Lütfen bekleyin...

2
Metal işleme ve takım tezgahlarıAksesuarlar ve yedek parçalarSıkıştırma açıları

Aufspannwinkel

Breite: 1300 mmHöhe: 2500 mmTiefe: 1300 mmStärke der Aufspannplatte: 50 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Breite: 1300 mm
Höhe: 2500 mm
Tiefe: 1300 mm
Stärke der Aufspannplatte: 50 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Metal işleme ve takım tezgahlarıAksesuarlar ve yedek parçalarSıkma masaları

Aufspanntisch

Tischlänge: 1300 mmTischbreite: 550 mmDicke: 170 mmAnzahl der T-Nuten: 5T-Nuten - Breite: 18 mmT-Nuten - Abstand: 110 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: mTischbelastung: t
Tischlänge: 1300 mm
Tischbreite: 550 mm
Dicke: 170 mm
Anzahl der T-Nuten: 5
T-Nuten - Breite: 18 mm
T-Nuten - Abstand: 110 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Tischbelastung: t


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Metal işleme ve takım tezgahlarıAksesuarlar ve yedek parçalarİşaretleme plakaları

Anreißplatte

1000x1008x130
Tischlänge: 1000 mmTischbreite: 1008 mmTischhöhe: 130 mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: . tRaumbedarf ca.: . m
Tischlänge: 1000 mm
Tischbreite: 1008 mm
Tischhöhe: 130 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Baskı makineleriBaskı sonrası makineleriKazık kaldırıcılar

Polar LW 1000-4 lift

Polar LW 1000-4 EV
Polar LW 1000-4 EV lift Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.Customer benefitsIncreases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading proceduresLifting heavy loads is reduced to a minimumOperator's productivity curve remains constantSubstantial reduction of occupational diseasesTechnical dataPallet size : max.800 × 1,200 mm (31.50 × 47.24 in)Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)Stroke : max.850 mm (33.46 in)Lifting height : max. 85 cmCarrying capacity : max.1,000 kg (2,205 lbs)Net weight : 550 kgFloor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)Power : 0,75 kW
Polar LW 1000-4 EV lift

Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)

The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.

Customer benefits

Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures

Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant

Substantial reduction of occupational diseases

Technical data

Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)

Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)

Stroke : max.850 mm (33.46 in)

Lifting height : max. 85 cm

Carrying capacity : max.1,000 kg (2,205 lbs)

Net weight : 550 kg

Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)

Power : 0,75 kW


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
6
Baskı makineleriDiğer

Foamboard cutter

Neolt Electirc foam trim Plus 250
Neolt EL F Tr plus 250 foamcutterModel 250Maximum cutting length (cm) 250Length (cm) 305Width (cm) 258Height with stand (cm) 315Weight (Kg) 130Allowed media FOAM, SEMI-HARDBOARD
Neolt EL F Tr plus 250 foamcutter

Model 250
Maximum cutting length (cm) 250
Length (cm) 305
Width (cm) 258
Height with stand (cm) 315
Weight (Kg) 130
Allowed media FOAM, SEMI-HARDBOARD



İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Metal işleme ve takım tezgahlarıKumlama makineleriYüzey taşlama makineleri

ELB-SCHLIFF SWH 4 VA I surface grinding machine

ELB-SCHLIFF SWH 4 VA I
Grinding length: 400 mmGrinding width: 200 mmTable size: 450 x 200 mmTable speed: 1 - 25Magnetic table: 450 x 200 mmGrinding wheel dimensions: 250 x 25 mmSpindle speed: 1.300 / 2.600 rpmCoolant system: jaTotal power: 4,5 kWWeight of machine: 1900 kgSpace requirement (W x D x H): 1,9 x 1,5 x 2,45 mCondition: einsatzbereitno automatic deliveryAccessory: Documentation, circuit diagram
Grinding length: 400 mm
Grinding width: 200 mm
Table size: 450 x 200 mm
Table speed: 1 - 25
Magnetic table: 450 x 200 mm
Grinding wheel dimensions: 250 x 25 mm
Spindle speed: 1.300 / 2.600 rpm
Coolant system: ja
Total power: 4,5 kW
Weight of machine: 1900 kg
Space requirement (W x D x H): 1,9 x 1,5 x 2,45 m
Condition: einsatzbereit

no automatic delivery

Accessory: Documentation, circuit diagram

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
Baskı makineleriOfset baskı makineleri10 renk

Computerized High Speed Rotogravure Printing Machi

Wordly WRP-HI
worldly
2024
yeni
Fiyat talep et
In pursuit of efficient high quality printing machinery, Worldly develops machines featuring user friendly automatic operation and high stability of mechanical equipment made by specialized technology and deliberate design. Throughout the use of a central control system, including PLC control, human-machine touch screen interface and automatic alarm systems, technical operators can easily and accurately monitor the required printing quality. The splicing design is a collaboration of vertical and horizontal movement splicers, combined with tracking pressure rollers this design insures accurate and stable splicing. An Eco- Friendly Exhaust Heat Recycling system is specially built into the design, reducing high amounts of energy costs and also helps save the environmental at the same time.Ink resistance material of furnishing roller optimized ink circulation, avoid cylinder cell ink stock and improve printing quality. The roller driven by motorized can manual or automatic mode synchronized with printing speed.Quick change over doctor blade holder designDoctor blade quick locking by tool-less. The group allows horizontal, vertical and angular adjustment for the doctor blade position on engraved cylinder.Heating recycling energy savingHeating recycling & energy saving : Exclusive energy-saving design to increase the recycling benefit of investment costs. The system is constructed of connection ducts, ventilation modules, hood drying chambers, and central exhaust system. Recycle waste hot air to save energy consumption.Centralized control system allow man power savingCentralized control system integrated operator HMI, web video monitor, and color registration panel for easy access working parameter and man power saving. Automatic longitudinal and side-lay register control system. High flexibility master mark setting. Also able to save various parameter conditions to job memory.Latest E.L.S technologyAll unwinder, in-feed unit, printing units, out-feed unit,, rewinder are individually driven by AC servo motors and drives. The cylinder has direct driven to optimized the ransmission with low mechanical loss. Whole machine automation and tension controlled by high performance PLC system.SpecificationsModel WRP-HIMaximum Machine Speed 270 m/minPrinting Maximum Speed 250 m/minPrinting Width 1000 mm / 1200 mm / 1300 mmPrinting Cylinder 350 mm - 900 mmMaterial Diameter Ø800 mm / Ø1000 mmApplicationsPET, CPP, PVC,OPP, PP, PE, Nylon, Aluminum Foil, Paper.
In pursuit of efficient high quality printing machinery, Worldly develops machines featuring user friendly automatic operation and high stability of mechanical equipment made by specialized technology and deliberate design. Throughout the use of a central control system, including PLC control, human-machine touch screen interface and automatic alarm systems, technical operators can easily and accurately monitor the required printing quality. The splicing design is a collaboration of vertical and horizontal movement splicers, combined with tracking pressure rollers this design insures accurate and stable splicing. An Eco- Friendly Exhaust Heat Recycling system is specially built into the design, reducing high amounts of energy costs and also helps save the environmental at the same time.


