Used ARBURG 270 C 500-100 RUNHOUR Only 100
ARBURG 270 C 500-100 RUNHOUR Only 100
13
Dane dotyczące ogłoszeń
Numer referencyjny
17540
Opis maszyny
Used ARBURG 270 C 500-100 RUNHOUR Only 100
Producent
ARBURG
typ
270 C 500-100 RUNHOUR Only 100
Rok produkcji
1994
Stan
używany
Lokalizacja ogłoszenia
Schmiedestraße 3, 45527 Hattingen, Germany
Opis
Ref. no.: 17540
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
Further information:
Laboratory Machine with Exceptionally Low Operating Hours
The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.
The control system shows only approximately 100 operating hours and just 867 machine cycles.
The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.
The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.
Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Te ogłoszenia mogą Cię również zainteresować
12
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18597Hersteller: ENGELYear of construction: 2007Clamping unitClamping force: 70 tonOpening stroke: 305 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2381 barMeasurements and weightDimensions: 4,0 x 1,8 x 2,5 mMachine weight: 5600 kgFurther information:The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.The ENGEL INSERT series is particularly suitable for:* insert molding applications* metal/plastic combination parts* electronic component production* connector and cable technology* technical plastic parts* precision industrial productsWith its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
Ref. no.: 18597
Hersteller: ENGEL
Year of construction: 2007
Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar
Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg
Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.
One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.
Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.
The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.
The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.
The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.
The ENGEL INSERT series is particularly suitable for:
* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products
With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: ENGEL
Year of construction: 2007
Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar
Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg
Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.
One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.
Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.
The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.
The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.
The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.
The ENGEL INSERT series is particularly suitable for:
* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products
With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18643Hersteller: ARBURGYear of construction: 2008Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 470 x 470 mmMould height min.: 250 mmOpening width: 750 mmInjection unitScrew diameter: 35 mmInjection volume: 154 cm³Shot weight: 141 gInjection pressure: 2500 barMeasurements and weightMachine weight: 4850 kgDimensions LxWxH part 1: 4,6 x 1,6 x 2,1 mAdditional information & extrasCore pull: 1 pcsFurther information:Communication card for ProSeS interface is available (OPC-UA).Robot interface is available (EUROMAP 67).
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18565Hersteller: DEMAGYear of construction: 2005Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 500 x 500 mmMould height min.: 250 mmOpening width: 750 mmPlaten size (h x v): 750 x 750 mmInjection unitScrew diameter: 45 mmInjection volume: 323 cm³Shot weight: 290 gInjection pressure: 1973 barMeasurements and weightDimensions: 5.45 x 1.63 x 2.1 mMachine weight: 7500 kgRobotProducer: Wittmann Type: W721-0231 Year: 2005
Ref. no.: 18565
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18591Hersteller: ARBURGYear of construction: 2005Clamping unitClamping force: 160 tonOpening stroke: 450 mmDistance between tie bars: 520 x 520 mmMould height min.: 250 mmMould height max.: 550 mmOpening width: 700 mmPlaten size (h x v): 695 x 695 mmInjection unitScrew diameter: 45 mmInjection volume: 254 cm³Shot weight: 232 gInjection pressure: 1580 barMeasurements and weightMachine weight: 7100 kgDimensions LxWxH part 1: 5,1 x 1,7 x 2,3 mFurther information:The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.Typical features of this series include:* Fully electric drive for all main movements* High energy efficiency compared to hydraulic machines* Excellent injection and positioning accuracy* Quiet and clean operation (also suitable for medical applications)* Low maintenance requirementsThe 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Ref. no.: 18591
