7
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18657Hersteller: ENGELYear of construction: 2016Clamping unitClamping force: 160 tonOpening stroke: 900 mmMould height min.: 300 mmMould height max.: 600 mmPlaten size (h x v): 750 X 750 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 151 gInjection pressure: 2400 barMeasurements and weightDimensions: 5,7 X 1,8 X 2,2 mMachine weight: 10200 kgFurther information:Tie-bar-less + electric injection = maximum flexibility and precisionENGEL e-victory 440/160:👉 This is a hybrid machine (servo-hydraulic + electric)⸻🔍 How it works✔ Electric part:* Injection unit (screw movement)* Ensures very high precision and process stability✔ Hydraulic part:* Clamping unit (mould closing)* Maintains clamping force efficiently without continuous energy consumption👉 This system combines:* The precision of an all-electric machine* With the power and efficiency of a hydraulic systemThis is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design.The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing.Key features:* Tie-bar-less design for maximum mould flexibility* Servo-hydraulic drive for high energy efficiency* Precise and stable processing performance* Compact footprint with a large mould installation area* Modern ENGEL control systemThe machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures.Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.
Ref. no.: 18657
Hersteller: ENGEL
Year of construction: 2016
Clamping unit
Clamping force: 160 ton
Opening stroke: 900 mm
Mould height min.: 300 mm
Mould height max.: 600 mm
Platen size (h x v): 750 X 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 151 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 5,7 X 1,8 X 2,2 m
Machine weight: 10200 kg
Further information:
Tie-bar-less + electric injection = maximum flexibility and precision
ENGEL e-victory 440/160:
👉 This is a hybrid machine (servo-hydraulic + electric)
⸻
🔍 How it works
✔ Electric part:
* Injection unit (screw movement)
* Ensures very high precision and process stability
✔ Hydraulic part:
* Clamping unit (mould closing)
* Maintains clamping force efficiently without continuous energy consumption
👉 This system combines:
* The precision of an all-electric machine
* With the power and efficiency of a hydraulic system
This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design.
The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing.
Key features:
* Tie-bar-less design for maximum mould flexibility
* Servo-hydraulic drive for high energy efficiency
* Precise and stable processing performance
* Compact footprint with a large mould installation area
* Modern ENGEL control system
The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures.
Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ENGEL
Year of construction: 2016
Clamping unit
Clamping force: 160 ton
Opening stroke: 900 mm
Mould height min.: 300 mm
Mould height max.: 600 mm
Platen size (h x v): 750 X 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 151 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 5,7 X 1,8 X 2,2 m
Machine weight: 10200 kg
Further information:
Tie-bar-less + electric injection = maximum flexibility and precision
ENGEL e-victory 440/160:
👉 This is a hybrid machine (servo-hydraulic + electric)
⸻
🔍 How it works
✔ Electric part:
* Injection unit (screw movement)
* Ensures very high precision and process stability
✔ Hydraulic part:
* Clamping unit (mould closing)
* Maintains clamping force efficiently without continuous energy consumption
👉 This system combines:
* The precision of an all-electric machine
* With the power and efficiency of a hydraulic system
This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design.
The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing.
Key features:
* Tie-bar-less design for maximum mould flexibility
* Servo-hydraulic drive for high energy efficiency
* Precise and stable processing performance
* Compact footprint with a large mould installation area
* Modern ENGEL control system
The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures.
Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
12
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18597Hersteller: ENGELYear of construction: 2007Clamping unitClamping force: 70 tonOpening stroke: 305 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2381 barMeasurements and weightDimensions: 4,0 x 1,8 x 2,5 mMachine weight: 5600 kgFurther information:The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.The ENGEL INSERT series is particularly suitable for:* insert molding applications* metal/plastic combination parts* electronic component production* connector and cable technology* technical plastic parts* precision industrial productsWith its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
Ref. no.: 18597
Hersteller: ENGEL
Year of construction: 2007
Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar
Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg
Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.
One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.
Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.
The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.
The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.
The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.
The ENGEL INSERT series is particularly suitable for:
* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products
With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ENGEL
Year of construction: 2007
Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar
Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg
Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.
One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.
Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.
The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.
The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.
The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.