Ink resistance material of furnishing roller optimized ink circulation, avoid cylinder cell ink stock and improve printing quality. The roller driven by motorized can manual or automatic mode synchronized with printing speed.


Quick change over doctor blade holder design
Doctor blade quick locking by tool-less. The group allows horizontal, vertical and angular adjustment for the doctor blade position on engraved cylinder.


Heating recycling energy saving
Heating recycling & energy saving : Exclusive energy-saving design to increase the recycling benefit of investment costs. The system is constructed of connection ducts, ventilation modules, hood drying chambers, and central exhaust system. Recycle waste hot air to save energy consumption.


Centralized control system allow man power saving
Centralized control system integrated operator HMI, web video monitor, and color registration panel for easy access working parameter and man power saving. Automatic longitudinal and side-lay register control system. High flexibility master mark setting. Also able to save various parameter conditions to job memory.


Latest E.L.S technology
All unwinder, in-feed unit, printing units, out-feed unit,, rewinder are individually driven by AC servo motors and drives. The cylinder has direct driven to optimized the ransmission with low mechanical loss. Whole machine automation and tension controlled by high performance PLC system.

Specifications
Model WRP-HI
Maximum Machine Speed 270 m/min
Printing Maximum Speed 250 m/min
Printing Width 1000 mm / 1200 mm / 1300 mm
Printing Cylinder 350 mm - 900 mm
Material Diameter Ø800 mm / Ø1000 mm
Applications
PET, CPP, PVC,OPP, PP, PE, Nylon, Aluminum Foil, Paper.

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Metal işleme ve takım tezgahlarıSac işleme makineleriBükme makineleri

Horizontalbiegemaschine HESSE by LFSS HP 10

HESSE by LFSS HP 10
pressing capacity: 10 toStroke: 185 mmMax. bending capacity - mild steel: 150x8 mmTable: 450x900 mmHeight of pins: 150 mmPin diameter: 60 mmWorking speed: 10 mm/minReturn speed: 10 mm/minMotor: 1.1 kWWorking height: 915 mmLength: 900 mmWidth: 450 mmHeight: 1130 mmWeight: 250 kg
pressing capacity: 10 to
Stroke: 185 mm
Max. bending capacity - mild steel: 150x8 mm
Table: 450x900 mm
Height of pins: 150 mm
Pin diameter: 60 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 1.1 kW
Working height: 915 mm
Length: 900 mm
Width: 450 mm
Height: 1130 mm
Weight: 250 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Metal işleme ve takım tezgahlarıFrezelerDiğer

QUASER MV154 milling machine cnc

QUASER MV154
X: 760 mmY: 530 mmZ: 560 mmTable size: 1200 x 500 mmSpeed range: 12.000 rpmTaper fixture: SK 40Internal coolant: 20 barTool changer: 30 -stationElectrical hand wheel: yesChip conveyor: yesControl: Siemens 828 DExhaust unit: yesWorking hour: 17.500 hTotal power: 25 kWWeight of machine: 8000 kgSpace requirement (W x D x H): 2,4 × 2,0 × 2,8 mCondition: good, few operating hours4th axis, swivel tableAccessory: documentation, no further accessories
X: 760 mm
Y: 530 mm
Z: 560 mm
Table size: 1200 x 500 mm
Speed range: 12.000 rpm
Taper fixture: SK 40
Internal coolant: 20 bar
Tool changer: 30 -station
Electrical hand wheel: yes
Chip conveyor: yes
Control: Siemens 828 D
Exhaust unit: yes
Working hour: 17.500 h
Total power: 25 kW
Weight of machine: 8000 kg
Space requirement (W x D x H): 2,4 × 2,0 × 2,8 m
Condition: good, few operating hours

4th axis, swivel table

Accessory: documentation, no further accessories

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Gıda makineleriŞekerleme makineleri

LAIEF GSL-14-12 GRIGOLI STICK LINE

Laief GSL-14-12 Grigoli stick line, Serial: PP-11-2018, 2019, Max mechanical speed 25, number of wide 12, capacity 12/30,000, row of moulds 130, cooling CaCI2, brine holding capacity 5,000L, liquid refrigerant Freon or NH3, defrosting steam, main drive movement full servo, comes with button up fill, volumetric filler for BU, volumetric fruit filler, volumetric microfiller, 3 x volumetric fillers, flt sick inserter, round stick inserter, chewing gum stick inserter, intermedial extraction, product saving unit, 200Kg chocolate tank, chocolate dipping tank, NH3 Evaporator 200Kw, 4 sets of moulds, catwalk gantry, ask for further spec, total cost brand new £1,120,300
Laief GSL-14-12 Grigoli stick line, Serial: PP-11-2018, 2019, Max mechanical speed 25, number of wide 12, capacity 12/30,000, row of moulds 130, cooling CaCI2, brine holding capacity 5,000L, liquid refrigerant Freon or NH3, defrosting steam, main drive movement full servo, comes with button up fill, volumetric filler for BU, volumetric fruit filler, volumetric microfiller, 3 x volumetric fillers, flt sick inserter, round stick inserter, chewing gum stick inserter, intermedial extraction, product saving unit, 200Kg chocolate tank, chocolate dipping tank, NH3 Evaporator 200Kw, 4 sets of moulds, catwalk gantry, ask for further spec, total cost brand new £1,120,300

