5
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3660x27x0,9 mmBand speed continous: 20-100 m/minCutting capacity 0° round: 320 mmCutting capacity 0° square: 300 mmCutting capacity 0° rectangular: 320x300 mmWorking height: 640 mmCoolant pump motor: 0.12 kWHydraulic motor: 0.37 kWMotor: 2 kWLength: 1900 mmWidth: 850 mmHeight: 1300 mmWeight: 770 kg
Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° rectangular: 320x300 mm
Working height: 640 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 2 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° rectangular: 320x300 mm
Working height: 640 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Motor: 2 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleRedresseurs d'aliments
Min. coil inner diameter: 400 mmMax. Coil inner diameter: 700Max. coil width: 1500 mmLength: 2050 mmWidth: 820 mmHeight: 1000 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2550 mmMax. bending capacity - mild steel: 15Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mmMax. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mmUpper roll diameter: 270 mmLower roll diameter: 270 mmLateral roll diameter: 230 mmMax. opening: 50 mmWorking height: 1155 mmMotor power: 15 kWLength: 4760 mmWidth: 1660 mmHeight: 1155 mmWeight: 8950 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 15
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 4760 mm
Width: 1660 mm
Height: 1155 mm
Weight: 8950 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 15
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 4760 mm
Width: 1660 mm
Height: 1155 mm
Weight: 8950 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Machines de traitement du plastiqueMachines de moulage par injection
Ref. no.: 17146Hersteller: ENGELYear of construction: 2004Clamping unitClamping force: 300 tonOpening stroke: 855 mmInjection unitScrew diameter: 50 + 25 mmInjection volume: 393 + 49 cm³Shot weight: 354 + 44 gInjection pressure: 1917 + 1586 barMeasurements and weightDimensions: 6,5 x 2,3 x mMachine weight: 21000 kg
Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines alimentairesTechnologie de refroidissement
Linde Cryoline MT1250 Freezing tunnel, Serial: 5-199, 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, o
Linde Cryoline MT1250 Freezing tunnel, Serial: 5-199, 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, o
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsMachines à travailler la tôle
pressing capacity: 40 toStroke: 500 mmRam: 700x350 mmTable: 700x500 mmDaylight: 500 mmThroat depth: 250 mmRapid speed: 26 mm/sWorking speed: 9 mm/sMotor: 4 kWLength: 1500 mmWidth: 1000 mmHeight: 2500 mmWeight: 1500 kg
pressing capacity: 40 to
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 25Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mmMax. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mmUpper roll diameter: 360 mmLower roll diameter: 360 mmLateral roll diameter: 270 mmMax. opening: 60 mmWorking height: 1510 mmMotor power: 22 kWLength: 5560 mmWidth: 2060 mmHeight: 2050 mmWeight: 16750 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 360 mm
Lower roll diameter: 360 mm
Lateral roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1510 mm
Motor power: 22 kW
Length: 5560 mm
Width: 2060 mm
Height: 2050 mm
Weight: 16750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 360 mm
Lower roll diameter: 360 mm
Lateral roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1510 mm
Motor power: 22 kW
Length: 5560 mm
Width: 2060 mm
Height: 2050 mm
Weight: 16750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 16Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mmMax. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mmUpper roll diameter: 300 mmLower roll diameter: 300 mmLateral roll diameter: 240 mmMax. opening: 50 mmWorking height: 1140 mmMotor power: 18.5 kWLength: 5310 mmWidth: 1660 mmHeight: 1140 mmWeight: 11100 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 300 mm
Lower roll diameter: 300 mm
Lateral roll diameter: 240 mm
Max. opening: 50 mm
Working height: 1140 mm
Motor power: 18.5 kW
Length: 5310 mm
Width: 1660 mm
Height: 1140 mm
Weight: 11100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 300 mm
Lower roll diameter: 300 mm
Lateral roll diameter: 240 mm
Max. opening: 50 mm
Working height: 1140 mm
Motor power: 18.5 kW
Length: 5310 mm
Width: 1660 mm
Height: 1140 mm
Weight: 11100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 13Max. plate thickness without prebending - mild steel: 12 mmMax. plate thickness with prebending - mild steel: 8 mmMax. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mmUpper roll diameter: 270 mmLower roll diameter: 270 mmLateral roll diameter: 230 mmMax. opening: 50 mmWorking height: 1155 mmMotor power: 15 kWLength: 5310 mmWidth: 1660 mmHeight: 1590 mmWeight: 10050 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending - mild steel: 12 mm
