10
Et işleme makineleri
Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available
Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Et işleme makineleri
Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph
Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
İçecek imalatıPompalar
Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec
Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
İçecek imalatıPompalar
Sigma S2CAHM07120PVT Metering pump, Serial: 2010132518, 2010, 0.25Kw, Metering pumps, 3 in stock
Sigma S2CAHM07120PVT Metering pump, Serial: 2010132518, 2010, 0.25Kw, Metering pumps, 3 in stock
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
5
Konteynerler, raflar ve tanklar
Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,
Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Et işleme makineleri
AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes
AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
Sac işleme makineleriKesit çelik makaslar
Punching power: 110 tonThroat depth: 610 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mmStroke: 80 mmStrokes: 28 1/minFlat steel: 600x15 / 400x20 mmAngle steel: 152x152x13 mmRound / square steel: 50 mmNotcher: 13x52x90 mmMotor: 9 kWLength: 2690 mmWidth: 1400 mmHeight: 2200 mmWeight: 3300 kg
Punching power: 110 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 420/20 bzw. 28/28 mm
Stroke: 80 mm
Strokes: 28 1/min
Flat steel: 600x15 / 400x20 mm
Angle steel: 152x152x13 mm
Round / square steel: 50 mm
Notcher: 13x52x90 mm
Motor: 9 kW
Length: 2690 mm
Width: 1400 mm
Height: 2200 mm
Weight: 3300 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
5
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 1550 mmMax. bending capacity - mild steel: 9Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mmUpper roll diameter: 180 mmLower roll diameter: 180 mmLateral roll diameter: 150 mmBending speed: 1,5 / 6 m/minMotor power: 5 kWLength: 3900 mmWidth: 1150 mmHeight: 1250 mmWeight: 3250 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 180 mm
Lower roll diameter: 180 mm
Lateral roll diameter: 150 mm
Bending speed: 1,5 / 6 m/min
Motor power: 5 kW
Length: 3900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 3250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 180 mm
Lower roll diameter: 180 mm
Lateral roll diameter: 150 mm
Bending speed: 1,5 / 6 m/min
Motor power: 5 kW
Length: 3900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 3250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Sac işleme makineleriDöner bükme makineleri
Bending length: 4010 mmBending capacity steel 400 N/mm²: 1.25 mmBending capacity Alu 190 N/mm²: 2 mmCutting capacity electrical shear: 1.25 mmNo. of stand and tension arm units: 4No. of driven linkage assemblies: 4Sheet insertion depth: 1000 mmOpening of upper beam: 190 mmWorking height: 835 mmMotor: 2.2 kWLength with electrical shear: 5200 mmWidth: 1300 mmHeight: 1900 mmWeight: 1550 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Opening of upper beam: 190 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 5200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 1550 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Bending capacity steel 400 N/mm²: 1.25 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1000 mm
Opening of upper beam: 190 mm
Working height: 835 mm
Motor: 2.2 kW
Length with electrical shear: 5200 mm
Width: 1300 mm
Height: 1900 mm
Weight: 1550 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
7
Baskı sonrası makineleriCiltleme makineleri
Renz Super 700 Wiro Punching Machine – Heavy-Duty Punching for Wire BindingThe Renz Super 700 is a robust, high-capacity punching machine designed for demanding production environments. Built for precision and durability, this semi-automatic wire punching system is ideal for professional print shops, bookbinding operations, and finishing departments.Key Features:Heavy-duty construction – Built to handle high-volume workloads with ease.Interchangeable punching dies – Quickly switch between different punch patterns for maximum flexibility.Punching width up to 700 mm – Suitable for a wide range of formats, including oversized documents.Foot pedal operation – For hands-free control and improved workflow efficiency.Clean and precise punching – Delivers consistent results across paper, cardboard, and plastic sheets.Whether you're producing calendars, notebooks, or presentation materials, the Renz Super 700 offers speed, reliability, and excellent punching quality for wire binding applications.Condition: Used, in excellent working conditionAvailable immediately – Contact us for pricing, shipping options, or to schedule a demo
Renz Super 700 Wiro Punching Machine – Heavy-Duty Punching for Wire Binding
The Renz Super 700 is a robust, high-capacity punching machine designed for demanding production environments. Built for precision and durability, this semi-automatic wire punching system is ideal for professional print shops, bookbinding operations, and finishing departments.
Key Features:
Heavy-duty construction – Built to handle high-volume workloads with ease.
Interchangeable punching dies – Quickly switch between different punch patterns for maximum flexibility.
Punching width up to 700 mm – Suitable for a wide range of formats, including oversized documents.
Foot pedal operation – For hands-free control and improved workflow efficiency.
Clean and precise punching – Delivers consistent results across paper, cardboard, and plastic sheets.
Whether you're producing calendars, notebooks, or presentation materials, the Renz Super 700 offers speed, reliability, and excellent punching quality for wire binding applications.
Condition: Used, in excellent working condition
Available immediately – Contact us for pricing, shipping options, or to schedule a demo
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
The Renz Super 700 is a robust, high-capacity punching machine designed for demanding production environments. Built for precision and durability, this semi-automatic wire punching system is ideal for professional print shops, bookbinding operations, and finishing departments.
Key Features:
Heavy-duty construction – Built to handle high-volume workloads with ease.
Interchangeable punching dies – Quickly switch between different punch patterns for maximum flexibility.
Punching width up to 700 mm – Suitable for a wide range of formats, including oversized documents.
Foot pedal operation – For hands-free control and improved workflow efficiency.
Clean and precise punching – Delivers consistent results across paper, cardboard, and plastic sheets.
Whether you're producing calendars, notebooks, or presentation materials, the Renz Super 700 offers speed, reliability, and excellent punching quality for wire binding applications.
