4
Travail des métaux et machines-outilsPressesPresses excentriques
Bending force: 160 toTable length: 1100 mmTable width: 700 mmHole in table: 210 mmStroke: 15 - 110 mmStrokes: 60 1/minRam: 630x400 mmRam adjustment: 95 mmThroat depth: 325 mmLength: 2400 mmWidth: 1430 mmHeight: 3200 mmWeight: 9950 kg
Bending force: 160 to
Table length: 1100 mm
Table width: 700 mm
Hole in table: 210 mm
Stroke: 15 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 95 mm
Throat depth: 325 mm
Length: 2400 mm
Width: 1430 mm
Height: 3200 mm
Weight: 9950 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Table length: 1100 mm
Table width: 700 mm
Hole in table: 210 mm
Stroke: 15 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 95 mm
Throat depth: 325 mm
Length: 2400 mm
Width: 1430 mm
Height: 3200 mm
Weight: 9950 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPressesPresses excentriques
Bending force: 130 toTable length: 1000 mmTable width: 640 mmHole in table: 210 mmStroke: 5 - 110 mmStrokes: 60 1/minRam: 630x400 mmRam adjustment: 90 mmThroat depth: 330 mmMotor: 11 kWLength: 2200 mmWidth: 1372 mmHeight: 3000 mmWeight: 8200 kg
Bending force: 130 to
Table length: 1000 mm
Table width: 640 mm
Hole in table: 210 mm
Stroke: 5 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 90 mm
Throat depth: 330 mm
Motor: 11 kW
Length: 2200 mm
Width: 1372 mm
Height: 3000 mm
Weight: 8200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Table length: 1000 mm
Table width: 640 mm
Hole in table: 210 mm
Stroke: 5 - 110 mm
Strokes: 60 1/min
Ram: 630x400 mm
Ram adjustment: 90 mm
Throat depth: 330 mm
Motor: 11 kW
Length: 2200 mm
Width: 1372 mm
Height: 3000 mm
Weight: 8200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à grignoter
Punching power: 30 tonWorking area: 2500x1250 mmX-axis movement (+repositioning): 2500 mmY-axis movement: 1250 mmspeed of X-axis: 116 m/Minspeed of Y-axis: 80 m/minspeed combined X+Y: 140 m/minStroke: 40 mmMax. strokes (in 1 mm steps, 1 mm thickness): 1200 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 425 1/minMax. strokes at marking: 3200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 22 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 120 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 15 kWHeight: 2310 mmWidth without light barrier: 5360 mmWidth with light barrier: 7360 mmLength without light barrier: 5750 mmLength with light barrier: 6800 mmWeight: 12960 kg
Punching power: 30 ton
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Working area: 2500x1250 mm
X-axis movement (+repositioning): 2500 mm
Y-axis movement: 1250 mm
speed of X-axis: 116 m/Min
speed of Y-axis: 80 m/min
speed combined X+Y: 140 m/min
Stroke: 40 mm
Max. strokes (in 1 mm steps, 1 mm thickness): 1200 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 425 1/min
Max. strokes at marking: 3200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 22 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 120 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 15 kW
Height: 2310 mm
Width without light barrier: 5360 mm
Width with light barrier: 7360 mm
Length without light barrier: 5750 mm
Length with light barrier: 6800 mm
Weight: 12960 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à grignoter
Punching power: 20 tonWorking area: 2000x1250 mmX-axis movement (+repositioning): 2000 mmY-axis movement: 1250 mmspeed of X-axis: 90 m/Minspeed of Y-axis: 70 m/minspeed combined X+Y: 114 m/minMax. strokes (in 1 mm steps, 1 mm thickness): 1100 1/minMax. strokes (in 25 mm steps, 1 mm thickness): 375 1/minMax. strokes at marking: 1200 1/minMax. cutting thickness with fix tool station steel: 6 mmmax. cutting thickness with fix tool station stainless steel: 3 mmMax. cutting thickness with index tool station steel: 3 mmMax. cutting thickness with index tool station stainless steel: 1.5 mmNumber of stations: 27Turret rotation speed: 30 rpmAutoindex-rotation speed: 150 rpmMax. work piece weight: 100 kgTable height: 940 mmAir pressure: 6 barMax. punching diameter (D-station): 88.9 mmMotor power: 7.5 kWHeight: 2310 mmWidth without light barrier: 4200 mmWidth with light barrier: 6200 mmLength without light barrier: 5600 mmLength with light barrier: 6600 mmWeight: 11000 kg
Punching power: 20 ton
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Weight: 11000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Working area: 2000x1250 mm
