1
DrukmachinesOverige
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
13
KunststofverwerkingsmachinesSpuitgietmachines
Ref. no.: 17540Manufacturer: ARBURGYear of construction: 1994Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 270 X 270 mmMould height min.: 200 mmPlaten size (h x v): 405 X405 mmInjection unitScrew diameter: 25 mmInjection volume: 67 cm³Shot weight: 61 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,3 X 1,5 X 2,0 mMachine weight: 2400 kgFurther information:Laboratory Machine with Exceptionally Low Operating HoursThe offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.The control system shows only approximately 100 operating hours and just 867 machine cycles.The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
Ref. no.: 17540
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
3
Metaalbewerking en werktuigmachinesPersenGaragepersen
pressing capacity: 100 toCylinder fix or moveable: horizontal moveableStroke: 500 mmDaylight: 700 mmDistance between columns: 1550 mmRapid speed: 25 mm/sWorking speed: 2 mm/sLength: 2400 mmWidth: 1200 mmHeight: 2450 mmWeight: 1960 kg
pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 1550 mm
Rapid speed: 25 mm/s
Working speed: 2 mm/s
Length: 2400 mm
Width: 1200 mm
Height: 2450 mm
Weight: 1960 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Cylinder fix or moveable: horizontal moveable
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 1550 mm
Rapid speed: 25 mm/s
Working speed: 2 mm/s
Length: 2400 mm
Width: 1200 mm
Height: 2450 mm
Weight: 1960 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
7
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachines
pressing capacity: 200 toStroke: 500 mmTable: 2.500 x 2.050 mmDaylight: 800 mmRapid speed: 20 mm/sWorking speed: 2 mm/sCylinder fix or moveable: horizontal moveableDistance between columns: 2050 mmHorizontal movable cylinder: 1450 mmHydraulicaly movable stand: 1600 mmLength: 2950 mmWidth: 2500 mmHeight: 2600 mmWeight: 6500 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1450 mm
Hydraulicaly movable stand: 1600 mm
Length: 2950 mm
Width: 2500 mm
Height: 2600 mm
Weight: 6500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1450 mm
Hydraulicaly movable stand: 1600 mm
Length: 2950 mm
Width: 2500 mm
Height: 2600 mm
Weight: 6500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
6
Metaalbewerking en werktuigmachinesPersenExcentrische persen
pressing capacity: 20 toTonnage rating point: 1.7 mmTable length: 360 mmTable width: 550 mmHole in table: 140 mmStroke: 1 - 50 mmStrokes: 160 1/minRam guides: 4Ram adjustment: 40 mmRam hole: 35 mmThroat depth: 200 mmDaylight: 240 mmMotor: 2.2 kWLength: 1360 mmWidth: 1100 mmHeight: 1860 mmWeight: 1250 kg
pressing capacity: 20 to
Tonnage rating point: 1.7 mm
Table length: 360 mm
Table width: 550 mm
Hole in table: 140 mm
Stroke: 1 - 50 mm
Strokes: 160 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 35 mm
Throat depth: 200 mm
Daylight: 240 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1860 mm
Weight: 1250 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Tonnage rating point: 1.7 mm
Table length: 360 mm
Table width: 550 mm
Hole in table: 140 mm
Stroke: 1 - 50 mm
Strokes: 160 1/min
Ram guides: 4
Ram adjustment: 40 mm
Ram hole: 35 mm
Throat depth: 200 mm
Daylight: 240 mm
Motor: 2.2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1860 mm
Weight: 1250 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesPlaatscharen
Cutting length: 2050 mmMax. thickness - mild steel: 3 mmStrokes: 35 1/minCutting angle: 1.5 °Back gauge: 750 mmMotor power: 3 kWTable height: 800 mmTable width: 520 mmLength: 2720 mmWidth: 1575 mmHeight: 1230 mmWeight: 1900 kg
Cutting length: 2050 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1.5 °
Back gauge: 750 mm
Motor power: 3 kW
Table height: 800 mm
Table width: 520 mm
Length: 2720 mm
Width: 1575 mm
Height: 1230 mm
Weight: 1900 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1.5 °
Back gauge: 750 mm
Motor power: 3 kW
Table height: 800 mm
Table width: 520 mm