Condition: Used, in excellent working condition
Available immediately – Contact us for pricing, shipping options, or to schedule a demo
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
TesterelerŞerit testereleri
Saw frame: Pivot frameBand dimensions: 4160x34x1,1 mmBand speed continous: 15 - 120 m/minCutting capacity 0° round: 320 mmCutting capacity 0° square: 320 mmCutting capacity 0° flat: 450x320 mmCutting capacity 30°: round 320 mm, square 320 mm, rectangular 380x320 mmCutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mmCutting capacity - 30°: round 320 mm, square 320 mm, rectangular 380x320 mmCutting capacity - 45°: round 320 mm, square 300 mm, rectangular 340x320 mmCutting capacity - 60°: round 230 mm, square 220 mm, rectangular 230x220 mmWorking height: 860 mmHydraulic motor: 0.37 kWMotor: 2.2 kWCoolant pump motor: 0.12 kWLength: 2230 mmWidth: 1150 mmHeight: 2140 mmWeight: 1030 kg
Saw frame: Pivot frame
Band dimensions: 4160x34x1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 450x320 mm
Cutting capacity 30°: round 320 mm, square 320 mm, rectangular 380x320 mm
Cutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mm
Cutting capacity - 30°: round 320 mm, square 320 mm, rectangular 380x320 mm
Cutting capacity - 45°: round 320 mm, square 300 mm, rectangular 340x320 mm
Cutting capacity - 60°: round 230 mm, square 220 mm, rectangular 230x220 mm
Working height: 860 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2230 mm
Width: 1150 mm
Height: 2140 mm
Weight: 1030 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Band dimensions: 4160x34x1,1 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 450x320 mm
Cutting capacity 30°: round 320 mm, square 320 mm, rectangular 380x320 mm
Cutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mm
Cutting capacity - 30°: round 320 mm, square 320 mm, rectangular 380x320 mm
Cutting capacity - 45°: round 320 mm, square 300 mm, rectangular 340x320 mm
Cutting capacity - 60°: round 230 mm, square 220 mm, rectangular 230x220 mm
Working height: 860 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2230 mm
Width: 1150 mm
Height: 2140 mm
Weight: 1030 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
Sac işleme makineleriDelme
Punching power: 47 tonThroat depth: 110 mmMax. hole diameter: 27 mmMax. oblong hole: 25x18 mmPunching time: 8 sMax. sheet thickness - mild steel: 16 mmWorking pressure: 700 barLength: 479 mmWidth: 135 mmHeight: 388 mmWeight: 117 kg
Punching power: 47 ton
Throat depth: 110 mm
Max. hole diameter: 27 mm
Max. oblong hole: 25x18 mm
Punching time: 8 s
Max. sheet thickness - mild steel: 16 mm
Working pressure: 700 bar
Length: 479 mm
Width: 135 mm
Height: 388 mm
Weight: 117 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Throat depth: 110 mm
Max. hole diameter: 27 mm
Max. oblong hole: 25x18 mm
Punching time: 8 s
Max. sheet thickness - mild steel: 16 mm
Working pressure: 700 bar
Length: 479 mm
Width: 135 mm
Height: 388 mm
Weight: 117 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Aksesuarlar ve yedek parçalar
Length: 835 mm
Length: 835 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpg "İlanı göster")
_thumb.jpg "İlanı göster")
_thumb.jpeg "İlanı göster")
3
Plastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18552Hersteller: BOYYear of construction: 1997Clamping unitClamping force: 22 tonOpening stroke: 200 mmDistance between tie bars: 254 mmMould height min.: 200 mmMould height max.: 400 mmPlaten size (h x v): 425 x 400 mmInjection unitScrew diameter: 28 mmInjection volume: 49 cm³Shot weight: 44 gInjection pressure: 1069 barMeasurements and weightDimensions: 2.3 x 0.81 x 1.63 mMachine weight: 760 kg
Ref. no.: 18552
Hersteller: BOY
Year of construction: 1997
Clamping unit
Clamping force: 22 ton
Opening stroke: 200 mm
Distance between tie bars: 254 mm
Mould height min.: 200 mm
Mould height max.: 400 mm
Platen size (h x v): 425 x 400 mm
Injection unit
Screw diameter: 28 mm
Injection volume: 49 cm³
Shot weight: 44 g
Injection pressure: 1069 bar
Measurements and weight
Dimensions: 2.3 x 0.81 x 1.63 m
Machine weight: 760 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: BOY
Year of construction: 1997
Clamping unit
Clamping force: 22 ton
Opening stroke: 200 mm
Distance between tie bars: 254 mm
Mould height min.: 200 mm
Mould height max.: 400 mm
Platen size (h x v): 425 x 400 mm
Injection unit
Screw diameter: 28 mm
Injection volume: 49 cm³
Shot weight: 44 g
Injection pressure: 1069 bar
Measurements and weight
Dimensions: 2.3 x 0.81 x 1.63 m
Machine weight: 760 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
7
Baskı sonrası makineleriBandrol makineleri
ATS US 2000 AB- Ultra-Sonic banding machine- Operation by foot or automatically by Photocell
ATS US 2000 AB
- Ultra-Sonic banding machine
- Operation by foot or automatically by Photocell
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
- Ultra-Sonic banding machine
- Operation by foot or automatically by Photocell
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Klasörler ve insertler
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
Klasörler ve insertler
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
Baskı sonrası makineleriAksesuarlar ve yedek parçalar
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
TesterelerŞerit testereleri
Saw frame: Double columnBand dimensions: 5750 x 41 x 1,3 mmBand speed continous: 15 - 120 m/minCutting capacity 0° round: 420 mmCutting capacity 0° square: 420 mmCutting capacity 0° flat: 420 x 420 mmWorking height: 805 mmHydraulic motor: 1.1 kWMotor: 5.5 kWServomotor: 1 kWCoolant pump motor: 0.12 kWLength: 2860 mmWidth: 1980 mmHeight: 2100 mmWeight: 3700 kg
Saw frame: Double column
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 420 mm
Cutting capacity 0° square: 420 mm
Cutting capacity 0° flat: 420 x 420 mm
Working height: 805 mm
Hydraulic motor: 1.1 kW
Motor: 5.5 kW
Servomotor: 1 kW
Coolant pump motor: 0.12 kW
Length: 2860 mm
Width: 1980 mm
Height: 2100 mm
Weight: 3700 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Band dimensions: 5750 x 41 x 1,3 mm
Band speed continous: 15 - 120 m/min
Cutting capacity 0° round: 420 mm
Cutting capacity 0° square: 420 mm
Cutting capacity 0° flat: 420 x 420 mm
Working height: 805 mm
Hydraulic motor: 1.1 kW
Motor: 5.5 kW
Servomotor: 1 kW
Coolant pump motor: 0.12 kW
Length: 2860 mm
Width: 1980 mm
Height: 2100 mm
Weight: 3700 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Sac işleme makineleriBoncuk makineleri
Max. thickness - mild steel: 0.8 mmThroat depth: 80 mmShaft length: 110 mmTools: 7 pcs.Rolls diameter: 52 mmLength: 380 mmWidth: 180 mmHeight: 380 mmWeight: 30 kg
Max. thickness - mild steel: 0.8 mm
Throat depth: 80 mm
Shaft length: 110 mm
Tools: 7 pcs.
Rolls diameter: 52 mm
Length: 380 mm
Width: 180 mm
Height: 380 mm
Weight: 30 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Throat depth: 80 mm
Shaft length: 110 mm
Tools: 7 pcs.
Rolls diameter: 52 mm
Length: 380 mm
Width: 180 mm
Height: 380 mm
Weight: 30 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
-1_thumb.jpeg "İlanı göster")
-2_thumb.jpeg "İlanı göster")
-3_thumb.jpeg "İlanı göster")
3
Etiket baskı ve kalıp kesme makinesi
Cauhe VA (1450 x 1850 mm) Die Cutter / Cauhe VA Heavy-Duty Large Format Die CutterVery neat machine, rarely used.Max format: (1450 x 1850 mm)Model: VAYear of manufacture: 2008Available immediately!
Cauhe VA (1450 x 1850 mm) Die Cutter / Cauhe VA Heavy-Duty Large Format Die Cutter
Very neat machine, rarely used.
Max format: (1450 x 1850 mm)
Model: VA
Year of manufacture: 2008
Available immediately!
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Very neat machine, rarely used.
Max format: (1450 x 1850 mm)
Model: VA
Year of manufacture: 2008
Available immediately!