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18494Hersteller: ENGELYear of construction: 2013Clamping unitClamping force: 50 tonOpening stroke: 400 mmMould height min.: 200 mmOpening width: 600 mmPlaten size (h x v): 500 X 450 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2400 barMeasurements and weightDimensions: 3,4 x 1,3 x 1,8 mMachine weight: 2900 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
12
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18587Hersteller: FERROMATIK MILACRONYear of construction: 2001Clamping unitClamping force: 200 tonOpening stroke: 750 mmDistance between tie bars: 560 x 560 mmMould height min.: 300 mmOpening width: 1050 mmPlaten size (h x v): 830 x 830 mmInjection unitScrew diameter: 50 mmInjection volume: 441 cm³Shot weight: 395 gInjection pressure: 2268 barMeasurements and weightDimensions: 6,9 x 2,0 x 2,6 mMachine weight: 13000 kgFurther information:FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall ProductionThe FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.The K-TEC series is especially preferred for:• Thin-wall packaging products• Technical parts with fine surface details• Lid and container production• High-flow applications• High-speed serial production processesAdvantages of the nitrogen-supported system:• Extremely fast injection performance• More stable pressure control• Better reproduction of fine details• Improved filling of thin-wall products• Shorter cycle times• High process stabilityThe K-TEC series is also known for:• High repeatability• Sensitive mould protection• Low cycle times• Long-lasting mechanical construction• Suitability for heavy industrial operating conditionsThe machine was actively running in production until it was removed from operation and was working without problems until the very end.Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 441 cm³
Shot weight: 395 g
Injection pressure: 2268 bar
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Further information:
FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production
The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.
One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.
The K-TEC series is especially preferred for:
• Thin-wall packaging products
• Technical parts with fine surface details
• Lid and container production
• High-flow applications
• High-speed serial production processes
Advantages of the nitrogen-supported system:
• Extremely fast injection performance
• More stable pressure control
• Better reproduction of fine details
• Improved filling of thin-wall products
• Shorter cycle times
• High process stability
The K-TEC series is also known for:
• High repeatability
• Sensitive mould protection
• Low cycle times
• Long-lasting mechanical construction
• Suitability for heavy industrial operating conditions
The machine was actively running in production until it was removed from operation and was working without problems until the very end.
Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 441 cm³
Shot weight: 395 g
Injection pressure: 2268 bar
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Further information:
FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production
The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.
One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.
The K-TEC series is especially preferred for:
• Thin-wall packaging products
• Technical parts with fine surface details
• Lid and container production
• High-flow applications
• High-speed serial production processes
Advantages of the nitrogen-supported system:
• Extremely fast injection performance
• More stable pressure control
• Better reproduction of fine details
• Improved filling of thin-wall products
• Shorter cycle times
• High process stability
The K-TEC series is also known for:
• High repeatability
• Sensitive mould protection
• Low cycle times
• Long-lasting mechanical construction
• Suitability for heavy industrial operating conditions
The machine was actively running in production until it was removed from operation and was working without problems until the very end.
Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18586Hersteller: KRAUSS MAFFEIYear of construction: 2011Clamping unitClamping force: 180 tonOpening stroke: 1050 mmDistance between tie bars: 560 × 510 mmMould height min.: 200 mmMould height max.: 600 mmPlaten size (h x v): 790 × 740 mmInjection unitScrew diameter: 50 mmInjection volume: 393 cm³Shot weight: 357 gInjection pressure: 1892 barMeasurements and weightDimensions: 6,07 x 1,92 x 2,01 mMachine weight: 6500 kgFurther information:👉Fully electric machine offering maximum precision, lowest energy consumption and highest process stabilityhis machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.Key features:* Solid and durable construction for long-term operation* High injection performance and process stability* Reliable KraussMaffei MC5 control system* Suitable for continuous industrial use* Good availability of spare partsThe machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