The ENGEL INSERT series is particularly suitable for:
* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products
With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
Spuitgietmachines
Ref. no.: 17540Hersteller: ARBURGYear of construction: 1994Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 270 X 270 mmMould height min.: 200 mmPlaten size (h x v): 405 X405 mmInjection unitScrew diameter: 25 mmInjection volume: 67 cm³Shot weight: 61 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,3 X 1,5 X 2,0 mMachine weight: 2400 kg
Ref. no.: 17540
Hersteller: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18643Hersteller: ARBURGYear of construction: 2008Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 470 x 470 mmMould height min.: 250 mmOpening width: 750 mmInjection unitScrew diameter: 35 mmInjection volume: 154 cm³Shot weight: 141 gInjection pressure: 2500 barMeasurements and weightMachine weight: 4850 kgDimensions LxWxH part 1: 4,6 x 1,6 x 2,1 mAdditional information & extrasCore pull: 1 pcsFurther information:Communication card for ProSeS interface is available (OPC-UA).Robot interface is available (EUROMAP 67).
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
10
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18565Hersteller: DEMAGYear of construction: 2005Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 500 x 500 mmMould height min.: 250 mmOpening width: 750 mmPlaten size (h x v): 750 x 750 mmInjection unitScrew diameter: 45 mmInjection volume: 323 cm³Shot weight: 290 gInjection pressure: 1973 barMeasurements and weightDimensions: 5.45 x 1.63 x 2.1 mMachine weight: 7500 kgRobotProducer: Wittmann Type: W721-0231 Year: 2005
Ref. no.: 18565
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18591Hersteller: ARBURGYear of construction: 2005Clamping unitClamping force: 160 tonOpening stroke: 450 mmDistance between tie bars: 520 x 520 mmMould height min.: 250 mmMould height max.: 550 mmOpening width: 700 mmPlaten size (h x v): 695 x 695 mmInjection unitScrew diameter: 45 mmInjection volume: 254 cm³Shot weight: 232 gInjection pressure: 1580 barMeasurements and weightMachine weight: 7100 kgDimensions LxWxH part 1: 5,1 x 1,7 x 2,3 mFurther information:The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.Typical features of this series include:* Fully electric drive for all main movements* High energy efficiency compared to hydraulic machines* Excellent injection and positioning accuracy* Quiet and clean operation (also suitable for medical applications)* Low maintenance requirementsThe 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Ref. no.: 18591
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
10
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18494Hersteller: ENGELYear of construction: 2013Clamping unitClamping force: 50 tonOpening stroke: 400 mmMould height min.: 200 mmOpening width: 600 mmPlaten size (h x v): 500 X 450 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2400 barMeasurements and weightDimensions: 3,4 x 1,3 x 1,8 mMachine weight: 2900 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
_thumb.jpg "Toon advertentie")
_thumb.jpg "Toon advertentie")
_thumb.jpg "Toon advertentie")
13
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18588Hersteller: BATTENFELDYear of construction: 2007Clamping unitClamping force: 30 tonDistance between tie bars: 300 x 300 mmMould height min.: 150 mmMould height max.: 330 mmOpening width: 580 mmPlaten size (h x v): 450 x 450 mmInjection unitScrew diameter: 18 mmInjection volume: 19 cm³Shot weight: 17,5 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,5 x 1,1 x 1,9 mMachine weight: 2700 kgFurther information:BATTENFELD EM 30/55 UNILOG B6All-Electric Precision Injection Moulding MachineThe offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:* very low energy consumption* high repeatability and precision* quiet machine operation* low maintenance requirementsThe machine is especially suitable for:* technical plastic parts* medical products* electronic components* small precision partsThanks to its all-electric drive technology, the machine offers:* significantly lower energy consumption compared to hydraulic machines* clean production environment* stable cycle times* precise dosing and excellent process stabilityThe machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Further information:
BATTENFELD EM 30/55 UNILOG B6
All-Electric Precision Injection Moulding Machine
The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.
The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:
* very low energy consumption
* high repeatability and precision
* quiet machine operation
* low maintenance requirements
The machine is especially suitable for:
* technical plastic parts
* medical products
* electronic components
* small precision parts
Thanks to its all-electric drive technology, the machine offers:
* significantly lower energy consumption compared to hydraulic machines
* clean production environment
* stable cycle times
* precise dosing and excellent process stability
The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.
With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.
The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Further information:
BATTENFELD EM 30/55 UNILOG B6
All-Electric Precision Injection Moulding Machine
The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.
