3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2500 mmMax. bending capacity - mild steel: 27Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2500 mmMax. bending capacity - mild steel: 20Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2500 mmMax. bending capacity - mild steel: 14Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 14
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 14
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2500 mmMax. bending capacity - mild steel: 8Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2000 mmMax. bending capacity - mild steel: 28Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 28 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 22 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 26 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 23 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 28
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 28 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 22 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 26 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 23 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 28
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 28 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 22 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 26 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 23 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2000 mmMax. bending capacity - mild steel: 22Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 22 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 19 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 17 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 22
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 22 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 19 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 17 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 22
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 22 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 19 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 17 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2000 mmMax. bending capacity - mild steel: 18Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 18 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12.1 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 18
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 18 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12.1 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 18
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 18 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12.1 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
Sac işleme makineleriKesit çelik makaslar
Punching power: 55 tonThroat depth: 250 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40/10 mmStroke: 20 mmStrokes: 37 1/minFlat steel: 300x15 mmAngle steel: 120x10 mmRound / square steel: 40 mmNotcher: 10 mmMotor: 5 kWLength: 1670 mmWidth: 1160 mmHeight: 2090 mmWeight: 1390 kg
Punching power: 55 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Fırın, pastacılık makineleriMikserler
Morton GL55 Gridlap mixer, Stainless, gridlap mixer, variable speed, timer settings, auto tilt discharge, 3Ph
Morton GL55 Gridlap mixer, Stainless, gridlap mixer, variable speed, timer settings, auto tilt discharge, 3Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Leonhardt AG2 Twin head dosing machine, Serial: 1401449, 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph
Leonhardt AG2 Twin head dosing machine, Serial: 1401449, 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
12
Diğer
Riggs 1000 depositor, Serial: TT2446 2018, Stainless, tabletop bench fill depositor, 40L stainless hopper, 50ml to 600ml fill size, with plunger cut off valve, pneumatic, with manual, mobile
Riggs 1000 depositor, Serial: TT2446 2018, Stainless, tabletop bench fill depositor, 40L stainless hopper, 50ml to 600ml fill size, with plunger cut off valve, pneumatic, with manual, mobile
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2000 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4.5 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4.5 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4.5 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
FrezelerDiğer
X: 760 mmY: 530 mmZ: 560 mmTable size: 1200 x 500 mmSpeed range: 12.000 rpmTaper fixture: SK 40Internal coolant: 20 barTool changer: 30 -stationElectrical hand wheel: yesChip conveyor: yesControl: Siemens 828 DExhaust unit: yesWorking hour: 17.500 hTotal power: 25 kWWeight of machine: 8000 kgSpace requirement (W x D x H): 2,4 × 2,0 × 2,8 mCondition: good, few operating hours4th axis, swivel tableAccessory: documentation, no further accessories
X: 760 mm
Y: 530 mm
Z: 560 mm
Table size: 1200 x 500 mm
Speed range: 12.000 rpm
Taper fixture: SK 40
Internal coolant: 20 bar
Tool changer: 30 -station
Electrical hand wheel: yes
Chip conveyor: yes
Control: Siemens 828 D
Exhaust unit: yes
Working hour: 17.500 h
Total power: 25 kW