X-axis movement (+repositioning): 2000 mm
Y-axis movement: 1250 mm
speed of X-axis: 90 m/Min
speed of Y-axis: 70 m/min
speed combined X+Y: 114 m/min
Max. strokes (in 1 mm steps, 1 mm thickness): 1100 1/min
Max. strokes (in 25 mm steps, 1 mm thickness): 375 1/min
Max. strokes at marking: 1200 1/min
Max. cutting thickness with fix tool station steel: 6 mm
max. cutting thickness with fix tool station stainless steel: 3 mm
Max. cutting thickness with index tool station steel: 3 mm
Max. cutting thickness with index tool station stainless steel: 1.5 mm
Number of stations: 27
Turret rotation speed: 30 rpm
Autoindex-rotation speed: 150 rpm
Max. work piece weight: 100 kg
Table height: 940 mm
Air pressure: 6 bar
Max. punching diameter (D-station): 88.9 mm
Motor power: 7.5 kW
Height: 2310 mm
Width without light barrier: 4200 mm
Width with light barrier: 6200 mm
Length without light barrier: 5600 mm
Length with light barrier: 6600 mm
Weight: 11000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 2035 mmSheet thickness (420 N/mm²): 4.5 mmSheet thickness (600 N/mm²): 3 mmMax. bending angle: 135 °Motor: 5.5 kWLength: 3300 mmWidth: 1550 mmHeight: 1900 mmWeight: 3200 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 4.5 mm
Sheet thickness (600 N/mm²): 3 mm
Max. bending angle: 135 °
Motor: 5.5 kW
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Sheet thickness (420 N/mm²): 4.5 mm
Sheet thickness (600 N/mm²): 3 mm
Max. bending angle: 135 °
Motor: 5.5 kW
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 40 toBending length: 2000 mmAxes: X and Y axisStroke: 100 mmDaylight: 310 mmPower concept: hydraulicOiltank: 38 lMotor: 6 kWBack gauge: 420 mmDie: 1Geschwindigkeit: 10 mm/sRetraction speed: 12 mm/sBack gauge speed: 40 mm/sAccuracy press beam: 0.02 +/- mmBack gauge accuracy: 0.05 +/- mmLength: 1750 mmWidth: 950 mmHeight: 1900 mmWeight: 2100 kg
Bending force: 40 to
Bending length: 2000 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 2000 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 220 toBending length: 4050 mmAxes: Y1 / Y2 / X and R axisrapid speed Y-axis: 200 mm/sStroke: 265 mmInside distance between side frames: 3600 mmGap in side frame: 410 mmDaylight: 530 mmPower concept: hydraulicWorking speed Y-axis: 12Retractionspeed Y-axis: 180Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmMotor: 2 x 11 kWLength: 5250 mmWidth: 1770 mmHeight: 2900 mmWeight: 15000 kg
Bending force: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
rapid speed Y-axis: 200 mm/s
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 11 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
rapid speed Y-axis: 200 mm/s
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 11 kW
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 220 toBending length: 3050 mmAxes: Y1 / Y2 / X and R axisrapid speed Y-axis: 200 mm/sStroke: 265 mmInside distance between side frames: 2600 mmGap in side frame: 410 mmDaylight: 530 mmPower concept: hydraulicWorking speed Y-axis: 12Retractionspeed Y-axis: 180Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmMotor: 2 x 11 kWLength: 4250 mmWidth: 1770 mmHeight: 2900 mmWeight: 12250 kg
Bending force: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
rapid speed Y-axis: 200 mm/s
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
rapid speed Y-axis: 200 mm/s
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 135 toBending length: 3050 mmAxes: Y1 / Y2 / X and R axisrapid speed Y-axis: 200 mm/sStroke: 265 mmInside distance between side frames: 2600 mmGap in side frame: 410 mmDaylight: 530 mmPower concept: hydraulicWorking speed Y-axis: 10Retractionspeed Y-axis: 200Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmMotor: 2 x 4 kWLength: 4200 mmWidth: 1680 mmHeight: 2750 mmWeight: 9500 kg
Bending force: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
rapid speed Y-axis: 200 mm/s
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 4 kW
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
rapid speed Y-axis: 200 mm/s
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 4 kW
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 4010 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.25 mmCutting capacity electrical shear: 1.25 mmNo. of stand and tension arm units: 4No. of driven linkage assemblies: 4Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 2.2 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2600 kg