Ref. no.: 17147Hersteller: ENGELYear of construction: 2008Clamping unitClamping force: 400 tonOpening stroke: 1008 mmPlaten size (h x v): 1360 x 1460 mmInjection unitScrew diameter: 60 + 25 + 25+ 25+ 25 mmInjection volume: 608 + 54 + 54 + 54 + 54 cm³Shot weight: 547 + 48 + 48 + 48 + 48 gInjection pressure: 1725 + 1200 + 1200 + 1200 + 1200 barMeasurements and weightMachine weight: 22.000 + 6.600 kgDimensions LxWxH part 1: 5 x 2,3 x mDimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
12
Wtryskarki
Ref. no.: 17146Hersteller: ENGELYear of construction: 2004Clamping unitClamping force: 300 tonOpening stroke: 855 mmInjection unitScrew diameter: 50 + 25 mmInjection volume: 393 + 49 cm³Shot weight: 354 + 44 gInjection pressure: 1917 + 1586 barMeasurements and weightDimensions: 6,5 x 2,3 x mMachine weight: 21000 kg
Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18255Hersteller: ENGELYear of construction: 2004Clamping unitClamping force: 180 tonOpening stroke: 750 mmDistance between tie bars: 960 x830 mmMould height min.: 500 mmOpening width: 1250 mmInjection unitScrew diameter: 45 mmInjection volume: 318 cm³Shot weight: 302 gInjection pressure: 1769/2360 barMeasurements and weightMachine weight: 13500 kgRobotProducer: Wittman Type: W743 Year: 2009 Further information:ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less TechnologyThe ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility.Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system.⸻🔍 Advantages of the ENGEL Victory Series✔ Tie-Bar-Less DesignThe biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction.This system offers several important advantages:• Larger moulds can be installed easily• Easier access for complex mould geometries• Reduced mould changeover times• Easier robot integration• More efficient use of production spaceThis technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications.⸻✔ Wittmann Robot IntegrationThe machine has been operated together with a Wittmann robot.Robot specifications:• Wittmann W743-0424• Year of manufacture: 2009• Payload capacity: 25 kg• X-axis: 1200 mm• Y-axis: 1600 mm• Z-axis: 4000 mmThis configuration provides major advantages for automated production processes.⸻🔍 Machine Operating SystemThe ENGEL Victory Tech series operates with a servo-hydraulic system.✔ Hydraulic System:• Clamping unit• Injection movements• Ejector system• Mould movementsare driven by a high-performance hydraulic system.✔ Thanks to the servo-controlled hydraulic system:• Only the required amount of energy is consumed• Power consumption is significantly reduced• Quieter operation is achieved• Production stability is improvedUnlike older conventional hydraulic machines, the machine does not run continuously at full power.The servo pump system operates only when needed, providing the following advantages:• Lower energy costs• Reduced heat generation• Longer component lifetime• More stable processing conditions
Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar
Measurements and weight
Machine weight: 13500 kg
Robot
Producer: Wittman
Type: W743
Year: 2009
Further information:
ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology
The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility.
Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system.
⸻
🔍 Advantages of the ENGEL Victory Series
✔ Tie-Bar-Less Design
The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction.
This system offers several important advantages:
• Larger moulds can be installed easily
• Easier access for complex mould geometries
• Reduced mould changeover times
• Easier robot integration
• More efficient use of production space
This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications.
⸻
✔ Wittmann Robot Integration
The machine has been operated together with a Wittmann robot.
Robot specifications:
• Wittmann W743-0424
• Year of manufacture: 2009
• Payload capacity: 25 kg
• X-axis: 1200 mm
• Y-axis: 1600 mm
• Z-axis: 4000 mm
This configuration provides major advantages for automated production processes.
⸻
🔍 Machine Operating System
The ENGEL Victory Tech series operates with a servo-hydraulic system.
✔ Hydraulic System:
• Clamping unit
• Injection movements
• Ejector system
• Mould movements
are driven by a high-performance hydraulic system.
✔ Thanks to the servo-controlled hydraulic system:
• Only the required amount of energy is consumed
• Power consumption is significantly reduced
• Quieter operation is achieved
• Production stability is improved
Unlike older conventional hydraulic machines, the machine does not run continuously at full power.
