Veuillez patienter...

1
pressing capacity: 200 toStroke: 500 mmSpace between columns: 1250x1000 mmDaylight: 600 mmRapid speed: 25 mm/sWorking speed: 3 mm/sMotor: 7.5 kWLength: 1550 mmWidth: 1300 mmHeight: 2700 mm
pressing capacity: 200 to
Stroke: 500 mm
Space between columns: 1250x1000 mm
Daylight: 600 mm
Rapid speed: 25 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 1550 mm
Width: 1300 mm
Height: 2700 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Saw frame: Pivot frameBand dimensions: 3160x27x0,9 mmBand speed continous: 20-100 m/minCutting capacity 0° round: 270 mmCutting capacity 0° square: 270 mmCutting capacity 0° flat: 340 x 220 mmCutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mmCutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mmCutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mmWorking height: 910 mmCoolant pump motor: 0.12 kWHydraulic motor: 0.37 kWMotor: 1.5 kWLength: 1730 mmWidth: 770 mmHeight: 1460 mmWeight: 476 kg
Saw frame: Pivot frame
Band dimensions: 3160x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 270 mm
Cutting capacity 0° square: 270 mm
Cutting capacity 0° flat: 340 x 220 mm
Cutting capacity 45°: round 230 mm, square 200 mm, flat 220 x 200 mm
Cutting capacity 60°: round 150 mm, square 150 mm, flat 150 x 100 mm
Cutting capacity - 45°: round 180 mm, square 160 mm, flat 210 x 100 mm
Working height: 910 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 1.5 kW
Length: 1730 mm
Width: 770 mm
Height: 1460 mm
Weight: 476 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsPonceusesRectifieuses vibrantes

KROMAS 200 ED - SR Gleitschleifanlage-Volumen 200 Liter-Steuerung / Ein - Aus -Timer - Drehzahl-Max. Beladung 800 Liter-Drehzahl 900-1500 U/min-Schmutzwasserentleerung-Beschichtung in OrdnungAbmaße:LxBxH 1,2x1,1x1,5 Meter / Gewicht 500 KgBn7Y22Vf
KROMAS 200 ED - SR Gleitschleifanlage

-Volumen 200 Liter
-Steuerung / Ein - Aus -Timer - Drehzahl
-Max. Beladung 800 Liter
-Drehzahl 900-1500 U/min
-Schmutzwasserentleerung
-Beschichtung in Ordnung

Abmaße:
LxBxH 1,2x1,1x1,5 Meter / Gewicht 500 Kg


Bn7Y22Vf

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Swing over bed: 800 mmDistance between centers: 2000 mmCentre height: 400 mmSpindle bore: 315 mmswing over cross slide: 560 mmWidth of bed: 560 mmSpindle taper: 318 MRevs continuous variable in gear steps: 8 - 400Number of feeds: 152Longitudinal feed range: 0.039 - 15 mm/rCross feed range: 0.02 - 7.5 mm/rNumber of threads: 76Metric thread range: 0.5 - 150 mmInch thread range: 60 - 1/5 TpiModule thread range: 0.125 - 37.5DP thread range: 240 - 4/5Cross slide travel: 410 mmTop slide travel: 150 mmTailstock quill diameter: 105 mmTailstock quill taper: 6 MKTailstock travel: 225 mmMotor power: 11 kWWeight: 6100 kg
Swing over bed: 800 mm
Distance between centers: 2000 mm
Centre height: 400 mm
Spindle bore: 315 mm
swing over cross slide: 560 mm
Width of bed: 560 mm
Spindle taper: 318 M
Revs continuous variable in gear steps: 8 - 400
Number of feeds: 152
Longitudinal feed range: 0.039 - 15 mm/r
Cross feed range: 0.02 - 7.5 mm/r
Number of threads: 76
Metric thread range: 0.5 - 150 mm
Inch thread range: 60 - 1/5 Tpi
Module thread range: 0.125 - 37.5
DP thread range: 240 - 4/5
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 11 kW
Weight: 6100 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsToursTours à centrer et tours à broche