Bending length: 4010 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 100 toBending length: 2550 mmAxes: Y1 / Y2 / X axisrapid speed Y-axis: 180 mm/sStroke: 265 mmInside distance between side frames: 2200 mmGap in side frame: 450 mmDaylight: 530 mmPower concept: hydraulicWorking speed Y-axis: 10Retractionspeed Y-axis: 120Back gauge speed X-axis: 500Back gauge speed R-axis: 350 mm/sBack gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmOiltank: 100 lMotor power: 11 kWLength: 3800 mmWidth: 1670 mmHeight: 2850 mmWeight: 7800 kg
Bending force: 100 to
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
rapid speed Y-axis: 180 mm/s
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
rapid speed Y-axis: 180 mm/s
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleRedresseurs d'aliments
Sheet Thickness - mild steel: 0.4 - 3.5 mmMax. sheet width: 200 mmMax. cross-section: 200 x 3 mmFeed roll diameter: 80 mmMotor torque: 10 Nm
Sheet Thickness - mild steel: 0.4 - 3.5 mm
Max. sheet width: 200 mm
Max. cross-section: 200 x 3 mm
Feed roll diameter: 80 mm
Motor torque: 10 Nm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. sheet width: 200 mm
Max. cross-section: 200 x 3 mm
Feed roll diameter: 80 mm
Motor torque: 10 Nm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1050 mmMax. bending capacity - mild steel: 5Upper roll diameter: 130 mmBending speed: 3 m/minMotor power: 2.2 kWLength: 2200 mmWidth: 750 mmHeight: 1000 mmWeight: 1200 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 5
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Machines d'impressionMachine d'impression et de découpe d'étiquettes
Machine de découpe semi-automatique Wookil WTNS 1700
Année 2000
Taille maximale 1200x 1700 mm
Taille minimale : 600 x 850 mm
Pression maximale 350 tonnes
Machine de découpe semi-automatique Wookil WTNS 1700
Année 2000
Taille maximale 1200x 1700 mm
Taille minimale : 600 x 850 mm
Pression maximale 350 tonnes
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Année 2000
Taille maximale 1200x 1700 mm
Taille minimale : 600 x 850 mm
Pression maximale 350 tonnes
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18140Producer: BATTENFELDYear of construction: 2006Clamping unitClamping force: 25 tonOpening stroke: 450 mmDistance between tie bars: 270 X 270 mmMould height min.: 150 mmInjection unitScrew diameter: 14 mmInjection volume: 15 cm³Shot weight: 7 gInjection pressure: 2650 barMeasurements and weightDimensions: 2,25 X 0,90 X 1,30 mMachine weight: 1100 kg
Ref. no.: 18140
Producer: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: BATTENFELD
Year of construction: 2006
Clamping unit
Clamping force: 25 ton
Opening stroke: 450 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 14 mm
Injection volume: 15 cm³
Shot weight: 7 g
Injection pressure: 2650 bar
Measurements and weight
Dimensions: 2,25 X 0,90 X 1,30 m
Machine weight: 1100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18138Producer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 850 mmDistance between tie bars: 370 X 3370 mmMould height min.: 200 mmMould height max.: 510 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 22 mmInjection volume: 37 cm³Shot weight: 32 gInjection pressure: 2580 barMeasurements and weightDimensions: 4,50 X 1,28 X 1,95 mMachine weight: 4750 kg
Ref. no.: 18138
Producer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 3370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 3370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection multi-composants
Ref. no.: 18092Producer: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 25250 kg
Ref. no.: 18092
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 17514Producer: BILLIONYear of construction: 2011Clamping unitClamping force: 50 tonOpening stroke: 250 mmDistance between tie bars: 350 x 300 mmMould height min.: 150 mmMould height max.: 400 mmPlaten size (h x v): 490 x 440 mmInjection unitScrew diameter: 25 mmInjection volume: 39 cm³Shot weight: 35 gInjection pressure: 2040 barMeasurements and weightDimensions: 3,7 x 1,4 x 1,8 mMachine weight: 3200 kgAdditional information & extrasHot runner systems: 6 pcs.