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Sac işleme makineleriDöner bükme makineleri
Bending length: 2040 mmSheet thickness (420 N/mm²): 3 mmMax. thickness - stainless steel: 2 mmMax. thickness - aluminium: 4.5 mmAntrieb: MotorizedMotor bending beam: 1.5 kWUpper beam motor: 1.1 kWBack gauge: 750 mmOpening of upper beam: 140 mmBending speed: 50 °/sekLength: 3060 mmWidth: 1650 mmHeight: 1500 mmWeight: 2730 kg
Bending length: 2040 mm
Sheet thickness (420 N/mm²): 3 mm
Max. thickness - stainless steel: 2 mm
Max. thickness - aluminium: 4.5 mm
Antrieb: Motorized
Motor bending beam: 1.5 kW
Upper beam motor: 1.1 kW
Back gauge: 750 mm
Opening of upper beam: 140 mm
Bending speed: 50 °/sek
Length: 3060 mm
Width: 1650 mm
Height: 1500 mm
Weight: 2730 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Sheet thickness (420 N/mm²): 3 mm
Max. thickness - stainless steel: 2 mm
Max. thickness - aluminium: 4.5 mm
Antrieb: Motorized
Motor bending beam: 1.5 kW
Upper beam motor: 1.1 kW
Back gauge: 750 mm
Opening of upper beam: 140 mm
Bending speed: 50 °/sek
Length: 3060 mm
Width: 1650 mm
Height: 1500 mm
Weight: 2730 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
-1_thumb.jpeg "İlanı göster")
-2_thumb.jpeg "İlanı göster")
-3_thumb.jpeg "İlanı göster")
-4_thumb.jpeg "İlanı göster")
-5_thumb.jpeg "İlanı göster")
-6_thumb.jpeg "İlanı göster")
-7_thumb.jpeg "İlanı göster")
-9_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
10
Kesme makineleri
Polar 92 XTYear: 2007Touch screen controlNormal and small clamping plateKnife change toolsSpare knivesBig right side tableP-net Netwerk integration P-N V1.1.2
Polar 92 XT
Year: 2007
Touch screen control
Normal and small clamping plate
Knife change tools
Spare knives
Big right side table
P-net Netwerk integration P-N V1.1.2
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Year: 2007
Touch screen control
Normal and small clamping plate
Knife change tools
Spare knives
Big right side table
P-net Netwerk integration P-N V1.1.2
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpg "İlanı göster")
6
Werkbank mit schraubstock / Gedore2Meter x0,7 meter2xschubladen2x flügeltüren
Werkbank mit schraubstock / Gedore
2Meter x0,7 meter
2xschubladen
2x flügeltüren
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2Meter x0,7 meter
2xschubladen
2x flügeltüren
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Kumlama makineleriTitreşimli taşlama makineleri
Walther CN - 550 -PN Gleitschleifanlage u. Rösler Z300 Turbo Floc Zentrifuge-Walther Trowal CN-550-PN-1460 U/min-550 Liter Fassungsvermögen-Motor 3,5 KW-Pneumatischer Schallschutzdeckel-Schaltschrank-Schmutzwasser / Ablasseinrichtung-Compound - Gleitsteine 2xBoxen-Dokumentation-Abmaße: LxBxH 2x1,8x1,8 Meter / Gewicht 1500Kg-Rösler - Z300 Turbo-Floc / Zentrifuge-Baujahr 1996-Rotordrehzahl 3160 U/min-Leistung 4 KW-Max. Durchsatzleistung 800 / Liter/ Stunde-Dokumentation-Abmaße LxBxH 1,7x1x1,6 Meter / Gewicht 400KgBvticjyuvm
Walther CN - 550 -PN Gleitschleifanlage u. Rösler Z300 Turbo Floc Zentrifuge
-Walther Trowal CN-550-PN
-1460 U/min
-550 Liter Fassungsvermögen
-Motor 3,5 KW
-Pneumatischer Schallschutzdeckel
-Schaltschrank
-Schmutzwasser / Ablasseinrichtung
-Compound - Gleitsteine 2xBoxen
-Dokumentation
-Abmaße: LxBxH 2x1,8x1,8 Meter / Gewicht 1500Kg
-Rösler - Z300 Turbo-Floc / Zentrifuge
-Baujahr 1996
-Rotordrehzahl 3160 U/min
-Leistung 4 KW
-Max. Durchsatzleistung 800 / Liter/ Stunde
-Dokumentation
-Abmaße LxBxH 1,7x1x1,6 Meter / Gewicht 400Kg
Bvticjyuvm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
-Walther Trowal CN-550-PN
-1460 U/min
-550 Liter Fassungsvermögen
-Motor 3,5 KW
-Pneumatischer Schallschutzdeckel
-Schaltschrank
-Schmutzwasser / Ablasseinrichtung
-Compound - Gleitsteine 2xBoxen
-Dokumentation
-Abmaße: LxBxH 2x1,8x1,8 Meter / Gewicht 1500Kg
-Rösler - Z300 Turbo-Floc / Zentrifuge
-Baujahr 1996
-Rotordrehzahl 3160 U/min
-Leistung 4 KW
-Max. Durchsatzleistung 800 / Liter/ Stunde
-Dokumentation
-Abmaße LxBxH 1,7x1x1,6 Meter / Gewicht 400Kg
Bvticjyuvm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
6
Darex Spiralbohrer PräzisionsschleifmaschineDarex Sp 25003GehanrbSchleifdurchmesser: 1,5-16mmZubehör: 2 Werkzeugaufnahmen
Darex Spiralbohrer Präzisionsschleifmaschine
Darex Sp 2500
3Gehanrb
Schleifdurchmesser: 1,5-16mm
Zubehör: 2 Werkzeugaufnahmen
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Darex Sp 2500
3Gehanrb
Schleifdurchmesser: 1,5-16mm
Zubehör: 2 Werkzeugaufnahmen
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Baskı sonrası makineleriZımba
For Sale: Large Format Booklet MakerDesigned for digital and litho outputMax sheet length: 640mmCreates: A4 landscape & portrait bookletsFunctions: Jogging, stapling, foldingOptional: Modular T640 face trimmerAutomatic operation: Photo sensor detects sheets and cycles machine automaticallyCapacity: Produces booklets up to 100 pagesPrecise alignment: Side jogs sheets from both sides before staplingStapling:2 stapling heads, 4 stapling positionsClenched staple finishLow staple warning & stop functionSpace-saving design: Built-in conveyor stacker folds away when not in useEnergy-efficient: Drive motor shuts down automatically when idleResettable counterSpecifications:Paper size: A5 to 640mm x 320mmPower supply: 220V, 50Hz📩 Contact us for pricing and more details!
For Sale: Large Format Booklet Maker
Designed for digital and litho output
Max sheet length: 640mm
Creates: A4 landscape & portrait booklets
Functions: Jogging, stapling, folding
Optional: Modular T640 face trimmer
Automatic operation: Photo sensor detects sheets and cycles machine automatically
Capacity: Produces booklets up to 100 pages
Precise alignment: Side jogs sheets from both sides before stapling
Stapling:
2 stapling heads, 4 stapling positions
Clenched staple finish
Low staple warning & stop function
Space-saving design: Built-in conveyor stacker folds away when not in use
Energy-efficient: Drive motor shuts down automatically when idle
Resettable counter
Specifications:
Paper size: A5 to 640mm x 320mm
Power supply: 220V, 50Hz
📩 Contact us for pricing and more details!
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Designed for digital and litho output
Max sheet length: 640mm
Creates: A4 landscape & portrait booklets
Functions: Jogging, stapling, folding
Optional: Modular T640 face trimmer
Automatic operation: Photo sensor detects sheets and cycles machine automatically
Capacity: Produces booklets up to 100 pages
Precise alignment: Side jogs sheets from both sides before stapling
Stapling:
2 stapling heads, 4 stapling positions
Clenched staple finish
Low staple warning & stop function
Space-saving design: Built-in conveyor stacker folds away when not in use
Energy-efficient: Drive motor shuts down automatically when idle
Resettable counter
Specifications:
Paper size: A5 to 640mm x 320mm
Power supply: 220V, 50Hz
📩 Contact us for pricing and more details!
