5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines d'estampage et de pliage
Rivet diameter: 1 - 4 / 2 - 6 mmRiveting force: 3 / 6 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 170 mmMounting table: 320 x 290 mmWeight of machine: 240 kgTotal power: 0,74 kWSpace requirement (W x D x H): 0,45 x 0,7 x 0,7 mCondition: very goodwell-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines et équipements de coupeMachines de découpe laser
X: 1300 mmY: 1300 mmMax. workpiece dimension: 1500 x 1500 x 135 mmRepeatability: 0,025Wavelength: 10,6 micrometerWorking hour: Laser 6135, Gravierer 18.743 hSpace requirement (W x D x H): 2,4 x 2,0 x 1,4 mTotal power: 2,3 kWWeight of machine: 1200 kgCondition: gutType: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines d'emballageMachines d'emballage
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Autres machines
Load capacity: 27 kgWeight of machine: 100 kgSpace requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 mCondition: very goodGripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 mAccessory: no further accessories
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Machines d'emballageMachines d'emballage
Product witdh: 45 - 400 mmProduct hight: 1 - 200 mmProduct length: 50 - unlimited mmPower: max. 60 stroke/minTransport speed: 8 - 30 m/minFilm thickness: 10 - 80 µmTemperature range: 170 ° CTotal power: 25 kWWeight of machine: 2.100 kgSpace requirement (W x D x H): 11,5 x 2,4 x 2,0 mSystem structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
Product witdh: 45 - 400 mm
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines d'estampage et de pliage
Rivet diameter: 2 - 6 / 2 - 7 mmRiveting force: 6,5 / 8,2 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 159 mmMounting table: 240 x 247 mmWeight of machine: 180 kgTotal power: 0,37 kWSpace requirement (W x D x H): 0,4 x 0,6 x 0,8 mCondition: very goodvery nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines d'estampage et de pliage
Rivet diameter: 2 - 6 / 2 - 7 mmRiveting force: 6,5 / 8,2 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 159 mmMounting table: 240 x 247 mmWeight of machine: 180 kgTotal power: 0,37 kWSpace requirement (W x D x H): 0,4 x 0,6 x 0,8 mCondition: very goodvery nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Module solaire Maysun Solar, MSE-07 370 Wc - noir intégral, module mono PU, 1755 mm x 1038 mm x 30 mm, longueur du câble de raccordement 110 cm, collecte uniquement
Module solaire Maysun Solar, MSE-07 370 Wc - noir intégral, module mono PU, 1755 mm x 1038 mm x 30 mm, longueur du câble de raccordement 110 cm, collecte uniquement
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Travail des métaux et machines-outilsFraiseusesAutres
X: 560 mmY: 500 mmZ: 390 mmRapid: 4 m/minTable load: 800 kgSpeed range: 4000 rpmTaper fixture: SK 40Speed range head stock: 4000 rmpSpindle drive: 4 kWControl: Dialog 11Electrical hand wheel: yesCoolant system: yesDirect path measuring system: yesDocumentation: yesTotal power: 19 kWWeight of machine: 2900 kgSpace requirement (W x D x H): 3,66 x 3,5 x 2,1 mCondition: very goodless operating hours, can be inspected under powerAccessory: complete documentation
X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Travail des métaux et machines-outilsFraiseusesAutres
X: 1050 mmY: 920 mmZ: 110 mmTable size: 1000 x 1000 mmSpeed range: 18.000 rpmTaper fixture: SK 25Tool changer: 6 -stationMax. workpiece dimension: Ø 65 mm, hight 65 mmControl: Bosch CC 120Total power: 12 kWWeight of machine: 900 kgSpace requirement (W x D x H): 1,7 x 1,9 x 2,0 mMilling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shiftAccessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines à souderAutres
Max. welding current: 200 AMax. welding voltage: 27 VTotal power: 10,6 kWWeight of machine: 88 kgSpace requirement (W x D x H): 0,376 x 0,684 x 0,381 mwith wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsPerceuses et aléseuses
Mounting table: 300 x 400 mmQuill ram: 120 mmSpeed range: 5800 rpmGearbox stages: 2Feed: 0,001 - 3,5 m/minRapid: 3,5 m/minTaper fixture: MK 3Thread cutting device: with foot switchCoolant system: yesTotal power: 1,5 kWWeight of machine: 380 kgSpace requirement (W x D x H): 0,66 x 0,44 x 1,95 mCondition: very goodHigh-performance drilling machine, machine number 511Accessory: documentation, coolant equipment
