10
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18620Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 30 mmInjection volume: 85 cm³Shot weight: 76 gInjection pressure: 2180 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgFurther information:The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.Key advantages of the IntElect series:* All-electric direct-drive servo technology* Extremely low energy consumption* High precision and process repeatability* Quiet and low-vibration operation* High dynamic servo performance* Low maintenance requirements* Clean production environment* Ideal solution for technical and precision plastic parts* Suitable for high-speed serial productionThe Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ref. no.: 18620
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 76 g
Injection pressure: 2180 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.
All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.
The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.
The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.
Key advantages of the IntElect series:
* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production
The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.
The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 76 g
Injection pressure: 2180 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.
All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.
The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.
The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.
Key advantages of the IntElect series:
* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production
The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.
The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
pressing capacity: 320 toBending length: 4050 mmAxes: Y1 / Y2 / X and R axisStroke: 365 mmInside distance between side frames: 3600 mmGap in side frame: 410 mmDaylight: 630 mmPower concept: hydraulicrapid speed Y-axis: 160 mm/sWorking speed Y-axis: 10Retractionspeed Y-axis: 160Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 154 mmLength: 5300 mmWidth: 1910 mmHeight: 3230 mmWeight: 20100 kg
pressing capacity: 320 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Length: 5300 mm
Width: 1910 mm
Height: 3230 mm
Weight: 20100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Length: 5300 mm
Width: 1910 mm
Height: 3230 mm
Weight: 20100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
_thumb.png "Afficher l`annonce")
_thumb.png "Afficher l`annonce")
13
Technologie de convoyagePompes
Ref. no.: 18637Manufacturer: BUSCHYear of construction: 2010Further information: Make | Model | Year | Capacity | Frequency |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |BUSCH MINK MM 1252 AV VACUUM PUMPSA total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale.The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications.TECHNICAL SPECIFICATIONS• Manufacturer: Busch• Model: MINK MM 1252 AV• Technology: Dry Claw / Oil-Free Vacuum Technology• Capacity: 250 – 300 m³/h• Final Vacuum: 100 hPa (0.1 bar)• Frequency: 50/60 Hz• Year of Manufacture: 2009 / 2010• Origin: GermanyMAIN ADVANTAGES• Oil-free operating system• Low maintenance costs• Energy-efficient operation• Quiet and reliable performance• Suitable for continuous industrial operation• High Busch quality with worldwide service supportAPPLICATION AREAS• Plastic injection molding machines• Central vacuum systems• Packaging machines• Thermoforming systems• Automation and conveying systems• Industrial production facilities
Ref. no.: 18637
Manufacturer: BUSCH
Year of construction: 2010
Further information:
Make | Model | Year | Capacity | Frequency |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
BUSCH MINK MM 1252 AV VACUUM PUMPS
A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale.
The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications.
TECHNICAL SPECIFICATIONS
• Manufacturer: Busch
• Model: MINK MM 1252 AV
• Technology: Dry Claw / Oil-Free Vacuum Technology
• Capacity: 250 – 300 m³/h
• Final Vacuum: 100 hPa (0.1 bar)
• Frequency: 50/60 Hz
• Year of Manufacture: 2009 / 2010
• Origin: Germany
MAIN ADVANTAGES
• Oil-free operating system
• Low maintenance costs
• Energy-efficient operation
• Quiet and reliable performance
• Suitable for continuous industrial operation
• High Busch quality with worldwide service support
APPLICATION AREAS
• Plastic injection molding machines
• Central vacuum systems
• Packaging machines
• Thermoforming systems
• Automation and conveying systems
• Industrial production facilities
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Manufacturer: BUSCH
Year of construction: 2010
Further information:
Make | Model | Year | Capacity | Frequency |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
BUSCH MINK MM 1252 AV VACUUM PUMPS
A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale.
The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications.