Length: 2720 mm
Width: 1575 mm
Height: 1230 mm
Weight: 1900 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
6
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesPlaatscharen
Cutting length: 1050 mmMax. thickness - mild steel: 6 mmStrokes: 30 1/minCutting angle: 2.3 °Back gauge: 750 mmMotor power: 7 kWTable height: 800 mmTable width: 530 mmTable length: 1355 mmLength: 1720 mmWidth: 1630 mmHeight: 1230 mmWeight: 2000 kg
Cutting length: 1050 mm
Max. thickness - mild steel: 6 mm
Strokes: 30 1/min
Cutting angle: 2.3 °
Back gauge: 750 mm
Motor power: 7 kW
Table height: 800 mm
Table width: 530 mm
Table length: 1355 mm
Length: 1720 mm
Width: 1630 mm
Height: 1230 mm
Weight: 2000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Max. thickness - mild steel: 6 mm
Strokes: 30 1/min
Cutting angle: 2.3 °
Back gauge: 750 mm
Motor power: 7 kW
Table height: 800 mm
Table width: 530 mm
Table length: 1355 mm
Length: 1720 mm
Width: 1630 mm
Height: 1230 mm
Weight: 2000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesAccessoires en reserveonderdelen
Jaw opening: 200 mmjaw height: 63 mmOpening of upper beam: 160 mm
Jaw opening: 200 mm
jaw height: 63 mm
Opening of upper beam: 160 mm
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
jaw height: 63 mm
Opening of upper beam: 160 mm
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachines
pressing capacity: 200 toStroke: 500 mmTable: 1000x600 mmDaylight: 640 mmRapid speed: 21 mm/sWorking speed: 2 mm/sMotor: 5.5 kWLength: 1800 mmWidth: 1300 mmHeight: 2500 mmWeight: 6400 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Stroke: 500 mm
Table: 1000x600 mm
Daylight: 640 mm
Rapid speed: 21 mm/s
Working speed: 2 mm/s
Motor: 5.5 kW
Length: 1800 mm
Width: 1300 mm
Height: 2500 mm
Weight: 6400 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachines
pressing capacity: 150 toStroke: 500 mmTable: 800x600 mmDaylight: 630 mmRapid speed: 22 mm/sWorking speed: 3 mm/sMotor: 4 kWLength: 1800 mmWidth: 1200 mmHeight: 2400 mmWeight: 4500 kg
pressing capacity: 150 to
Stroke: 500 mm
Table: 800x600 mm
Daylight: 630 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 1800 mm
Width: 1200 mm
Height: 2400 mm
Weight: 4500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Stroke: 500 mm
Table: 800x600 mm
Daylight: 630 mm
Rapid speed: 22 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 1800 mm
Width: 1200 mm
Height: 2400 mm
Weight: 4500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachines
pressing capacity: 40 toStroke: 500 mmTable: 700x500 mmDaylight: 600 mmRapid speed: 26 mm/sWorking speed: 9 mm/sMotor: 4 kWLength: 1400 mmWidth: 900 mmHeight: 2200 mmWeight: 1300 kg
pressing capacity: 40 to
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Stroke: 500 mm
Table: 700x500 mm
Daylight: 600 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1400 mm
Width: 900 mm
Height: 2200 mm
Weight: 1300 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachines
pressing capacity: 300 toStroke: 500 mmRam: 1000x500 mmTable: 1200x800 mmDaylight: 600 mmThroat depth: 400 mmRapid speed: 22 mm/sWorking speed: 2 mm/sMotor: 7.5 kWLength: 2300 mmWidth: 1500 mmHeight: 3100 mmWeight: 11200 kg
pressing capacity: 300 to
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Stroke: 500 mm
Ram: 1000x500 mm
Table: 1200x800 mm
Daylight: 600 mm
Throat depth: 400 mm
Rapid speed: 22 mm/s
Working speed: 2 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3100 mm
Weight: 11200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachines
pressing capacity: 200 toStroke: 500 mmRam: 870x500 mmTable: 1000x600 mmDaylight: 500 mmThroat depth: 300 mmRapid speed: 21 mm/sWorking speed: 3 mm/sMotor: 7.5 kWLength: 2300 mmWidth: 1500 mmHeight: 3000 mmWeight: 8200 kg
pressing capacity: 200 to
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Stroke: 500 mm
Ram: 870x500 mm
Table: 1000x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 21 mm/s
Working speed: 3 mm/s
Motor: 7.5 kW
Length: 2300 mm
Width: 1500 mm
Height: 3000 mm
Weight: 8200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachines
pressing capacity: 150 toStroke: 500 mmRam: 800x400 mmTable: 900x600 mmDaylight: 500 mmThroat depth: 300 mmRapid speed: 20 mm/sWorking speed: 3 mm/sMotor: 4 kWLength: 2200 mmWidth: 1500 mmHeight: 3000 mmWeight: 5500 kg
pressing capacity: 150 to
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
4
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesKantpers
pressing capacity: 40 toBending length: 1550 mmAxes: X and Y axisStroke: 160 mmInside distance between side frames: 1260 mmGap in side frame: 320 mmDaylight: 380 mmPower concept: hydraulicrapid speed Y-axis: 90 mm/sWorking speed Y-axis: 10Back gauge travel X-axis: 500 mmTable height: 845 mmTable width: 100 mmOiltank: 120 lMotor power: 4 kWLength: 2000 mmWidth: 1600 mmHeight: 2235 mmWeight: 3450 kg
pressing capacity: 40 to
Bending length: 1550 mm
Axes: X and Y axis
Stroke: 160 mm
Inside distance between side frames: 1260 mm
Gap in side frame: 320 mm
Daylight: 380 mm
Power concept: hydraulic
rapid speed Y-axis: 90 mm/s
Working speed Y-axis: 10
Back gauge travel X-axis: 500 mm
Table height: 845 mm
Table width: 100 mm
Oiltank: 120 l
Motor power: 4 kW
Length: 2000 mm
Width: 1600 mm
Height: 2235 mm
Weight: 3450 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Bending length: 1550 mm
Axes: X and Y axis
Stroke: 160 mm
Inside distance between side frames: 1260 mm
Gap in side frame: 320 mm
Daylight: 380 mm
Power concept: hydraulic
rapid speed Y-axis: 90 mm/s
Working speed Y-axis: 10
Back gauge travel X-axis: 500 mm
Table height: 845 mm
Table width: 100 mm
Oiltank: 120 l
Motor power: 4 kW
Length: 2000 mm
Width: 1600 mm
Height: 2235 mm
Weight: 3450 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
4
Metaalbewerking en werktuigmachinesAccessoires en reserveonderdelen
Jaw opening: 150 mmjaw height: 40 mmOpening of upper beam: 200 mmWeight: 33 kg
Jaw opening: 150 mm
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
jaw height: 40 mm
Opening of upper beam: 200 mm
Weight: 33 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
9
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesPlaatscharen
Cutting length: 3100 mmMax. thickness - mild steel: 10 mmGap in side frame: 350 mmStrokes: 10 1/minCutting angle: 1.5 °Back gauge: 1000 mmMotor power: 22 kWLength: 3800 mmTotal width with support arm und protection fence: 3600 mmHeight: 2000 mmWeight: 9800 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 1.5 °
Back gauge: 1000 mm
Motor power: 22 kW
Length: 3800 mm
Total width with support arm und protection fence: 3600 mm
Height: 2000 mm
Weight: 9800 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Max. thickness - mild steel: 10 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 1.5 °
Back gauge: 1000 mm
Motor power: 22 kW
Length: 3800 mm
Total width with support arm und protection fence: 3600 mm
Height: 2000 mm
Weight: 9800 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
3
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesVoer stijltangen
Coil weight: 500 kgCoil outer diameter: 1200 mmMin. coil inner diameter: 400 mmMax. Coil inner diameter: 550Max. coil width: 300 mmMin. coil width for version with pneumatic downholder: 80 mmLength: 1450 mmWidth: 1200 mmHeight: 1640 mmWeight: 260 kg
Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1450 mm
Width: 1200 mm
Height: 1640 mm
Weight: 260 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1450 mm
Width: 1200 mm
Height: 1640 mm
Weight: 260 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesPonsen
Punching power: 55 tonThroat depth: 750 mmMax. diameter at sheet thickness (mild steel): 40x14 mmMax. number of strokes at 20 mm stroke: 37 1/minMotor: 5 kWLength: 1930 mmWidth: 1200 mmHeight: 1800 mmWeight: 1885 kg
Punching power: 55 ton
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1930 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1885 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1930 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1885 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
3