Weight of machine: 8000 kg
Space requirement (W x D x H): 2,4 × 2,0 × 2,8 m
Condition: good, few operating hours
4th axis, swivel table
Accessory: documentation, no further accessories
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Y: 530 mm
Z: 560 mm
Table size: 1200 x 500 mm
Speed range: 12.000 rpm
Taper fixture: SK 40
Internal coolant: 20 bar
Tool changer: 30 -station
Electrical hand wheel: yes
Chip conveyor: yes
Control: Siemens 828 D
Exhaust unit: yes
Working hour: 17.500 h
Total power: 25 kW
Weight of machine: 8000 kg
Space requirement (W x D x H): 2,4 × 2,0 × 2,8 m
Condition: good, few operating hours
4th axis, swivel table
Accessory: documentation, no further accessories
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Şekerleme makineleri
Laief GSL-14-12 Grigoli stick line, Serial: PP-11-2018, 2019, Max mechanical speed 25, number of wide 12, capacity 12/30,000, row of moulds 130, cooling CaCI2, brine holding capacity 5,000L, liquid refrigerant Freon or NH3, defrosting steam, main drive movement full servo, comes with button up fill, volumetric filler for BU, volumetric fruit filler, volumetric microfiller, 3 x volumetric fillers, flt sick inserter, round stick inserter, chewing gum stick inserter, intermedial extraction, product saving unit, 200Kg chocolate tank, chocolate dipping tank, NH3 Evaporator 200Kw, 4 sets of moulds, catwalk gantry, ask for further spec, total cost brand new £1,120,300
Laief GSL-14-12 Grigoli stick line, Serial: PP-11-2018, 2019, Max mechanical speed 25, number of wide 12, capacity 12/30,000, row of moulds 130, cooling CaCI2, brine holding capacity 5,000L, liquid refrigerant Freon or NH3, defrosting steam, main drive movement full servo, comes with button up fill, volumetric filler for BU, volumetric fruit filler, volumetric microfiller, 3 x volumetric fillers, flt sick inserter, round stick inserter, chewing gum stick inserter, intermedial extraction, product saving unit, 200Kg chocolate tank, chocolate dipping tank, NH3 Evaporator 200Kw, 4 sets of moulds, catwalk gantry, ask for further spec, total cost brand new £1,120,300
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Aksesuarlar ve yedek parçalar
Ceia THS Metal detector checkweigher, Stainless metal detector checkweigher, aperture 340mm x 100mm, checkweigher platform 420mm x 290mm, with blow off reject into reject bins, with printer, mobile, 1Ph
Ceia THS Metal detector checkweigher, Stainless metal detector checkweigher, aperture 340mm x 100mm, checkweigher platform 420mm x 290mm, with blow off reject into reject bins, with printer, mobile, 1Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Paketleme makineleri
Robopac Ariane 6050/2TA Lsealer shrink tunnel KN055476 L sealer sealing bars 600mm x 500mm, into shrink tunnel aperture 450mm x 200mm, adjustable controls, mobile, 3Ph
Robopac Ariane 6050/2TA Lsealer shrink tunnel KN055476 L sealer sealing bars 600mm x 500mm, into shrink tunnel aperture 450mm x 200mm, adjustable controls, mobile, 3Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
12
TesterelerKesme testereleri
Cutting diameter: 175 mmSaw blade dimensions: bore 30, min. 450, max. 550 mmSpeed range: 2800 rpmWorking height: 820 mmSuction stub: 1 x 120 - 1 x 150Total power: 5,5 kWWeight of machine: 400 kgSpace requirement (W x D x H): 1,4 x 1,0 x 1,8 mCondition: sehr gutRoller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabledAccessory: documentation
Cutting diameter: 175 mm
Saw blade dimensions: bore 30, min. 450, max. 550 mm
Speed range: 2800 rpm
Working height: 820 mm
Suction stub: 1 x 120 - 1 x 150
Total power: 5,5 kW
Weight of machine: 400 kg
Space requirement (W x D x H): 1,4 x 1,0 x 1,8 m
Condition: sehr gut
Roller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabled
Accessory: documentation
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Saw blade dimensions: bore 30, min. 450, max. 550 mm
Speed range: 2800 rpm
Working height: 820 mm
Suction stub: 1 x 120 - 1 x 150
Total power: 5,5 kW
Weight of machine: 400 kg
Space requirement (W x D x H): 1,4 x 1,0 x 1,8 m
Condition: sehr gut
Roller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabled
Accessory: documentation
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 1500 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Bending length: 1500 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
Plastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18409Hersteller: ARBURGYear of construction: 2003Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 320 x 320 mmMould height min.: 200 mmOpening width: 550 mmPlaten size (h x v): 446 X 446 mmInjection unitScrew diameter: 25 mmInjection volume: 54 cm³Shot weight: 49 gInjection pressure: 2500 barMeasurements and weightDimensions: 3.25 x 1.15 x 2,0 mMachine weight: 2250 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18409
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 200 mm
Opening width: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3.25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 200 mm