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
12
Metal işleme ve takım tezgahlarıTesterelerKesme testereleri

MABA MUK 500 circular saw

MABA MUK 500
Cutting diameter: 175 mmSaw blade dimensions: bore 30, min. 450, max. 550 mmSpeed range: 2800 rpmWorking height: 820 mmSuction stub: 1 x 120 - 1 x 150Total power: 5,5 kWWeight of machine: 400 kgSpace requirement (W x D x H): 1,4 x 1,0 x 1,8 mCondition: sehr gutRoller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabledAccessory: documentation
Cutting diameter: 175 mm
Saw blade dimensions: bore 30, min. 450, max. 550 mm
Speed range: 2800 rpm
Working height: 820 mm
Suction stub: 1 x 120 - 1 x 150
Total power: 5,5 kW
Weight of machine: 400 kg
Space requirement (W x D x H): 1,4 x 1,0 x 1,8 m
Condition: sehr gut

Roller conveyor left 2 m, roller conveyor with automatic stop right 4.5 m (4m section length),was rarely used, from a workshop for the disabled

Accessory: documentation

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri

Used ARBURG 420C-1300-350

ARBURG 420C-1300-350
Ref. no.: 18404Hersteller: ARBURGYear of construction: 2001Clamping unitClamping force: 130 tonOpening stroke: 500 mmDistance between tie bars: 420 x420 mmMould height min.: 250 mmOpening width: 750 mmPlaten size (h x v): 605 x 605 mmInjection unitScrew diameter: 45 mmInjection volume: 230 cm³Shot weight: 210 gInjection pressure: 1670 barMeasurements and weightDimensions: 4,68 x 1,3 x 2,2 mMachine weight: 5100 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001

Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar

Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg

Additional information & extras
Core pull: 1 pcs


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Metal işleme ve takım tezgahlarıSac işleme makineleriDöner bükme makineleri

Manual folding machine ERBEND UFA 1015

ERBEND UFA 1015
Bending length: 1050 mmSheet thickness (420 N/mm²): 1.5 mmMax. thickness - stainless steel: 1 mmMax. thickness - aluminium: 2.2 mmMax. bending angle: 150 °Back gauge manual: 500 mmMax. opening width without tools: 200 mmUpper tool: sectioned, 45°Bending flange: adjustment 35 mmLength: 1300 mmWidth: 750 mmHeight: 1515 mmWeight: 280 kg
Bending length: 1050 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
5
Metal işleme ve takım tezgahlarıSac işleme makineleriYuvarlak çekme makineleri

Motorized 4-roll plate bending machine HESSE by IS

HESSE by ISITAN 4R HMS 2050x130
Bending length: 2050 mmMax. bending capacity - mild steel: 4Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mmUpper roll diameter: 130 mmLower roll diameter: 130 mmLateral roll diameter: 130 mmBending speed: 5 m/minMotor power: 2,2 + 1,1 kWLength: 3800 mmWidth: 1150 mmHeight: 1110 mmWeight: 2450 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Baskı makineleriBaskı sonrası makineleriDiğer

Pile turner

Samzon 104L
Samson 104 L pileturnerLift capacity 1000 kg.Min. pile height 320 mm (Including pallet).Max. Pile height 1300 mm (Including pallet).Min. paper size 450 mm x 320 mmMax. Paper size 1200 mm x 800 mmPower 400volts 3 phaseWeight: 725 kg
Samson 104 L pileturner

Lift capacity 1000 kg.
Min. pile height 320 mm (Including pallet).
Max. Pile height 1300 mm (Including pallet).
Min. paper size 450 mm x 320 mm
Max. Paper size 1200 mm x 800 mm
Power 400volts 3 phase
Weight: 725 kg

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
14
Metal işleme ve takım tezgahlarıKumlama makineleriİç taşlama makineleri

TRIPET MAR 200 internal grinder

TRIPET MAR 200
Internal grinding diameter min.: 1 mmInternal grinding diameter max: 50 mmGrinding length: 200 mmCentre height: 132 mmTool spindle speed: 150 - 1.500 rpmTable speed: continuous adjustment up to 10Dressing device: yesSpindle speed: 16.500 - 120.000 rpmInternal grinding spindle: 16.500, 22.000, 33.000 rpmPaper belt filter: yesTotal power: 3 kWWeight of machine: 2000 kgSpace requirement (W x D x H): 1,8 x 1,1 x 1,8 mCondition: goodWell-maintained machine from a German automobile manufacturerAccessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures
Internal grinding diameter min.: 1 mm
Internal grinding diameter max: 50 mm
Grinding length: 200 mm
Centre height: 132 mm
Tool spindle speed: 150 - 1.500 rpm
Table speed: continuous adjustment up to 10
Dressing device: yes
Spindle speed: 16.500 - 120.000 rpm
Internal grinding spindle: 16.500, 22.000, 33.000 rpm
Paper belt filter: yes
Total power: 3 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 1,8 x 1,1 x 1,8 m
Condition: good

Well-maintained machine from a German automobile manufacturer

Accessory: Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of grinding stones --> see pictures

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Metal işleme ve takım tezgahlarıSac işleme makineleriKesit çelik makaslar

Hydraulic steelworker GEKA Bendicrop 60 S

GEKA Bendicrop 60 S
Punching power: 60 tonThroat depth: 250 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40 x 11 mmStrokes: 32 1/minFlat steel: 350 x 15 mmAngle steel: 120 x 10 mmRound / square steel: 45 / 40 mmNotcher: 10 mmBending unit: max. 150x10 mmMotor: 5.5 kWLength: 1850 mmWidth: 1300 mmHeight: 2100 mmWeight: 1390 kg
Punching power: 60 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Metal işleme ve takım tezgahlarıSac işleme makineleriKesit çelik makaslar