Mounting table: 300 x 400 mm
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseusesAutres
X: 650 mmY: 510 mmZ: 510 mmMounting table: 800 x 450 mmT-tongues: size/quantity/distanceTable load: max. 400 kgWorking height: 760 mmSpindle diameter: 65 mmSpeed range: 8000 rpmSpindle power: 7/9,25 kWTool holder: SK 40Tool changer: 16 -stationTool diameter: 80 mmMax. length tool: 250 mmMax. weight tool: 6 kgRapid: 16000 m/minControl: Siemens 802DWeight of machine: 3500 kgSpace requirement (W x D x H): 2,15 x 2,1 x 2,45 mCondition: working conditionWorking hour: 9325 hAccessory: Documentation, no futher accessories
X: 650 mm
Y: 510 mm
Z: 510 mm
Mounting table: 800 x 450 mm
T-tongues: size/quantity/distance
Table load: max. 400 kg
Working height: 760 mm
Spindle diameter: 65 mm
Speed range: 8000 rpm
Spindle power: 7/9,25 kW
Tool holder: SK 40
Tool changer: 16 -station
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Rapid: 16000 m/min
Control: Siemens 802D
Weight of machine: 3500 kg
Space requirement (W x D x H): 2,15 x 2,1 x 2,45 m
Condition: working condition
Working hour: 9325 h
Accessory: Documentation, no futher accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 510 mm
Z: 510 mm
Mounting table: 800 x 450 mm
T-tongues: size/quantity/distance
Table load: max. 400 kg
Working height: 760 mm
Spindle diameter: 65 mm
Speed range: 8000 rpm
Spindle power: 7/9,25 kW
Tool holder: SK 40
Tool changer: 16 -station
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Rapid: 16000 m/min
Control: Siemens 802D
Weight of machine: 3500 kg
Space requirement (W x D x H): 2,15 x 2,1 x 2,45 m
Condition: working condition
Working hour: 9325 h
Accessory: Documentation, no futher accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Travail des métaux et machines-outilsMachines à souderRobots
Load capacity: 16 kgRange working radius: 1550 mmControl Modul: IRC5 M2004Robot version: IRB 2400/16 Type B - M2004Teach Panel: FlexPendantRemote I/O Unit: DSQC 350ANumber of axes: 6Total power: 1 kWWeight of machine: 800 kgSpace requirement (W x D x H): 0,73 x 0,6 x 1,6 mCondition: very goodWorking hour: 37095 hwell-kept robot, usable immediatelyAccessory: Documentation, all cables
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseuses
X: 4050 mmY: 2050 mmZ: 250 mmMounting table: 4200 x 2150 mmSpeed range: 12 kW - 36.000 rpmTaper fixture: HSK E40Control: MDSI 6.0 on XP computerTool changer: 10 -stationTool diameter: 13 mmHours of operation: 23589 hSpindle on: 7736 hTotal power: 15 kWWeight of machine: 4900 kgSpace requirement (W x D x H): 6,7 x 3,12 x 2,6 mCondition: goodtool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service techniciansAccessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseusesAutres
X: 1050 mmY: 600 mmZ: 600 mmTable size: 1150 x 600 mmSpeed range: 8.000 rpmTaper fixture: BT 40Internal coolant: 20 barTool changer: 24 -stationControl: Fanuc 0i-MDHours of operation: 31575 hProgram run: 8510 hTotal power: 40 kWWeight of machine: 7.200 kgSpace requirement (W x D x H): 4,0 x 2,2 x 2,7 mCondition: very goodfiltration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured visesAccessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Machines à boisSciageScies à courroies
Cutting diameter: 400 mmSection thickness: 500 mmSectional area 90° circular: 400 mmSectional area 90° flat: 500 X 400 mmCutting speed: stepless from 15 to 150 m/minWorking height: 750 mmSaw blade dimensions: 6220 X 41 X 1,3 mmRemaining piece length: automat 110 mmSmallest diameter: 5 mmChip conveyor: yesFeed length: 0 - 600 mmLowering speed: 0 - 750 mm/sec.Material weight: 500 kgWorking hour: 4500 hTotal power: 8,0 kWWeight of machine: 1950 kgSpace requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m mCutting area rectangle: 500 x 410 mmneat machine, without roller conveyorsAccessory: 2 new saw blades, documentation
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 new saw blades, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 new saw blades, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Travail des métaux et machines-outilsTraitement de surface
Puissance ultrasonique : 8,4 kW
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
Puissance ultrasonique : 8,4 kW
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.