Metaalbewerking en werktuigmachinesAccessoires en reserveonderdelen
Length: 2010 mmWidth: 680 mmHeight: 880 mmWeight: 150 kg
Length: 2010 mm
Width: 680 mm
Height: 880 mm
Weight: 150 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Width: 680 mm
Height: 880 mm
Weight: 150 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesSnijmachines en uitrustingLasersnijmachines
Laser power: 3 kWManual table / shuttle table: Shuttle tableMax. thickness - mild steel: 16 mmMax. thickness - stainless steel: 8 mmMax. thickness - aluminium: 8 mmMax. Application Range - Copper: 5 mmMax. Application Range - Brass: 8 mmTotal power: 26,4 (mit Absaugung) kWCutting area: 3100 x 1525 mmX-axis: 3100 mmY-axis: 1525 mmZ-Axis: 125 mmMax. Sheet size: 3084 x 1524 mmMax. sheet weight: 240 (für 3 - 12 kW) / 400 (für 15 - 20kW) kg/m²Max. total weight for double table: 2200 (für 3 - 12kW) / 3600 (für 15 - 20kW) kgMax speed x-axes: 100 m/minMax speed y-axes: 100 m/minMax. speed simultaneous: 141 m/minMax. acceleration: 14 m/s²Positioning accuracy: +/- 0,05 mmRepeat accuracy: +/- 0,05 mmTable change time: 25 s
Laser power: 3 kW
Manual table / shuttle table: Shuttle table
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 8 mm
Max. thickness - aluminium: 8 mm
Max. Application Range - Copper: 5 mm
Max. Application Range - Brass: 8 mm
Total power: 26,4 (mit Absaugung) kW
Cutting area: 3100 x 1525 mm
X-axis: 3100 mm
Y-axis: 1525 mm
Z-Axis: 125 mm
Max. Sheet size: 3084 x 1524 mm
Max. sheet weight: 240 (für 3 - 12 kW) / 400 (für 15 - 20kW) kg/m²
Max. total weight for double table: 2200 (für 3 - 12kW) / 3600 (für 15 - 20kW) kg
Max speed x-axes: 100 m/min
Max speed y-axes: 100 m/min
Max. speed simultaneous: 141 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0,05 mm
Repeat accuracy: +/- 0,05 mm
Table change time: 25 s
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Manual table / shuttle table: Shuttle table
Max. thickness - mild steel: 16 mm
Max. thickness - stainless steel: 8 mm
Max. thickness - aluminium: 8 mm
Max. Application Range - Copper: 5 mm
Max. Application Range - Brass: 8 mm
Total power: 26,4 (mit Absaugung) kW
Cutting area: 3100 x 1525 mm
X-axis: 3100 mm
Y-axis: 1525 mm
Z-Axis: 125 mm
Max. Sheet size: 3084 x 1524 mm
Max. sheet weight: 240 (für 3 - 12 kW) / 400 (für 15 - 20kW) kg/m²
Max. total weight for double table: 2200 (für 3 - 12kW) / 3600 (für 15 - 20kW) kg
Max speed x-axes: 100 m/min
Max speed y-axes: 100 m/min
Max. speed simultaneous: 141 m/min
Max. acceleration: 14 m/s²
Positioning accuracy: +/- 0,05 mm
Repeat accuracy: +/- 0,05 mm
Table change time: 25 s
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
_thumb.jpeg "Toon advertentie")
15
DrukmachinesVerdere verwerkingsmachines Collatoren
MKW 30 UT/20GS/AW/HVYear 80/200020 stations collating machineComplete with stitching unit type 50/SFT3502 x Hohner 52-8 stitching heads.and Jogger
MKW 30 UT/20GS/AW/HV
Year 80/2000
20 stations collating machine
Complete with stitching unit type 50/SFT350
2 x Hohner 52-8 stitching heads.
and Jogger
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Year 80/2000
20 stations collating machine
Complete with stitching unit type 50/SFT350
2 x Hohner 52-8 stitching heads.
and Jogger
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
 -1_thumb.jpeg "Toon advertentie")
 -2_thumb.jpeg "Toon advertentie")
 -3_thumb.jpeg "Toon advertentie")
 -4_thumb.jpeg "Toon advertentie")
 -5_thumb.jpeg "Toon advertentie")
 -6 _thumb.jpg "Toon advertentie")
7
DrukmachinesStackers
Polar Mohr LW 1000-4 Paper Stack LiftIn very good condition.Automatic hight adjustment controlled by a photocell or manual mode,.Load capacity: 1000 kg.Pallet dimensions: 1200 x 800
Polar Mohr LW 1000-4 Paper Stack Lift
In very good condition.
Automatic hight adjustment controlled by a photocell or manual mode,.
Load capacity: 1000 kg.
Pallet dimensions: 1200 x 800
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
In very good condition.
Automatic hight adjustment controlled by a photocell or manual mode,.
Load capacity: 1000 kg.