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
9
For Sale: 2x Gardner Denver DLR 300 Pumps with Control Cabinet and Mounting PlatesBrand/Model: Elmo Rietschle / Gardner Denver DLR 300Year of Manufacture: 2010Capacity: 300 m³/hourPressure: 1.4 barPower: 11 kW per pumpYear: 2010Includes:Control cabinet with Siemens S7 PLC and pre-installed program2x Danfoss VLT frequency regulators (11 kW each)2 mounting plates for pump installationCondition: Removed in working condition from an industrial facilityA well-maintained set, ideal for various industrial applications.📩 Contact us for pricing and more details!
For Sale: 2x Gardner Denver DLR 300 Pumps with Control Cabinet and Mounting Plates
Brand/Model: Elmo Rietschle / Gardner Denver DLR 300
Year of Manufacture: 2010
Capacity: 300 m³/hour
Pressure: 1.4 bar
Power: 11 kW per pump
Year: 2010
Includes:
Control cabinet with Siemens S7 PLC and pre-installed program
2x Danfoss VLT frequency regulators (11 kW each)
2 mounting plates for pump installation
Condition: Removed in working condition from an industrial facility
A well-maintained set, ideal for various industrial applications.
📩 Contact us for pricing and more details!
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Brand/Model: Elmo Rietschle / Gardner Denver DLR 300
Year of Manufacture: 2010
Capacity: 300 m³/hour
Pressure: 1.4 bar
Power: 11 kW per pump
Year: 2010
Includes:
Control cabinet with Siemens S7 PLC and pre-installed program
2x Danfoss VLT frequency regulators (11 kW each)
2 mounting plates for pump installation
Condition: Removed in working condition from an industrial facility
A well-maintained set, ideal for various industrial applications.
📩 Contact us for pricing and more details!
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_1_thumb.jpeg "İlanı göster")
_2_thumb.jpeg "İlanı göster")
_3_thumb.jpeg "İlanı göster")
_4._thumb.jpeg "İlanı göster")
_5_thumb.jpeg "İlanı göster")
_6_thumb.jpeg "İlanı göster")
_7_thumb.jpeg "İlanı göster")
_8_thumb.jpeg "İlanı göster")
8
Baskı sonrası makineleriLaminasyon makineleri
D&K Europa System B2 Laminator automatic laminating machineTechnical data:Max sheet size: 540mm x 740mmMin sheet size: 210mm x 220mmMin grammage: 115 gsmMax grammage: 400 gsmOperating temperature: 80-145°CWeight: 750 kgPower supply 380VSteel, chrome-plated cylinderPneumatic pressure, separation and automatic feeding from a high stack.Sheet feeding accuracy: ±2.0mm.Touch panel for easy operation.Sheet straightening module.
D&K Europa System B2 Laminator automatic laminating machine
Technical data:
Max sheet size: 540mm x 740mm
Min sheet size: 210mm x 220mm
Min grammage: 115 gsm
Max grammage: 400 gsm
Operating temperature: 80-145°C
Weight: 750 kg
Power supply 380V
Steel, chrome-plated cylinder
Pneumatic pressure, separation and automatic feeding from a high stack.
Sheet feeding accuracy: ±2.0mm.
Touch panel for easy operation.
Sheet straightening module.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Technical data:
Max sheet size: 540mm x 740mm
Min sheet size: 210mm x 220mm
Min grammage: 115 gsm
Max grammage: 400 gsm
Operating temperature: 80-145°C
Weight: 750 kg
Power supply 380V
Steel, chrome-plated cylinder
Pneumatic pressure, separation and automatic feeding from a high stack.
Sheet feeding accuracy: ±2.0mm.
Touch panel for easy operation.
Sheet straightening module.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYem düzleştiriciler
Min. coil inner diameter: 400 mmMax. Coil inner diameter: 700Max. coil width: 1500 mmLength: 2050 mmWidth: 820 mmHeight: 1000 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
TornalarMerkez torna tezgahları ve mil torna tezgahları
Leit-und Zugspindeldrehmaschine OPTIturn TH 3309DArtikelnummer: 04-03-107Hersteller: OptimumNeumaschineLieferzeit: sofort verfügbarMaschine werkstattgeprüftBaujahr: 2024L x B x H: ca.1685x745x1590mmGewicht: ca.512kgArbeitsbereiche:Spitzenhöhe: 165mmSpitzenweite: 830mmUmlaufdurchmesser über Maschinenbett: 330mmUmlaufdurchmesser über Planschlitten: 208mmDrehlänge in der Bettbrücke: 430mmDrehzahlbereiche:Anzahl der Drehzahlbereiche: 16Drehzahlbereich: 70-2000 min-1Elektrische Daten:Leistung Antriebsmotor: 1,5 kWAnschlussspannung: 400 VNetzfrequenz: 50 HzSpindel:Spindelaufnahme: Camlock DIN ISO 702-2 Nr.4Spindelbohrung: 38mmStahlhalter Aufnahmehöhe max.: 16mmSpindelkonus: MK5Reitstock:Reitstockaufnahme: MK3Reitstockpinolenhub: 110mmReitstock Pinolendurchmesser: 32mmSteigungen:Steigung Metrisch: 0,4-7 mm/U ( 26 Steigungen )Steigung Zoll: 56-4 Gg/1`` ( 34 Steigungen )Vorschub:Längs: 0,052 - 1,392 mm/U ( 32 Vorschübe )Plan: 0,014 - 0,38 mm/U ( 32 Vorschübe )Zubehör:Feststehende Lünette (Durchlass Ø 6 - Ø 50 mm)Mitlaufende Lünette (Durchlass Ø 8 - Ø 30 mm)LED-MaschinenleuchteReduzierhülse MK 5 / MK 3Zwei feste Zentrierspitzen MK 3Vierfach-Stahlhalter 16 mmWechselzahnräder-SatzMaschinenunterbauMaschinenerstbefüllung mit QualitätsölBedienwerkzeugWeiteres Zubehör auf AnfragePreis und weitere technische Daten auf Anfrage
Leit-und Zugspindeldrehmaschine OPTIturn TH 3309D
Artikelnummer: 04-03-107
Hersteller: Optimum
Neumaschine
Lieferzeit: sofort verfügbar
Maschine werkstattgeprüft
