length: 1250 mmAxes: X and Y axisrapid speed Y-axis: 210 mm/sStroke: 150 mmInside distance between side frames: 1010 mmGap in side frame: 255 mmDaylight: 265 mmPower concept: hydraulicWorking speed Y-axis: 10Motor power: 3 kWLength: 1760 mmWidth: 1375 mmHeight: 2135 mmWeight: 1700 kg
Bending force: 30 to
Bending length: 1250 mm
Axes: X and Y axis
rapid speed Y-axis: 210 mm/s
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 1250 mm
Axes: X and Y axis
rapid speed Y-axis: 210 mm/s
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 120 toBending length: 3050 mmAxes: Y1 / Y2 and X-axisrapid speed Y-axis: 120 mm/sStroke: 180 mmInside distance between side frames: 2550 mmGap in side frame: 250 mmDaylight: 375 mmPower concept: hydraulicWorking speed Y-axis: 9Retractionspeed Y-axis: 77Back gauge travel X-axis: 620 mmBack gauge speed X-axis: 250Table height: 878 mmTable width: 104 mmOiltank: 150 lMotor power: 11 kWLength: 3750 mmWidth: 1230 mmHeight: 2400 mmWeight: 5900 kg
Bending force: 120 to
Bending length: 3050 mm
Axes: Y1 / Y2 and X-axis
rapid speed Y-axis: 120 mm/s
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 3050 mm
Axes: Y1 / Y2 and X-axis
rapid speed Y-axis: 120 mm/s
Stroke: 180 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 375 mm
Power concept: hydraulic
Working speed Y-axis: 9
Retractionspeed Y-axis: 77
Back gauge travel X-axis: 620 mm
Back gauge speed X-axis: 250
Table height: 878 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 11 kW
Length: 3750 mm
Width: 1230 mm
Height: 2400 mm
Weight: 5900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 220 toBending length: 4050 mmAxes: Y1 / Y2 / X and R axisrapid speed Y-axis: 200 mm/sStroke: 265 mmInside distance between side frames: 3600 mmGap in side frame: 410 mmDaylight: 530 mmPower concept: hydraulicWorking speed Y-axis: 12Retractionspeed Y-axis: 180Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmMotor: 2 x 11 kWLength: 5250 mmWidth: 1770 mmHeight: 2900 mmWeight: 15000 kg
Bending force: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
rapid speed Y-axis: 200 mm/s
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 11 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
rapid speed Y-axis: 200 mm/s
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 11 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 135 toBending length: 3050 mmAxes: Y1 / Y2 / X axisrapid speed Y-axis: 160 mm/sStroke: 265 mmInside distance between side frames: 2600 mmGap in side frame: 450 mmDaylight: 530 mmPower concept: hydraulicWorking speed Y-axis: 10Retractionspeed Y-axis: 120Back gauge travel X-axis: 500 mmBack gauge speed X-axis: 500Back gauge speed R-axis: 350 mm/sBack gauge travel R-axis: 250 mmTable height: 900 mmOiltank: 150 lMotor power: 15 kWLength: 4250 mmWidth: 1700 mmHeight: 2850 mmWeight: 9580 kg
Bending force: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
rapid speed Y-axis: 160 mm/s
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
rapid speed Y-axis: 160 mm/s
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses
Bending length: 350 - 2250 mmMax. sheet length: 2600 mmMax. sheet width: 1524 mmMin. bendable width: 150 mmMax. bending height: 254 mmMax. bending depth: 50 mmMax. sheet rotation area: 3300 mmBending force: 32 toPressure force: 52 toSheet thickness (420 N/mm²): 2.5 mmSheet thickness (600 N/mm²): 1.8 mmSheet thickness (260 N/mm²): 3.5 mmMin. sheet thickness - mild steel: 0.5 mmMax. bending angle: 135 °
Bending length: 350 - 2250 mm
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. sheet length: 2600 mm
Max. sheet width: 1524 mm
Min. bendable width: 150 mm
Max. bending height: 254 mm
Max. bending depth: 50 mm
Max. sheet rotation area: 3300 mm
Bending force: 32 to
Pressure force: 52 to
Sheet thickness (420 N/mm²): 2.5 mm
Sheet thickness (600 N/mm²): 1.8 mm
Sheet thickness (260 N/mm²): 3.5 mm
Min. sheet thickness - mild steel: 0.5 mm
Max. bending angle: 135 °
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18140Producer: BATTENFELDYear of construction: 2006Clamping unitClamping force: 25 tonOpening stroke: 450 mmDistance between tie bars: 270 X 270 mmMould height min.: 150 mmInjection unitScrew diameter: 14 mmInjection volume: 15 cm³Shot weight: 7 gInjection pressure: 2650 barMeasurements and weightDimensions: 2,25 X 0,90 X 1,30 mMachine weight: 1100 kg
Ref. no.: 18140
Producer: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 17514Producer: BILLIONYear of construction: 2011Clamping unitClamping force: 50 tonOpening stroke: 250 mmDistance between tie bars: 350 x 300 mmMould height min.: 150 mmMould height max.: 400 mmPlaten size (h x v): 490 x 440 mmInjection unitScrew diameter: 25 mmInjection volume: 39 cm³Shot weight: 35 gInjection pressure: 2040 barMeasurements and weightDimensions: 3,7 x 1,4 x 1,8 mMachine weight: 3200 kgAdditional information & extrasHot runner systems: 6 pcs.