WEILER COMMODOR L&Z Spindeldrehmaschine-Drehlänge 1000mm-Drehdurchmesser max. 160mmStangendurchlass 56mm-Drehzahlbereich 25-2000 U/min-Automatische Längs / Planvorschübe-Gewinde Metrisch / Zoll /usw.-Reitstock Mk4-Dreibackenfutter ca. 250mm-Multifixgrundhalter mit Einsatz-Kühlmitteleinrichtung-Elektrischer Futterschutz-Spänerückwand-Maschinendokumentation-Guter betriebsbereiter ZustandAbmaße:GpdpzgLxBxH 2,5x1,3x1,7 Meter / Gewicht 1500Kg
WEILER COMMODOR L&Z Spindeldrehmaschine


-Drehlänge 1000mm
-Drehdurchmesser max. 160mm
Stangendurchlass 56mm
-Drehzahlbereich 25-2000 U/min
-Automatische Längs / Planvorschübe
-Gewinde Metrisch / Zoll /usw.
-Reitstock Mk4
-Dreibackenfutter ca. 250mm
-Multifixgrundhalter mit Einsatz
-Kühlmitteleinrichtung
-Elektrischer Futterschutz
-Spänerückwand
-Maschinendokumentation
-Guter betriebsbereiter Zustand

Abmaße:
Gpdpzg
LxBxH 2,5x1,3x1,7 Meter / Gewicht 1500Kg

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Werkzeugfräsmaschine - DECKEL FP 3L / 3-Achs Heidenhain Digitalanzeige-Verfahrwege X/Y/Z 800x300x400mm (y-Achse um 200mm verschiebbar)-Drehzahlbereich 40 - 2000 U/min-Vorschub und Eilgänge in allen drei Achsen-Vorschub 10-500 mm/min-Eilgänge1500 mm/min-Horizontal / Vertikalfräseinrichtung SK40 - Ausfahrbar-Starrer Winkeltisch (Aufspannfläche 1000x400mm)-Antriebsleistung 2,2 KW-Drei Achs Heidenhain DigitalanzeigeLrjbr Tov Sdfvo I Ewyei-Spänewanne-Guter Allgemeinzustand-DokumentationAbmaße:LxBxH 1,8x1,7x1,7 Meter / Gewicht 1900Kg
Werkzeugfräsmaschine - DECKEL FP 3L / 3-Achs Heidenhain Digitalanzeige

-Verfahrwege X/Y/Z 800x300x400mm (y-Achse um 200mm verschiebbar)
-Drehzahlbereich 40 - 2000 U/min
-Vorschub und Eilgänge in allen drei Achsen
-Vorschub 10-500 mm/min
-Eilgänge1500 mm/min
-Horizontal / Vertikalfräseinrichtung SK40 - Ausfahrbar
-Starrer Winkeltisch (Aufspannfläche 1000x400mm)
-Antriebsleistung 2,2 KW
-Drei Achs Heidenhain Digitalanzeige
Lrjbr Tov Sdfvo I Ewyei
-Spänewanne
-Guter Allgemeinzustand
-Dokumentation