Pallet dimensions: 1200 x 800
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
6
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesBuigmachines
Shaft diameter: 50Upper roll diameter: 152 mmLower roll diameter: 162 mmDriven rolls: 3Motor power: 1.1 kWSpeed: 4 m/minFlat steel vertical position (section / min. diameter): 60x10 mm / 600 mm, 20x10 mm / 300 mmFlat steel horizontal position (section / min. diameter): 100x15 mm / 600 mm, 50 x 10 mm / 300 mmSquare bar (section / min. diameter): 35x35 mm / 600 mm, 15x15 mm / 300 mmRound bar (section / min. diameter): 35 mm / 600 mm, Dm. 20 mm / 300 mmTube (section / min. diameter): 70x2 mm / 1200 mm, Dm. 25x1,5 mm / 400 mm, 2"x2,9 mm / 1000 mm, 1/2"x2,3 mm / 350 mmForm tube vertical position (Querschnitt / min. Durchmesser): 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mmForm tube square (section / min. diameter): 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mmAngle leg outside (Querschnitt / min. Durchmesser): 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mmAngle leg inside (section / min. diameter): 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mmLength: 810 mmWidth: 950 mmHeight: 1500 mmWeight: 500 kg
Shaft diameter: 50
Upper roll diameter: 152 mm
Lower roll diameter: 162 mm
Driven rolls: 3
Motor power: 1.1 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 600 mm, 20x10 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 600 mm, 50 x 10 mm / 300 mm
Square bar (section / min. diameter): 35x35 mm / 600 mm, 15x15 mm / 300 mm
Round bar (section / min. diameter): 35 mm / 600 mm, Dm. 20 mm / 300 mm
Tube (section / min. diameter): 70x2 mm / 1200 mm, Dm. 25x1,5 mm / 400 mm, 2"x2,9 mm / 1000 mm, 1/2"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mm
Length: 810 mm
Width: 950 mm
Height: 1500 mm
Weight: 500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Upper roll diameter: 152 mm
Lower roll diameter: 162 mm
Driven rolls: 3
Motor power: 1.1 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 600 mm, 20x10 mm / 300 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 600 mm, 50 x 10 mm / 300 mm
Square bar (section / min. diameter): 35x35 mm / 600 mm, 15x15 mm / 300 mm
Round bar (section / min. diameter): 35 mm / 600 mm, Dm. 20 mm / 300 mm
Tube (section / min. diameter): 70x2 mm / 1200 mm, Dm. 25x1,5 mm / 400 mm, 2"x2,9 mm / 1000 mm, 1/2"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x3 mm / 1500 mm, 30x15x2 mm / 400 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1600 mm, 20x20x2 mm / 400 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x6 mm / 600 mm, 30x30x3 mm / 400 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 900 mm, 30x30x3 mm / 600 mm
Length: 810 mm
Width: 950 mm
Height: 1500 mm
Weight: 500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
7
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesZwenkbuigmachines
Bending length: 6200 mmBending capacity steel 400 N/mm²: 1.5 mmBending capacity Alu 190 N/mm²: 2 mmNo. of stand and tension arm units: 7No. of driven linkage assemblies: 7Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 4 kWLength with hand shear: 6730 mmLength with electrical shear: 7380 mmWidth: 1435 mmHeight: 1460 mmWeight: 3800 kg
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 4 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3800 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 4 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3800 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
7
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesZwenkbuigmachines
Bending length: 6200 mmBending capacity steel 400 N/mm²: 1.25 mmBending capacity Alu 190 N/mm²: 2 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 6730 mmLength with electrical shear: 7380 mmWidth: 1435 mmHeight: 1460 mmWeight: 3200 kg
Bending length: 6200 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 6730 mm
Length with electrical shear: 7380 mm
Width: 1435 mm
Height: 1460 mm
Weight: 3200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
7
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesZwenkbuigmachines
Bending length: 4010 mmBending capacity steel 400 N/mm²: 1.5 mmBending capacity Alu 190 N/mm²: 2 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2900 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
4
Metaalbewerking en werktuigmachinesPersenExcentrische persen
pressing capacity: 200 toTonnage rating point: 7 mmTable length: 1350 mmTable width: 800 mmHole in table: 250 mmStroke: 18 - 180 mmStrokes: 35 - 50 1/minRam: 900x570 mmRam guides: 8Ram adjustment: 110 mmThroat depth: 410 mmDistance between columns: 820 mmMotor: 22 kWLength: 1500 mmWidth: 2633 mmHeight: 3950 mmWeight: 20000 kg
pressing capacity: 200 to
Tonnage rating point: 7 mm
Table length: 1350 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 18 - 180 mm
Strokes: 35 - 50 1/min
Ram: 900x570 mm
Ram guides: 8
Ram adjustment: 110 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 22 kW
Length: 1500 mm
Width: 2633 mm
Height: 3950 mm
Weight: 20000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Tonnage rating point: 7 mm
Table length: 1350 mm
Table width: 800 mm
Hole in table: 250 mm
Stroke: 18 - 180 mm
Strokes: 35 - 50 1/min
Ram: 900x570 mm
Ram guides: 8
Ram adjustment: 110 mm
Throat depth: 410 mm
Distance between columns: 820 mm
Motor: 22 kW
Length: 1500 mm
Width: 2633 mm
Height: 3950 mm
Weight: 20000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
4
Metaalbewerking en werktuigmachinesPersenExcentrische persen
