8
Trabajo de metales y máquinas herramientaTaladradoras y mandrinadoras
Mounting table: 300 x 400 mmQuill ram: 120 mmSpeed range: 5800 rpmGearbox stages: 2Feed: 0,001 - 3,5 m/minRapid: 3,5 m/minTaper fixture: MK 3Thread cutting device: with foot switchCoolant system: yesTotal power: 1,5 kWWeight of machine: 380 kgSpace requirement (W x D x H): 0,66 x 0,44 x 1,95 mCondition: very goodHigh-performance drilling machine, machine number 511Accessory: documentation, coolant equipment
Mounting table: 300 x 400 mm
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
9
Trabajo de metales y máquinas herramientaMáquinas de soldarRobots
Load capacity: 16 kgRange working radius: 1550 mmControl Modul: IRC5 M2004Robot version: IRB 2400/16 Type B - M2004Teach Panel: FlexPendantRemote I/O Unit: DSQC 350ANumber of axes: 6Total power: 1 kWWeight of machine: 800 kgSpace requirement (W x D x H): 0,73 x 0,6 x 1,6 mCondition: very goodWorking hour: 37095 hwell-kept robot, usable immediatelyAccessory: Documentation, all cables
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
14
Trabajo de metales y máquinas herramientaFresadoras
X: 4050 mmY: 2050 mmZ: 250 mmMounting table: 4200 x 2150 mmSpeed range: 12 kW - 36.000 rpmTaper fixture: HSK E40Control: MDSI 6.0 on XP computerTool changer: 10 -stationTool diameter: 13 mmHours of operation: 23589 hSpindle on: 7736 hTotal power: 15 kWWeight of machine: 4900 kgSpace requirement (W x D x H): 6,7 x 3,12 x 2,6 mCondition: goodtool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service techniciansAccessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
12
Maquinaria para el trabajo de maderaAserradoSierras de cinta
Cutting diameter: 400 mmSection thickness: 500 mmSectional area 90° circular: 400 mmSectional area 90° flat: 500 X 400 mmCutting speed: stepless from 15 to 150 m/minWorking height: 750 mmSaw blade dimensions: 6220 X 41 X 1,3 mmRemaining piece length: automat 110 mmSmallest diameter: 5 mmChip conveyor: yesFeed length: 0 - 600 mmLowering speed: 0 - 750 mm/sec.Material weight: 500 kgWorking hour: 4500 hTotal power: 8,0 kWWeight of machine: 1950 kgSpace requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m mCutting area rectangle: 500 x 410 mmneat machine, without roller conveyorsAccessory: 2 new saw blades, documentation
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 new saw blades, documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 new saw blades, documentation
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
13
Trabajo de metales y máquinas herramientaAcabado de superficie
Ultrasonic power: 8,4 kWComponent weight max.: 5000 kgVolume: 2000 ltrHeating capacity: 51 kWInternal usable dimensions L/W/H: 1600/ 1000/ 1250 mmSpace requirement (W x D x H): 12 x 3,2 x 2,1 mTotal power: 60 kWCondition: very goodmold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good
mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good
mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
El anuncio ha sido traducido automáticamente y pueden haber ocurrido algunos errores de traducción