13
Plastik işleme makineleriÇevre ekipmanları
Ref. no.: 18439Hersteller: MOTANYear of construction: 1995Further information:These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.
Ref. no.: 18439
Hersteller: MOTAN
Year of construction: 1995
Further information:
These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.
Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: MOTAN
Year of construction: 1995
Further information:
These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.
Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
Plastik işleme makineleriPlastik enjeksiyon makineleri
Ref. no.: 17540Hersteller: ARBURGYear of construction: 1994Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 270 X 270 mmMould height min.: 200 mmPlaten size (h x v): 405 X405 mmInjection unitScrew diameter: 25 mmInjection volume: 67 cm³Shot weight: 61 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,3 X 1,5 X 2,0 mMachine weight: 2400 kg
Ref. no.: 17540
Hersteller: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 1994
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
13
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18395Hersteller: DEMAGYear of construction: 2007Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 500 X 500 mmMould height min.: 250 mmMould height max.: 560 mmPlaten size (h x v): 750 X 750 mmInjection unitScrew diameter: 40 mmInjection volume: 255 cm³Shot weight: 230 gInjection pressure: 2418 barMeasurements and weightDimensions: 5,2 X 1,6 X 2,1 mMachine weight: 7500 kgRobotProducer: Wittmann Type: W711-1776 (doppelter x-Greifer) Year: 2008
Ref. no.: 18395
Hersteller: DEMAG
Year of construction: 2007
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 X 500 mm
Mould height min.: 250 mm
Mould height max.: 560 mm
Platen size (h x v): 750 X 750 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 255 cm³
Shot weight: 230 g
Injection pressure: 2418 bar
Measurements and weight
Dimensions: 5,2 X 1,6 X 2,1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W711-1776 (doppelter x-Greifer)
Year: 2008
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: DEMAG
Year of construction: 2007
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 X 500 mm
Mould height min.: 250 mm
Mould height max.: 560 mm
Platen size (h x v): 750 X 750 mm
Injection unit
Screw diameter: 40 mm
Injection volume: 255 cm³
Shot weight: 230 g
Injection pressure: 2418 bar
Measurements and weight
Dimensions: 5,2 X 1,6 X 2,1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W711-1776 (doppelter x-Greifer)
Year: 2008
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleri
Ref. no.: 17147Hersteller: ENGELYear of construction: 2008Clamping unitClamping force: 400 tonOpening stroke: 1008 mmPlaten size (h x v): 1360 x 1460 mmInjection unitScrew diameter: 60 + 25 + 25+ 25+ 25 mmInjection volume: 608 + 54 + 54 + 54 + 54 cm³Shot weight: 547 + 48 + 48 + 48 + 48 gInjection pressure: 1725 + 1200 + 1200 + 1200 + 1200 barMeasurements and weightMachine weight: 22.000 + 6.600 kgDimensions LxWxH part 1: 5 x 2,3 x mDimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm
Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18244Hersteller: DEMAGYear of construction: 2006Clamping unitClamping force: 200 tonOpening stroke: 575 mmDistance between tie bars: 580 X 580 mmMould height min.: 340 mmMould height max.: 790 mmOpening width: 1365 mmPlaten size (h x v): 860 X 860 mmInjection unitScrew diameter: 50 mmInjection volume: 442 cm³Shot weight: 400 gInjection pressure: 1946 barMeasurements and weightDimensions: 5,4 X 1,7 X 2,1 mMachine weight: 8200 kg
Ref. no.: 18244
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 200 ton
Opening stroke: 575 mm
Distance between tie bars: 580 X 580 mm
Mould height min.: 340 mm
Mould height max.: 790 mm
Opening width: 1365 mm
Platen size (h x v): 860 X 860 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 442 cm³
Shot weight: 400 g
Injection pressure: 1946 bar
Measurements and weight
Dimensions: 5,4 X 1,7 X 2,1 m
Machine weight: 8200 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 200 ton
Opening stroke: 575 mm
Distance between tie bars: 580 X 580 mm
Mould height min.: 340 mm
Mould height max.: 790 mm
Opening width: 1365 mm
Platen size (h x v): 860 X 860 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 442 cm³
Shot weight: 400 g
Injection pressure: 1946 bar
Measurements and weight
Dimensions: 5,4 X 1,7 X 2,1 m