Abmaße:
LxBxH 1,8x1,7x1,7 Meter / Gewicht 1900Kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsCentres d'usinageCentres d'usinage horizontaux
x-Weg: . mmy-Weg: . mmz-Weg: . mmSteuerung: SiemensTyp: 840 DPalettengröße: mmDrehtisch: °Drehzahl: U/minTischbelastung: kgSpindelaufnahme ISO: 50Werkzeugwechsler: Pos.Vorschub: mm/minKühlung durch die Spindel: barGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: . mm
y-Weg: . mm
z-Weg: . mm
Steuerung: Siemens
Typ: 840 D
Palettengröße: mm
Drehtisch: °
Drehzahl: U/min
Tischbelastung: kg
Spindelaufnahme ISO: 50
Werkzeugwechsler: Pos.
Vorschub: mm/min
Kühlung durch die Spindel: bar
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsPonceusesRectifieuses cylindriques
Schleifdurchmesser: . mmSchleiflänge: 2500 mmWerkstückgewicht: . kgSchleifscheibendurchmesser: mmSpannung: VGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Schleifdurchmesser: . mm
Schleiflänge: 2500 mm
Werkstückgewicht: . kg
Schleifscheibendurchmesser: mm
Spannung: V
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à souderAutres
Länge: . mmHöhe: . mmVolt: U1 400 - 50 HZ VAmpere: 32
Länge: . mm
Höhe: . mm
Volt: U1 400 - 50 HZ V
Ampere: 32


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph
Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 2050 mmSheet thickness (420 N/mm²): 3 mmMax. thickness - stainless steel: 2 mmMax. thickness - aluminium: 4 mmAntrieb: MotorizedBack gauge: 1000 mmLength: 3350 mmWidth: 2200 mmHeight: 1900 mmWeight: 3800 kg
Bending length: 2050 mm
Sheet thickness (420 N/mm²): 3 mm
Max. thickness - stainless steel: 2 mm
Max. thickness - aluminium: 4 mm
Antrieb: Motorized
Back gauge: 1000 mm
Length: 3350 mm
Width: 2200 mm
Height: 1900 mm
Weight: 3800 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 2550 mmSheet thickness (420 N/mm²): 2.5 mmMax. thickness - stainless steel: 1.5 mmMax. thickness - aluminium: 3.5 mmAntrieb: MotorizedBack gauge: 1000 mmLength: 3830 mmWidth: 2200 mmHeight: 1900 mmWeight: 4050 kg
Bending length: 2550 mm
Sheet thickness (420 N/mm²): 2.5 mm
Max. thickness - stainless steel: 1.5 mm
Max. thickness - aluminium: 3.5 mm
Antrieb: Motorized
Back gauge: 1000 mm
Length: 3830 mm
Width: 2200 mm
Height: 1900 mm
Weight: 4050 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 3200 mmSheet thickness (420 N/mm²): 2 mmMax. thickness - stainless steel: 1.2 mmMax. thickness - aluminium: 3 mmAntrieb: MotorizedBack gauge: 1000 mmLength: 4450 mmWidth: 2200 mmHeight: 1900 mmWeight: 4500 kg
Bending length: 3200 mm
Sheet thickness (420 N/mm²): 2 mm
Max. thickness - stainless steel: 1.2 mm
Max. thickness - aluminium: 3 mm
Antrieb: Motorized
Back gauge: 1000 mm
Length: 4450 mm
Width: 2200 mm
Height: 1900 mm
Weight: 4500 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Biegelänge: 4200 mmBlechstärke (420 N/mm²): 1.5 mmMax. Blechstärke - Edelstahl: 1 mmMax. Blechstärke - Aluminium: 2 mmAntrieb: MotorischHinteranschlag: 1000 mmLänge: 5450 mmBreite: 2200 mmHöhe: 1900 mmGewicht: 5350 kg
Biegelänge: 4200 mm
Blechstärke (420 N/mm²): 1.5 mm
Max. Blechstärke - Edelstahl: 1 mm
Max. Blechstärke - Aluminium: 2 mm
Antrieb: Motorisch
Hinteranschlag: 1000 mm
Länge: 5450 mm
Breite: 2200 mm
Höhe: 1900 mm
Gewicht: 5350 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueÉquipements périphériques
Ref. no.: 18439Hersteller: MOTANYear of construction: 1995Further information:These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.
Ref. no.: 18439
Hersteller: MOTAN
Year of construction: 1995

Further information:
These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.

Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injection
Ref. no.: 17540Hersteller: ARBURGYear of construction: 1994Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 270 X 270 mmMould height min.: 200 mmPlaten size (h x v): 405 X405 mmInjection unitScrew diameter: 25 mmInjection volume: 67 cm³Shot weight: 61 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,3 X 1,5 X 2,0 mMachine weight: 2400 kg
Ref. no.: 17540
Hersteller: ARBURG
Year of construction: 1994

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsFraiseusesFraiseuses à montant mobile
x-Weg: 6500 mmy-Weg: 1400 mmz-Weg: 1000 mmDrehzahl: 20-4000 U/minSpindelaufnahme ISO: SK50Tischabmessung: 8000x1100 mmSteuerung: Siemens 840 DEilgang: 20000 mm/minFräskopf - schwenkbar + / -: 360 +/- °T-Nuten - Breite: 22 mmTischbelastung: 2500 kg/m²Spindelleistung: 28 KwVorschub: 10.000 mm/minAnschlußleistung: 76 kVAMaschinengewicht ca.: 28,5 t
x-Weg: 6500 mm
y-Weg: 1400 mm
z-Weg: 1000 mm
Drehzahl: 20-4000 U/min
Spindelaufnahme ISO: SK50
Tischabmessung: 8000x1100 mm
Steuerung: Siemens 840 D
Eilgang: 20000 mm/min
Fräskopf - schwenkbar + / -: 360 +/- °
T-Nuten - Breite: 22 mm
Tischbelastung: 2500 kg/m²
Spindelleistung: 28 Kw
Vorschub: 10.000 mm/min
Anschlußleistung: 76 kVA
Maschinengewicht ca.: 28,5 t


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Travail des métaux et machines-outilsToursTours
Planscheibendurchmesser: 2500 mmUmlaufdurchmesser: 2800 mmDrehhöhe: 2200 mmTischbelastung: 15 tDrehzahl: U/minVorschub: mm/USupport: 2Gesamtleistungsbedarf: 55 kWMaschinengewicht ca.: 56 tRaumbedarf ca.: m
Planscheibendurchmesser: 2500 mm
Umlaufdurchmesser: 2800 mm
Drehhöhe: 2200 mm
Tischbelastung: 15 t
Drehzahl: U/min
Vorschub: mm/U
Support: 2
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: 56 t
Raumbedarf ca.: m


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Loma IQ Twin head metal detector, Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject
Loma IQ Twin head metal detector, Stainless metal detector, twin head, ferrous in foil, belt dimensions 2000mm x 280mm, aperture 340mm x 120mm, push arm reject

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Protech lidding conveyor, Stainless conveyor with mounted roller for closing lids, side guides, belt dimensions 3100mm x 200mm, variable speed, 1Ph
Protech lidding conveyor, Stainless conveyor with mounted roller for closing lids, side guides, belt dimensions 3100mm x 200mm, variable speed, 1Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1050 mmMax. bending capacity - mild steel: 3Upper roll diameter: 90 mmBending speed: 6 m/minMotor power: 1.1 kWLength: 1630 mmWidth: 700 mmHeight: 1200 mmWeight: 480 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines alimentairesAccessoires et pièces détachées

Anritsu SV Checkweigher, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph
Anritsu SV Checkweigher, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Machines alimentairesÉquipements de boulangerie et de pâtisserieMélangeurs

Doyon AEF035 Spiral mixer, Serial: 795, 2008, Spiral mixer, 70Kgs, adjustable speed, with timer, 3.2Kw, 3Ph
Doyon AEF035 Spiral mixer, Serial: 795, 2008, Spiral mixer, 70Kgs, adjustable speed, with timer, 3.2Kw, 3Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines alimentairesAccessoires et pièces détachées