Ref. no.: 17514
Producer: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: BILLION
Year of construction: 2011
Clamping unit
Clamping force: 50 ton
Opening stroke: 250 mm
Distance between tie bars: 350 x 300 mm
Mould height min.: 150 mm
Mould height max.: 400 mm
Platen size (h x v): 490 x 440 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2040 bar
Measurements and weight
Dimensions: 3,7 x 1,4 x 1,8 m
Machine weight: 3200 kg
Additional information & extras
Hot runner systems: 6 pcs.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 17507Producer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg
Ref. no.: 17507
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Réf. n° : 16369
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
Réf. n° : 16369
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPonceusesAccessoires et pièces détachées
Broche de machine pour entraînement par courroie et entraînement direct, 2500 tr/min, révisée en 03/03 et n'est plus utilisée, emballage d'origine de GMN, n° de série. 280217, utilisé, en pleine fonction
Broche de machine pour entraînement par courroie et entraînement direct, 2500 tr/min, révisée en 03/03 et n'est plus utilisée, emballage d'origine de GMN, n° de série. 280217, utilisé, en pleine fonction
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsToursTours à tourelle
Turning diameter: 340 mmTurning length: 1050 mmCentre height: 170 mmSpeed range: 20 - 2500 rpmQuill ram: 160 mmChucks: Ø 250 mm - 4 jawsSpindle bore: 55 mmSpace requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 mWeight of machine: 2.200 kgTotal power: 5,5 kWCondition: gutAccessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
Turning diameter: 340 mm
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: gut
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Turning length: 1050 mm
Centre height: 170 mm
Speed range: 20 - 2500 rpm
Quill ram: 160 mm
Chucks: Ø 250 mm - 4 jaws
Spindle bore: 55 mm
Space requirement (W x D x H): approxim. 3,0 x 1,1 x 1,4 m
Weight of machine: 2.200 kg
Total power: 5,5 kW
Condition: gut
Accessory: 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, steady rest
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Machines à boisSciageScies à courroies
Cutting diameter: 340 x 200 mmSectional area 45° circular: 230 mmCutting speed: 20 - 120 m/minStop: 600 mmSaw blade dimensions: 4770-4870 x 32 x 1 mmTotal power: 4 kWWeight of machine: 1400 kgSpace requirement (W x D x H): 2,6 x 1,4 x 1,6 msemi-automatic operation, robust machine, good condition, ready to use
Cutting diameter: 340 x 200 mm
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Sectional area 45° circular: 230 mm
Cutting speed: 20 - 120 m/min
Stop: 600 mm
Saw blade dimensions: 4770-4870 x 32 x 1 mm
Total power: 4 kW
Weight of machine: 1400 kg
Space requirement (W x D x H): 2,6 x 1,4 x 1,6 m
semi-automatic operation, robust machine, good condition, ready to use
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsFraiseusesAutres
X: 500 mmY: 360 mmZ: 400 mmSpeed range: 40 - 2000 rpmTaper fixture: SK 40 DIN2079Control: Heidenhain TNC 155Total power: 6 kWWeight of machine: 2000 kgSpace requirement (W x D x H): 2,8 x 2,9 x 1,9 mCondition: good, ready for operationunder power, ready for inspectionAccessory: docmentation
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines et équipements de coupeMachines de découpe laser
X: 1300 mmY: 1300 mmMax. workpiece dimension: 1500 x 1500 x 135 mmRepeatability: 0,025Wavelength: 10,6 micrometerWorking hour: Laser 6135, Gravierer 18.743 hSpace requirement (W x D x H): 2,4 x 2,0 x 1,4 mTotal power: 2,3 kWWeight of machine: 1200 kgCondition: gutType: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines à souderAutres
