7
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18657Hersteller: ENGELYear of construction: 2016Clamping unitClamping force: 160 tonOpening stroke: 900 mmMould height min.: 300 mmMould height max.: 600 mmPlaten size (h x v): 750 X 750 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 151 gInjection pressure: 2400 barMeasurements and weightDimensions: 5,7 X 1,8 X 2,2 mMachine weight: 10200 kgFurther information:Tie-bar-less + electric injection = maximum flexibility and precisionENGEL e-victory 440/160:👉 This is a hybrid machine (servo-hydraulic + electric)⸻🔍 How it works✔ Electric part:* Injection unit (screw movement)* Ensures very high precision and process stability✔ Hydraulic part:* Clamping unit (mould closing)* Maintains clamping force efficiently without continuous energy consumption👉 This system combines:* The precision of an all-electric machine* With the power and efficiency of a hydraulic systemThis is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design.The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing.Key features:* Tie-bar-less design for maximum mould flexibility* Servo-hydraulic drive for high energy efficiency* Precise and stable processing performance* Compact footprint with a large mould installation area* Modern ENGEL control systemThe machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures.Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.
Ref. no.: 18657
Hersteller: ENGEL
Year of construction: 2016
Clamping unit
Clamping force: 160 ton
Opening stroke: 900 mm
Mould height min.: 300 mm
Mould height max.: 600 mm
Platen size (h x v): 750 X 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 151 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 5,7 X 1,8 X 2,2 m
Machine weight: 10200 kg
Further information:
Tie-bar-less + electric injection = maximum flexibility and precision
ENGEL e-victory 440/160:
👉 This is a hybrid machine (servo-hydraulic + electric)
⸻
🔍 How it works
✔ Electric part:
* Injection unit (screw movement)
* Ensures very high precision and process stability
✔ Hydraulic part:
* Clamping unit (mould closing)
* Maintains clamping force efficiently without continuous energy consumption
👉 This system combines:
* The precision of an all-electric machine
* With the power and efficiency of a hydraulic system
This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design.
The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing.
Key features:
* Tie-bar-less design for maximum mould flexibility
* Servo-hydraulic drive for high energy efficiency
* Precise and stable processing performance
* Compact footprint with a large mould installation area
* Modern ENGEL control system
The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures.
Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ENGEL
Year of construction: 2016
Clamping unit
Clamping force: 160 ton
Opening stroke: 900 mm
Mould height min.: 300 mm
Mould height max.: 600 mm
Platen size (h x v): 750 X 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 151 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 5,7 X 1,8 X 2,2 m
Machine weight: 10200 kg
Further information:
Tie-bar-less + electric injection = maximum flexibility and precision
ENGEL e-victory 440/160:
👉 This is a hybrid machine (servo-hydraulic + electric)
⸻
🔍 How it works
✔ Electric part:
* Injection unit (screw movement)
* Ensures very high precision and process stability
✔ Hydraulic part:
* Clamping unit (mould closing)
* Maintains clamping force efficiently without continuous energy consumption
👉 This system combines:
* The precision of an all-electric machine
* With the power and efficiency of a hydraulic system
This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design.
The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing.
Key features:
* Tie-bar-less design for maximum mould flexibility
* Servo-hydraulic drive for high energy efficiency
* Precise and stable processing performance
* Compact footprint with a large mould installation area
* Modern ENGEL control system
The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures.
Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
12
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18597Hersteller: ENGELYear of construction: 2007Clamping unitClamping force: 70 tonOpening stroke: 305 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2381 barMeasurements and weightDimensions: 4,0 x 1,8 x 2,5 mMachine weight: 5600 kgFurther information:The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.The ENGEL INSERT series is particularly suitable for:* insert molding applications* metal/plastic combination parts* electronic component production* connector and cable technology* technical plastic parts* precision industrial productsWith its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
Ref. no.: 18597
Hersteller: ENGEL
Year of construction: 2007
Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar
Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg
Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.
One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.
Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.
The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.
The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.
The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.
The ENGEL INSERT series is particularly suitable for:
* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products
With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ENGEL
Year of construction: 2007
Clamping unit
Clamping force: 70 ton
Opening stroke: 305 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2381 bar
Measurements and weight
Dimensions: 4,0 x 1,8 x 2,5 m
Machine weight: 5600 kg
Further information:
The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.
One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products.
Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results.
The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production.
The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production.
The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition.