Max. plate thickness with prebending - mild steel: 8 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 5310 mm
Width: 1660 mm
Height: 1590 mm
Weight: 10050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending - mild steel: 12 mm
Max. plate thickness with prebending - mild steel: 8 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 5310 mm
Width: 1660 mm
Height: 1590 mm
Weight: 10050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 8Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mmUpper roll diameter: 240 mmLower roll diameter: 240 mmLateral roll diameter: 190 mmWorking height: 825 mmMotor power: 11 kWLength: 4880 mmWidth: 1160 mmHeight: 1200 mmWeight: 6450 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 240 mm
Lower roll diameter: 240 mm
Lateral roll diameter: 190 mm
Working height: 825 mm
Motor power: 11 kW
Length: 4880 mm
Width: 1160 mm
Height: 1200 mm
Weight: 6450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 240 mm
Lower roll diameter: 240 mm
Lateral roll diameter: 190 mm
Working height: 825 mm
Motor power: 11 kW
Length: 4880 mm
Width: 1160 mm
Height: 1200 mm
Weight: 6450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2030 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending - mild steel: 6 mmMax. plate thickness with prebending - mild steel: 5 mmUpper roll diameter: 170 mmMotor power: 4 kWLength: 3600 mmWidth: 1020 mmHeight: 1120 mmWeight: 2400 kg
Bending length: 2030 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 5 mm
Upper roll diameter: 170 mm
Motor power: 4 kW
Length: 3600 mm
Width: 1020 mm
Height: 1120 mm
Weight: 2400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 5 mm
Upper roll diameter: 170 mm
Motor power: 4 kW
Length: 3600 mm
Width: 1020 mm
Height: 1120 mm
Weight: 2400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1530 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending - mild steel: 6 mmMax. plate thickness with prebending - mild steel: 4 mmUpper roll diameter: 150 mmMotor power: 4 kWLength: 3100 mmWidth: 1120 mmHeight: 1020 mmWeight: 2100 kg
Bending length: 1530 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 4 mm
Upper roll diameter: 150 mm
Motor power: 4 kW
Length: 3100 mm
Width: 1120 mm
Height: 1020 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 4 mm
Upper roll diameter: 150 mm
Motor power: 4 kW
Length: 3100 mm
Width: 1120 mm
Height: 1020 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2050 mmMax. bending capacity - mild steel: 30Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mmUpper roll diameter: 350 mmLower roll diameter: 350 mmLateral roll diameter: 260 mmBending speed: 1,5-5 m/minMotor power: 22 kWLength: 5000 mmWidth: 2000 mmHeight: 1900 mmWeight: 11000 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 20Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mmUpper roll diameter: 350 mmLower roll diameter: 350 mmLateral roll diameter: 260 mmBending speed: 1,5-5 m/minMotor power: 22 kWLength: 6000 mmWidth: 2200 mmHeight: 1900 mmWeight: 15000 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 6000 mm
Width: 2200 mm
Height: 1900 mm
Weight: 15000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 6000 mm
Width: 2200 mm
Height: 1900 mm
Weight: 15000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2050 mmMax. bending capacity - mild steel: 16Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mmUpper roll diameter: 260 mmLower roll diameter: 260 mmLateral roll diameter: 200 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 4300 mmWidth: 1600 mmHeight: 1550 mmWeight: 6100 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2050 mmMax. bending capacity - mild steel: 13Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mmUpper roll diameter: 245 mmLower roll diameter: 245 mmLateral roll diameter: 180 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 4300 mmWidth: 1600 mmHeight: 1470 mmWeight: 5450 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1470 mm
Weight: 5450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1470 mm