Max. welding current: 200 AMax. welding voltage: 27 VTotal power: 10,6 kWWeight of machine: 88 kgSpace requirement (W x D x H): 0,376 x 0,684 x 0,381 mwith wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Travail des métaux et machines-outilsMachines à souderRobots
Load capacity: 16 kgRange working radius: 1550 mmControl Modul: IRC5 M2004Robot version: IRB 2400/16 Type B - M2004Teach Panel: FlexPendantRemote I/O Unit: DSQC 350ANumber of axes: 6Total power: 1 kWWeight of machine: 800 kgSpace requirement (W x D x H): 0,73 x 0,6 x 1,6 mCondition: very goodWorking hour: 37095 hwell-kept robot, usable immediatelyAccessory: Documentation, all cables
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseuses
X: 4050 mmY: 2050 mmZ: 250 mmMounting table: 4200 x 2150 mmSpeed range: 12 kW - 36.000 rpmTaper fixture: HSK E40Control: MDSI 6.0 on XP computerTool changer: 10 -stationTool diameter: 13 mmHours of operation: 23589 hSpindle on: 7736 hTotal power: 15 kWWeight of machine: 4900 kgSpace requirement (W x D x H): 6,7 x 3,12 x 2,6 mCondition: goodtool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service techniciansAccessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseusesAutres
X: 1050 mmY: 600 mmZ: 600 mmTable size: 1150 x 600 mmSpeed range: 8.000 rpmTaper fixture: BT 40Internal coolant: 20 barTool changer: 24 -stationControl: Fanuc 0i-MDHours of operation: 31575 hProgram run: 8510 hTotal power: 40 kWWeight of machine: 7.200 kgSpace requirement (W x D x H): 4,0 x 2,2 x 2,7 mCondition: very goodfiltration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured visesAccessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Travail des métaux et machines-outilsTraitement de surface
Puissance ultrasonique : 8,4 kW
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
Puissance ultrasonique : 8,4 kW
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Machines de traitement du plastiquePresses
Druck: 650 tDurchgangsbreite: 920 mmHub: 1500 mmTischfläche: 2000x1500 mmStößelfläche: 2000x1500 mmEinbauhöhe: 2100 mmHydraulik: 250 barSchließgeschwindigkeit: 500 mm/secPreßgeschwindigkeit: 0,5-10,4 mm/secLoch im Stößel Durchmesser/Tiefe: mmÖffnungsgeschwindigkeit: 250 mm/250Gesamtleistungsbedarf: kWMaschinengewicht ca.: 47 tRaumbedarf ca.: m
Druck: 650 t
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Durchgangsbreite: 920 mm
Hub: 1500 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 250 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsMachines de fluotournage
Arbeitsbereich: 12-60 mmGeschwindigkeit: 60/120 m/minStangenlängen: 4000 mmVorschub: 0-5 mm/UWalzkraft: 500-40000 NGewicht: 1200 kgGesamtleistungsbedarf: 3 kW
Arbeitsbereich: 12-60 mm
Geschwindigkeit: 60/120 m/min
Stangenlängen: 4000 mm
Vorschub: 0-5 mm/U
Walzkraft: 500-40000 N
Gewicht: 1200 kg
Gesamtleistungsbedarf: 3 kW
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Geschwindigkeit: 60/120 m/min
Stangenlängen: 4000 mm
Vorschub: 0-5 mm/U
Walzkraft: 500-40000 N
Gewicht: 1200 kg
Gesamtleistungsbedarf: 3 kW
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsAutres
Tischdurchmesser: 900 mmTischbelastung: 3000 kgEinbauhöhe: 580Hub: 95-800 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 8 tRaumbedarf ca.: m
Tischdurchmesser: 900 mm
Tischbelastung: 3000 kg
Einbauhöhe: 580
Hub: 95-800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Tischbelastung: 3000 kg
Einbauhöhe: 580
Hub: 95-800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 8 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à tailler les engrenagesFraiseuses à engrenages