Opening width: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3.25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Plastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18404Hersteller: ARBURGYear of construction: 2001Clamping unitClamping force: 130 tonOpening stroke: 500 mmDistance between tie bars: 420 x420 mmMould height min.: 250 mmOpening width: 750 mmPlaten size (h x v): 605 x 605 mmInjection unitScrew diameter: 45 mmInjection volume: 230 cm³Shot weight: 210 gInjection pressure: 1670 barMeasurements and weightDimensions: 4,68 x 1,3 x 2,2 mMachine weight: 5100 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar
Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar
Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
-1_thumb.jpeg "İlanı göster")
-3_thumb.jpeg "İlanı göster")
-4_thumb.jpeg "İlanı göster")
-5_thumb.jpeg "İlanı göster")
-6_thumb.jpeg "İlanı göster")
-7_thumb.jpeg "İlanı göster")
-8_thumb.jpeg "İlanı göster")
7
Etiket baskı ve kalıp kesme makinesi
Gietz FSA 720Year 1988
Gietz FSA 720
Year 1988
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Year 1988
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
-1_thumb.jpg "İlanı göster")
-2_thumb.jpg "İlanı göster")
-3_thumb.jpg "İlanı göster")
-4_thumb.jpg "İlanı göster")
-5_thumb.jpg "İlanı göster")
5
Kesme makineleri
Polar 155 ED papercutterchrome tableComplete with:Unloader Knorrjogger with pressing roller knorrLift
Polar 155 ED papercutter
chrome table
Complete with:
Unloader Knorr
jogger with pressing roller knorr
Lift
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
chrome table
Complete with:
Unloader Knorr
jogger with pressing roller knorr
Lift
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
4
Baskı sonrası makineleriCiltleme makineleri
Renz AP 300 compact Wiro punching machineYear 2019
Renz AP 300 compact
Wiro punching machine
Year 2019
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Wiro punching machine
Year 2019
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Fırın, pastacılık makineleriKesme makineleri
Kaufler KR370 Slicer, Serial: 1210103, 2022, Stainless, The Kerslicer range of pendula action slicers offers a slicer/applicator for either online or offline slicing with the possibility for targeting of products, shingled, stacked or just continuous production, slicing thickness from 0mm - 10mm, capacity up to 120 strokes per minute, mobile, 3Ph
Kaufler KR370 Slicer, Serial: 1210103, 2022, Stainless, The Kerslicer range of pendula action slicers offers a slicer/applicator for either online or offline slicing with the possibility for targeting of products, shingled, stacked or just continuous production, slicing thickness from 0mm - 10mm, capacity up to 120 strokes per minute, mobile, 3Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
SF Engineering Stainless conveyor, Serial: 636714757, 2014, stainless conveyor, intralox belt, side guides, variable speed, belt dimensions 2400mm x 400mm, mobile, 3Ph
SF Engineering Stainless conveyor, Serial: 636714757, 2014, stainless conveyor, intralox belt, side guides, variable speed, belt dimensions 2400mm x 400mm, mobile, 3Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Sac işleme makineleriDöner bükme makineleri
Bending length: 1050 mmSheet thickness (420 N/mm²): 1.5 mmMax. thickness - stainless steel: 1 mmMax. thickness - aluminium: 2.2 mmMax. bending angle: 150 °Back gauge manual: 500 mmMax. opening width without tools: 200 mmUpper tool: sectioned, 45°Bending flange: adjustment 35 mmLength: 1300 mmWidth: 750 mmHeight: 1515 mmWeight: 280 kg
Bending length: 1050 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2000 mmMax. bending capacity - mild steel: 11Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mmUpper roll diameter: 225 mmLower roll diameter: 215 mmLateral roll diameter: 165 mmBending speed: 8 m/minLength: 3950 mmWidth: 1200 mmHeight: 1200 mmWeight: 4450 kg
Bending length: 2000 mm
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
5
Sac işleme makineleriYuvarlak çekme makineleri
Bending length: 2050 mmMax. bending capacity - mild steel: 4Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mmUpper roll diameter: 130 mmLower roll diameter: 130 mmLateral roll diameter: 130 mmBending speed: 5 m/minMotor power: 2,2 + 1,1 kWLength: 3800 mmWidth: 1150 mmHeight: 1110 mmWeight: 2450 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
Tipo baskı makineleri
Heidelberg windmillMachine size 26x38cmWeight 600gsmSpeed 5000 sheets/hWeight 1400kgPower supply 400V
Heidelberg windmill
Machine size 26x38cm
Weight 600gsm
Speed 5000 sheets/h
Weight 1400kg
Power supply 400V
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Machine size 26x38cm
Weight 600gsm
Speed 5000 sheets/h
Weight 1400kg
Power supply 400V
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Baskı sonrası makineleriDiğer
Samson 104 L pileturnerLift capacity 1000 kg.Min. pile height 320 mm (Including pallet).Max. Pile height 1300 mm (Including pallet).Min. paper size 450 mm x 320 mmMax. Paper size 1200 mm x 800 mmPower 400volts 3 phaseWeight: 725 kg
Samson 104 L pileturner
Lift capacity 1000 kg.
