Полуавтоматический точечный и полнолистовой ламина
Stock LM 123
.jpg "Показывать рекламу")
.jpg "Показывать рекламу")
10
Данные о рекламе
Обозначение техники
Полуавтоматический точечный и полнолистовой ламина
Производитель
Stock
Тип
LM 123
Год выпуска
1999
Состояние
Б/У
Место размещения рекламы
Nijverheidsstraat 7 B, 5531AA Bladel, Netherlands
Описание
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Эти рекламные объявления также могут вас заинтересовать
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
15
Оборудование для постпечатной обработкиКоллаторы
MKW 30 UT/20GS/AW/HVYear 80/200020 stations collating machineComplete with stitching unit type 50/SFT3502 x Hohner 52-8 stitching heads.and Jogger
MKW 30 UT/20GS/AW/HV
Year 80/2000
20 stations collating machine
Complete with stitching unit type 50/SFT350
2 x Hohner 52-8 stitching heads.
and Jogger
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Year 80/2000
20 stations collating machine
Complete with stitching unit type 50/SFT350
2 x Hohner 52-8 stitching heads.
and Jogger
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
 Nijmegen_thumb.jpg "Показывать рекламу")
 -6 _thumb.jpg "Показывать рекламу")
2
Оборудование для постпечатной обработкиПодъемники для стопок бумаги
Polar LW 1000-4 Stack LiftYear: 2001Platform 80 × 126 mm.The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.It can also be used for stacking the cut material.No floor anchoring is required, so the unit is easy to relocate.Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.The control panel can be mounted on either the right or left side.
Polar LW 1000-4 Stack Lift
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Year: 2001
Platform 80 × 126 mm.
The lift automatically raises the material to an ergonomic working height, allowing the operator to easily load it into the jogger or directly into the cutting machine.
It can also be used for stacking the cut material.
No floor anchoring is required, so the unit is easy to relocate.
Equipped with continuously adjustable reflex light barriers for automatic lifting and lowering.
The control panel can be mounted on either the right or left side.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
-6._thumb.jpeg "Показывать рекламу")
10
Оборудование для постпечатной обработкиПереплетные машины
ang 470 PLC Ring Binder & Lever arch Assembly LineHigh-performance automatic production line for ring bindersBrand: HangYear: 2007Model: 470 PLC – FANUC ControlledThis fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.Main Components:Sheet feeder (Saug-Anleger)Creasing stationGripping hole punching unit (Griffloch-Ösmaschine)Double riveting stationOperator control panel (Fanuc QuickPanel View)Mechanic feeding unitSingle riveting stationFolding stationTechnical SpecificationsPLC Control: FANUC with memory for up to 1000 programs and modem for remote supportSetup time: Approx. 2-3 minutesMaterial Range:Cover height: 120 – 400 mmCover width: 300 – 820 mmMaterial thickness: Min. 1 mm – Max. 3.5 mmRivet spacing: 90 – 300 mmMachine Condition- In excellent working condition-Touch panel with program counter, total counter and production statistics- Fanuc QuickPanel View display- Ready for immediate production- Available for inspection in our warehouseProduction Counter Information (Machine Usage)Day Counter: 250,895 cyclesTotal Counter: 9,495,162 cyclesProduct Counter: 1,336,482 unitsOperating Time: 12,838 hours
ang 470 PLC Ring Binder & Lever arch Assembly Line
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
High-performance automatic production line for ring binders
Brand: Hang
Year: 2007
Model: 470 PLC – FANUC Controlled
This fully automatic line is designed for efficient production of ring binders according to customer specifications. The machine is equipped with multiple processing stations and a Fanuc PLC control with touchscreen interface.
Main Components:
Sheet feeder (Saug-Anleger)
Creasing station
Gripping hole punching unit (Griffloch-Ösmaschine)
Double riveting station
Operator control panel (Fanuc QuickPanel View)
Mechanic feeding unit
Single riveting station
Folding station
Technical Specifications
PLC Control: FANUC with memory for up to 1000 programs and modem for remote support
Setup time: Approx. 2-3 minutes
Material Range:
Cover height: 120 – 400 mm
Cover width: 300 – 820 mm
Material thickness: Min. 1 mm – Max. 3.5 mm
Rivet spacing: 90 – 300 mm
Machine Condition
- In excellent working condition
-Touch panel with program counter, total counter and production statistics
- Fanuc QuickPanel View display
- Ready for immediate production
- Available for inspection in our warehouse
Production Counter Information (Machine Usage)
Day Counter: 250,895 cycles
Total Counter: 9,495,162 cycles
Product Counter: 1,336,482 units
Operating Time: 12,838 hours
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Оборудование для постпечатной обработкиАксессуары и запчасти
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
 Grey cilinder-1_thumb.jpg "Показывать рекламу")
 Grey cilinder-3_thumb.jpg "Показывать рекламу")
 Grey cilinder-4_thumb.jpg "Показывать рекламу")
 Grey cilinder-5_thumb.jpg "Показывать рекламу")
 Grey cilinder-6_thumb.jpg "Показывать рекламу")
 Grey cilinder-7_thumb.jpg "Показывать рекламу")
 Grey cilinder-8_thumb.jpg "Показывать рекламу")
 Grey cilinder-9_thumb.jpg "Показывать рекламу")
 Grey cilinder-91_thumb.jpg "Показывать рекламу")
10
Оборудование для постпечатной обработкиПерфораторные станки
Heidelberg SBB ( 56×82 см) Серый цилиндр
Очень хороший цилиндр Heidelberg SBB.
Оснащен защитными кожухами с выключателями.
Электроника обновлена.
В комплекте с 2 пуансонными рамками
Heidelberg SBB ( 56×82 см) Серый цилиндр
Очень хороший цилиндр Heidelberg SBB.
Оснащен защитными кожухами с выключателями.
Электроника обновлена.
В комплекте с 2 пуансонными рамками
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