Baujahr: 2024
L x B x H: ca.1685x745x1590mm
Gewicht: ca.512kg
Arbeitsbereiche:
Spitzenhöhe: 165mm
Spitzenweite: 830mm
Umlaufdurchmesser über Maschinenbett: 330mm
Umlaufdurchmesser über Planschlitten: 208mm
Drehlänge in der Bettbrücke: 430mm
Drehzahlbereiche:
Anzahl der Drehzahlbereiche: 16
Drehzahlbereich: 70-2000 min-1
Elektrische Daten:
Leistung Antriebsmotor: 1,5 kW
Anschlussspannung: 400 V
Netzfrequenz: 50 Hz
Spindel:
Spindelaufnahme: Camlock DIN ISO 702-2 Nr.4
Spindelbohrung: 38mm
Stahlhalter Aufnahmehöhe max.: 16mm
Spindelkonus: MK5
Reitstock:
Reitstockaufnahme: MK3
Reitstockpinolenhub: 110mm
Reitstock Pinolendurchmesser: 32mm
Steigungen:
Steigung Metrisch: 0,4-7 mm/U ( 26 Steigungen )
Steigung Zoll: 56-4 Gg/1`` ( 34 Steigungen )
Vorschub:
Längs: 0,052 - 1,392 mm/U ( 32 Vorschübe )
Plan: 0,014 - 0,38 mm/U ( 32 Vorschübe )
Zubehör:
Feststehende Lünette (Durchlass Ø 6 - Ø 50 mm)
Mitlaufende Lünette (Durchlass Ø 8 - Ø 30 mm)
LED-Maschinenleuchte
Reduzierhülse MK 5 / MK 3
Zwei feste Zentrierspitzen MK 3
Vierfach-Stahlhalter 16 mm
Wechselzahnräder-Satz
Maschinenunterbau
Maschinenerstbefüllung mit Qualitätsöl
Bedienwerkzeug
Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Artikelnummer: 04-03-107
Hersteller: Optimum
Neumaschine
Lieferzeit: sofort verfügbar
Maschine werkstattgeprüft
Baujahr: 2024
L x B x H: ca.1685x745x1590mm
Gewicht: ca.512kg
Arbeitsbereiche:
Spitzenhöhe: 165mm
Spitzenweite: 830mm
Umlaufdurchmesser über Maschinenbett: 330mm
Umlaufdurchmesser über Planschlitten: 208mm
Drehlänge in der Bettbrücke: 430mm
Drehzahlbereiche:
Anzahl der Drehzahlbereiche: 16
Drehzahlbereich: 70-2000 min-1
Elektrische Daten:
Leistung Antriebsmotor: 1,5 kW
Anschlussspannung: 400 V
Netzfrequenz: 50 Hz
Spindel:
Spindelaufnahme: Camlock DIN ISO 702-2 Nr.4
Spindelbohrung: 38mm
Stahlhalter Aufnahmehöhe max.: 16mm
Spindelkonus: MK5
Reitstock:
Reitstockaufnahme: MK3
Reitstockpinolenhub: 110mm
Reitstock Pinolendurchmesser: 32mm
Steigungen:
Steigung Metrisch: 0,4-7 mm/U ( 26 Steigungen )
Steigung Zoll: 56-4 Gg/1`` ( 34 Steigungen )
Vorschub:
Längs: 0,052 - 1,392 mm/U ( 32 Vorschübe )
Plan: 0,014 - 0,38 mm/U ( 32 Vorschübe )
Zubehör:
Feststehende Lünette (Durchlass Ø 6 - Ø 50 mm)
Mitlaufende Lünette (Durchlass Ø 8 - Ø 30 mm)
LED-Maschinenleuchte
Reduzierhülse MK 5 / MK 3
Zwei feste Zentrierspitzen MK 3
Vierfach-Stahlhalter 16 mm
Wechselzahnräder-Satz
Maschinenunterbau
Maschinenerstbefüllung mit Qualitätsöl
Bedienwerkzeug
Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
TornalarCNC torna tezgahları
CNC Drehmaschine YCM TC-2Artikelnummer: 04-02-090Hersteller: YCMGuter AllgemeinzustandMaschine werkstattgeprüftLieferzeit: Sofort-Zwischenverkauf vorbehaltenBaujahr: ca.1990L x B x H: ca.2400x1400x2100mmGewicht: ca.3600kgSteuerung: Fanuc O-TDrehdurchmesser über Bett: ca.480mmDrehdurchmesser über Schlitten: ca.310mmSpindelbohrung: ca.52mmMax. Bearbeitungsdurchmesser: ca.250mmSpitzenweite: ca.550mmDrehzahlbereich: ca.110-3500 U/minVorschub X: ca.10 m/minVorschub Z: ca.15 m/minWerkzeugrevolver: 8 StationenZubehör:3 BackenfutterDiverse WerkzeughalterSpänefördererMaschinenfüßeDokumentationMitlaufende SpitzeDiverse BackenWeiteres Zubehör auf AnfragePreis und weitere technische Daten auf Anfrage
CNC Drehmaschine YCM TC-2
Artikelnummer: 04-02-090
Hersteller: YCM
Guter Allgemeinzustand
Maschine werkstattgeprüft
Lieferzeit: Sofort-Zwischenverkauf vorbehalten
Baujahr: ca.1990
L x B x H: ca.2400x1400x2100mm
Gewicht: ca.3600kg
Steuerung: Fanuc O-T
Drehdurchmesser über Bett: ca.480mm
Drehdurchmesser über Schlitten: ca.310mm
Spindelbohrung: ca.52mm
Max. Bearbeitungsdurchmesser: ca.250mm
Spitzenweite: ca.550mm
Drehzahlbereich: ca.110-3500 U/min
Vorschub X: ca.10 m/min
Vorschub Z: ca.15 m/min
Werkzeugrevolver: 8 Stationen
Zubehör:
3 Backenfutter
Diverse Werkzeughalter
Späneförderer
Maschinenfüße
Dokumentation
Mitlaufende Spitze
Diverse Backen
Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Artikelnummer: 04-02-090
Hersteller: YCM
Guter Allgemeinzustand
Maschine werkstattgeprüft
Lieferzeit: Sofort-Zwischenverkauf vorbehalten
Baujahr: ca.1990
L x B x H: ca.2400x1400x2100mm
Gewicht: ca.3600kg
Steuerung: Fanuc O-T
Drehdurchmesser über Bett: ca.480mm
Drehdurchmesser über Schlitten: ca.310mm
Spindelbohrung: ca.52mm
Max. Bearbeitungsdurchmesser: ca.250mm
Spitzenweite: ca.550mm
Drehzahlbereich: ca.110-3500 U/min
Vorschub X: ca.10 m/min
Vorschub Z: ca.15 m/min
Werkzeugrevolver: 8 Stationen
Zubehör:
3 Backenfutter
Diverse Werkzeughalter
Späneförderer
Maschinenfüße
Dokumentation
Mitlaufende Spitze
Diverse Backen
Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
TesterelerŞerit testere makineleri