TECHNICAL SPECIFICATIONS
• Manufacturer: Busch
• Model: MINK MM 1252 AV
• Technology: Dry Claw / Oil-Free Vacuum Technology
• Capacity: 250 – 300 m³/h
• Final Vacuum: 100 hPa (0.1 bar)
• Frequency: 50/60 Hz
• Year of Manufacture: 2009 / 2010
• Origin: Germany
MAIN ADVANTAGES
• Oil-free operating system
• Low maintenance costs
• Energy-efficient operation
• Quiet and reliable performance
• Suitable for continuous industrial operation
• High Busch quality with worldwide service support
APPLICATION AREAS
• Plastic injection molding machines
• Central vacuum systems
• Packaging machines
• Thermoforming systems
• Automation and conveying systems
• Industrial production facilities
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Machines alimentairesMachines d'emballage
Secomak Shrink tunnel, Serial: 6905, 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph
Secomak Shrink tunnel, Serial: 6905, 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines d'impressionAutres
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPresses
Kodak NEXPRESS SX3300 Press long-sheet feeder, 2010
Kodak NEXPRESS SX3300 Press long-sheet feeder, 2010
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines d'impressionMachines à relier
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines d'impressionMachines d'impression
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines d'impressionAutres
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines d'impressionMachines de découpe
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines d'impressionAutres
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsAccessoires et pièces détachées
Length: 2010 mmWidth: 680 mmHeight: 880 mmWeight: 150 kg
Length: 2010 mm
Width: 680 mm
Height: 880 mm
Weight: 150 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Width: 680 mm
Height: 880 mm
Weight: 150 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPressesPresses excentriques
pressing capacity: 80 toTable length: 900 mmTable width: 540 mmHole in table: 180 mmStroke: 4 - 102 mmStrokes: 54 1/minRam: 490x325 mmThroat depth: 280 mmDaylight: 380 mmMotor: 7.5 kWLength: 2010 mmWidth: 1390 mmHeight: 2750 mmWeight: 5400 kg
pressing capacity: 80 to
Table length: 900 mm
Table width: 540 mm
Hole in table: 180 mm
Stroke: 4 - 102 mm
Strokes: 54 1/min
Ram: 490x325 mm
Throat depth: 280 mm
Daylight: 380 mm
Motor: 7.5 kW
Length: 2010 mm
Width: 1390 mm
Height: 2750 mm
Weight: 5400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Table length: 900 mm
Table width: 540 mm
Hole in table: 180 mm
Stroke: 4 - 102 mm
Strokes: 54 1/min
Ram: 490x325 mm
Throat depth: 280 mm
Daylight: 380 mm
Motor: 7.5 kW
Length: 2010 mm
Width: 1390 mm
Height: 2750 mm
Weight: 5400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines alimentairesTechnologie de refroidissementRéfrigérateurs
HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph
HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Machines alimentairesTechnologie de restaurationMachines à laver
IWM SAN100 SP Sanitiser tunnel, 2010, stainless, aperture 600mm x 600mm, belt dimensions 1800mm x 600mm, with recirculation tank, filter, level sensor, 3Ph
IWM SAN100 SP Sanitiser tunnel, 2010, stainless, aperture 600mm x 600mm, belt dimensions 1800mm x 600mm, with recirculation tank, filter, level sensor, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines alimentairesProduction de boissonsPompes
Grundfos CHI2-30 A-W-G Pump, 2010, 2900RPM, 2.5M3/H, rated head 19M, 19mm impeller, max operating pressure 10bar, 3Ph (two in stock)
Grundfos CHI2-30 A-W-G Pump, 2010, 2900RPM, 2.5M3/H, rated head 19M, 19mm impeller, max operating pressure 10bar, 3Ph (two in stock)
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines alimentairesTraitement de la viande
Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals
Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Machines alimentairesTraitement de la viande
Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available
Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Machines alimentairesTraitement de la viande
Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph
Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Machines alimentairesProduction de boissonsPompes
Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec
Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines alimentairesProduction de boissonsPompes
Sigma S2CAHM07120PVT Metering pump, Serial: 2010132518, 2010, 0.25Kw, Metering pumps, 3 in stock
Sigma S2CAHM07120PVT Metering pump, Serial: 2010132518, 2010, 0.25Kw, Metering pumps, 3 in stock
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines alimentairesConteneurs, étagères et réservoirs
Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,
Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Machines alimentairesTraitement de la viande
AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes
AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
9
Technique de l'air compriméPompes
For Sale: 2x Gardner Denver DLR 300 Pumps with Control Cabinet and Mounting PlatesBrand/Model: Elmo Rietschle / Gardner Denver DLR 300Year of Manufacture: 2010Capacity: 300 m³/hourPressure: 1.4 barPower: 11 kW per pumpYear: 2010Includes:Control cabinet with Siemens S7 PLC and pre-installed program2x Danfoss VLT frequency regulators (11 kW each)2 mounting plates for pump installationCondition: Removed in working condition from an industrial facilityA well-maintained set, ideal for various industrial applications.📩 Contact us for pricing and more details!