Steelworker GEKA Bendicrop 50

GEKA Bendicrop 50
Punching power: 50 tonThroat depth: 177 mmNumber of stations: 5Cylinder: 1Max. diameter at sheet thickness (mild steel): 31 x 12 mmStrokes: 34 1/minFlat steel: 350 x 15 mmAngle steel: 80 x 8 mmRound / square steel: 35 / 30 mmNotcher: 10 mmBending unit: 100 x 10 mmMotor: 3 kWLength: 1300 mmWidth: 1100 mmHeight: 1850 mmWeight: 950 kg
Punching power: 50 ton
Throat depth: 177 mm
Number of stations: 5
Cylinder: 1
Max. diameter at sheet thickness (mild steel): 31 x 12 mm
Strokes: 34 1/min
Flat steel: 350 x 15 mm
Angle steel: 80 x 8 mm
Round / square steel: 35 / 30 mm
Notcher: 10 mm
Bending unit: 100 x 10 mm
Motor: 3 kW
Length: 1300 mm
Width: 1100 mm
Height: 1850 mm
Weight: 950 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
15
Gıda makineleriŞekerleme makineleri

Laief GSL-14-12 Grigoli stick line

Laief GSL-14-12 Grigoli stick line, Serial: PP-11-2018, 2019, Max mechanical speed 25, number of wide 12, capacity 12/30,000, row of moulds 130, cooling CaCI2, brine holding capacity 5,000L, liquid refrigerant Freon or NH3, defrosting steam, main drive movement full servo, comes with button up fill, volumetric filler for BU, volumetric fruit filler, volumetric microfiller, 3 x volumetric fillers, flt sick inserter, round stick inserter, chewing gum stick inserter, intermedial extraction, product saving unit, 200Kg chocolate tank, chocolate dipping tank, NH3 Evaporator 200Kw, 4 sets of moulds, catwalk gantry, ask for further spec, total cost brand new £1,120,300
Laief GSL-14-12 Grigoli stick line, Serial: PP-11-2018, 2019, Max mechanical speed 25, number of wide 12, capacity 12/30,000, row of moulds 130, cooling CaCI2, brine holding capacity 5,000L, liquid refrigerant Freon or NH3, defrosting steam, main drive movement full servo, comes with button up fill, volumetric filler for BU, volumetric fruit filler, volumetric microfiller, 3 x volumetric fillers, flt sick inserter, round stick inserter, chewing gum stick inserter, intermedial extraction, product saving unit, 200Kg chocolate tank, chocolate dipping tank, NH3 Evaporator 200Kw, 4 sets of moulds, catwalk gantry, ask for further spec, total cost brand new £1,120,300

İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

SCHARMANN Dekamat MCF 132
Spindeldurchmesser: 130 mmx-Weg: mmy-Weg: 1750 mmz-Weg: 600 mmw-Achse: 800 mmSpindelaufnahme: SK 50Steuerung: Siemens 8MTyp: 8M mmTischfläche: 1500x1300 mmTischbelastung: . kgDrehzahl: . U/minSpindelantrieb: . kWVorschub: . m/minGesamtleistungsbedarf: . kWMaschinengewicht ca.: 75 tRaumbedarf ca.: . m
Spindeldurchmesser: 130 mm
x-Weg: mm
y-Weg: 1750 mm
z-Weg: 600 mm
w-Achse: 800 mm
Spindelaufnahme: SK 50
Steuerung: Siemens 8M
Typ: 8M mm
Tischfläche: 1500x1300 mm
Tischbelastung: . kg
Drehzahl: . U/min
Spindelantrieb: . kW
Vorschub: . m/min
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: 75 t
Raumbedarf ca.: . m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

TOS WHN 13C
Spindeldurchmesser: 130 mmx-Weg: 3500 mmy-Weg: 2500 mmz-Weg: 1250 mmw-Achse: 800 mmb-Achse: 360 °Spindeldrehzahlen: 1000 U/minGetriebestufen: 4Steuerung: HeidenhainTyp: 355Tischfläche: 1800x2200 mmTischbelastung: 12000 kgSpindelaufnahme ISO: 50T-Nutenbreite: 22 mmT-Nuten - Abstand: 160 mmVorschub: 1-6000 mm/minTisch drehbar: 1,5 U.min-1Gesamtleistungsbedarf: 80 KVAMaschinengewicht ca.: 36 tRaumbedarf ca.: 7,7x7,2x4,9 m
Spindeldurchmesser: 130 mm
x-Weg: 3500 mm
y-Weg: 2500 mm
z-Weg: 1250 mm
w-Achse: 800 mm
b-Achse: 360 °
Spindeldrehzahlen: 1000 U/min
Getriebestufen: 4
Steuerung: Heidenhain
Typ: 355
Tischfläche: 1800x2200 mm
Tischbelastung: 12000 kg
Spindelaufnahme ISO: 50
T-Nutenbreite: 22 mm
T-Nuten - Abstand: 160 mm
Vorschub: 1-6000 mm/min
Tisch drehbar: 1,5 U.min-1
Gesamtleistungsbedarf: 80 KVA
Maschinengewicht ca.: 36 t
Raumbedarf ca.: 7,7x7,2x4,9 m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

UNION BFK 130/1
Spindeldurchmesser: 130 mmx-Weg: 3500 mmy-Weg: 2050 mmz-Weg: 1050 mmSpindelaufnahme ISO: 50Drehzahl: 4-1120 U/minVorschub: 5-2000 mm/minBohrspindelhub: 850 mmHauptantriebsmotor: 45 kWTischfläche: 1600x2000 mmSteuerung: HeidenhainTyp: TNC 426Werkstückgewicht: 12500 kgPlanschieber: 720 mmPlanschieberweg: 240 mmGesamtleistungsbedarf: 90 kWMaschinengewicht ca.: 31,1 tRaumbedarf ca.: 6,5x5x5x4 m
Spindeldurchmesser: 130 mm
x-Weg: 3500 mm
y-Weg: 2050 mm
z-Weg: 1050 mm
Spindelaufnahme ISO: 50
Drehzahl: 4-1120 U/min
Vorschub: 5-2000 mm/min
Bohrspindelhub: 850 mm
Hauptantriebsmotor: 45 kW
Tischfläche: 1600x2000 mm
Steuerung: Heidenhain
Typ: TNC 426
Werkstückgewicht: 12500 kg
Planschieber: 720 mm
Planschieberweg: 240 mm
Gesamtleistungsbedarf: 90 kW
Maschinengewicht ca.: 31,1 t
Raumbedarf ca.: 6,5x5x5x4 m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