Ref. no.: 17514
Producer: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Réf. n° : 16369
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
Réf. n° : 16369
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsSciage
Cutting speed: 6 - 30 m/minSaw blade dimensions: 400 (425) x 50 x 5 mmSectional area 45° flat: 180 x 40 mmSectional area 90° flat: 240 x 70 mmSectional area 90° circular: 140 mmSquare-section area 90°: 130 mmMitre cut: continuously 60 -/+ degreeSaw blade feed: 0 - 1.200 mm/minMinimum quantity lubrication system: KKS 401 115326Autom. Flat magazine FMA for bars: 1500 - 7000 mmControl: Kaltenbach MULTI-COMChip conveyor: yesTotal power: 5,5 kWWeight of machine: 4500 kgSpace requirement (W x D x H): 9,45 x 2,59 x 2,1 mHours of operation: 17290 hCondition: very goodfully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocationAccessory: 2 saw blades
Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines d'emballageMachines d'emballage
Suction tube: diameter 150 mm2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines d'emballageMachines d'emballage
Total power: 1,4 kWWeight of machine: 210 kgSpace requirement (W x D x H): 1,2 x 1,2 x 2,05 mfor cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 barAccessory: without extraction function
Total power: 1,4 kW
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines et équipements de coupeMachines de découpe laser
X: 1300 mmY: 1300 mmMax. workpiece dimension: 1500 x 1500 x 135 mmRepeatability: 0,025Wavelength: 10,6 micrometerWorking hour: Laser 6135, Gravierer 18.743 hSpace requirement (W x D x H): 2,4 x 2,0 x 1,4 mTotal power: 2,3 kWWeight of machine: 1200 kgCondition: gutType: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Machines à boisMachines de fabrication de fenêtresLignes de production complètes
Power: 1130 / 904Motor type: MTU V18 Bi Turbo DieselSpeed: 1500 rpmVoltage: 50 Hz - 230 / 400 VTank capacity: 800 ltrWorking hour: 116 hCondition: very goodDocumentation, heat exchanger, batteries, soundproof hood
Power: 1130 / 904
Motor type: MTU V18 Bi Turbo Diesel
Speed: 1500 rpm
Voltage: 50 Hz - 230 / 400 V
Tank capacity: 800 ltr
Working hour: 116 h
Condition: very good
Documentation, heat exchanger, batteries, soundproof hood
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Motor type: MTU V18 Bi Turbo Diesel
Speed: 1500 rpm
Voltage: 50 Hz - 230 / 400 V
Tank capacity: 800 ltr
Working hour: 116 h
Condition: very good
Documentation, heat exchanger, batteries, soundproof hood
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseuses
X: 4050 mmY: 2050 mmZ: 250 mmMounting table: 4200 x 2150 mmSpeed range: 12 kW - 36.000 rpmTaper fixture: HSK E40Control: MDSI 6.0 on XP computerTool changer: 10 -stationTool diameter: 13 mmHours of operation: 23589 hSpindle on: 7736 hTotal power: 15 kWWeight of machine: 4900 kgSpace requirement (W x D x H): 6,7 x 3,12 x 2,6 mCondition: goodtool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service techniciansAccessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseusesAutres
X: 1050 mmY: 600 mmZ: 600 mmTable size: 1150 x 600 mmSpeed range: 8.000 rpmTaper fixture: BT 40Internal coolant: 20 barTool changer: 24 -stationControl: Fanuc 0i-MDHours of operation: 31575 hProgram run: 8510 hTotal power: 40 kWWeight of machine: 7.200 kgSpace requirement (W x D x H): 4,0 x 2,2 x 2,7 mCondition: very goodfiltration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured visesAccessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Machines à boisSciageScies à courroies
Cutting diameter: 400 mmSection thickness: 500 mmSectional area 90° circular: 400 mmSectional area 90° flat: 500 X 400 mmCutting speed: stepless from 15 to 150 m/minWorking height: 750 mmSaw blade dimensions: 6220 X 41 X 1,3 mmRemaining piece length: automat 110 mmSmallest diameter: 5 mmChip conveyor: yesFeed length: 0 - 600 mmLowering speed: 0 - 750 mm/sec.Material weight: 500 kgWorking hour: 4500 hTotal power: 8,0 kWWeight of machine: 1950 kgSpace requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m mCutting area rectangle: 500 x 410 mmneat machine, without roller conveyorsAccessory: 2 new saw blades, documentation