For Sale: 2x Gardner Denver DLR 300 Pumps with Control Cabinet and Mounting Plates
Brand/Model: Elmo Rietschle / Gardner Denver DLR 300
Year of Manufacture: 2010
Capacity: 300 m³/hour
Pressure: 1.4 bar
Power: 11 kW per pump
Year: 2010
Includes:
Control cabinet with Siemens S7 PLC and pre-installed program
2x Danfoss VLT frequency regulators (11 kW each)
2 mounting plates for pump installation
Condition: Removed in working condition from an industrial facility
A well-maintained set, ideal for various industrial applications.
📩 Contact us for pricing and more details!
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Brand/Model: Elmo Rietschle / Gardner Denver DLR 300
Year of Manufacture: 2010
Capacity: 300 m³/hour
Pressure: 1.4 bar
Power: 11 kW per pump
Year: 2010
Includes:
Control cabinet with Siemens S7 PLC and pre-installed program
2x Danfoss VLT frequency regulators (11 kW each)
2 mounting plates for pump installation
Condition: Removed in working condition from an industrial facility
A well-maintained set, ideal for various industrial applications.
📩 Contact us for pricing and more details!
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de découpe plasma
Working area: 1000x2000 mmPlasma source: HYPERTHERM Powermax 45Max. thickness - mild steel: 6 mmMax. piercing thickness - mild steel: 12 mmMax. tickness for separating cut: 25 mmRecommended thickness (unalloyed steel):: 4 mmCurrent: 45 ACurrent / power-on time: 45 A 50 % ED, 32 A 100 % ED ARapid speed: 24 m/minRepeat accuracy: unter 1/10 mmVolume water tray:: 300 ltMax. weight on table: 400 kg/m²Length: 2560 mmWidth: 1460 mmHeight: 1500 mmWeight: 400 kg
Working area: 1000x2000 mm
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Plasma source: HYPERTHERM Powermax 45
Max. thickness - mild steel: 6 mm
Max. piercing thickness - mild steel: 12 mm
Max. tickness for separating cut: 25 mm
Recommended thickness (unalloyed steel):: 4 mm
Current: 45 A
Current / power-on time: 45 A 50 % ED, 32 A 100 % ED A
Rapid speed: 24 m/min
Repeat accuracy: unter 1/10 mm
Volume water tray:: 300 lt
Max. weight on table: 400 kg/m²
Length: 2560 mm
Width: 1460 mm
Height: 1500 mm
Weight: 400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines alimentairesTraitement de la viande
Kaeser SX3T Compressor, Serial: 2268, 2010, 2.2Kw, 11.0Bar, 3Ph
Kaeser SX3T Compressor, Serial: 2268, 2010, 2.2Kw, 11.0Bar, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines alimentairesTraitement de la viande
Kaeser SX3T Compressor, Serial: 2266, 2010, 2.2Kw, 11.0Bar, 3Ph
Kaeser SX3T Compressor, Serial: 2266, 2010, 2.2Kw, 11.0Bar, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines alimentairesÉquipements de boulangerie et de pâtisserieMachines de découpe
Trancheuse à viande ABM Unique 350G Série : 378 2010, trancheuse à viande en inox, lame diamètre 350 mm, 200RPM, 1Ph
Trancheuse à viande ABM Unique 350G Série : 378 2010, trancheuse à viande en inox, lame diamètre 350 mm, 200RPM, 1Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Machines alimentairesAutres
Technogel 4000E Rotary filling machine, Serial: RA1091/01E, 2010, Stainless, compact rotary filling machines, capacity 4000 pcs per hour, HMI screen controls, variable speed, mobile, 3Ph