PEGARD Precivit 2 PBC
Spindeldurchmesser: 130 mmx-Weg: 3000 mmy-Weg: 2000 mmz-Weg: 1240 mmw-Achse: 950 mmPlanschieber: CNCPlanschieberdurchmesser: 700 mmDrehzahl: 16-1250 U/minSpindelmotor: 42 kWTischfläche: 1420x2000 mmWerkstückgewicht: 12000 kgSteuerung: SiemensTyp: 840 CPlanschieberweg: 170 mmPlanscheibendrehzahlen von - bis: 4-315 U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 3000 mm
y-Weg: 2000 mm
z-Weg: 1240 mm
w-Achse: 950 mm
Planschieber: CNC
Planschieberdurchmesser: 700 mm
Drehzahl: 16-1250 U/min
Spindelmotor: 42 kW
Tischfläche: 1420x2000 mm
Werkstückgewicht: 12000 kg
Steuerung: Siemens
Typ: 840 C
Planschieberweg: 170 mm
Planscheibendrehzahlen von - bis: 4-315 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

UNION CBFK 130/2
Spindeldurchmesser: 130 mmx-Weg: 3000 mmy-Weg: 1600 mmz-Weg: 1250 mmSteuerung: HeidenhainTyp: TNC 426Tischfläche: 2000x1600 mmTischbelastung: 12500 kgDrehtisch: 360 °Spindeldrehzahlen: 12-3000 U/minVorschub: 1-9999 mm/minEilgang: 10000 mm/minGesamtleistungsbedarf: 80 KVAMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 3000 mm
y-Weg: 1600 mm
z-Weg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 426
Tischfläche: 2000x1600 mm
Tischbelastung: 12500 kg
Drehtisch: 360 °
Spindeldrehzahlen: 12-3000 U/min
Vorschub: 1-9999 mm/min
Eilgang: 10000 mm/min
Gesamtleistungsbedarf: 80 KVA
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

UNION BFT 130/6
Spindeldurchmesser: 130 mmx-Weg: 2750 mmy-Weg: 2500 mmz-Weg: 1050 mmw-Achse: 1000 mmPlanschieberdurchmesser: 800 mmPlanschieberweg: 240 mmTischfläche: 1800x2000 mmDrehzahl: 4,8-900 U/minWerkstückgewicht: 8000 kgPlanscheibendrehzahlen von - bis: 4,5-180 U/minVorschub: 5-2000 mm/minGesamtleistungsbedarf: 40 kWMaschinengewicht ca.: 37 tRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 2750 mm
y-Weg: 2500 mm
z-Weg: 1050 mm
w-Achse: 1000 mm
Planschieberdurchmesser: 800 mm
Planschieberweg: 240 mm
Tischfläche: 1800x2000 mm
Drehzahl: 4,8-900 U/min
Werkstückgewicht: 8000 kg
Planscheibendrehzahlen von - bis: 4,5-180 U/min
Vorschub: 5-2000 mm/min
Gesamtleistungsbedarf: 40 kW
Maschinengewicht ca.: 37 t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

TOS WHN 13 A
Spindeldurchmesser: 130 mmx-Weg: 2000 mmy-Weg: 2000 mmz-Weg: 1250 mmw-Achse: 800 mmSteuerung: HeidenhainTyp: TNC 135Tischfläche: 1800x1800 mmTischbelastung: 12000 kgAntriebsleistung: 30 kW
Spindeldurchmesser: 130 mm
x-Weg: 2000 mm
y-Weg: 2000 mm
z-Weg: 1250 mm
w-Achse: 800 mm
Steuerung: Heidenhain
Typ: TNC 135
Tischfläche: 1800x1800 mm
Tischbelastung: 12000 kg
Antriebsleistung: 30 kW


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

UNION BFKP 130 CNC 600
Spindeldurchmesser: 130 mmx-Weg: 2000 mmy-Weg: 1600 mmz-Weg: 1000 mmSpindelaufnahme ISO: 50Drehzahl: 4-1120 U/minVorschub: 5-2000 mm/minBohrspindelhub: 850 mmHauptantriebsmotor: 45 kWTischfläche: 1250x1600 mmSteuerung: HeidenhainTyp: TNC 426Werkstückgewicht: 12500 kgPlanschieber: 720Planschieberweg: 240 mmGesamtleistungsbedarf: 90 kWMaschinengewicht ca.: 26,3 tRaumbedarf ca.: 6,5x5x5x4 m
Spindeldurchmesser: 130 mm
x-Weg: 2000 mm
y-Weg: 1600 mm
z-Weg: 1000 mm
Spindelaufnahme ISO: 50
Drehzahl: 4-1120 U/min
Vorschub: 5-2000 mm/min
Bohrspindelhub: 850 mm
Hauptantriebsmotor: 45 kW
Tischfläche: 1250x1600 mm
Steuerung: Heidenhain
Typ: TNC 426
Werkstückgewicht: 12500 kg
Planschieber: 720
Planschieberweg: 240 mm
Gesamtleistungsbedarf: 90 kW
Maschinengewicht ca.: 26,3 t
Raumbedarf ca.: 6,5x5x5x4 m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerDerin delik matkapları

Tieflochbohrmaschine

BLANSKO
Vollbohren: 150 mmBohrtiefe: 13000 mmWerkstückgewicht: 80 tSteuerung: SiemensTyp: S 7Werkstück-Durchmesser: 1250 mmWerkstückabmessungen min.: 2000 mmAufbohrdurchmesser: 450 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 160 tRaumbedarf ca.: m
Vollbohren: 150 mm
Bohrtiefe: 13000 mm
Werkstückgewicht: 80 t
Steuerung: Siemens
Typ: S 7
Werkstück-Durchmesser: 1250 mm
Werkstückabmessungen min.: 2000 mm
Aufbohrdurchmesser: 450 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 160 t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerPlaka delme değirmenleri