Hydraulische Schwenkrahmen-Metallbandsäge BMBS 230 x 280 H-DGArtikelnummer: 19-03-026Hersteller: MetallkraftNeumaschineLieferzeit: sofort verfügbarMaschine werkstattgeprüftBaujahr: 2025 / NeumaschineL x B x H: ca.1610x890x1950mmGewicht: ca.320kgElektrische Daten:Leistung Antriebsmotor: 0,9 / 1,4 kWAnschlussspannung: 400 VNetzfrequenz: 50 HzMaschinendaten:Sägebandgeschwindigkeit(en) 35 / 70m/minSägebandlänge 2720mmSägebanddicke 0,9mmGeschwindigkeitsstufen 2Sägebandbreite 27mmSchnittbereiche:Schnittbereich 0° rund (Rohr) 230mmSchnittbereich 0° rund (Vollmaterial) 150mmSchnittbereich 0° rechteck liegend (Hohlprofil) 280 x 220mmSchnittbereich 0° Bündel (Rohr) 280 x 120mmSchnittbereich -45° rund (Rohr) 190mmSchnittbereich -45° rund (Vollmaterial) 110mmSchnittbereich -45° rechteck liegend (Hohlprofil) 180 x 170mmSchnittbereich -60° rund (Rohr) 120mmSchnittbereich +45° rund (Vollmaterial) 110mmSchnittbereich -60° rund (Vollmaterial) 80mmSchnittbereich +45° rund (Rohr) 185mmSchnittbereich +45° rechteck liegend (Hohlprofil) 180 x 120mmSchnittbereich -60° rechteck liegend (Hohlprofil) 120 x 90mmMaterialvorschubTischhöhe Materialzufuhr: 787mmZubehör:SägebandKühlmittelpumpeBedienwerkzeugWeiteres Zubehör auf AnfragePreis und weitere technische Daten auf Anfrage
Hydraulische Schwenkrahmen-Metallbandsäge BMBS 230 x 280 H-DG
Artikelnummer: 19-03-026
Hersteller: Metallkraft
Neumaschine
Lieferzeit: sofort verfügbar
Maschine werkstattgeprüft
Baujahr: 2025 / Neumaschine
L x B x H: ca.1610x890x1950mm
Gewicht: ca.320kg
Elektrische Daten:
Leistung Antriebsmotor: 0,9 / 1,4 kW
Anschlussspannung: 400 V
Netzfrequenz: 50 Hz
Maschinendaten:
Sägebandgeschwindigkeit(en) 35 / 70m/min
Sägebandlänge 2720mm
Sägebanddicke 0,9mm
Geschwindigkeitsstufen 2
Sägebandbreite 27mm
Schnittbereiche:
Schnittbereich 0° rund (Rohr) 230mm
Schnittbereich 0° rund (Vollmaterial) 150mm
Schnittbereich 0° rechteck liegend (Hohlprofil) 280 x 220mm
Schnittbereich 0° Bündel (Rohr) 280 x 120mm
Schnittbereich -45° rund (Rohr) 190mm
Schnittbereich -45° rund (Vollmaterial) 110mm
Schnittbereich -45° rechteck liegend (Hohlprofil) 180 x 170mm
Schnittbereich -60° rund (Rohr) 120mm
Schnittbereich +45° rund (Vollmaterial) 110mm
Schnittbereich -60° rund (Vollmaterial) 80mm
Schnittbereich +45° rund (Rohr) 185mm
Schnittbereich +45° rechteck liegend (Hohlprofil) 180 x 120mm
Schnittbereich -60° rechteck liegend (Hohlprofil) 120 x 90mm
Materialvorschub
Tischhöhe Materialzufuhr: 787mm
Zubehör:
Sägeband
Kühlmittelpumpe
Bedienwerkzeug
Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Artikelnummer: 19-03-026
Hersteller: Metallkraft
Neumaschine
Lieferzeit: sofort verfügbar
Maschine werkstattgeprüft
Baujahr: 2025 / Neumaschine
L x B x H: ca.1610x890x1950mm
Gewicht: ca.320kg
Elektrische Daten:
Leistung Antriebsmotor: 0,9 / 1,4 kW
Anschlussspannung: 400 V
Netzfrequenz: 50 Hz
Maschinendaten:
Sägebandgeschwindigkeit(en) 35 / 70m/min
Sägebandlänge 2720mm
Sägebanddicke 0,9mm
Geschwindigkeitsstufen 2
Sägebandbreite 27mm
Schnittbereiche:
Schnittbereich 0° rund (Rohr) 230mm
Schnittbereich 0° rund (Vollmaterial) 150mm
Schnittbereich 0° rechteck liegend (Hohlprofil) 280 x 220mm
Schnittbereich 0° Bündel (Rohr) 280 x 120mm
Schnittbereich -45° rund (Rohr) 190mm
Schnittbereich -45° rund (Vollmaterial) 110mm
Schnittbereich -45° rechteck liegend (Hohlprofil) 180 x 170mm
Schnittbereich -60° rund (Rohr) 120mm
Schnittbereich +45° rund (Vollmaterial) 110mm
Schnittbereich -60° rund (Vollmaterial) 80mm
Schnittbereich +45° rund (Rohr) 185mm
Schnittbereich +45° rechteck liegend (Hohlprofil) 180 x 120mm
Schnittbereich -60° rechteck liegend (Hohlprofil) 120 x 90mm
Materialvorschub
Tischhöhe Materialzufuhr: 787mm
Zubehör:
Sägeband
Kühlmittelpumpe
Bedienwerkzeug
Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
TornalarMerkez torna tezgahları ve mil torna tezgahları
Präzisions- Leit- und Zugspindeldrehmaschine OPTIturn TX 4814VArtikelnummer: 04-03-106Hersteller: OptimumNeumaschineLieferzeit: auf AnfrageMaschine werkstattgeprüftBaujahr: 2025 / NeumaschineL x B x H: 2288x1050x1740mmGewicht: 1700kgArbeitsbereiche:Spitzenhöhe: 240mmSpitzenweite: 1260mmUmlaufdurchmesser über Bett: 480mmBettbreite: 300mmDrehzahlbereich:Anzahl der Drehzahlbereiche: 6 StufenDrehzahlbereich: 20 - 2500 min -1Elektrische Daten:Leistung Antriebsmotor: 5,5 kWAnschlussspannung: 400 VNetzfrequenz: 50 HzSpindel:Spindelaufnahme: Camlock DIN ISO 702-2 Nr. 8Spindelbohrung/Stangendurchlass Durchmesser: 80mmSpindelkonus: MK 7Steigungen:Steigung Metrisch: 0,5-7,5 mm/UAnzahl der Steigungen Metrisch: 44Verfahrweg:Verfahrweg Oberschlitten: 153mmVerfahrweg Planschlitten: 290mmVorschub:Vorschubbereich längs: 0,05-0,752 mm/UAnzahl der Vorschübe längs: 44Vorschubbereich plan: 0,025-0,376 mm/UAnzahl der Vorschübe plan: 44Zubehör:BedienwerkzeugMaschinenerstbefüllung mit QualitätsölDreibacken-Drehfutter Ø 200 mmCamlock Nr. 8Zwei nicht mitlaufende Zentrierspitzen MK6 und MK5Schnellwechselhalter SWH 5-BWeiteres Zubehör auf AnfragePreis und weitere technische Daten auf Anfrage
Präzisions- Leit- und Zugspindeldrehmaschine OPTIturn TX 4814V
Artikelnummer: 04-03-106
Hersteller: Optimum
Neumaschine
Lieferzeit: auf Anfrage
Maschine werkstattgeprüft
Baujahr: 2025 / Neumaschine
L x B x H: 2288x1050x1740mm
Gewicht: 1700kg
Arbeitsbereiche:
Spitzenhöhe: 240mm
Spitzenweite: 1260mm
Umlaufdurchmesser über Bett: 480mm
Bettbreite: 300mm
Drehzahlbereich:
Anzahl der Drehzahlbereiche: 6 Stufen
Drehzahlbereich: 20 - 2500 min -1
Elektrische Daten:
Leistung Antriebsmotor: 5,5 kW
Anschlussspannung: 400 V
Netzfrequenz: 50 Hz
Spindel:
Spindelaufnahme: Camlock DIN ISO 702-2 Nr. 8
Spindelbohrung/Stangendurchlass Durchmesser: 80mm
Spindelkonus: MK 7