The ENGEL INSERT series is particularly suitable for:
* insert molding applications
* metal/plastic combination parts
* electronic component production
* connector and cable technology
* technical plastic parts
* precision industrial products
With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
10
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18494Hersteller: ENGELYear of construction: 2013Clamping unitClamping force: 50 tonOpening stroke: 400 mmMould height min.: 200 mmOpening width: 600 mmPlaten size (h x v): 500 X 450 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2400 barMeasurements and weightDimensions: 3,4 x 1,3 x 1,8 mMachine weight: 2900 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
13
Машины для обработки пластикаТермопластавтоматы
Ref. no.: 17147Hersteller: ENGELYear of construction: 2008Clamping unitClamping force: 400 tonOpening stroke: 1008 mmPlaten size (h x v): 1360 x 1460 mmInjection unitScrew diameter: 60 + 25 + 25+ 25+ 25 mmInjection volume: 608 + 54 + 54 + 54 + 54 cm³Shot weight: 547 + 48 + 48 + 48 + 48 gInjection pressure: 1725 + 1200 + 1200 + 1200 + 1200 barMeasurements and weightMachine weight: 22.000 + 6.600 kgDimensions LxWxH part 1: 5 x 2,3 x mDimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
12
Машины для обработки пластикаТермопластавтоматы
Ref. no.: 17146Hersteller: ENGELYear of construction: 2004Clamping unitClamping force: 300 tonOpening stroke: 855 mmInjection unitScrew diameter: 50 + 25 mmInjection volume: 393 + 49 cm³Shot weight: 354 + 44 gInjection pressure: 1917 + 1586 barMeasurements and weightDimensions: 6,5 x 2,3 x mMachine weight: 21000 kg
Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
13
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ссылка №: 18255
Hersteller: ЭНГЕЛЬ
Год постройки: 2004
Зажимной узел
Зажимное усилие: 180 тонн
Ход открытия: 750 мм
Расстояние между стяжками: 960 x 830 мм
Минимальная высота формы: 500 мм
Ширина открытия: 1250 мм
Блок впрыска
Диаметр винта: 45 мм
Объем впрыска: 318 см³
Вес выстрела: 302 г
Давление впрыска: 1769/2360 бар
Размеры и вес
Вес машины: 13500 кг
Робот
Продюсер: Витман
Тип: W743
Год: 2009
Ссылка №: 18255
Hersteller: ЭНГЕЛЬ
Год постройки: 2004
Зажимной узел
Зажимное усилие: 180 тонн
Ход открытия: 750 мм
Расстояние между стяжками: 960 x 830 мм
Минимальная высота формы: 500 мм
Ширина открытия: 1250 мм
Блок впрыска
Диаметр винта: 45 мм
Объем впрыска: 318 см³
Вес выстрела: 302 г
Давление впрыска: 1769/2360 бар
Размеры и вес
Вес машины: 13500 кг
Робот
Продюсер: Витман
Тип: W743
Год: 2009
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ЭНГЕЛЬ
Год постройки: 2004
Зажимной узел
Зажимное усилие: 180 тонн
Ход открытия: 750 мм
Расстояние между стяжками: 960 x 830 мм
Минимальная высота формы: 500 мм
Ширина открытия: 1250 мм
Блок впрыска
Диаметр винта: 45 мм
Объем впрыска: 318 см³
Вес выстрела: 302 г
Давление впрыска: 1769/2360 бар
Размеры и вес
Вес машины: 13500 кг
Робот
Продюсер: Витман
Тип: W743
Год: 2009
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
13
Машины для обработки пластикаТермопластавтоматыМногокомпонентные термопластавтоматы
Ref. no.: 18092Producer: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 25250 kg
Ref. no.: 18092
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Строительная техникаЛестница / строительные леса
Фото отличается от конфигурации, которая описана ниже.
1x платформа MiTower
1x защита от падения
8 монтажных рам 1000 мм
Максимальная высота 4000 мм
2 стабилизатора MiTower
10 распорок для перил 1200мм
4x поворотные колеса
Фото отличается от конфигурации, которая описана ниже.
1x платформа MiTower
1x защита от падения
8 монтажных рам 1000 мм
Максимальная высота 4000 мм
2 стабилизатора MiTower
10 распорок для перил 1200мм
4x поворотные колеса
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1x платформа MiTower
1x защита от падения
8 монтажных рам 1000 мм
Максимальная высота 4000 мм
2 стабилизатора MiTower
10 распорок для перил 1200мм
4x поворотные колеса
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Строительная техникаЛестница / строительные леса
Фото отличается от конфигурации, которая описана ниже.
1x платформа MiTower
1x защита от падения
8 монтажных рам 1000 мм
Максимальная высота 4000 мм
2 стабилизатора MiTower
10 распорок для перил 1200мм
4x поворотные колеса
Фото отличается от конфигурации, которая описана ниже.
1x платформа MiTower
1x защита от падения
8 монтажных рам 1000 мм
Максимальная высота 4000 мм
2 стабилизатора MiTower
10 распорок для перил 1200мм
4x поворотные колеса
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1x платформа MiTower
1x защита от падения
8 монтажных рам 1000 мм
Максимальная высота 4000 мм
2 стабилизатора MiTower
10 распорок для перил 1200мм
4x поворотные колеса
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.