Plattenbohrwerk - Traghülse

SKODA W 250 HP NC
Spindeldurchmesser: 250 mmx-Weg: 12000 mmy-Weg: 5850 mmz-Weg: 1600 mmw-Achse: 2000 mmSteuerung: SiemensTyp: 840 D PowerlineDrehzahl: 875 U/minTraghülsenabmessung: 540x560 mmKühlmitteleinrichtung: 1800 lGesamtleistungsbedarf: kWMaschinengewicht ca.: 130 tRaumbedarf ca.: 21x5x10,25 m
Spindeldurchmesser: 250 mm
x-Weg: 12000 mm
y-Weg: 5850 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D Powerline
Drehzahl: 875 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1800 l
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 21x5x10,25 m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerPlaka delme değirmenleri

Plattenbohrwerk - Traghülse

SKODA W 200 GNCR
Spindeldurchmesser: 200 mmx-Weg: 10500 mmy-Weg: 5750 mmz-Weg: 1600 mmw-Achse: 2000 mmSteuerung: SiemensTyp: 840 D SLDrehzahl: 920 U/minTraghülsenabmessung: 540x560 mmKühlmitteleinrichtung: 1500 lGesamtleistungsbedarf: 80 kWMaschinengewicht ca.: 130 tRaumbedarf ca.: 21,9x5x10,75 m
Spindeldurchmesser: 200 mm
x-Weg: 10500 mm
y-Weg: 5750 mm
z-Weg: 1600 mm
w-Achse: 2000 mm
Steuerung: Siemens
Typ: 840 D SL
Drehzahl: 920 U/min
Traghülsenabmessung: 540x560 mm
Kühlmitteleinrichtung: 1500 l
Gesamtleistungsbedarf: 80 kW
Maschinengewicht ca.: 130 t
Raumbedarf ca.: 21,9x5x10,75 m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerPlaka delme değirmenleri

Plattenbohrwerk - Traghülse

FERMAT WF 13 R CNC
Spindeldurchmesser: 130 mmx-Weg: 12000 mmy-Weg: 3500 mmSteuerung: HidenhainTyp: ITNC 530Traghülse: Horizontalbewegung: 700 mmSpindelverfahrweg W-Achse: 800 mmMotorleistung: 52 kWDrehzahl: 3000 U/minSpindelhub - max.: 700 mmBohrwerksdrehtisch:: 3500x3000 mmTischbelastung: 40000 kpVerfahrweg - w: 1250 mmPlanschieber: 640 mmHub: 200 mmWerkzeugwechsler: 40 Pos.Plattenfeld: 7000x5200 mmPlattengröße: 3500x1750 mmGesamtleistungsbedarf: 170 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 12000 mm
y-Weg: 3500 mm
Steuerung: Hidenhain
Typ: ITNC 530
Traghülse: Horizontalbewegung: 700 mm
Spindelverfahrweg W-Achse: 800 mm
Motorleistung: 52 kW
Drehzahl: 3000 U/min
Spindelhub - max.: 700 mm
Bohrwerksdrehtisch:: 3500x3000 mm
Tischbelastung: 40000 kp
Verfahrweg - w: 1250 mm
Planschieber: 640 mm
Hub: 200 mm
Werkzeugwechsler: 40 Pos.
Plattenfeld: 7000x5200 mm
Plattengröße: 3500x1750 mm
Gesamtleistungsbedarf: 170 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerPlaka delme değirmenleri

Plattenbohrwerk - Traghülse

COLGAR FRAL 50
Spindeldurchmesser: 130 mmx-Weg: 10000 mmy-Weg: 3500 mmz-Weg: 1000 mmSteuerung: HeidenhainTyp: TRT1500 mmWerkstückgewicht: 300 tDrehzahl: 1620 U/minSpindelaufnahme ISO: 50Stützlager: 2Winkelkopf: 2Antriebsleistung: 76 kWPlattenfeld: 109 m²Dicke: 450 mmBohrwerksdrehtisch:: ColgarTischfläche: 2000x2500 mmTischbelastung: 20000 kgVerfahrweg: 2000 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 10000 mm
y-Weg: 3500 mm
z-Weg: 1000 mm
Steuerung: Heidenhain
Typ: TRT1500 mm
Werkstückgewicht: 300 t
Drehzahl: 1620 U/min
Spindelaufnahme ISO: 50
Stützlager: 2
Winkelkopf: 2
Antriebsleistung: 76 kW
Plattenfeld: 109 m²
Dicke: 450 mm
Bohrwerksdrehtisch:: Colgar
Tischfläche: 2000x2500 mm
Tischbelastung: 20000 kg
Verfahrweg: 2000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerPlaka delme değirmenleri

Plattenbohrwerk - Horizontal

WOTAN Rapid 2 K
Spindeldurchmesser: 130 mmx-Weg: 7700 mmy-Weg: 1500 mmSteuerung: SiemensTyp: Sinumerik 840 CSpindelaufnahme ISO: 130Drehzahl: 1490 U/minAntriebsleistung: 45 kWPlattenfeld: 9000x6000 mmWerkstückgewicht: 100 tGesamtleistungsbedarf: kWRaumbedarf ca.: m
Spindeldurchmesser: 130 mm
x-Weg: 7700 mm
y-Weg: 1500 mm
Steuerung: Siemens
Typ: Sinumerik 840 C
Spindelaufnahme ISO: 130
Drehzahl: 1490 U/min
Antriebsleistung: 45 kW
Plattenfeld: 9000x6000 mm
Werkstückgewicht: 100 t
Gesamtleistungsbedarf: kW
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerPlaka delme değirmenleri

Plattenbohrwerk - Horizontal

UNION BFP 130-5
Spindeldurchmesser: 130 mmx-Weg: 7000 mmy-Weg: 2000 mmAufnahme ISO: 50w-Achse: 1100 mmz-Achse: 350 mmSpannung: 400 VGesamtleistungsbedarf: 30 kWMaschinengewicht ca.: . tRaumbedarf ca.: . m
Spindeldurchmesser: 130 mm
x-Weg: 7000 mm
y-Weg: 2000 mm
Aufnahme ISO: 50
w-Achse: 1100 mm
z-Achse: 350 mm
Spannung: 400 V
Gesamtleistungsbedarf: 30 kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
5
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerPlaka delme değirmenleri