pressing capacity: 160 toTonnage rating point: 6 mmTable length: 1200 mmTable width: 650 mmHole in table: 200 mmStroke: 16 - 160 mmStrokes: 35 - 55 1/minRam: 740x420 mmRam guides: 8Ram adjustment: 100 mmThroat depth: 330 mmDistance between columns: 690 mmMotor: 15 kWLength: 1410 mmWidth: 2220 mmHeight: 3544 mmWeight: 16000 kg
pressing capacity: 160 to
Tonnage rating point: 6 mm
Table length: 1200 mm
Table width: 650 mm
Hole in table: 200 mm
Stroke: 16 - 160 mm
Strokes: 35 - 55 1/min
Ram: 740x420 mm
Ram guides: 8
Ram adjustment: 100 mm
Throat depth: 330 mm
Distance between columns: 690 mm
Motor: 15 kW
Length: 1410 mm
Width: 2220 mm
Height: 3544 mm
Weight: 16000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Tonnage rating point: 6 mm
Table length: 1200 mm
Table width: 650 mm
Hole in table: 200 mm
Stroke: 16 - 160 mm
Strokes: 35 - 55 1/min
Ram: 740x420 mm
Ram guides: 8
Ram adjustment: 100 mm
Throat depth: 330 mm
Distance between columns: 690 mm
Motor: 15 kW
Length: 1410 mm
Width: 2220 mm
Height: 3544 mm
Weight: 16000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
4
Metaalbewerking en werktuigmachinesPersenExcentrische persen
pressing capacity: 125 toTonnage rating point: 5.5 mmTable length: 1100 mmTable width: 630 mmHole in table: 180 mmStroke: 15 - 150 mmStrokes: 42 - 65 1/minRam: 700x400 mmRam guides: 8Ram adjustment: 90 mmThroat depth: 320 mmDistance between columns: 610 mmMotor: 15 kWLength: 1400 mmWidth: 2200 mmHeight: 3120 mmWeight: 12500 kg
pressing capacity: 125 to
Tonnage rating point: 5.5 mm
Table length: 1100 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 150 mm
Strokes: 42 - 65 1/min
Ram: 700x400 mm
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 610 mm
Motor: 15 kW
Length: 1400 mm
Width: 2200 mm
Height: 3120 mm
Weight: 12500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Tonnage rating point: 5.5 mm
Table length: 1100 mm
Table width: 630 mm
Hole in table: 180 mm
Stroke: 15 - 150 mm
Strokes: 42 - 65 1/min
Ram: 700x400 mm
Ram guides: 8
Ram adjustment: 90 mm
Throat depth: 320 mm
Distance between columns: 610 mm
Motor: 15 kW
Length: 1400 mm
Width: 2200 mm
Height: 3120 mm
Weight: 12500 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesPersenExcentrische persen
pressing capacity: 200 toTable length: 1200 mmTable width: 740 mmHole in table: 220 mmStroke: 24 - 140 mmStrokes: 50 1/minRam: 950x600 mmRam adjustment: 100 mmThroat depth: 390 mmMotor: 15 kWLength: 2350 mmWidth: 1700 mmHeight: 3435 mmWeight: 14900 kg
pressing capacity: 200 to
Table length: 1200 mm
Table width: 740 mm
Hole in table: 220 mm
Stroke: 24 - 140 mm
Strokes: 50 1/min
Ram: 950x600 mm
Ram adjustment: 100 mm
Throat depth: 390 mm
Motor: 15 kW
Length: 2350 mm
Width: 1700 mm
Height: 3435 mm
Weight: 14900 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Table length: 1200 mm
Table width: 740 mm
Hole in table: 220 mm
Stroke: 24 - 140 mm
Strokes: 50 1/min
Ram: 950x600 mm
Ram adjustment: 100 mm
Throat depth: 390 mm
Motor: 15 kW
Length: 2350 mm
Width: 1700 mm
Height: 3435 mm
Weight: 14900 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
4
Metaalbewerking en werktuigmachinesPersenExcentrische persen
pressing capacity: 160 toTable length: 1100 mmTable width: 700 mmHole in table: 210 mmStroke: 23 - 110 mmStrokes: 60 1/minRam: 630x400 mmRam guides: 8Ram adjustment: 95 mmRam hole: 65 mmThroat depth: 325 mmDaylight: 480 mmLength: 2400 mmWidth: 1430 mmHeight: 3200 mmWeight: 9950 kg
pressing capacity: 160 to
Table length: 1100 mm
Table width: 700 mm
Hole in table: 210 mm
Stroke: 23 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram guides: 8
Ram adjustment: 95 mm
Ram hole: 65 mm
Throat depth: 325 mm
Daylight: 480 mm
Length: 2400 mm
Width: 1430 mm
Height: 3200 mm
Weight: 9950 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Table length: 1100 mm
Table width: 700 mm
Hole in table: 210 mm
Stroke: 23 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram guides: 8
Ram adjustment: 95 mm
Ram hole: 65 mm
Throat depth: 325 mm
Daylight: 480 mm
Length: 2400 mm
Width: 1430 mm
Height: 3200 mm
Weight: 9950 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesPersenExcentrische persen
pressing capacity: 130 toTable length: 1000 mmTable width: 640 mmHole in table: 210 mmStroke: 5 - 110 mmStrokes: 60 1/minRam: 630x400 mmRam adjustment: 90 mmThroat depth: 330 mmMotor: 11 kWLength: 2200 mmWidth: 1372 mmHeight: 3000 mmWeight: 8200 kg
pressing capacity: 130 to
Table length: 1000 mm
Table width: 640 mm
Hole in table: 210 mm
Stroke: 5 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 90 mm
Throat depth: 330 mm
Motor: 11 kW
Length: 2200 mm
Width: 1372 mm
Height: 3000 mm
Weight: 8200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Table length: 1000 mm
Table width: 640 mm
Hole in table: 210 mm
Stroke: 5 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 90 mm
Throat depth: 330 mm
Motor: 11 kW
Length: 2200 mm
Width: 1372 mm
Height: 3000 mm
Weight: 8200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesKnabbelmachines
Punching power: 30 tonWorking area: 3000x1500 mmX-axis movement (+repositioning): 3000 mmY-axis movement: 1500 mmspeed of X-axis: 70 m/Minspeed of Y-axis: 60 m/minspeed combined X+Y: 120 m/minStroke: 40 mmMax. strokes (in 1 mm steps, 1 mm thickness): 1200 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 325 1/minMax. strokes at marking: 2800 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 28Positioning accuracy: 0.1 mmRepeat accuracy: 0.05 mmTurret rotation speed: 22 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 200 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 7.5 kWOiltank: 180 lLength without light barrier: 6650 mmLength with light barrier: 7650 mmWidth without light barrier: 6300 mmWidth with light barrier: 8300 mmHeight: 2310 mmWeight: 18250 kg
