Arama terimi için kullanılmış makineler: MAS (3312)

Ref. no.: 17540Manufacturer: ARBURGYear of construction: 1994Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 270 X 270 mmMould height min.: 200 mmPlaten size (h x v): 405 X405 mmInjection unitScrew diameter: 25 mmInjection volume: 67 cm³Shot weight: 61 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,3 X 1,5 X 2,0 mMachine weight: 2400 kgFurther information:Laboratory Machine with Exceptionally Low Operating HoursThe offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.The control system shows only approximately 100 operating hours and just 867 machine cycles.The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Ref. no.: 17540
Manufacturer: ARBURG
Year of construction: 1994

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg

Further information:
Laboratory Machine with Exceptionally Low Operating Hours

The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.

The control system shows only approximately 100 operating hours and just 867 machine cycles.

The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes.

The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications.

Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.

Metal işleme ve takım tezgahlarıSac işleme makineleriLevha makasları

Hydraulic plate shear HACO HSLX 3006

HACO HSLX 3006

HESSE+CO Maschinenfabrik GmbH
1992
kullanılmış

17.800 EUR
Sabit fiyat

Talep gönder

Cutting length: 3050 mmMax. thickness - mild steel: 6 mmStrokes: 11 - 25 1/minCutting angle: 0.5 - 3 °Number of downholders: 18 pcs.Back gauge: 750 mmMotor power: 11 kWWorking height: 770 mmLength: 3850 mmWidth: 1750 mmHeight: 1720 mmWeight: 4600 kg

Cutting length: 3050 mm
Max. thickness - mild steel: 6 mm
Strokes: 11 - 25 1/min
Cutting angle: 0.5 - 3 °
Number of downholders: 18 pcs.
Back gauge: 750 mm
Motor power: 11 kW
Working height: 770 mm
Length: 3850 mm
Width: 1750 mm
Height: 1720 mm
Weight: 4600 kg

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.

Metal işleme ve takım tezgahlarıSac işleme makineleriLevha makasları

Motorized plate shear HESSE by DURMA MS 1303

HESSE by DURMA MS 1303

HESSE+CO Maschinenfabrik GmbH
2026
yeni

14.400 EUR
Sabit fiyat

Talep gönder

Cutting length: 1350 mmMax. thickness - mild steel: 3 mmStrokes: 35 1/minBack gauge: 550 mmMotor power: 3 kWSupport arms: 2 pcs.Table height: 850 mmTable width: 400 mmLength: 1900 mmWidth: 1350 mmHeight: 1260 mmWeight: 1060 kg

Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1900 mm
Width: 1350 mm
Height: 1260 mm
Weight: 1060 kg

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.

Metal işleme ve takım tezgahlarıPreslerDeneme presleri

Hydraulic workshop press SICMI PBM 100 MC

SICMI PBM 100 MC

HESSE+CO Maschinenfabrik GmbH
yeni

31.200 EUR
Sabit fiyat

Talep gönder

pressing capacity: 100 toCylinder fix or moveable: horizontal moveableStroke: 500 mmDaylight: 700 mmDistance between columns: 1550 mmRapid speed: 25 mm/sWorking speed: 2 mm/sLength: 2400 mmWidth: 1200 mmHeight: 2450 mmWeight: 1960 kg

pressing capacity: 100 to
Cylinder fix or moveable: horizontal moveable
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 1550 mm
Rapid speed: 25 mm/s
Working speed: 2 mm/s
Length: 2400 mm
Width: 1200 mm
Height: 2450 mm
Weight: 1960 kg

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.

Metal işleme ve takım tezgahlarıSac işleme makineleri

Hydraulic portal straightening press SICMI PMM 200

SICMI PMM 200 MD

HESSE+CO Maschinenfabrik GmbH
yeni

92.000 EUR
Sabit fiyat

Talep gönder

pressing capacity: 200 toStroke: 500 mmTable: 2.500 x 2.050 mmDaylight: 800 mmRapid speed: 20 mm/sWorking speed: 2 mm/sCylinder fix or moveable: horizontal moveableDistance between columns: 2050 mmHorizontal movable cylinder: 1450 mmHydraulicaly movable stand: 1600 mmLength: 2950 mmWidth: 2500 mmHeight: 2600 mmWeight: 6500 kg

pressing capacity: 200 to
Stroke: 500 mm
Table: 2.500 x 2.050 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2050 mm
Horizontal movable cylinder: 1450 mm
Hydraulicaly movable stand: 1600 mm
Length: 2950 mm
Width: 2500 mm
Height: 2600 mm
Weight: 6500 kg

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.

Metal işleme ve takım tezgahlarıSac işleme makineleriMakas presler

Hydraulic CNC press brake HESSE by DURMA AD-S 3013

HESSE by DURMA AD-S 30135

HESSE+CO Maschinenfabrik GmbH
2026
yeni

Fiyat talep et

pressing capacity: 135 toBending length: 3050 mmAxes: Y1 / Y2 / X axisStroke: 265 mmInside distance between side frames: 2600 mmGap in side frame: 450 mmDaylight: 530 mmPower concept: hydraulicrapid speed Y-axis: 160 mm/sWorking speed Y-axis: 10Retractionspeed Y-axis: 120Back gauge travel X-axis: 500 mmBack gauge speed X-axis: 500Back gauge speed R-axis: 350 mm/sBack gauge travel R-axis: 250 mmTable height: 900 mmOiltank: 150 lMotor power: 15 kWLength: 4250 mmWidth: 1700 mmHeight: 2850 mmWeight: 9580 kg

pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge travel X-axis: 500 mm
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2850 mm
Weight: 9580 kg

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.