Hovmand Inox 200M3 Lifter, 2015, stainless lifter, previously used for lifting and tipping a bowl, control pad, mobile, 1Ph
Hovmand Inox 200M3 Lifter, 2015, stainless lifter, previously used for lifting and tipping a bowl, control pad, mobile, 1Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Stainless conveyor, Stainless conveyor, belt dimensions 2500mm x 280mm, elevates from 300mm to 1200mm, mobile
Stainless conveyor, Stainless conveyor, belt dimensions 2500mm x 280mm, elevates from 300mm to 1200mm, mobile

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injection
Ref. no.: 17147Hersteller: ENGELYear of construction: 2008Clamping unitClamping force: 400 tonOpening stroke: 1008 mmPlaten size (h x v): 1360 x 1460 mmInjection unitScrew diameter: 60 + 25 + 25+ 25+ 25 mmInjection volume: 608 + 54 + 54 + 54 + 54 cm³Shot weight: 547 + 48 + 48 + 48 + 48 gInjection pressure: 1725 + 1200 + 1200 + 1200 + 1200 barMeasurements and weightMachine weight: 22.000 + 6.600 kgDimensions LxWxH part 1: 5 x 2,3 x mDimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008

Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm

Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar

Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsToursTours
Drehdurchmesser: 1020 mmDrehlänge: 4000 mmDrehdurchmesser über Support: 720 mmSteuerung: SiemensTyp: 805Reitstock-Pinolenaufnahme MK: 6Getriebestufen: 2Drehzahl: U/minBettbreite: 560 mmSpindelbohrung: 200 mmWerkstückgewicht: kgPlanscheibe: 1000 mmFabrikat: Forkhardt PSA 1000Dreibackenfutter Forckrath: 500 mmLünette: 500 mmGesamtleistungsbedarf: KVAMaschinengewicht ca.: tRaumbedarf ca.: 7,4x2,5x2,5 m
Drehdurchmesser: 1020 mm
Drehlänge: 4000 mm
Drehdurchmesser über Support: 720 mm
Steuerung: Siemens
Typ: 805
Reitstock-Pinolenaufnahme MK: 6
Getriebestufen: 2
Drehzahl: U/min
Bettbreite: 560 mm
Spindelbohrung: 200 mm
Werkstückgewicht: kg
Planscheibe: 1000 mm
Fabrikat: Forkhardt PSA 1000
Dreibackenfutter Forckrath: 500 mm
Lünette: 500 mm
Gesamtleistungsbedarf: KVA
Maschinengewicht ca.: t
Raumbedarf ca.: 7,4x2,5x2,5 m


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Aucune photo disponible
Travail des métaux et machines-outilsAccessoires et pièces détachéesAngles de serrage

Länge: 2000 mmBreite: 1600 mmTiefe: 1000 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Länge: 2000 mm
Breite: 1600 mm
Tiefe: 1000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsAccessoires et pièces détachéesPlateaux mobiles

Plattenlänge: 6000 mmPlattenbreite: 2000 mmPlattenhöhe: 320 mmT-Nuten - Breite: mmT - Nutenabstand: mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 8 tRaumbedarf ca.: m
Plattenlänge: 6000 mm
Plattenbreite: 2000 mm
Plattenhöhe: 320 mm
T-Nuten - Breite: mm
T - Nutenabstand: mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8 t
Raumbedarf ca.: m