Raddurchmesser - max.: 2000 mmRadbreite: . mmModul - max.: 22größter Fräserdurchmesser: 250 mmFräserdrehzahlen: 16-92 U/minGesamtleistungsbedarf: 13 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Raddurchmesser - max.: 2000 mm
Radbreite: . mm
Modul - max.: 22
größter Fräserdurchmesser: 250 mm
Fräserdrehzahlen: 16-92 U/min
Gesamtleistungsbedarf: 13 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Radbreite: . mm
Modul - max.: 22
größter Fräserdurchmesser: 250 mm
Fräserdrehzahlen: 16-92 U/min
Gesamtleistungsbedarf: 13 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines et équipements de coupeÉquipements et machines de coupe à jet d'eau
x-Weg: 6000 mmy-Weg: 3000 mmz-Weg: 230 mmPumpenleistung: 3600 barWerkstückdicke - max.: 200 mmTischbelastung: 28 tVorschub: 84 m/minTisch: 6000x300 mmSteuerung: By VisionGesamtleistungsbedarf: kWMaschinengewicht ca.: 16,7 tRaumbedarf ca.: m
x-Weg: 6000 mm
y-Weg: 3000 mm
z-Weg: 230 mm
Pumpenleistung: 3600 bar
Werkstückdicke - max.: 200 mm
Tischbelastung: 28 t
Vorschub: 84 m/min
Tisch: 6000x300 mm
Steuerung: By Vision
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 16,7 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
y-Weg: 3000 mm
z-Weg: 230 mm
Pumpenleistung: 3600 bar
Werkstückdicke - max.: 200 mm
Tischbelastung: 28 t
Vorschub: 84 m/min
Tisch: 6000x300 mm
Steuerung: By Vision
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 16,7 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines et équipements de coupeÉquipements et machines de coupe à jet d'eau
x-Weg: 4000 mmy-Weg: 3000 mmz-Weg: 230 mmPumpenleistung: 3600 barWerkstückdicke - max.: 200 mmTischbelastung: 14 tVorschub: 84 m/minTisch: 4000x300 mmSteuerung: By VisionGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 4000 mm
y-Weg: 3000 mm
z-Weg: 230 mm
Pumpenleistung: 3600 bar
Werkstückdicke - max.: 200 mm
Tischbelastung: 14 t
Vorschub: 84 m/min
Tisch: 4000x300 mm
Steuerung: By Vision
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
y-Weg: 3000 mm
z-Weg: 230 mm
Pumpenleistung: 3600 bar
Werkstückdicke - max.: 200 mm
Tischbelastung: 14 t
Vorschub: 84 m/min
Tisch: 4000x300 mm
Steuerung: By Vision
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines et équipements de coupeÉquipements et machines de coupe à jet d'eau
x-Weg: 4000 mmy-Weg: 2200 mmz-Weg: 250 mmPumpenleistung: 3400 barBetriebsstunden: 22000 hWerkstückdicke - max.: 200 mmTischbelastung: 4 t/m²Vorschub: 84 m/minGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 4000 mm
y-Weg: 2200 mm
z-Weg: 250 mm
Pumpenleistung: 3400 bar
Betriebsstunden: 22000 h
Werkstückdicke - max.: 200 mm
Tischbelastung: 4 t/m²
Vorschub: 84 m/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
y-Weg: 2200 mm
z-Weg: 250 mm
Pumpenleistung: 3400 bar
Betriebsstunden: 22000 h
Werkstückdicke - max.: 200 mm
Tischbelastung: 4 t/m²
Vorschub: 84 m/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines à boisMachines de fabrication de fenêtresConvoyeurs à rouleaux
Rollenbahnlänge: 3000 mmRollenbreite: 600 mmRollenbahnbreite: 700 mmTragkraft: 2000 kgAbmessungen LxBxH: 3,5x1,2x0,75 m
Rollenbahnlänge: 3000 mm
Rollenbreite: 600 mm
Rollenbahnbreite: 700 mm
Tragkraft: 2000 kg
Abmessungen LxBxH: 3,5x1,2x0,75 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Rollenbreite: 600 mm
Rollenbahnbreite: 700 mm
Tragkraft: 2000 kg
Abmessungen LxBxH: 3,5x1,2x0,75 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à boisMachines de fabrication de fenêtresConvoyeurs à rouleaux
Rollenbahnlänge: 2800 mmRollenbreite: 720 mmRollenbahnbreite: 1000 mmTragkraft: 2000 kgHöhe: 760 mmAbmessungen LxBxH: 2,8x1x0,8 m
Rollenbahnlänge: 2800 mm