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 new saw blades, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 new saw blades, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines à boisFraiseusesAutres
Tischgröße: . mmMotorleistung: 9 kWSpindeldurchmesser: . mmDrehzahl(en): U/minGewicht: kgBaujahr: 0
Tischgröße: . mm
Motorleistung: 9 kW
Spindeldurchmesser: . mm
Drehzahl(en): U/min
Gewicht: kg
Baujahr: 0
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Motorleistung: 9 kW
Spindeldurchmesser: . mm
Drehzahl(en): U/min
Gewicht: kg
Baujahr: 0
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Machines de traitement du plastiquePresses
Druck: 650 tDurchgangsbreite: 920 mmHub: 1500 mmTischfläche: 2000x1500 mmStößelfläche: 2000x1500 mmEinbauhöhe: 2100 mmHydraulik: 250 barSchließgeschwindigkeit: 500 mm/secPreßgeschwindigkeit: 0,5-10,4 mm/secLoch im Stößel Durchmesser/Tiefe: mmÖffnungsgeschwindigkeit: 250 mm/250Gesamtleistungsbedarf: kWMaschinengewicht ca.: 47 tRaumbedarf ca.: m
Druck: 650 t
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Machines alimentairesMachines pharmaceutiques et cosmétiques
Behälter - Durchmesser max.: 2800 mmHöhe: 1500 mmInhalt: 7825 l
Behälter - Durchmesser max.: 2800 mm
Höhe: 1500 mm
Inhalt: 7825 l
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Höhe: 1500 mm
Inhalt: 7825 l
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Temperatur max.: . °Länge: 15000 mmBreite: 6000 mmHöhe: 5500 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Temperatur max.: . °
Länge: 15000 mm
Breite: 6000 mm
Höhe: 5500 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Länge: 15000 mm
Breite: 6000 mm
Höhe: 5500 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à tailler les engrenagesMachines à rectifier les engrenages
Raddurchmesser - max.: 1500 mmRadbreite: 550 mmModul - max.: 25Modul - min.: 2Werkstückgewicht max.: 6000 kgZähnezahl - max.: 432Zähnezahl - min.: 12Tischdurchmesser: 990 mmSchleifscheibe Abmessung: 400 mmGesamtleistungsbedarf: 75 kWMaschinengewicht ca.: 20,5 tRaumbedarf ca.: m
Raddurchmesser - max.: 1500 mm
Radbreite: 550 mm
Modul - max.: 25
Modul - min.: 2
Werkstückgewicht max.: 6000 kg
Zähnezahl - max.: 432
Zähnezahl - min.: 12
Tischdurchmesser: 990 mm
Schleifscheibe Abmessung: 400 mm
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 20,5 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Radbreite: 550 mm
Modul - max.: 25
Modul - min.: 2
Werkstückgewicht max.: 6000 kg
Zähnezahl - max.: 432
Zähnezahl - min.: 12
Tischdurchmesser: 990 mm
Schleifscheibe Abmessung: 400 mm
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 20,5 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à tailler les engrenagesMachines à tester les roues d'engrenages
Raddurchmesser - max.: 600 mmRadbreite: 150 mmModul - max.: 15Modul - min.: 1Einspannlänge min.: 45 mmEinspannlänge max.: 750 mmWerkstückgewicht: 150 kgGesamtleistungsbedarf: kWMaschinengewicht ca.: 0,55 tRaumbedarf ca.: 1,2x0,8x1,95 m
Raddurchmesser - max.: 600 mm
Radbreite: 150 mm
Modul - max.: 15
Modul - min.: 1
Einspannlänge min.: 45 mm
Einspannlänge max.: 750 mm
Werkstückgewicht: 150 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 0,55 t
Raumbedarf ca.: 1,2x0,8x1,95 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Radbreite: 150 mm
Modul - max.: 15
Modul - min.: 1
Einspannlänge min.: 45 mm
Einspannlänge max.: 750 mm
Werkstückgewicht: 150 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 0,55 t
Raumbedarf ca.: 1,2x0,8x1,95 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsAccessoires et pièces détachéesTechnologie de mesure
Länge: 2500 mmBreite: 1500 mmDicke: 300 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Länge: 2500 mm
Breite: 1500 mm
Dicke: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Breite: 1500 mm
Dicke: 300 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.