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
pressing capacity: 30 toStroke: 200 mmRam: 500x380 mmTable: 700x450 mmDaylight: 400 mmRapid speed: 54 mm/sWorking speed: 18 mm/sRetraction speed: 90 mm/sMotor: 7.5 kWLength: 1680 mmWidth: 850 mmHeight: 250 mmWeight: 2950 kg
pressing capacity: 30 to
Stroke: 200 mm
Ram: 500x380 mm
Table: 700x450 mm
Daylight: 400 mm
Rapid speed: 54 mm/s
Working speed: 18 mm/s
Retraction speed: 90 mm/s
Motor: 7.5 kW
Length: 1680 mm
Width: 850 mm
Height: 250 mm
Weight: 2950 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôle
pressing capacity: 170 toStroke: 500 mmTable: 1200x700 mmDaylight: 600 mmRapid speed: 110 mm/sWorking speed: 7 mm/sRetraction speed: 70 mm/sMotor: 19 kWLength: 2700 mmWidth: 1600 mmHeight: 2650 mm
pressing capacity: 170 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 110 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 19 kW
Length: 2700 mm
Width: 1600 mm
Height: 2650 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôle
pressing capacity: 125 toStroke: 500 mmTable: 1200x700 mmDaylight: 600 mmRapid speed: 115 mm/sWorking speed: 7 mm/sRetraction speed: 70 mm/sMotor: 15 kWLength: 2550 mmWidth: 1500 mmHeight: 2600 mm
pressing capacity: 125 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
pressing capacity: 200 toStroke: 500 mmTable: 1000x600 mmDaylight: 640 mmRapid speed: 21 mm/sWorking speed: 2 mm/sMotor: 5.5 kWLength: 1800 mmWidth: 1300 mmHeight: 2500 mmWeight: 6400 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
pressing capacity: 150 toStroke: 500 mmTable: 800x600 mmDaylight: 630 mmRapid speed: 22 mm/sWorking speed: 3 mm/sMotor: 4 kWLength: 1800 mmWidth: 1200 mmHeight: 2400 mmWeight: 4500 kg
pressing capacity: 150 to
Stroke: 500 mm
Table: 800x600 mm
Daylight: 630 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 1800 mm
Width: 1200 mm
Height: 2400 mm
Weight: 4500 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
pressing capacity: 40 toStroke: 500 mmTable: 700x500 mmDaylight: 600 mmRapid speed: 26 mm/sWorking speed: 9 mm/sMotor: 4 kWLength: 1400 mmWidth: 900 mmHeight: 2200 mmWeight: 1300 kg
pressing capacity: 40 to
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
pressing capacity: 300 toStroke: 500 mmRam: 1000x500 mmTable: 1200x800 mmDaylight: 600 mmThroat depth: 400 mmRapid speed: 22 mm/sWorking speed: 2 mm/sMotor: 7.5 kWLength: 2300 mmWidth: 1500 mmHeight: 3100 mmWeight: 11200 kg
pressing capacity: 300 to
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
pressing capacity: 200 toStroke: 500 mmRam: 870x500 mmTable: 1000x600 mmDaylight: 500 mmThroat depth: 300 mmRapid speed: 21 mm/sWorking speed: 3 mm/sMotor: 7.5 kWLength: 2300 mmWidth: 1500 mmHeight: 3000 mmWeight: 8200 kg
pressing capacity: 200 to
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
pressing capacity: 150 toStroke: 500 mmRam: 800x400 mmTable: 900x600 mmDaylight: 500 mmThroat depth: 300 mmRapid speed: 20 mm/sWorking speed: 3 mm/sMotor: 4 kWLength: 2200 mmWidth: 1500 mmHeight: 3000 mmWeight: 5500 kg
pressing capacity: 150 to
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsToursTours CNC
Swing diameter over cross slide: 480 mmSwing diameter over bed slide: 670 mmTurning length: 2000 mmSpeed range: 2800 rpmSpindle bore: 107 mmTurret: 12 -stationSpeed of driven tools: 2500 rpmDriven tools: yesCoolant system: jaChip conveyor: yesControl: Heidenhain CNC Pilot 3190Chucks: Roehm Ø 400 m jawsMachine on: 77517 hSpindle on: 28962 hTotal power: 38 kWWeight of machine: 10.000 kgSpace requirement (W x D x H): 7,6 x 5,4 x 1,9 mCondition: very goodMain drive motor overhauled 4 years ago, spindle new ball bearings, partially overhauled, machine is still being overhauled and will be ready in mid-November 2021Accessory: towable steady rest, towable tailstock, 4 pcs. driven tools (axial and radial)
Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good