Plattenbohrwerk - Horizontal

UNION BFP 125
Spindeldurchmesser: 125 mmx-Weg: 2500 mmy-Weg: 1900 mmw-Achse: 1100 mmPlanschieberweg: mmBohrwerksdrehtisch:: 1800x1300 mmTisch verstellbar: 1000 mmDigitalanzeige: PfillipsGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 125 mm
x-Weg: 2500 mm
y-Weg: 1900 mm
w-Achse: 1100 mm
Planschieberweg: mm
Bohrwerksdrehtisch:: 1800x1300 mm
Tisch verstellbar: 1000 mm
Digitalanzeige: Pfillips
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
9
Metal işleme ve takım tezgahlarıİşlem merkezleriDikey işleme merkezleri

Bearbeitungszentrum - Vertikal

ENSHU E130
x-Weg: 400 mmy-Weg: 300 mmz-Weg: 300 mmSteuerung: JasnacWerkzeugaufnahme: BT30Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 400 mm
y-Weg: 300 mm
z-Weg: 300 mm
Steuerung: Jasnac
Werkzeugaufnahme: BT30
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Metal işleme ve takım tezgahlarıİşlem merkezleriİşleme merkezleri yatay

Bearbeitungszentrum - Horizontal

NIIGATA HN 50-B
x-Weg: 2120 mmy-Weg: 1000 mmz-Weg: 850 mmSteuerung: FanucTischfläche: 3600x1300 mmTeilapparat: CNCWerkzeugwechsler: 60 PosGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 2120 mm
y-Weg: 1000 mm
z-Weg: 850 mm
Steuerung: Fanuc
Tischfläche: 3600x1300 mm
Teilapparat: CNC
Werkzeugwechsler: 60 Pos
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Metal işleme ve takım tezgahlarıTornalarAğır hizmet tipi torna tezgahları

Schwerdrehmaschine

MFD - HOESCH D1100
Drehdurchmesser über Bett: 2100 mmDrehdurchmesser über Support: 1300 mmDrehlänge: 6800 mmWerkstückgewicht: 25000 kgHauptantriebsmotor: 140 kWSteuerung: SiemensTyp: 840 CPlanscheibe: 1100 mmBettbreite: 2500 mmLünette: 600 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser über Bett: 2100 mm
Drehdurchmesser über Support: 1300 mm
Drehlänge: 6800 mm
Werkstückgewicht: 25000 kg
Hauptantriebsmotor: 140 kW
Steuerung: Siemens
Typ: 840 C
Planscheibe: 1100 mm
Bettbreite: 2500 mm
Lünette: 600 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıTornalarMerkez torna tezgahları ve mil torna tezgahları

Leit- und Zugspindeldrehmaschine

HEYLIGENSTAEDT 800 ES
Drehdurchmesser über Bett: 1740 mmDrehdurchmesser über Support: 1300 mmDrehlänge: 15200 mmDrehzahl: 4-180 U/minLünette: 860Planscheibe: 1500 mmPinolendurchmesser: 220 mmBettbreite: 1025 mmGesamtleistungsbedarf: 37 kWMaschinengewicht ca.: t
Drehdurchmesser über Bett: 1740 mm
Drehdurchmesser über Support: 1300 mm
Drehlänge: 15200 mm
Drehzahl: 4-180 U/min
Lünette: 860
Planscheibe: 1500 mm
Pinolendurchmesser: 220 mm
Bettbreite: 1025 mm
Gesamtleistungsbedarf: 37 kW
Maschinengewicht ca.: t


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıTornalarTornalar

Karusselldrehmaschine - Einständer

SEDIN 1A512M
Planscheibendurchmesser: 1100 mmUmlaufdurchmesser: 1250 mmDrehhöhe: 1300 mmSteuerung: SiemensTyp: 805Werkstückgewicht: 4000 kgWerkzeugwechsler: 10Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Planscheibendurchmesser: 1100 mm
Umlaufdurchmesser: 1250 mm
Drehhöhe: 1300 mm
Steuerung: Siemens
Typ: 805
Werkstückgewicht: 4000 kg
Werkzeugwechsler: 10
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıTornalarOtomatik çubuk torna tezgahları

Einspindelstangenautomat

INDEX GS 42
Drehdurchmesser: 80 mmDrehlänge: . mmSteuerung: Siemens C 200Werkzeugwechseleinrichtung: 14Umlaufdurchmesser: 130 mmSpindeldurchlass: 42 mmRevolverkopf: 2Gesamtleistungsbedarf: kWMaschinengewicht ca.: t
Drehdurchmesser: 80 mm
Drehlänge: . mm
Steuerung: Siemens C 200
Werkzeugwechseleinrichtung: 14
Umlaufdurchmesser: 130 mm
Spindeldurchlass: 42 mm
Revolverkopf: 2
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Metal işleme ve takım tezgahlarıTornalarCNC torna tezgahları

CNC Drehmaschine

WEIPERT Powerturn Wp 1050
Drehdurchmesser: 1130 mmDrehlänge: 1800 mmSteuerung: SiemensTyp: 810Drehdurchmesser über Support: 780 mmBettbreite: 710 mmPlanschieber: 1000 mmDrehzahl: 4,5-355 U/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Drehdurchmesser: 1130 mm
Drehlänge: 1800 mm
Steuerung: Siemens
Typ: 810
Drehdurchmesser über Support: 780 mm
Bettbreite: 710 mm
Planschieber: 1000 mm
Drehzahl: 4,5-355 U/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
5
Metal işleme ve takım tezgahlarıSac işleme makineleriLevha makasları

Motorized plate shear HESSE by DURMA RGM 1303

HESSE by DURMA RGM 1303
Cutting length: 1350 mmMax. thickness - mild steel: 3 mmStrokes: 35 1/minCutting angle: 1 °Back gauge: 550 mmMotor power: 3 kWSupport arms: 2 pcs.Table height: 850 mmTable width: 400 mmLength: 1700 mmWidth: 1350 mmHeight: 1200 mmWeight: 950 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Metal işleme ve takım tezgahlarıTornalar