The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:
* very low energy consumption
* high repeatability and precision
* quiet machine operation
* low maintenance requirements
The machine is especially suitable for:
* technical plastic parts
* medical products
* electronic components
* small precision parts
Thanks to its all-electric drive technology, the machine offers:
* significantly lower energy consumption compared to hydraulic machines
* clean production environment
* stable cycle times
* precise dosing and excellent process stability
The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.
With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.
The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
12
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18587Hersteller: FERROMATIK MILACRONYear of construction: 2001Clamping unitClamping force: 200 tonOpening stroke: 750 mmDistance between tie bars: 560 x 560 mmMould height min.: 300 mmOpening width: 1050 mmPlaten size (h x v): 830 x 830 mmInjection unitScrew diameter: 50 mmInjection volume: 416 cm³Shot weight: 375 gMeasurements and weightDimensions: 6,9 x 2,0 x 2,6 mMachine weight: 13000 kgRobotProducer: Geiger Type: LR 200
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 416 cm³
Shot weight: 375 g
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Robot
Producer: Geiger
Type: LR 200
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 416 cm³
Shot weight: 375 g
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Robot
Producer: Geiger
Type: LR 200
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18586Hersteller: KRAUSS MAFFEIYear of construction: 2011Clamping unitClamping force: 180 tonOpening stroke: 1050 mmDistance between tie bars: 560 × 510 mmMould height min.: 200 mmMould height max.: 600 mmPlaten size (h x v): 790 × 740 mmInjection unitScrew diameter: 50 mmInjection volume: 393 cm³Shot weight: 357 gInjection pressure: 1892 barMeasurements and weightDimensions: 6,07 x 1,92 x 2,01 mMachine weight: 6500 kgFurther information:👉Fully electric machine offering maximum precision, lowest energy consumption and highest process stabilityhis machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.Key features:* Solid and durable construction for long-term operation* High injection performance and process stability* Reliable KraussMaffei MC5 control system* Suitable for continuous industrial use* Good availability of spare partsThe machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
Spuitgietmachines
Ref. no.: 17147Hersteller: ENGELYear of construction: 2008Clamping unitClamping force: 400 tonOpening stroke: 1008 mmPlaten size (h x v): 1360 x 1460 mmInjection unitScrew diameter: 60 + 25 + 25+ 25+ 25 mmInjection volume: 608 + 54 + 54 + 54 + 54 cm³Shot weight: 547 + 48 + 48 + 48 + 48 gInjection pressure: 1725 + 1200 + 1200 + 1200 + 1200 barMeasurements and weightMachine weight: 22.000 + 6.600 kgDimensions LxWxH part 1: 5 x 2,3 x mDimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
12
Spuitgietmachines
Ref. no.: 17146Hersteller: ENGELYear of construction: 2004Clamping unitClamping force: 300 tonOpening stroke: 855 mmInjection unitScrew diameter: 50 + 25 mmInjection volume: 393 + 49 cm³Shot weight: 354 + 44 gInjection pressure: 1917 + 1586 barMeasurements and weightDimensions: 6,5 x 2,3 x mMachine weight: 21000 kg
Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
SpuitgietmachinesKunststof spuitgietmachines
ref. nr.: 18255
Hersteller: ENGEL
Bouwjaar: 2004
Klem eenheid
Klemkracht: 180 ton
Openingsslag: 750 mm
Afstand tussen trekstangen: 960 x830 mm
Matrijshoogte min.: 500 mm
Openingsbreedte: 1250 mm
Injectie-eenheid
Schroefdiameter: 45 mm
Injectievolume: 318 cm³
Schotgewicht: 302 g
Injectiedruk: 1769/2360 bar
Afmetingen en gewicht
Machinegewicht: 13500 kg
Robot
Producent: Wittman
Soort: W743
Jaar: 2009
ref. nr.: 18255
Hersteller: ENGEL
Bouwjaar: 2004
Klem eenheid
Klemkracht: 180 ton
Openingsslag: 750 mm
Afstand tussen trekstangen: 960 x830 mm
Matrijshoogte min.: 500 mm
Openingsbreedte: 1250 mm
Injectie-eenheid
Schroefdiameter: 45 mm
Injectievolume: 318 cm³
Schotgewicht: 302 g
Injectiedruk: 1769/2360 bar
Afmetingen en gewicht
Machinegewicht: 13500 kg
Robot
Producent: Wittman
Soort: W743
Jaar: 2009
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: ENGEL
Bouwjaar: 2004
Klem eenheid
Klemkracht: 180 ton
Openingsslag: 750 mm