Steigungen:
Steigung Metrisch: 0,5-7,5 mm/U
Anzahl der Steigungen Metrisch: 44
Verfahrweg:
Verfahrweg Oberschlitten: 153mm
Verfahrweg Planschlitten: 290mm
Vorschub:
Vorschubbereich längs: 0,05-0,752 mm/U
Anzahl der Vorschübe längs: 44
Vorschubbereich plan: 0,025-0,376 mm/U
Anzahl der Vorschübe plan: 44
Zubehör:
Bedienwerkzeug
Maschinenerstbefüllung mit Qualitätsöl
Dreibacken-Drehfutter Ø 200 mm
Camlock Nr. 8
Zwei nicht mitlaufende Zentrierspitzen MK6 und MK5
Schnellwechselhalter SWH 5-B
Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Artikelnummer: 04-03-106
Hersteller: Optimum
Neumaschine
Lieferzeit: auf Anfrage
Maschine werkstattgeprüft
Baujahr: 2025 / Neumaschine
L x B x H: 2288x1050x1740mm
Gewicht: 1700kg
Arbeitsbereiche:
Spitzenhöhe: 240mm
Spitzenweite: 1260mm
Umlaufdurchmesser über Bett: 480mm
Bettbreite: 300mm
Drehzahlbereich:
Anzahl der Drehzahlbereiche: 6 Stufen
Drehzahlbereich: 20 - 2500 min -1
Elektrische Daten:
Leistung Antriebsmotor: 5,5 kW
Anschlussspannung: 400 V
Netzfrequenz: 50 Hz
Spindel:
Spindelaufnahme: Camlock DIN ISO 702-2 Nr. 8
Spindelbohrung/Stangendurchlass Durchmesser: 80mm
Spindelkonus: MK 7
Steigungen:
Steigung Metrisch: 0,5-7,5 mm/U
Anzahl der Steigungen Metrisch: 44
Verfahrweg:
Verfahrweg Oberschlitten: 153mm
Verfahrweg Planschlitten: 290mm
Vorschub:
Vorschubbereich längs: 0,05-0,752 mm/U
Anzahl der Vorschübe längs: 44
Vorschubbereich plan: 0,025-0,376 mm/U
Anzahl der Vorschübe plan: 44
Zubehör:
Bedienwerkzeug
Maschinenerstbefüllung mit Qualitätsöl
Dreibacken-Drehfutter Ø 200 mm
Camlock Nr. 8
Zwei nicht mitlaufende Zentrierspitzen MK6 und MK5
Schnellwechselhalter SWH 5-B
Weiteres Zubehör auf Anfrage
Preis und weitere technische Daten auf Anfrage
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
Kumlama makineleriKoni çanak taşlama makineleri
Vertical surface grinding machine Delta LF 350Item number: 14-10-050Manufacturer: DeltaVery good general conditionMachine workshop-testedDelivery time: subject to immediate prior saleYear of manufacture: approx. 1995L x W x H: approx. 1200x1200x1800mmWeight: approx. 400kgControl: conventionalGrinding range:Grinding length: approx. 360mmGrinding width: approx. 155mmMax. grinding height: approx. 280mmMagnetic clamping surface: approx. 350x150mmDrive power: approx. 2.2 kWGrinding spindle speed: approx. 2840 rpmGrinding wheel dimensions: approx. Ø 200x80x78mmZ-feed: manualGrinding movement: manualAccessories:Grinding wheelDocumentationVarious wrenchesMachine feetPulling deviceGrinding wheel protectionSplash guard housingOther accessories on requestPrice and further technical data on request
Vertical surface grinding machine Delta LF 350
Item number: 14-10-050
Manufacturer: Delta
Very good general condition
Machine workshop-tested
Delivery time: subject to immediate prior sale
Year of manufacture: approx. 1995
L x W x H: approx. 1200x1200x1800mm
Weight: approx. 400kg
Control: conventional
Grinding range:
Grinding length: approx. 360mm
Grinding width: approx. 155mm
Max. grinding height: approx. 280mm
Magnetic clamping surface: approx. 350x150mm
Drive power: approx. 2.2 kW
Grinding spindle speed: approx. 2840 rpm
Grinding wheel dimensions: approx. Ø 200x80x78mm
Z-feed: manual
Grinding movement: manual
Accessories:
Grinding wheel
Documentation
Various wrenches
Machine feet
Pulling device
Grinding wheel protection
Splash guard housing
Other accessories on request
Price and further technical data on request
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Item number: 14-10-050
Manufacturer: Delta
Very good general condition
Machine workshop-tested
Delivery time: subject to immediate prior sale
Year of manufacture: approx. 1995
L x W x H: approx. 1200x1200x1800mm
Weight: approx. 400kg
Control: conventional
Grinding range:
Grinding length: approx. 360mm
Grinding width: approx. 155mm
Max. grinding height: approx. 280mm
Magnetic clamping surface: approx. 350x150mm
Drive power: approx. 2.2 kW
Grinding spindle speed: approx. 2840 rpm
Grinding wheel dimensions: approx. Ø 200x80x78mm
Z-feed: manual
Grinding movement: manual
Accessories:
Grinding wheel
Documentation
Various wrenches
Machine feet
Pulling device
Grinding wheel protection
Splash guard housing
Other accessories on request
Price and further technical data on request
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Delme makineleri ve sıkıcı değirmenler
Drilling capacy mild steel: 30 mmSpindle cone: MK 3Distance spindle - column: 250 mmRevs: 245 - 4000 r.p.m.Tapping capacity: M25max. drilling depth: 120 mmColumn diameter: 100 mmDistance spindle - table: 85 - 635 mmDistance spindle-base: 1.195 mmTable: 300 x 270 mmBase dimensions: 600 x 380 mmLength: 400 mmWidth: 655 mmHeight: 1185 mmWeight: 280 kg
Drilling capacy mild steel: 30 mm
Spindle cone: MK 3
Distance spindle - column: 250 mm
Revs: 245 - 4000 r.p.m.
Tapping capacity: M25
max. drilling depth: 120 mm
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.195 mm
Table: 300 x 270 mm
Base dimensions: 600 x 380 mm
Length: 400 mm
Width: 655 mm
Height: 1185 mm
Weight: 280 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Spindle cone: MK 3
Distance spindle - column: 250 mm
Revs: 245 - 4000 r.p.m.