Min. pile height 320 mm (Including pallet).
Max. Pile height 1300 mm (Including pallet).
Min. paper size 450 mm x 320 mm
Max. Paper size 1200 mm x 800 mm
Power 400volts 3 phase
Weight: 725 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Lift capacity 1000 kg.
Min. pile height 320 mm (Including pallet).
Max. Pile height 1300 mm (Including pallet).
Min. paper size 450 mm x 320 mm
Max. Paper size 1200 mm x 800 mm
Power 400volts 3 phase
Weight: 725 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Atkılama makineleri
De Witt bandding deviceMax size: 86 x 60 cmFully automatic, or food paddle operatedWith two extra coils of strapping band
De Witt bandding device
Max size: 86 x 60 cm
Fully automatic, or food paddle operated
With two extra coils of strapping band
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Max size: 86 x 60 cm
Fully automatic, or food paddle operated
With two extra coils of strapping band
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriEvrensel kilit şekillendirme makineleri
Max. thickness - mild steel: 1.5 mmMotor power: 2 kWWorking height: 845 mmLength: 1660 mmWidth: 480 mmHeight: 1010 mmWeight: 326 kg
Max. thickness - mild steel: 1.5 mm
Motor power: 2 kW
Working height: 845 mm
Length: 1660 mm
Width: 480 mm
Height: 1010 mm
Weight: 326 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Motor power: 2 kW
Working height: 845 mm
Length: 1660 mm
Width: 480 mm
Height: 1010 mm
Weight: 326 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
pressing capacity: 150 toCylinder fix or moveable: fixBending length: 1000 mmStroke: 300 mmDistance between columns: 1020 mmDistance between table and toolholder: 610 mmRapid speed: 9 mm/sWorking speed: 5 mm/sRetraction speed: 10 mm/sMax. bending capacity (mild steel): 8 mmTable: 600x1020 mmHole in table: 100 mmHole distance: 190 mmLength: 2110 mmWidth: 1000 mmHeight: 2450 mmWeight: 2400 kg
pressing capacity: 150 to
Cylinder fix or moveable: fix
Bending length: 1000 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Cylinder fix or moveable: fix
Bending length: 1000 mm
Stroke: 300 mm
Distance between columns: 1020 mm
Distance between table and toolholder: 610 mm
Rapid speed: 9 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Table: 600x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Swing over bed: 760 mmDistance between centers: 3000 mmCentre height: 380 mmSpindle bore: 132 mmswing over cross slide: 520 mmWidth of bed: 560 mmSpindle nose / DIN55027: 11Spindle taper: 140 MSpindle speed steps: 17Spindle revs: 7,5 - 1015 rpmNumber of feeds: 150Longitudinal feed range: 0.039 - 18 mm/rCross feed range: 0.02 - 9 mm/rMetric thread range: 0.5 - 180 mmInch thread range: 60 - 1/6 TpiModule thread range: 0.125 - 45DP thread range: ArrayCross slide travel: 410 mmTop slide travel: 150 mmTailstock quill diameter: 105 mmTailstock quill taper: 6 MKTailstock travel: 225 mmMotor power: 15 kWWeight: 4470 kg
Swing over bed: 760 mm
Distance between centers: 3000 mm
Centre height: 380 mm
Spindle bore: 132 mm
swing over cross slide: 520 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: 7,5 - 1015 rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: Array
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4470 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Distance between centers: 3000 mm
Centre height: 380 mm
Spindle bore: 132 mm
swing over cross slide: 520 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: 7,5 - 1015 rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: Array
Cross slide travel: 410 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4470 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
Delme makineleri ve sıkıcı değirmenler
Drilling capacy mild steel: 50 mmSpindle cone: MK 5Distance spindle - column: 360 – 1.250 mmRevs: 44 – 1.206 (12) r.p.m.Tapping capacity: Steel/Cast: M40/M50Distance table - spindle underside: 441 – 1.345 mmautomatic feed: 0,06 – 0,2 (3) mm/minSpindle motor: 3.7 kWColumn diameter: 300 mmQuill travel: 270 mmTable: 1.785 x 785 x 190 mmBox table dimensions: 635 x 520 x 420 mmmax. height: 2645 mmLength: 2060 mmWidth: 995 mmHeight: 2240 mmWeight: 2300 kg
Drilling capacy mild steel: 50 mm
Spindle cone: MK 5
Distance spindle - column: 360 – 1.250 mm
Revs: 44 – 1.206 (12) r.p.m.