Rollenbreite: 720 mm
Rollenbahnbreite: 1000 mm
Tragkraft: 2000 kg
Höhe: 760 mm
Abmessungen LxBxH: 2,8x1x0,8 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Rollenbreite: 720 mm
Rollenbahnbreite: 1000 mm
Tragkraft: 2000 kg
Höhe: 760 mm
Abmessungen LxBxH: 2,8x1x0,8 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à boisMachines de fabrication de fenêtresConvoyeurs à rouleaux
Rollenbahnlänge: 2200 mmRollenbreite: 650 mmRollenbahnbreite: 900 mmTragkraft: 2000 kgAbmessungen LxBxH: 2,2x0,9x0,7 m
Rollenbahnlänge: 2200 mm
Rollenbreite: 650 mm
Rollenbahnbreite: 900 mm
Tragkraft: 2000 kg
Abmessungen LxBxH: 2,2x0,9x0,7 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Rollenbreite: 650 mm
Rollenbahnbreite: 900 mm
Tragkraft: 2000 kg
Abmessungen LxBxH: 2,2x0,9x0,7 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines à boisMachines de fabrication de fenêtresConvoyeurs à rouleaux
Arbeitslänge: . mmArbeitsbreite: . mmRollenbreite: . mmRollenbahnlänge: 5500 mmRollenbahnbreite: 1200 mmTragkraft: kg
Arbeitslänge: . mm
Arbeitsbreite: . mm
Rollenbreite: . mm
Rollenbahnlänge: 5500 mm
Rollenbahnbreite: 1200 mm
Tragkraft: kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Arbeitsbreite: . mm
Rollenbreite: . mm
Rollenbahnlänge: 5500 mm
Rollenbahnbreite: 1200 mm
Tragkraft: kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à boisMachines de fabrication de fenêtresConvoyeurs à rouleaux
Arbeitslänge: . mmArbeitsbreite: . mmRollenbreite: . mmRollenbahnlänge: 6000 mmRollenbahnbreite: 1200 mmTragkraft: kg
Arbeitslänge: . mm
Arbeitsbreite: . mm
Rollenbreite: . mm
Rollenbahnlänge: 6000 mm
Rollenbahnbreite: 1200 mm
Tragkraft: kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Arbeitsbreite: . mm
Rollenbreite: . mm
Rollenbahnlänge: 6000 mm
Rollenbahnbreite: 1200 mm
Tragkraft: kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsAutres
Druck: 1645 tHub: 1000 mmEinbauhöhe: 3000 mmSenkgeschwindigkeit: 280 mm/secRückzugsgeschwindigkeit: 275/346 mm/secStänderweite: 2520 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: t
Druck: 1645 t
Hub: 1000 mm
Einbauhöhe: 3000 mm
Senkgeschwindigkeit: 280 mm/sec
Rückzugsgeschwindigkeit: 275/346 mm/sec
Ständerweite: 2520 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Hub: 1000 mm
Einbauhöhe: 3000 mm
Senkgeschwindigkeit: 280 mm/sec
Rückzugsgeschwindigkeit: 275/346 mm/sec
Ständerweite: 2520 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsAutres
Nennleistung: 2000 KGBärhub: 1080 mmAusladung: 1100 mmSchlagleistung: 10000 kgmSchlagzahl: 125 Hub/minBärgewicht: 2300 kgArbeitshöhe: 620 mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: tRaumbedarf ca.: m
Nennleistung: 2000 KG
Bärhub: 1080 mm
Ausladung: 1100 mm
Schlagleistung: 10000 kgm
Schlagzahl: 125 Hub/min
Bärgewicht: 2300 kg
Arbeitshöhe: 620 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bärhub: 1080 mm
Ausladung: 1100 mm
Schlagleistung: 10000 kgm
Schlagzahl: 125 Hub/min
Bärgewicht: 2300 kg
Arbeitshöhe: 620 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsAutres
Bärgewicht: 1000 kgHub: 1000 mmAusladung: 800 mmSchlagleistung: 4200 mkpGesamtleistungsbedarf: . kWMaschinengewicht ca.: tRaumbedarf ca.: m
Bärgewicht: 1000 kg
Hub: 1000 mm
Ausladung: 800 mm
Schlagleistung: 4200 mkp
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Hub: 1000 mm
Ausladung: 800 mm
Schlagleistung: 4200 mkp
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsPonceusesRectifieuses cylindriques
Schleifdurchmesser: 660 mmSchleiflänge: 2000 mmWerkstückgewicht: 1500 kgSchleifscheibendurchmesser: 400 mmSteuerung: X-As. Diatos 602Gesamtleistungsbedarf: 12/22/30 kWMaschinengewicht ca.: tRaumbedarf ca.: m