Centre lathe STOREBRO GK 195

STOREBRO GK 195
Swing over bed: 400 mmDistance between centers: 1500 mmCentre height: 195 mmSpindle bore: 52 mmWidth of bed: 270 mmSpindle speed steps: 12Spindle revs: 30 - 1300 rpmMotor power: 3,3 / 4 kWLength: 2600 mmWidth: 800 mmHeight: 1300 mmWeight: 1100 kg
Swing over bed: 400 mm
Distance between centers: 1500 mm
Centre height: 195 mm
Spindle bore: 52 mm
Width of bed: 270 mm
Spindle speed steps: 12
Spindle revs: 30 - 1300 rpm
Motor power: 3,3 / 4 kW
Length: 2600 mm
Width: 800 mm
Height: 1300 mm
Weight: 1100 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıİşlem merkezleriİşleme merkezleri yatay

Bearbeitungszentrum - Horizontal

SCHARMANN Solon 5
x-Weg: 2400 mmy-Weg: 1000 mmz-Weg: 1250 mmSteuerung: SiemensTyp: 840 CPalettengröße: 1250x800 mmAnzahl der Paletten: 4Drehtisch: 360 °Drehzahl: 4-5800 U/minTischbelastung: 3000 kgSpindelaufnahme ISO: 50Werkzeugwechsler: 161 Pos.Spindeldurchmesser: 130 mmFräsantrieb: 45 kWGesamtleistungsbedarf: kWMaschinengewicht ca.: 39 tRaumbedarf ca.: 8x7x4,2 m
x-Weg: 2400 mm
y-Weg: 1000 mm
z-Weg: 1250 mm
Steuerung: Siemens
Typ: 840 C
Palettengröße: 1250x800 mm
Anzahl der Paletten: 4
Drehtisch: 360 °
Drehzahl: 4-5800 U/min
Tischbelastung: 3000 kg
Spindelaufnahme ISO: 50
Werkzeugwechsler: 161 Pos.
Spindeldurchmesser: 130 mm
Fräsantrieb: 45 kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 39 t
Raumbedarf ca.: 8x7x4,2 m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Metal işleme ve takım tezgahlarıDelme makineleri ve sıkıcı değirmenlerMasa delme değirmenleri

Tischbohrwerk

WOTAN B90 S
Spindeldurchmesser: 90 mmx-Weg: 1400 mmy-Weg: 1250 mmz-Weg: 1300 mmTischfläche: 1100x1400 mmSpindelweg: 800 mmSpindeldrehzahlen: 1000 U/minSpindelaufnahme MK: 5Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Spindeldurchmesser: 90 mm
x-Weg: 1400 mm
y-Weg: 1250 mm
z-Weg: 1300 mm
Tischfläche: 1100x1400 mm
Spindelweg: 800 mm
Spindeldrehzahlen: 1000 U/min
Spindelaufnahme MK: 5
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
10
Paketleme makineleriPaketleme makineleri

Metron eging

metron eging
: 2 x 5Space requirement (W x D x H): in Kiste 1,45 x 2,38 x 0,38 m
: 2 x 5
Space requirement (W x D x H): in Kiste 1,45 x 2,38 x 0,38 m


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
1
Metal işleme ve takım tezgahlarıSac işleme makineleriDelme

Hydraulic punching machine GEKA PUMA 80 SD

GEKA PUMA 80 SD
Punching power: 80 tonThroat depth: 750 mmMax. diameter at sheet thickness (mild steel): 40x14 mmMax. number of strokes at 20 mm stroke: 40 1/minMotor: 9 kWLength: 1700 mmWidth: 1300 mmHeight: 2050 mmWeight: 1715 kg
Punching power: 80 ton
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Metal işleme ve takım tezgahlarıTornalar

Centre lathe ZMM CU 500 MRD

ZMM CU 500 MRD
Swing over bed: 500 mmDistance between centers: 1500 mmCentre height: 250 mmSpindle bore: 75 mmswing over cross slide: 300 mmWidth of bed: 400 mmSpindle nose / DIN55027: 8Spindle taper: 80 MRevs continuous variable in gear steps: 3Revs continuous variable: 25-100, 100-400, 500-2000 rpmNumber of feeds: 120Longitudinal feed range: 0.04 - 12 mm/rCross feed range: 0.02 - 6 mm/rMetric thread range: 0.5 - 120 mmInch thread range: Array TpiModule thread range: 0.125 - 30DP thread range: 1 - 240Cross slide travel: 315 mmTop slide travel: 130 mmTailstock quill diameter: 90 mmTailstock quill taper: 5 MKTailstock travel: 230 mmMotor power: 11 kWWeight: 2950 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 75 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 25-100, 100-400, 500-2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: 1 - 240
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 2950 kg


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Metal işleme ve takım tezgahlarıSac işleme makineleriYem düzleştiriciler

Decoiler HESSE by COILTECH CMC S 4000 600 M D1300

HESSE by COILTECH CMC S 4000 600 M D1300
Coil weight: 4000 kgCoil outer diameter: 1300 mmMin. coil inner diameter: 450 - 550 mmMax. coil width: 600 mmMin. Coil width: 50Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 4000 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm


İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Aramayı kaydet
  • E-posta ile ücretsiz yeni teklifler alacaksınız
  • Arama isteğinizi istediğiniz zaman sonlandırabilirsiniz
  • Hiçbir koşulda e-posta adresiniz (bilgileriniz) üçüncü şahıslarla paylaşılmayacaktır
Bu alana reklam verebilirsiniz.
Bağlayıcı olmayan bir teklif için bizimle iletişime geçin.
Teklif al
Henüz üye olmadınız mı ?

Hizmetlerimiz ve fiyatlarımız hakkında daha fazla bilgi edinmek için "Daha fazla bilgi" sekmesine tıklayın.

Bütün tarifelerimizde 6 ay geçerli deneme süresi mevcuttur. Bizi ücretsiz deneyin !
Şimdi ücretsiz üye ol