7
Maszyny drukarskieMaszyny do druku wtórnegoMaszyny do laminowania
Magazyn A134R-R5PS6M / 1650 x 2050P Maszyna do laminowania
Maszyna do laminowania arkuszy na tekturę do produkcji wyświetlaczy i materiałów opakowaniowych
Magazyn A134R-R5PS6M / 1650 x 2050P Maszyna do laminowania
Maszyna do laminowania arkuszy na tekturę do produkcji wyświetlaczy i materiałów opakowaniowych
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Maszyna do laminowania arkuszy na tekturę do produkcji wyświetlaczy i materiałów opakowaniowych
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
8
Maszyny drukarskieMaszyny do druku wtórnegoMaszyny do laminowania
Maszyna do laminowania Sallmetal
S1050
Maksymalny rozmiar laminowania: 105 cm
Maszyna do laminowania Sallmetal
S1050
Maksymalny rozmiar laminowania: 105 cm
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
S1050
Maksymalny rozmiar laminowania: 105 cm
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
_thumb.jpg "Pokaż ogłoszenie")
_thumb.jpg "Pokaż ogłoszenie")
10
Maszyny drukarskieMaszyny do druku wtórnegoMaszyny do laminowania
Stock LM 123 A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).Squeeze roller that presses the labelled sheets and blanks together.Integrated sensor for detecting and registering the glued labelLabel registering unit for placing and applying the corrugated blank to the glued labelManual feeding of the corrugated blank or box pressure rollerTake-off table for the manual take-off of the labeled sheets / blanks.Integrated sheet counter.Siemens PLC control.Suction belt
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
Maszyny drukarskieMaszyny do druku wtórnegoMaszyny do laminowania
Paperplast International Dry 40
Format: 76x102
Składający się z:
Podajnik arkuszy
Kalander
Układarka separatora
Grzejnik offline
Paperplast International Dry 40
Format: 76x102
Składający się z:
Podajnik arkuszy
Kalander
Układarka separatora
Grzejnik offline
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Format: 76x102
Składający się z:
Podajnik arkuszy
Kalander
Układarka separatora
Grzejnik offline
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.