Machine weight: 8200 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleri
Ref. no.: 17148Hersteller: ENGELYear of construction: 2008Clamping unitClamping force: 400 tonOpening width: 1008 mmPlaten size (h x v): 1300 x 1460 mmInjection unitScrew diameter: 50 + 18 + 25 + 25 + 25 + 25 mmInjection volume: 422 + 38 + 54 + 54 + 54 +54 cm³Shot weight: 380 + 35 + 48 +48 + 48 + 48 gInjection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 barMeasurements and weightMachine weight: 22000 + 6600 kgDimensions LxWxH part 1: 5 x 2,3 x mDimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17148
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm
Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm
Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
12
Plastik işleme makineleriPlastik enjeksiyon makineleri
Ref. no.: 17146Hersteller: ENGELYear of construction: 2004Clamping unitClamping force: 300 tonOpening stroke: 855 mmInjection unitScrew diameter: 50 + 25 mmInjection volume: 393 + 49 cm³Shot weight: 354 + 44 gInjection pressure: 1917 + 1586 barMeasurements and weightDimensions: 6,5 x 2,3 x mMachine weight: 21000 kg
Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
_thumb.jpeg "İlanı göster")
10
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18333Hersteller: DEMAGYear of construction: 1998Clamping unitClamping force: 330 tonOpening stroke: 675 mmDistance between tie bars: 710 x 630 mmMould height min.: 330 mmMould height max.: 710 mmPlaten size (h x v): 1040 X 950 mmInjection unitScrew diameter: 50 mmInjection volume: 530 cm³Shot weight: 480 gInjection pressure: 2426 barMeasurements and weightDimensions: 6,5 X 2,0 X 2,3 mMachine weight: 14500 kg
Ref. no.: 18333
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar
Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14500 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar
Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14500 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
3
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18331Hersteller: ARBURGYear of construction: 2001Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 320 x 320 mmMould height min.: 225 mmOpening width: 575 mmPlaten size (h x v): 446 x446 mmInjection unitScrew diameter: 25 mmInjection volume: 54 cm³Shot weight: 49 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,5 x 12 x 1,9 mMachine weight: 2250 kg
Ref. no.: 18331
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
8
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18330Hersteller: ARBURGYear of construction: 2003Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 320 X 320 mmMould height min.: 225 mmMould height max.: 575 mmPlaten size (h x v): 446 X 446 mmInjection unitScrew diameter: 25 + 15 mmInjection volume: 39 + 20 cm³Shot weight: 35 + 18 gInjection pressure: 2210 barMeasurements and weightDimensions: 3,5 X 1,2 x 1,9 mMachine weight: 2250 kg
Ref. no.: 18330
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar
Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar
Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
4
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18409Hersteller: ARBURGYear of construction: 2003Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 320 x 320 mmMould height min.: 200 mmOpening width: 550 mmPlaten size (h x v): 446 X 446 mmInjection unitScrew diameter: 25 mmInjection volume: 54 cm³Shot weight: 49 gInjection pressure: 2500 barMeasurements and weightDimensions: 3.25 x 1.15 x 2,0 mMachine weight: 2250 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18409
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 200 mm
Opening width: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3.25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 200 mm
Opening width: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3.25 x 1.15 x 2,0 m
Machine weight: 2250 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
2
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18404Hersteller: ARBURGYear of construction: 2001Clamping unitClamping force: 130 tonOpening stroke: 500 mmDistance between tie bars: 420 x420 mmMould height min.: 250 mmOpening width: 750 mmPlaten size (h x v): 605 x 605 mmInjection unitScrew diameter: 45 mmInjection volume: 230 cm³Shot weight: 210 gInjection pressure: 1670 barMeasurements and weightDimensions: 4,68 x 1,3 x 2,2 mMachine weight: 5100 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar
Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar
Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18398Hersteller: DEMAGYear of construction: 2006Clamping unitClamping force: 160 tonOpening stroke: 500 mmDistance between tie bars: 520 X 520 mmMould height min.: 275 mmMould height max.: 585 mmOpening width: 1085 mmPlaten size (h x v): 770 X 770 mmInjection unitScrew diameter: 50 mmInjection volume: 399 cm³Shot weight: 360 gInjection pressure: 1550 barMeasurements and weightDimensions: 4,9 x 1,5 x 2,0 mMachine weight: 6720 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18398
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 160 ton
Opening stroke: 500 mm
Distance between tie bars: 520 X 520 mm
Mould height min.: 275 mm
Mould height max.: 585 mm
Opening width: 1085 mm
Platen size (h x v): 770 X 770 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 399 cm³
Shot weight: 360 g
Injection pressure: 1550 bar
Measurements and weight
Dimensions: 4,9 x 1,5 x 2,0 m
Machine weight: 6720 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 160 ton
Opening stroke: 500 mm
Distance between tie bars: 520 X 520 mm
Mould height min.: 275 mm
Mould height max.: 585 mm
Opening width: 1085 mm
Platen size (h x v): 770 X 770 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 399 cm³
Shot weight: 360 g
Injection pressure: 1550 bar
Measurements and weight
Dimensions: 4,9 x 1,5 x 2,0 m
Machine weight: 6720 kg
Additional information & extras
Core pull: 1 pcs
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18383Hersteller: DEMAGYear of construction: 2008Clamping unitClamping force: 420 tonOpening stroke: 770 mmDistance between tie bars: 820 X 820 mmMould height min.: 380 mmMould height max.: 825 mmPlaten size (h x v): 1200 X 1100 mmInjection unitScrew diameter: 60 mmInjection volume: 890 cm³Shot weight: 810 gInjection pressure: 2420 barMeasurements and weightDimensions: 8,2 X 2,2 X 2,4 mMachine weight: 22300 kgAdditional information & extrasCore pull: 4 pcsRobotProducer: Remak Year: 2008
Ref. no.: 18383
Hersteller: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 420 ton
Opening stroke: 770 mm
Distance between tie bars: 820 X 820 mm
Mould height min.: 380 mm
Mould height max.: 825 mm
Platen size (h x v): 1200 X 1100 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 890 cm³
Shot weight: 810 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 8,2 X 2,2 X 2,4 m
Machine weight: 22300 kg
Additional information & extras
Core pull: 4 pcs
Robot
Producer: Remak
Year: 2008
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 420 ton
Opening stroke: 770 mm
Distance between tie bars: 820 X 820 mm
Mould height min.: 380 mm
Mould height max.: 825 mm
Platen size (h x v): 1200 X 1100 mm
Injection unit
Screw diameter: 60 mm
Injection volume: 890 cm³
Shot weight: 810 g
Injection pressure: 2420 bar
Measurements and weight
Dimensions: 8,2 X 2,2 X 2,4 m
Machine weight: 22300 kg
Additional information & extras
Core pull: 4 pcs
Robot
Producer: Remak
Year: 2008
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
7
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18368Hersteller: ARBURGYear of construction: 1997Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 320 X 320 mmMould height min.: 300 mmMould height max.: 550 mmPlaten size (h x v): 446 X 446 mmInjection unitScrew diameter: 30 mmInjection volume: 85 cm³Shot weight: 75 gInjection pressure: 2200 barMeasurements and weightDimensions: 3,25 x 1.15 x 2,0 mMachine weight: 2250 kg
Ref. no.: 18368
Hersteller: ARBURG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 300 mm
Mould height max.: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 75 g
Injection pressure: 2200 bar
Measurements and weight
Dimensions: 3,25 x 1.15 x 2,0 m
Machine weight: 2250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ARBURG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 300 mm
Mould height max.: 550 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 75 g
Injection pressure: 2200 bar
Measurements and weight
Dimensions: 3,25 x 1.15 x 2,0 m
Machine weight: 2250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. No.: 18255
Hersteller: ENGEL
yapım yılı: 2004
Sıkıştırma ünitesi
Sıkıştırma kuvveti: 180 ton
Açılış stroku: 750 mm
Bağlantı çubukları arasındaki mesafe: 960 x830 mm
Kalıp yüksekliği min.: 500 mm
Açılış genişliği: 1250 mm
enjeksiyon ünitesi
Vida çapı: 45 mm
Enjeksiyon hacmi: 318 cm³