Main drive motor overhauled 4 years ago, spindle new ball bearings, partially overhauled, machine is still being overhauled and will be ready in mid-November 2021

Accessory: towable steady rest, towable tailstock, 4 pcs. driven tools (axial and radial)

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
pressing capacity: 200 toStroke: 500 mmTable: 2.000 x 1.550 mmDaylight: 800 mmRapid speed: 20 mm/sWorking speed: 2 mm/sCylinder fix or moveable: horizontal moveableDistance between columns: 1550 mmHorizontal movable cylinder: 1000 mmHydraulicaly movable stand: 1300 mmLength: 2400 mmWidth: 2000 mmHeight: 2600 mmWeight: 4800 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à grignoter
Punching power: 30 tonWorking area: 3000x1500 mmX-axis movement (+repositioning): 3000 mmY-axis movement: 1500 mmspeed of X-axis: 70 m/Minspeed of Y-axis: 60 m/minspeed combined X+Y: 92 m/minStroke: 40 mmMax. strokes (in 1 mm steps, 1 mm thickness): 1100 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 325 1/minMax. strokes at marking: 1200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 22 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 200 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 7.5 kWHeight: 2310 mmWidth without light barrier: 6300 mmWidth with light barrier: 8300 mmLength without light barrier: 6650 mmLength with light barrier: 7650 mmWeight: 19500 kg
Punching power: 30 ton
Working area: 3000x1500 mm
X-axis movement (+repositioning): 3000 mm
Y-axis movement: 1500 mm
speed of X-axis: 70 m/Min
speed of Y-axis: 60 m/min
speed combined X+Y: 92 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 325 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 200 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 6300 mm
Width with light barrier: 8300 mm
Length without light barrier: 6650 mm
Length with light barrier: 7650 mm
Weight: 19500 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Josting EFS 2800 big size cutterCutting width 2800 cmYear: 2006 –Chrome back table with air.–Knife chage tools
Josting EFS 2800 big size cutter

Cutting width 2800 cm
Year: 2006 –
Chrome back table with air.

–Knife chage tools

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines alimentairesAccessoires et pièces détachées

Anritsu SV Checkweigher, Serial: 4600060685, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph
Anritsu SV Checkweigher, Serial: 4600060685, 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines alimentairesÉquipements de boulangerie et de pâtisserieMachines de découpe

Doyon FC2E Pizza oven, Serial: 7096, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
Doyon FC2E Pizza oven, Serial: 7096, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines alimentairesÉquipements de boulangerie et de pâtisserieMachines de découpe

Doyon FC2E Pizza oven, Serial: 7097, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
Doyon FC2E Pizza oven, Serial: 7097, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines alimentairesÉquipements de boulangerie et de pâtisserieMachines de découpe

Doyon FC2E Pizza oven, Serial: 7092, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph
Doyon FC2E Pizza oven, Serial: 7092, 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
pressing capacity: 150 toCylinder fix or moveable: horizontal moveableStroke: 300 mmDistance between columns: 1070 mmPiston diameter: 280x200 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 2110 mmWidth: 1000 mmHeight: 2480 mmWeight: 1870 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1070 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2110 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1870 kg


L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsPerceuses et aléseusesPerceuses radiales

DONAU DR 40z SchnellradialbohrmaschineTechnische Daten:- Bohrleistung ins volle Stahl ST 60: 40 mm- Bohrleistung GG 25: 50 mm- Gewindeschneiden ST60: M 33- Gewindeschneiden GG 25: M 45- Bohrspindelaufnahme: MK- Spindeldurchmesser: 55 mm- Pinolenhub: 200 mm- 18 Bohrspindeldrehzahlen 35-1800 U/min- Bohrvorschübe 0,075 - 0,60 mm/U- Höhenverstellung der Bohrsäule: 450 mm- Bohrradius min/max: 305 / 1005 mm- Tischgröße: 1200 x 600 mm- Antrieb 400 V / 6 kW- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm- Gewicht: ca.1800 kg
DONAU DR 40z Schnellradialbohrmaschine