Technogel 4000E Rotary filling machine, Serial: RA1091/01E, 2010, Stainless, compact rotary filling machines, capacity 4000 pcs per hour, HMI screen controls, variable speed, mobile, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Machines alimentairesProduction de boissonsPompes
Technogel PA20A-45L Ripple pump, Ripple pump, 2010, Stainless, 15L tank capacity, pump capacity 1L per min, mobile, can be connected to freezer and filling machine
Technogel PA20A-45L Ripple pump, Ripple pump, 2010, Stainless, 15L tank capacity, pump capacity 1L per min, mobile, can be connected to freezer and filling machine
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines alimentairesTraitement de la viande
Hitema ECA012 chiller, Serial: W07G8986, 2010, chiller, max pressure 28bar, refrigerant R407C, max pressure water side 3bar, max amps 14.6A, 3Ph
Hitema ECA012 chiller, Serial: W07G8986, 2010, chiller, max pressure 28bar, refrigerant R407C, max pressure water side 3bar, max amps 14.6A, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 320 toBending length: 4050 mmAxes: Y1 / Y2 / Xrapid speed Y-axis: 160 mm/sStroke: 365 mmInside distance between side frames: 3600 mmGap in side frame: 450 mmDaylight: 630 mmPower concept: hydraulicWorking speed Y-axis: 10Retractionspeed Y-axis: 140Back gauge speed X-axis: 500Back gauge speed R-axis: 350 mm/sBack gauge travel R-axis: 250 mmTable height: 900 mmTable width: 154 mmOiltank: 250 lMotor power: 18.5 kWLength: 5250 mmWidth: 1770 mmHeight: 2850 mmWeight: 20000 kg
Bending force: 320 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X
rapid speed Y-axis: 160 mm/s
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1770 mm
Height: 2850 mm
Weight: 20000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 4050 mm
Axes: Y1 / Y2 / X
rapid speed Y-axis: 160 mm/s
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 450 mm
Daylight: 630 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 140
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Oiltank: 250 l
Motor power: 18.5 kW
Length: 5250 mm
Width: 1770 mm
Height: 2850 mm
Weight: 20000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines alimentairesMachines d'emballage
Bljalbers pot sealer, 2010, Stainless pot sealer, seal up to 6 pots at once, adjustable temp control, previously used for 100mm diameter pots, mobile frame, 1Ph
Bljalbers pot sealer, 2010, Stainless pot sealer, seal up to 6 pots at once, adjustable temp control, previously used for 100mm diameter pots, mobile frame, 1Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Machines alimentairesAutres
2010, Stainless height adjustable frame, 25Kg hopper, fill range 10g - 100g, mobile, 1Ph
2010, Stainless height adjustable frame, 25Kg hopper, fill range 10g - 100g, mobile, 1Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Machines alimentairesTraitement de la viande
2010, Stainless frame and stainless mesh belt, 3000mm x 380mm belt, variable speed, with Hydromatik steam generator, 3Ph
2010, Stainless frame and stainless mesh belt, 3000mm x 380mm belt, variable speed, with Hydromatik steam generator, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Génie des procédésCompresseurs
100 litres
2KW
100 litres
2KW
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2KW
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.