Atış ağırlığı: 302 gr
Enjeksiyon basıncı: 1769/2360 bar
Ölçüler ve ağırlık
Makine ağırlığı: 13500 kg
Robot
Yapımcı: Witman
Tür: W743
Yıl: 2009
Ref. No.: 18255
Hersteller: ENGEL
yapım yılı: 2004
Sıkıştırma ünitesi
Sıkıştırma kuvveti: 180 ton
Açılış stroku: 750 mm
Bağlantı çubukları arasındaki mesafe: 960 x830 mm
Kalıp yüksekliği min.: 500 mm
Açılış genişliği: 1250 mm
enjeksiyon ünitesi
Vida çapı: 45 mm
Enjeksiyon hacmi: 318 cm³
Atış ağırlığı: 302 gr
Enjeksiyon basıncı: 1769/2360 bar
Ölçüler ve ağırlık
Makine ağırlığı: 13500 kg
Robot
Yapımcı: Witman
Tür: W743
Yıl: 2009
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Hersteller: ENGEL
yapım yılı: 2004
Sıkıştırma ünitesi
Sıkıştırma kuvveti: 180 ton
Açılış stroku: 750 mm
Bağlantı çubukları arasındaki mesafe: 960 x830 mm
Kalıp yüksekliği min.: 500 mm
Açılış genişliği: 1250 mm
enjeksiyon ünitesi
Vida çapı: 45 mm
Enjeksiyon hacmi: 318 cm³
Atış ağırlığı: 302 gr
Enjeksiyon basıncı: 1769/2360 bar
Ölçüler ve ağırlık
Makine ağırlığı: 13500 kg
Robot
Yapımcı: Witman
Tür: W743
Yıl: 2009
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18142Producer: DEMAGYear of construction: 1997Clamping unitClamping force: 50 tonOpening stroke: 400 mmDistance between tie bars: 355 x 355 mmMould height min.: 210 mmPlaten size (h x v): 540 x 540 mmInjection unitScrew diameter: 35 mmInjection volume: 106 cm³Shot weight: 95 gInjection pressure: 2573 barMeasurements and weightDimensions: 3,65 x 1,15 x 1,18 mMachine weight: 3600-2500 kg
Ref. no.: 18142
Producer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Producer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18140Producer: BATTENFELDYear of construction: 2006Clamping unitClamping force: 25 tonOpening stroke: 450 mmDistance between tie bars: 270 X 270 mmMould height min.: 150 mmInjection unitScrew diameter: 14 mmInjection volume: 15 cm³Shot weight: 7 gInjection pressure: 2650 barMeasurements and weightDimensions: 2,25 X 0,90 X 1,30 mMachine weight: 1100 kg
Ref. no.: 18140
Producer: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Producer: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 18138Producer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 850 mmDistance between tie bars: 370 X 3370 mmMould height min.: 200 mmMould height max.: 510 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 22 mmInjection volume: 37 cm³Shot weight: 32 gInjection pressure: 2580 barMeasurements and weightDimensions: 4,50 X 1,28 X 1,95 mMachine weight: 4750 kg
Ref. no.: 18138
Producer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 3370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Producer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 3370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleriÇok bileşenli enjeksiyon kalıplama makineleri
Ref. no.: 18092Producer: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 25250 kg
Ref. no.: 18092
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 17514Producer: BILLIONYear of construction: 2011Clamping unitClamping force: 50 tonOpening stroke: 250 mmDistance between tie bars: 350 x 300 mmMould height min.: 150 mmMould height max.: 400 mmPlaten size (h x v): 490 x 440 mmInjection unitScrew diameter: 25 mmInjection volume: 39 cm³Shot weight: 35 gInjection pressure: 2040 barMeasurements and weightDimensions: 3,7 x 1,4 x 1,8 mMachine weight: 3200 kgAdditional information & extrasHot runner systems: 6 pcs.
Ref. no.: 17514
Producer: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Producer: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
11
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 17507Producer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg
Ref. no.: 17507
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
13
Plastik işleme makineleriPlastik enjeksiyon makineleriPlastik enjeksiyon kalıplama makineleri
Ref. no.: 16369Producer: BATTENFELDYear of construction: 2005Clamping unitClamping force: 75 tonOpening stroke: 800 mmDistance between tie bars: 405 x 405 mmMould height min.: 150 mmMould height max.: 480 mmInjection unitScrew diameter: 18 mmInjection volume: 30 cm³Shot weight: 27 gInjection pressure: 2440 barMeasurements and weightDimensions: 4,5 x 1,7 x 2,0 mMachine weight: 4500 kg
Ref. no.: 16369
Producer: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.
Producer: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
İlan otomatik olarak çevrildiği için bazı hatalar oluşmuş olabilir.