Weight: 5450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 10Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mmUpper roll diameter: 260 mmLower roll diameter: 260 mmLateral roll diameter: 200 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 5350 mmWidth: 1600 mmHeight: 1550 mmWeight: 7685 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2550 mmMax. bending capacity - mild steel: 10Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mmUpper roll diameter: 245 mmLower roll diameter: 245 mmLateral roll diameter: 180 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 4800 mmWidth: 1600 mmHeight: 1470 mmWeight: 6170 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 9Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mmUpper roll diameter: 245 mmLower roll diameter: 245 mmLateral roll diameter: 180 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 5350 mmWidth: 1600 mmHeight: 1470 mmWeight: 6850 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6850 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6850 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1550 mmMax. bending capacity - mild steel: 7Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mmUpper roll diameter: 150 mmLower roll diameter: 150 mmLateral roll diameter: 130 mmBending speed: 1,5-6 m/minMotor power: 4 kWLength: 3750 mmWidth: 960 mmHeight: 1100 mmWeight: 2500 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2050 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mmUpper roll diameter: 150 mmLower roll diameter: 150 mmLateral roll diameter: 130 mmBending speed: 1,5-6 m/minMotor power: 4 kWLength: 4250 mmWidth: 960 mmHeight: 1100 mmWeight: 2800 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1050 mmMax. bending capacity - mild steel: 3Max. plate thickness with prebending - mild steel: 2 mmUpper roll diameter: 90 mmLength: 2080 mmWidth: 700 mmHeight: 1250 mmWeight: 410 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Max. plate thickness with prebending - mild steel: 2 mm
Upper roll diameter: 90 mm
Length: 2080 mm
Width: 700 mm
Height: 1250 mm
Weight: 410 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 3
Max. plate thickness with prebending - mild steel: 2 mm
Upper roll diameter: 90 mm
Length: 2080 mm
Width: 700 mm
Height: 1250 mm
Weight: 410 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1270 mmMax. bending capacity - mild steel: 1.2Upper roll diameter: 68 mmMotor power: 1.5 kWLength: 1610 mmWidth: 700 mmHeight: 1160 mmWeight: 385 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 1.2
Upper roll diameter: 68 mm
Motor power: 1.5 kW
Length: 1610 mm
Width: 700 mm
Height: 1160 mm
Weight: 385 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 1.2
Upper roll diameter: 68 mm
Motor power: 1.5 kW
Length: 1610 mm
Width: 700 mm
Height: 1160 mm
Weight: 385 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1270 mmMax. bending capacity - mild steel: 5Upper roll diameter: 140 mmBending speed: 3 m/minMotor power: 2.2 kWLength: 2470 mmWidth: 750 mmHeight: 1000 mmWeight: 1350 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1350 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 5
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1350 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1550 mmMax. bending capacity - mild steel: 4Upper roll diameter: 140 mmBending speed: 3 m/minMotor power: 2.2 kWLength: 2700 mmWidth: 750 mmHeight: 1000 mmWeight: 1420 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1270 mmMax. bending capacity - mild steel: 4Upper roll diameter: 120 mmBending speed: 3 m/minMotor power: 2.2 kWLength: 2470 mmWidth: 750 mmHeight: 1000 mmWeight: 1110 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1050 mmMax. bending capacity - mild steel: 4Upper roll diameter: 110 mmMotor power: 2.2 kWLength: 1100 mmWidth: 750 mmHeight: 1000 mmWeight: 990 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2050 mmMax. bending capacity - mild steel: 3Upper roll diameter: 130 mmBending speed: 3 m/minMotor power: 2.2 kWLength: 3200 mmWidth: 750 mmHeight: 1000 mmWeight: 1500 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
pressing capacity: 150 toBending length: 1000 mmStroke: 300 mmMotor power: 11 kWDie: 1Distance between table and toolholder: 610 mmDistance between columns: 1020 mmWorking speed: 5 mm/sRapid speed: 10 mm/sMax. bending capacity (mild steel): 8 mmHole in table: 100 mmHole distance: 190 mmLength: 2110 mmWidth: 1000 mmHeight: 2450 mmWeight: 2400 kg
pressing capacity: 150 to
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôleEncocheuses
Blade length: 100 mmSheet thickness (420 N/mm²): 3 mmAngle: 90 °Weight: 90 kg
Blade length: 100 mm
Sheet thickness (420 N/mm²): 3 mm
Angle: 90 °
Weight: 90 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Sheet thickness (420 N/mm²): 3 mm
Angle: 90 °
Weight: 90 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3270x27x0,9 mmBand speed: 35/70 (PLC) m/minBand speed continous: 20-100 (CNC/Touch) m/minCutting capacity 0° round: 300 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 420x200 mmCutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mmCutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mmMin. rest piece length: 220 mmWorking height: 835 mmCoolant pump motor: 0.12 kWHydraulic motor: 0.37 kWLength: 3220 mmWidth: 2050 mmHeight: 1900 mmWeight: 1090 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Length: 3220 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Length: 3220 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Double columnBand dimensions: 3270x27x0,9 mmBand speed: 40/80 m/minCutting capacity 0° round: 300 mmCutting capacity 0° square: 300 mmCutting capacity 0° rectangular: 350x260 mmCutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mmCutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mmWorking height: 830 mmMotor: 1.5 kWLength: 1500 mmWidth: 1600 mmHeight: 1900 mmWeight: 590 kg