Schleifdurchmesser: 660 mm
Schleiflänge: 2000 mm
Werkstückgewicht: 1500 kg
Schleifscheibendurchmesser: 400 mm
Steuerung: X-As. Diatos 602
Gesamtleistungsbedarf: 12/22/30 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Schleiflänge: 2000 mm
Werkstückgewicht: 1500 kg
Schleifscheibendurchmesser: 400 mm
Steuerung: X-As. Diatos 602
Gesamtleistungsbedarf: 12/22/30 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsPressesPresses à quatre colonnes
Druck: 650 tDurchgangsbreite: 920 mmHub: 1750 mmTischfläche: 2000x1500 mmStößelfläche: 2000x1500 mmEinbauhöhe: 2100 mmHydraulik: 203 barSchließgeschwindigkeit: 500 mm/secPreßgeschwindigkeit: 0,5-10,4 mm/secLoch im Stößel Durchmesser/Tiefe: mmÖffnungsgeschwindigkeit: 250 mm/250Rückzugskraft: 150 tGesamtleistungsbedarf: 75 kWMaschinengewicht ca.: 47 tRaumbedarf ca.: 4,4x2,5x7,5 m
Druck: 650 t
Durchgangsbreite: 920 mm
Hub: 1750 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 203 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Rückzugskraft: 150 t
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: 4,4x2,5x7,5 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Durchgangsbreite: 920 mm
Hub: 1750 mm
Tischfläche: 2000x1500 mm
Stößelfläche: 2000x1500 mm
Einbauhöhe: 2100 mm
Hydraulik: 203 bar
Schließgeschwindigkeit: 500 mm/sec
Preßgeschwindigkeit: 0,5-10,4 mm/sec
Loch im Stößel Durchmesser/Tiefe: mm
Öffnungsgeschwindigkeit: 250 mm/250
Rückzugskraft: 150 t
Gesamtleistungsbedarf: 75 kW
Maschinengewicht ca.: 47 t
Raumbedarf ca.: 4,4x2,5x7,5 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses
Blechbreite: 2100 mmBlechstärke: 20 mmAnbiegung: .Oberwalzen-Durchmesser: 300 mmUnterwalzen-Durchmesser: 400 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Blechbreite: 2100 mm
Blechstärke: 20 mm
Anbiegung: .
Oberwalzen-Durchmesser: 300 mm
Unterwalzen-Durchmesser: 400 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Blechstärke: 20 mm
Anbiegung: .
Oberwalzen-Durchmesser: 300 mm
Unterwalzen-Durchmesser: 400 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de découpe laser
Tischlänge: 3000 mmTischbreite: 1500 mmBrennerköpfe: 1Laserleistung in Watt: 2000Tisch:: 2x-Weg: 3010 mmy-Weg: 1510 mmz-Weg: 100 mmSteuerung: BoschTyp: CC320 Trumagraph mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 15,2 tRaumbedarf ca.: m
Tischlänge: 3000 mm
Tischbreite: 1500 mm
Brennerköpfe: 1
Laserleistung in Watt: 2000
Tisch:: 2
x-Weg: 3010 mm
y-Weg: 1510 mm
z-Weg: 100 mm
Steuerung: Bosch
Typ: CC320 Trumagraph mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 15,2 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Tischbreite: 1500 mm
Brennerköpfe: 1
Laserleistung in Watt: 2000
Tisch:: 2
x-Weg: 3010 mm
y-Weg: 1510 mm
z-Weg: 100 mm
Steuerung: Bosch
Typ: CC320 Trumagraph mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 15,2 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Travail des métaux et machines-outilsMachines à travailler la tôleBobines
Materialbreite: 1200 mmCoilgewicht: 10 tMaterialstärke: 8 mmInnendurchmesser: 500 mmCoilaußen - Durchmesser: 1300 mmHaspel: SchleicherRichtapparat: SchleicherVorschubantrieb: SchleicherGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Materialbreite: 1200 mm
Coilgewicht: 10 t
Materialstärke: 8 mm
Innendurchmesser: 500 mm
Coilaußen - Durchmesser: 1300 mm
Haspel: Schleicher
Richtapparat: Schleicher
Vorschubantrieb: Schleicher
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Coilgewicht: 10 t
Materialstärke: 8 mm
Innendurchmesser: 500 mm
Coilaußen - Durchmesser: 1300 mm
Haspel: Schleicher
Richtapparat: Schleicher
Vorschubantrieb: Schleicher
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.