Tapping capacity: Steel/Cast: M40/M50
Distance table - spindle underside: 441 – 1.345 mm
automatic feed: 0,06 – 0,2 (3) mm/min
Spindle motor: 3.7 kW
Column diameter: 300 mm
Quill travel: 270 mm
Table: 1.785 x 785 x 190 mm
Box table dimensions: 635 x 520 x 420 mm
max. height: 2645 mm
Length: 2060 mm
Width: 995 mm
Height: 2240 mm
Weight: 2300 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Spindle cone: MK 5
Distance spindle - column: 360 – 1.250 mm
Revs: 44 – 1.206 (12) r.p.m.
Tapping capacity: Steel/Cast: M40/M50
Distance table - spindle underside: 441 – 1.345 mm
automatic feed: 0,06 – 0,2 (3) mm/min
Spindle motor: 3.7 kW
Column diameter: 300 mm
Quill travel: 270 mm
Table: 1.785 x 785 x 190 mm
Box table dimensions: 635 x 520 x 420 mm
max. height: 2645 mm
Length: 2060 mm
Width: 995 mm
Height: 2240 mm
Weight: 2300 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
14
Et işleme makineleri
Elanco STI 10 Capsule filler, Stainless, capsule filling machine, semi automatic, up to 25,000 capsules per hour, comes with a counter, vacuum, variable speed, and two boxes of cap rings and body rings for different sizes, with manual, 3Ph
Elanco STI 10 Capsule filler, Stainless, capsule filling machine, semi automatic, up to 25,000 capsules per hour, comes with a counter, vacuum, variable speed, and two boxes of cap rings and body rings for different sizes, with manual, 3Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Fırın, pastacılık makineleriMikserler
NNP Ribbon blender, 300Kg stainless ribbon blender, 4Kw motor, central bottom discharge door, safety mesh and lid, 3Ph
NNP Ribbon blender, 300Kg stainless ribbon blender, 4Kw motor, central bottom discharge door, safety mesh and lid, 3Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Et işleme makineleri
AT Sack fillers Midget Linear weigher and filler, Serial: 08MM-3-22, Semi automatic single head linear gross weighing and filling machine, weight range 20g - 6Kgs, up to 1000Kgs per hour, compact design, simple to set up, ideal for packing granules, flakes, pellets, beads and much more, 1Ph
AT Sack fillers Midget Linear weigher and filler, Serial: 08MM-3-22, Semi automatic single head linear gross weighing and filling machine, weight range 20g - 6Kgs, up to 1000Kgs per hour, compact design, simple to set up, ideal for packing granules, flakes, pellets, beads and much more, 1Ph
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Etiket baskı ve kalıp kesme makinesi
Simplacutter / cauhe hand fed platenFormat 70 x100Pneumatic clutchManual, automatic or timed operation
Simplacutter / cauhe hand fed platen
Format 70 x100
Pneumatic clutch
Manual, automatic or timed operation
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Format 70 x100
Pneumatic clutch
Manual, automatic or timed operation
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Kesme makineleri
Polar 78 es papercutterYear: 2002Chrome table with airSide tables: 2 x 0,75m2 resopal with airMachine is in good condition complete with all tools and spare knife
Polar 78 es papercutter
Year: 2002
Chrome table with air
Side tables: 2 x 0,75m2 resopal with air
Machine is in good condition complete with all tools and spare knife
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Year: 2002
Chrome table with air
Side tables: 2 x 0,75m2 resopal with air
Machine is in good condition complete with all tools and spare knife
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
Nagel citoborma 2802 head drilling machine
Nagel citoborma 280
2 head drilling machine
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2 head drilling machine
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Tipo baskı makineleri
Heidelberg KSB cilinderFormat 40x57 cm
Heidelberg KSB cilinder
Format 40x57 cm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Format 40x57 cm
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
14
Kumlama makineleriİç taşlama makineleri
Internal grinding diameter min.: 1 mmInternal grinding diameter max: 50 mmGrinding length: 200 mmCentre height: 132 mmTool spindle speed: 150 - 1.500 rpmTable speed: continuous adjustment up to 10Dressing device: yesSpindle speed: 16.500 - 120.000 rpmInternal grinding spindle: 16.500, 22.000, 33.000 rpmPaper belt filter: yesTotal power: 3 kWWeight of machine: 2000 kgSpace requirement (W x D x H): 1,8 x 1,1 x 1,8 mCondition: goodWell-maintained machine from a German automobile manufacturerAccessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
Internal grinding diameter min.: 1 mm
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good
Well-maintained machine from a German automobile manufacturer
Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good
Well-maintained machine from a German automobile manufacturer
Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Sac işleme makineleriKesit çelik makaslar
Punching power: 60 tonThroat depth: 250 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40 x 11 mmStrokes: 32 1/minFlat steel: 350 x 15 mmAngle steel: 120 x 10 mmRound / square steel: 45 / 40 mmNotcher: 10 mmBending unit: max. 150x10 mmMotor: 5.5 kWLength: 1850 mmWidth: 1300 mmHeight: 2100 mmWeight: 1390 kg
Punching power: 60 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
Delme makineleri ve sıkıcı değirmenler
Drilling capacy mild steel: 40 mmSpindle cone: MK 4Revs: 38 - 1.270 (9) r.p.m.Tapping capacity: M32Feeds: 0,10 - 0,40 (4) mm/rLength: 550 mmWidth: 950 mmHeight: 2363 mmWeight: 640 kg
Drilling capacy mild steel: 40 mm
Spindle cone: MK 4
Revs: 38 - 1.270 (9) r.p.m.