Saw frame: Double column
Band dimensions: 3270x27x0,9 mm
Band speed: 40/80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° rectangular: 350x260 mm
Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm
Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm
Working height: 830 mm
Motor: 1.5 kW
Length: 1500 mm
Width: 1600 mm
Height: 1900 mm
Weight: 590 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3270x27x0,9 mm
Band speed: 40/80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° rectangular: 350x260 mm
Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm
Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm
Working height: 830 mm
Motor: 1.5 kW
Length: 1500 mm
Width: 1600 mm
Height: 1900 mm
Weight: 590 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3270x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 420x200 mmCutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mmCutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mmCutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1600 mmHeight: 1800 mmWeight: 488 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1600 mm
Height: 1800 mm
Weight: 488 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1600 mm
Height: 1800 mm
Weight: 488 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3270x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 420x200 mmCutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mmCutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mmCutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1400 mmHeight: 1800 mmWeight: 438 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1400 mm
Height: 1800 mm
Weight: 438 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1400 mm
Height: 1800 mm
Weight: 438 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3120x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 350x140 mmCutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mmCutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mmCutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1550 mmHeight: 1750 mmWeight: 460 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3120 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 350x140 mmCutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mmCutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mmCutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mmWorking height: 830 mmLength: 1550 mmWidth: 1400 mmHeight: 1750 mmWeight: 420 kg
Saw frame: Pivot frame
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3010x27x0,9 mmBand speed: 35/70 (PLC) m/minBand speed continous: 20-100 (CNC/Touch) m/minCutting capacity 0° round: 260 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 330x120 mmCutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mmCutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mmMin. rest piece length: 220 mmWorking height: 835 mmCoolant pump motor: 0.12 kWHydraulic motor: 0.37 kWLength: 2800 mmWidth: 2050 mmHeight: 1900 mmWeight: 1090 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Coolant pump motor: 0.12 kW
Hydraulic motor: 0.37 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3010x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 260 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 330x120 mmCutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mmCutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1200 mmHeight: 1800 mmWeight: 390 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1200 mm
Height: 1800 mm
Weight: 390 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1200 mm
Height: 1800 mm
Weight: 390 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3010x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 260 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 330x120 mmCutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mmCutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mmWorking height: 830 mmLength: 1500 mmWidth: 1400 mmHeight: 1850 mmWeight: 345 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1500 mm
Width: 1400 mm
Height: 1850 mm
Weight: 345 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1500 mm
Width: 1400 mm
Height: 1850 mm
Weight: 345 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 2450x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 220 mmCutting capacity 0° square: 220 mmCutting capacity 0° rectangular: 260x140 mmCutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mmCutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mmWorking height: 965 mmLength: 1200 mmWidth: 1100 mmHeight: 1860 mmWeight: 240 kg