Afstand tussen trekstangen: 960 x830 mm
Matrijshoogte min.: 500 mm
Openingsbreedte: 1250 mm
Injectie-eenheid
Schroefdiameter: 45 mm
Injectievolume: 318 cm³
Schotgewicht: 302 g
Injectiedruk: 1769/2360 bar
Afmetingen en gewicht
Machinegewicht: 13500 kg
Robot
Producent: Wittman
Soort: W743
Jaar: 2009
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
6
Temperatuurregeleenheden
Temperaturbereich: Max. 30 °CHeizleistung: . kWKühlleistung: . WUmlaufmedium: 30 GradGesamtleistungsbedarf: 4,5 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Temperaturbereich: Max. 30 °C
Heizleistung: . kW
Kühlleistung: . W
Umlaufmedium: 30 Grad
Gesamtleistungsbedarf: 4,5 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Heizleistung: . kW
Kühlleistung: . W
Umlaufmedium: 30 Grad
Gesamtleistungsbedarf: 4,5 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
7
Temperatuurregeleenheden
Literleistung: . lTemperaturbereich: 5-400 °CGesamtleistungsbedarf: . kWMaschinengewicht ca.: . tRaumbedarf ca.: . m
Literleistung: . l
Temperaturbereich: 5-400 °C
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Temperaturbereich: 5-400 °C
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
11
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 18142Producer: DEMAGYear of construction: 1997Clamping unitClamping force: 50 tonOpening stroke: 400 mmDistance between tie bars: 355 x 355 mmMould height min.: 210 mmPlaten size (h x v): 540 x 540 mmInjection unitScrew diameter: 35 mmInjection volume: 106 cm³Shot weight: 95 gInjection pressure: 2573 barMeasurements and weightDimensions: 3,65 x 1,15 x 1,18 mMachine weight: 3600-2500 kg
Ref. no.: 18142
Producer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Producer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
SpuitgietmachinesMeercomponenten spuitgietmachines
Ref. no.: 18092Producer: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 25250 kg
Ref. no.: 18092
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
11
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 17507Producer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg
Ref. no.: 17507
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
SpuitgietmachinesKunststof spuitgietmachines
Ref. no.: 16369Hersteller: BATTENFELDYear of construction: 2005Clamping unitClamping force: 75 tonOpening stroke: 800 mmDistance between tie bars: 405 x 405 mmMould height min.: 150 mmMould height max.: 480 mmInjection unitScrew diameter: 18 mmInjection volume: 30 cm³Shot weight: 27 gInjection pressure: 2440 barMeasurements and weightDimensions: 4,5 x 1,7 x 2,0 mMachine weight: 4500 kgFurther information:BATTENFELD EM 75/120 UNILOG B4All-Electric Precision Injection Moulding MachineThe BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.All major machine movements are driven by modern servo motors, providing:* very low energy consumption* high repeatability and precision* smooth and quiet machine operation* low maintenance requirements* stable and accurate production performanceThe machine is especially suitable for:* technical plastic components* electronic parts* precision moulded products* small and medium-sized production runsCompared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:* user-friendly operation* precise process control* stable cycle times* accurate servo axis managementThe machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:* a clean electrical cabinet* well-maintained mechanical components* properly kept servo-electric units* a clean injection unitThe BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
11
Walzenbreite: 450 mmWalzendurchmesser - oben: 203 mmWalzendurchmesser - unten: 203 mmLeistung: 8,8 kw
Walzenbreite: 450 mm
Walzendurchmesser - oben: 203 mm
Walzendurchmesser - unten: 203 mm
Leistung: 8,8 kw
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Walzendurchmesser - oben: 203 mm
Walzendurchmesser - unten: 203 mm
Leistung: 8,8 kw
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
10
Druck: 650 tDurchgangsbreite: 920 mmHub: 1500 mmTischfläche: 2000x1500 mmStößelfläche: 2000x1500 mmEinbauhöhe: 2100 mmHydraulik: 250 barSchließgeschwindigkeit: 500 mm/secPreßgeschwindigkeit: 0,5-10,4 mm/secLoch im Stößel Durchmesser/Tiefe: mmÖffnungsgeschwindigkeit: 250 mm/250Gesamtleistungsbedarf: kWMaschinengewicht ca.: 47 tRaumbedarf ca.: m
Druck: 650 t
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.