Tapping capacity: M25
max. drilling depth: 120 mm
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.195 mm
Table: 300 x 270 mm
Base dimensions: 600 x 380 mm
Length: 400 mm
Width: 655 mm
Height: 1185 mm
Weight: 280 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
Ciltleme makineleri
Horizon BQ 470With Nordson Pur unit
Horizon BQ 470
With Nordson
Pur unit
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
With Nordson
Pur unit
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 1050 mmMax. bending capacity - mild steel: 2Upper roll diameter: 75 mmLength: 1930 mmWidth: 700 mmHeight: 1160 mmWeight: 300 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 75 mm
Length: 1930 mm
Width: 700 mm
Height: 1160 mm
Weight: 300 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 2
Upper roll diameter: 75 mm
Length: 1930 mm
Width: 700 mm
Height: 1160 mm
Weight: 300 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
6
Tipo baskı makineleri
Heidelberg SBD cilinderWith inking unit
Heidelberg SBD cilinder
With inking unit
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
With inking unit
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
12
TornalarDiğer
MEPAC PCA 01 / Abdreh - Poliermaschine-CE Kennung-Baujahr 2022-Spitzenhöhe 250mm-Dreibackenfutter 120mm-WechselbackenCaopv0E3V0-Rollbarer Unterschrank-Stufenlose Drehzahlregulierung-Drehzahlrichtung Rechts / Links-Not / AusAbmaße:LxBxH 0,8x0,9x1,5 Meter / Gewicht 100 Kg
MEPAC PCA 01 / Abdreh - Poliermaschine
-CE Kennung
-Baujahr 2022
-Spitzenhöhe 250mm
-Dreibackenfutter 120mm
-Wechselbacken
Caopv0E3V0
-Rollbarer Unterschrank
-Stufenlose Drehzahlregulierung
-Drehzahlrichtung Rechts / Links
-Not / Aus
Abmaße:
LxBxH 0,8x0,9x1,5 Meter / Gewicht 100 Kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
-CE Kennung
-Baujahr 2022
-Spitzenhöhe 250mm
-Dreibackenfutter 120mm
-Wechselbacken
Caopv0E3V0
-Rollbarer Unterschrank
-Stufenlose Drehzahlregulierung
-Drehzahlrichtung Rechts / Links
-Not / Aus
Abmaße:
LxBxH 0,8x0,9x1,5 Meter / Gewicht 100 Kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Mobile Scherenhubbühne Rothe BenkmannBauhöhe 2,6mPodesthöhe eingefahren ca. 1,6 MeterGesamthöhe ausgefahren 3,4 mTragkraft:2000kgEigengewicht 900KgTransportrollen können angebracht werden
Mobile Scherenhubbühne Rothe Benkmann
Bauhöhe 2,6m
Podesthöhe eingefahren ca. 1,6 Meter
Gesamthöhe ausgefahren 3,4 m
Tragkraft:2000kg
Eigengewicht 900Kg
Transportrollen können angebracht werden
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Bauhöhe 2,6m
Podesthöhe eingefahren ca. 1,6 Meter
Gesamthöhe ausgefahren 3,4 m
Tragkraft:2000kg
Eigengewicht 900Kg
Transportrollen können angebracht werden
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
9
TesterelerŞerit testereleri
Knuth VB 510 / Vertikalbandsäge-CE Kennung-Baujahr 2008-Bandschweißeinrichtung-Stufenlose Drehzahlregulierung-Tischabmessung 600x500mm-Arbeitsleuchte-Maschinenfüße-Diverses ZubehörAbmaße:LxBxH 1,2x0,7x2 Meter / Gewicht 500KgDrgwcd
Knuth VB 510 / Vertikalbandsäge
-CE Kennung
-Baujahr 2008
-Bandschweißeinrichtung
-Stufenlose Drehzahlregulierung
-Tischabmessung 600x500mm
-Arbeitsleuchte
-Maschinenfüße
-Diverses Zubehör
Abmaße:
LxBxH 1,2x0,7x2 Meter / Gewicht 500Kg
Drgwcd
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
-CE Kennung
-Baujahr 2008
-Bandschweißeinrichtung
-Stufenlose Drehzahlregulierung
-Tischabmessung 600x500mm
-Arbeitsleuchte
-Maschinenfüße
-Diverses Zubehör
Abmaße:
LxBxH 1,2x0,7x2 Meter / Gewicht 500Kg
Drgwcd
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Kumlama makineleriProfil taşlama makineleri
Friedrich Zimmermann PS ProfilschleifmaschineTischabmessungen: 500x500 mmBandbreite: 40 mmInkl. Posten SchleifbänderAufstellmaß ca. 950x700x1500 mmGewicht: ca. 300 kg
Friedrich Zimmermann PS Profilschleifmaschine
Tischabmessungen: 500x500 mm
Bandbreite: 40 mm
Inkl. Posten Schleifbänder
Aufstellmaß ca. 950x700x1500 mm
Gewicht: ca. 300 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Tischabmessungen: 500x500 mm
Bandbreite: 40 mm
Inkl. Posten Schleifbänder
Aufstellmaß ca. 950x700x1500 mm
Gewicht: ca. 300 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
3
TornalarTornalar
Weiler Condor / Bestzustand / DigitalanzeigeFutter / Spannzangeneinrichtung / Multifix alles neu
Weiler Condor / Bestzustand / Digitalanzeige
Futter / Spannzangeneinrichtung / Multifix alles neu
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Futter / Spannzangeneinrichtung / Multifix alles neu
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
5
TesterelerŞerit testereleri
Saw frame: Double columnBand dimensions: 5000 x 34 x 1,1 mm mmBand speed continous: 20 - 120 m/minCutting capacity 0° round: 330 mmCutting capacity 0° square: 330 mmCutting capacity 0° flat: 350 x 330 mmWorking height: 845 mmHydraulic motor: 1.1 kWMotor: 3 kWCoolant pump motor: 0.12 kWLength: 2815 mmWidth: 1935 mmHeight: 1855 mmWeight: 2560 kg
Saw frame: Double column
Band dimensions: 5000 x 34 x 1,1 mm mm
Band speed continous: 20 - 120 m/min
Cutting capacity 0° round: 330 mm
Cutting capacity 0° square: 330 mm
Cutting capacity 0° flat: 350 x 330 mm
Working height: 845 mm
Hydraulic motor: 1.1 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2815 mm
Width: 1935 mm
Height: 1855 mm
Weight: 2560 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Band dimensions: 5000 x 34 x 1,1 mm mm
Band speed continous: 20 - 120 m/min
Cutting capacity 0° round: 330 mm
Cutting capacity 0° square: 330 mm
Cutting capacity 0° flat: 350 x 330 mm
Working height: 845 mm
Hydraulic motor: 1.1 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2815 mm
Width: 1935 mm
Height: 1855 mm
Weight: 2560 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpg "İlanı göster")
8
Plastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18482Hersteller: KRAUSS MAFFEIYear of construction: 2010Clamping unitClamping force: 300 tonOpening stroke: 820 mmDistance between tie bars: 810 X 720 mmMould height min.: 480 mmOpening width: 1300 mmInjection unitScrew diameter: 60 mmInjection volume: 792 cm³Shot weight: 720 gInjection pressure: 2420 barMeasurements and weightDimensions: 6,7 X 2,1 X 2,4 mMachine weight: 16400 kgRobotProducer: Krauss Maffei Type: KM LRX S 250 Year: 2010
Ref. no.: 18482
Hersteller: KRAUSS MAFFEI
Year of construction: 2010
Clamping unit
Clamping force: 300 ton
Opening stroke: 820 mm
Distance between tie bars: 810 X 720 mm
Mould height min.: 480 mm
Opening width: 1300 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 792 cm³
Shot weight: 720 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 6,7 X 2,1 X 2,4 m
Machine weight: 16400 kg
Robot
Producer: Krauss Maffei
Type: KM LRX S 250
Year: 2010
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: KRAUSS MAFFEI
Year of construction: 2010
Clamping unit
Clamping force: 300 ton
Opening stroke: 820 mm
Distance between tie bars: 810 X 720 mm
Mould height min.: 480 mm
Opening width: 1300 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 792 cm³
Shot weight: 720 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 6,7 X 2,1 X 2,4 m
Machine weight: 16400 kg
Robot
Producer: Krauss Maffei
Type: KM LRX S 250
Year: 2010
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Plastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18481Hersteller: ARBURGYear of construction: 2004Clamping unitClamping force: 60 tonOpening stroke: 350 mmDistance between tie bars: 320 X 320 mmMould height min.: 200 mmPlaten size (h x v): 446 X 446 mmInjection unitScrew diameter: 25 mmInjection volume: 45 cm³Shot weight: 40 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,5 X 1,5 X 1,7 mMachine weight: 2330 kg
Ref. no.: 18481
Hersteller: ARBURG
Year of construction: 2004
Clamping unit
Clamping force: 60 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 200 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 45 cm³
Shot weight: 40 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 X 1,5 X 1,7 m
Machine weight: 2330 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 2004
Clamping unit
Clamping force: 60 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 200 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 45 cm³
Shot weight: 40 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 X 1,5 X 1,7 m
Machine weight: 2330 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.