Punching power: 30 ton
Working area: 3000x1500 mm
X-axis movement (+repositioning): 3000 mm
Y-axis movement: 1500 mm
speed of X-axis: 70 m/Min
speed of Y-axis: 60 m/min
speed combined X+Y: 120 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 325 1/min
Max. strokes at marking: 2800 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 28
Positioning accuracy: 0.1 mm
Repeat accuracy: 0.05 mm
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 200 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Oiltank: 180 l
Length without light barrier: 6650 mm
Length with light barrier: 7650 mm
Width without light barrier: 6300 mm
Width with light barrier: 8300 mm
Height: 2310 mm
Weight: 18250 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Working area: 3000x1500 mm
X-axis movement (+repositioning): 3000 mm
Y-axis movement: 1500 mm
speed of X-axis: 70 m/Min
speed of Y-axis: 60 m/min
speed combined X+Y: 120 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 325 1/min
Max. strokes at marking: 2800 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 28
Positioning accuracy: 0.1 mm
Repeat accuracy: 0.05 mm
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 200 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Oiltank: 180 l
Length without light barrier: 6650 mm
Length with light barrier: 7650 mm
Width without light barrier: 6300 mm
Width with light barrier: 8300 mm
Height: 2310 mm
Weight: 18250 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesKnabbelmachines
Punching power: 30 tonWorking area: 2500x1250 mmX-axis movement (+repositioning): 2500 mmY-axis movement: 1250 mmspeed of X-axis: 116 m/Minspeed of Y-axis: 80 m/minspeed combined X+Y: 140 m/minStroke: 40 mmMax. strokes (in 1 mm steps, 1 mm thickness): 1200 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 425 1/minMax. strokes at marking: 3200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 22 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 120 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 15 kWLength without light barrier: 5750 mmLength with light barrier: 6800 mmWidth without light barrier: 5360 mmWidth with light barrier: 7360 mmHeight: 2310 mmWeight: 12960 kg
Punching power: 30 ton
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Height: 2310 mm
Weight: 12960 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Height: 2310 mm
Weight: 12960 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesKnabbelmachines
Punching power: 20 tonWorking area: 2000x1250 mmX-axis movement (+repositioning): 2000 mmY-axis movement: 1250 mmspeed of X-axis: 90 m/Minspeed of Y-axis: 70 m/minspeed combined X+Y: 114 m/minMax. strokes (in 1 mm steps, 1 mm thickness): 1100 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 375 1/minMax. strokes at marking: 1200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 30 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 100 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 7.5 kWLength without light barrier: 5600 mmLength with light barrier: 6600 mmWidth without light barrier: 4200 mmWidth with light barrier: 6200 mmHeight: 2310 mmWeight: 11000 kg
Punching power: 20 ton
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Height: 2310 mm
Weight: 11000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Height: 2310 mm
Weight: 11000 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
8
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesZwenkbuigmachines
Bending length: 2035 mmSheet thickness (420 N/mm²): 3.5 mmAntrieb: HydraulicMax. bending angle: 135 °Length: 3000 mmWidth: 1100 mmHeight: 1750 mmWeight: 2200 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3000 mm
Width: 1100 mm
Height: 1750 mm
Weight: 2200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
3
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesZwenkbuigmachines
Bending length: 2540 mmSheet thickness (420 N/mm²): 6.5 mmAntrieb: HydraulicMax. bending angle: 135 °Length: 3900 mmWidth: 1750 mmHeight: 2050 mmWeight: 6200 kg
Bending length: 2540 mm
Sheet thickness (420 N/mm²): 6.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3900 mm
Width: 1750 mm
Height: 2050 mm
Weight: 6200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Sheet thickness (420 N/mm²): 6.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3900 mm
Width: 1750 mm
Height: 2050 mm
Weight: 6200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
3
Metaalbewerking en werktuigmachinesPlaatbewerkingsmachinesZwenkbuigmachines
Bending length: 2035 mmSheet thickness (420 N/mm²): 4.5 mmAntrieb: HydraulicMax. bending angle: 135 °Length: 3300 mmWidth: 1550 mmHeight: 1900 mmWeight: 3200 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 4.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Sheet thickness (420 N/mm²): 4.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3270x27x0,9 mmBand speed: 35/70 (PLC) m/minBand speed continous: 20-100 (CNC/Touch) m/minCutting capacity 0° round: 300 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 420x200 mmCutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mmCutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mmMin. rest piece length: 220 mmWorking height: 835 mmHydraulic motor: 0.37 kWCoolant pump motor: 0.12 kWLength: 3220 mmWidth: 2050 mmHeight: 1900 mmWeight: 1090 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 3220 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 3220 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3270x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 300 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 420x200 mmCutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mmCutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mmWorking height: 830 mmLength: 1650 mmWidth: 1200 mmHeight: 1900 mmWeight: 400 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Working height: 830 mm