The servo pump system operates only when needed, providing the following advantages:
• Lower energy costs
• Reduced heat generation
• Longer component lifetime
• More stable processing conditions
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar
Measurements and weight
Machine weight: 13500 kg
Robot
Producer: Wittman
Type: W743
Year: 2009
Further information:
ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology
The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility.
Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system.
⸻
🔍 Advantages of the ENGEL Victory Series
✔ Tie-Bar-Less Design
The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction.
This system offers several important advantages:
• Larger moulds can be installed easily
• Easier access for complex mould geometries
• Reduced mould changeover times
• Easier robot integration
• More efficient use of production space
This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications.
⸻
✔ Wittmann Robot Integration
The machine has been operated together with a Wittmann robot.
Robot specifications:
• Wittmann W743-0424
• Year of manufacture: 2009
• Payload capacity: 25 kg
• X-axis: 1200 mm
• Y-axis: 1600 mm
• Z-axis: 4000 mm
This configuration provides major advantages for automated production processes.
⸻
🔍 Machine Operating System
The ENGEL Victory Tech series operates with a servo-hydraulic system.
✔ Hydraulic System:
• Clamping unit
• Injection movements
• Ejector system
• Mould movements
are driven by a high-performance hydraulic system.
✔ Thanks to the servo-controlled hydraulic system:
• Only the required amount of energy is consumed
• Power consumption is significantly reduced
• Quieter operation is achieved
• Production stability is improved
Unlike older conventional hydraulic machines, the machine does not run continuously at full power.
The servo pump system operates only when needed, providing the following advantages:
• Lower energy costs
• Reduced heat generation
• Longer component lifetime
• More stable processing conditions
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
11
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18142Producer: DEMAGYear of construction: 1997Clamping unitClamping force: 50 tonOpening stroke: 400 mmDistance between tie bars: 355 x 355 mmMould height min.: 210 mmPlaten size (h x v): 540 x 540 mmInjection unitScrew diameter: 35 mmInjection volume: 106 cm³Shot weight: 95 gInjection pressure: 2573 barMeasurements and weightDimensions: 3,65 x 1,15 x 1,18 mMachine weight: 3600-2500 kg
Ref. no.: 18142
Producer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Producer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
WtryskarkiWtryskarki wielokomponentowe
Ref. no.: 18092Manufacturer: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 24780 kgFurther information:ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding MachineThis machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout.Motor and Hydraulic SystemThe machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other.Operating PrincipleThe two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle.ApplicationsAutomotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.
Ref. no.: 18092
Manufacturer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Further information:
ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine
This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout.
Motor and Hydraulic System
The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other.
Operating Principle
The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle.
Applications
Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 24780 kg
Further information:
ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine
This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout.
Motor and Hydraulic System
The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other.
Operating Principle
The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle.
Applications
Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
11
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 17507Producer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg
Ref. no.: 17507
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
WtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 16369Hersteller: BATTENFELDYear of construction: 2005Clamping unitClamping force: 75 tonOpening stroke: 800 mmDistance between tie bars: 405 x 405 mmMould height min.: 150 mmMould height max.: 480 mmInjection unitScrew diameter: 18 mmInjection volume: 30 cm³Shot weight: 27 gInjection pressure: 2440 barMeasurements and weightDimensions: 4,5 x 1,7 x 2,0 mMachine weight: 4500 kgFurther information:BATTENFELD EM 75/120 UNILOG B4All-Electric Precision Injection Moulding MachineThe BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.All major machine movements are driven by modern servo motors, providing:* very low energy consumption* high repeatability and precision* smooth and quiet machine operation* low maintenance requirements* stable and accurate production performanceThe machine is especially suitable for:* technical plastic components* electronic parts* precision moulded products* small and medium-sized production runsCompared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:* user-friendly operation* precise process control* stable cycle times* accurate servo axis managementThe machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:* a clean electrical cabinet* well-maintained mechanical components* properly kept servo-electric units* a clean injection unitThe BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