Tapping capacity: M32
Feeds: 0,10 - 0,40 (4) mm/r
Length: 550 mm
Width: 950 mm
Height: 2363 mm
Weight: 640 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Spindle cone: MK 4
Revs: 38 - 1.270 (9) r.p.m.
Tapping capacity: M32
Feeds: 0,10 - 0,40 (4) mm/r
Length: 550 mm
Width: 950 mm
Height: 2363 mm
Weight: 640 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
PreslerDeneme presleri
pressing capacity: 40 toCylinder fix or moveable: fixStroke: 350 mmDistance between columns: 900 mmRapid speed: 29 mm/sWorking speed: 5 mm/sLength: 1600 mmWidth: 700 mmHeight: 2050 mmWeight: 430 kg
pressing capacity: 40 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 900 mm
Rapid speed: 29 mm/s
Working speed: 5 mm/s
Length: 1600 mm
Width: 700 mm
Height: 2050 mm
Weight: 430 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 900 mm
Rapid speed: 29 mm/s
Working speed: 5 mm/s
Length: 1600 mm
Width: 700 mm
Height: 2050 mm
Weight: 430 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
PreslerDeneme presleri
pressing capacity: 20 toCylinder fix or moveable: fixStroke: 350 mmDistance between columns: 520 mmWorking speed: 4 mm/sRetraction speed: 30 mm/sLength: 1200 mmWidth: 500 mmHeight: 1800 mmWeight: 210 kg
pressing capacity: 20 to
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 520 mm
Working speed: 4 mm/s
Retraction speed: 30 mm/s
Length: 1200 mm
Width: 500 mm
Height: 1800 mm
Weight: 210 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Cylinder fix or moveable: fix
Stroke: 350 mm
Distance between columns: 520 mm
Working speed: 4 mm/s
Retraction speed: 30 mm/s
Length: 1200 mm
Width: 500 mm
Height: 1800 mm
Weight: 210 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
pressing capacity: 150 toCylinder fix or moveable: horizontal moveableStroke: 300 mmDaylight: 750 mmDistance between columns: 1570 mmPiston diameter: 280x200 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 2560 mmWidth: 1000 mmHeight: 2480 mmWeight: 2350 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Daylight: 750 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2350 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Daylight: 750 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2350 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
pressing capacity: 30 toCylinder fix or moveable: horizontal moveableStroke: 200 mmDistance between columns: 775 mmPiston diameter: 125x80 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 1500 mmWidth: 700 mmHeight: 1800 mmWeight: 400 kg
pressing capacity: 30 to
Cylinder fix or moveable: horizontal moveable
Stroke: 200 mm
Distance between columns: 775 mm
Piston diameter: 125x80 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 1800 mm
Weight: 400 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Cylinder fix or moveable: horizontal moveable
Stroke: 200 mm
Distance between columns: 775 mm
Piston diameter: 125x80 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 1500 mm
Width: 700 mm
Height: 1800 mm
Weight: 400 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
Sac işleme makineleriDöner bükme makineleri
Bending length: 6400 mmBending capacity steel 400 N/mm²: 1.5 mmBending capacity Alu 190 N/mm²: 2 mmNo. of stand and tension arm units: 6
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 6
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 6
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.