Length: 1650 mm
Width: 1200 mm
Height: 1900 mm
Weight: 400 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Working height: 830 mm
Length: 1650 mm
Width: 1200 mm
Height: 1900 mm
Weight: 400 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3270x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 300 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 420x200 mmCutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mmCutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mmWorking height: 830 mmLength: 1600 mmWidth: 1400 mmHeight: 1950 mmWeight: 356 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Working height: 830 mm
Length: 1600 mm
Width: 1400 mm
Height: 1950 mm
Weight: 356 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Working height: 830 mm
Length: 1600 mm
Width: 1400 mm
Height: 1950 mm
Weight: 356 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3270x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 420x200 mmCutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mmCutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mmCutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1600 mmHeight: 1800 mmWeight: 488 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1600 mm
Height: 1800 mm
Weight: 488 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1600 mm
Height: 1800 mm
Weight: 488 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3270x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 420x200 mmCutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mmCutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mmCutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1400 mmHeight: 1800 mmWeight: 438 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1400 mm
Height: 1800 mm
Weight: 438 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1400 mm
Height: 1800 mm
Weight: 438 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3120x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 350x140 mmCutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mmCutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mmCutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1550 mmHeight: 1750 mmWeight: 460 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3120 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 350x140 mmCutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mmCutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mmCutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mmWorking height: 830 mmLength: 1550 mmWidth: 1400 mmHeight: 1750 mmWeight: 420 kg
Saw frame: Pivot frame
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3120x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 370x140 mmCutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mmCutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mmWorking height: 830 mmLength: 1650 mmWidth: 1200 mmHeight: 1850 mmWeight: 390 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 370x140 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Working height: 830 mm
Length: 1650 mm
Width: 1200 mm
Height: 1850 mm
Weight: 390 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 370x140 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Working height: 830 mm
Length: 1650 mm
Width: 1200 mm
Height: 1850 mm
Weight: 390 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
4
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3010x27x0,9 mmBand speed: 35/70 (PLC) m/minBand speed continous: 20-100 (CNC/Touch) m/minCutting capacity 0° round: 260 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 330x120 mmCutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mmCutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mmMin. rest piece length: 220 mmWorking height: 835 mmHydraulic motor: 0.37 kWCoolant pump motor: 0.12 kWLength: 2800 mmWidth: 2050 mmHeight: 1900 mmWeight: 1090 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
1
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3010x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 260 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 330x120 mmCutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mmCutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1200 mmHeight: 1800 mmWeight: 390 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1200 mm
Height: 1800 mm
Weight: 390 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1200 mm
Height: 1800 mm
Weight: 390 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
2
Metaalbewerking en werktuigmachinesZagenLintzagen
Saw frame: Pivot frameBand dimensions: 3010x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 260 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 330x120 mmCutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mmCutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mmWorking height: 830 mmLength: 1500 mmWidth: 1400 mmHeight: 1850 mmWeight: 345 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1500 mm
Width: 1400 mm
Height: 1850 mm
Weight: 345 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1500 mm
Width: 1400 mm
Height: 1850 mm
Weight: 345 kg
De advertentie werd automatisch vertaald en er kunnen enkele vertaalfouten zijn opgetreden.