Technische Daten:
- Bohrleistung ins volle Stahl ST 60: 40 mm
- Bohrleistung GG 25: 50 mm
- Gewindeschneiden ST60: M 33
- Gewindeschneiden GG 25: M 45
- Bohrspindelaufnahme: MK
- Spindeldurchmesser: 55 mm
- Pinolenhub: 200 mm
- 18 Bohrspindeldrehzahlen 35-1800 U/min
- Bohrvorschübe 0,075 - 0,60 mm/U
- Höhenverstellung der Bohrsäule: 450 mm
- Bohrradius min/max: 305 / 1005 mm
- Tischgröße: 1200 x 600 mm
- Antrieb 400 V / 6 kW
- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm
- Gewicht: ca.1800 kg

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsFraiseusesFraiseuses à outils

DECKEL FP2 Werkzeugfräsmaschinex-Weg: 400 mmy-Weg: 200 mmz-Weg: 400 mmTischaufspannfläche 800x 285 mmSpindelaufnahme ISO 40Spindeldrehzahlen 40 - 2000 U/minPinolenhub 70mmB7XiqgjjziGesamtleistungsbedrf 2,2 kWMaschinengewicht ca. 1,1tRaumbedarf ca. 1,3 x 1,2 1,8 mWerkzeugfräsmaschine mit:3-Achsen Digitalanzeige- Universalfräskopf- Stahlabdeckung für Z-Achse- externer Schaltschrank
DECKEL FP2 Werkzeugfräsmaschine

x-Weg: 400 mm
y-Weg: 200 mm
z-Weg: 400 mm
Tischaufspannfläche 800x 285 mm
Spindelaufnahme ISO 40
Spindeldrehzahlen 40 - 2000 U/min
Pinolenhub 70mm
B7Xiqgjjzi
Gesamtleistungsbedrf 2,2 kW
Maschinengewicht ca. 1,1t
Raumbedarf ca. 1,3 x 1,2 1,8 m
Werkzeugfräsmaschine mit:
3-Achsen Digitalanzeige
- Universalfräskopf
- Stahlabdeckung für Z-Achse
- externer Schaltschrank

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Hydraulische Tafelschere WEIKA 3200x10mmSchnittlänge 3200mmMax. Schnittstärke /Stahl 10mmMax. Schnittstärke /Edelstahl 5mmMax. Schnittstärke/ Alu 10-12mmElekrischer HinteranschlagLichtschrankeFrontauflage mit KugelrollenAntriebsleistung: 11KWAbmaße:Cl3Zr3H0WiLxBxH ca. 3,9x2x1,95 MeterGewicht 8000Kg
Hydraulische Tafelschere WEIKA 3200x10mm

Schnittlänge 3200mm
Max. Schnittstärke /Stahl 10mm
Max. Schnittstärke /Edelstahl 5mm
Max. Schnittstärke/ Alu 10-12mm
Elekrischer Hinteranschlag
Lichtschranke
Frontauflage mit Kugelrollen
Antriebsleistung: 11KW


Abmaße:
Cl3Zr3H0Wi
LxBxH ca. 3,9x2x1,95 Meter
Gewicht 8000Kg

L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.

Sauvegarder la recherche
  • Vous recevrez gratuitement les nouvelles offres par e-mail
  • Vous pouvez mettre fin à la demande de recherche à tout moment
  • Votre adresse électronique ne sera en aucun cas transmise à des tiers
Faites de la publicité ici.
Contactez-nous pour un devis sans engagement.

Obtenir un devis
Vous n`êtes pas encore inscrit ?

Cliquez sur le bouton "Plus d`informations" pour vous informer de nos services et de nos prix.

Pour chacun de nos tarifs proposés, il existe une période d`essai de 6 mois. Essayez-nous gratuitement !

Inscrivez-vous maintenant gratuitement