Saw frame: Pivot frame
Band dimensions: 2450x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° rectangular: 260x140 mm
Cutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mm
Cutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 2450x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° rectangular: 260x140 mm
Cutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mm
Cutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsPonceusesRectifieuses planes
Schleiflänge: 2500 mmSchleifbreite: 600 mmWerkstückhöhe: 800 mmTischabmessung: 2500x600 mmVertikalweg: 800 mmAusladung: 650 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Schleiflänge: 2500 mm
Schleifbreite: 600 mm
Werkstückhöhe: 800 mm
Tischabmessung: 2500x600 mm
Vertikalweg: 800 mm
Ausladung: 650 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Schleifbreite: 600 mm
Werkstückhöhe: 800 mm
Tischabmessung: 2500x600 mm
Vertikalweg: 800 mm
Ausladung: 650 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines à travailler la tôleCisaille pour tôle
Blechbreite: 4050 mmBlechstärke: 20 mmStänderweite: 4100 mmStänderdurchgang: 4200 mmHubzahl: 10-20 Hub/minArbeitsdruck: 250 barGesamtleistungsbedarf: 85 kWMaschinengewicht ca.: 43,6 tRaumbedarf ca.: 5,5x2,8x2,9 m
Blechbreite: 4050 mm
Blechstärke: 20 mm
Ständerweite: 4100 mm
Ständerdurchgang: 4200 mm
Hubzahl: 10-20 Hub/min
Arbeitsdruck: 250 bar
Gesamtleistungsbedarf: 85 kW
Maschinengewicht ca.: 43,6 t
Raumbedarf ca.: 5,5x2,8x2,9 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Blechstärke: 20 mm
Ständerweite: 4100 mm
Ständerdurchgang: 4200 mm
Hubzahl: 10-20 Hub/min
Arbeitsdruck: 250 bar
Gesamtleistungsbedarf: 85 kW
Maschinengewicht ca.: 43,6 t
Raumbedarf ca.: 5,5x2,8x2,9 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Travail des métaux et machines-outilsFraiseusesFraiseuses raboteuses - double colonne
x-Weg: 13000 mmy-Weg: 2750 mmz-Weg: 3000 mmDrehzahl: 600 U/minSpindelaufnahme ISO: 50Fräskopf: 4Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 13000 mm
y-Weg: 2750 mm
z-Weg: 3000 mm
Drehzahl: 600 U/min
Spindelaufnahme ISO: 50
Fräskopf: 4
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
y-Weg: 2750 mm
z-Weg: 3000 mm
Drehzahl: 600 U/min
Spindelaufnahme ISO: 50
Fräskopf: 4
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsPerceuses et aléseusesAléseuses de trous profonds
Kernbohrdurchmesser - max.: 200 mmBohrtiefe: 3500 mmUmlaufdurchmesser: 700 mmDrehzahl: 475 U/minLünette: 275 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: 200 mm
Bohrtiefe: 3500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 275 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bohrtiefe: 3500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 275 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsPerceuses et aléseusesAléseuses de trous profonds
Kernbohrdurchmesser - max.: 200 mmBohrtiefe: 2500 mmUmlaufdurchmesser: 700 mmDrehzahl: 475 U/minLünette: 370 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: 200 mm
Bohrtiefe: 2500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 370 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bohrtiefe: 2500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 370 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 2035 mmSheet thickness (420 N/mm²): 6.5 mmAntrieb: HydraulicMax. bending angle: 135 °Length: 3300 mmWidth: 1550 mmHeight: 1900 mmWeight: 3710 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 6.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3710 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Sheet thickness (420 N/mm²): 6.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3710 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsPressesPresses d'essai
pressing capacity: 100 toCylinder fix or moveable: fixStroke: 300 mmDaylight: 680 mmDistance between columns: 1020 mmRapid speed: 8 mm/sWorking speed: 5 mm/sRetraction speed: 10 mm/sTable: 500x1020 mmHole in table: 100 mmHole distance: 190 mmLength: 2110 mmWidth: 1000 mmHeight: 2350 mmWeight: 1985 kg
pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1020 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2350 mm
Weight: 1985 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1020 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2350 mm
Weight: 1985 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsPressesPresses d'essai
pressing capacity: 150 toCylinder fix or moveable: horizontal moveableStroke: 300 mmDistance between columns: 1570 mmPiston diameter: 280x200 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 2630 mmWidth: 1000 mmHeight: 2480 mmWeight: 2100 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Machines alimentairesÉquipements de boulangerie et de pâtisserieMachines de découpe
Grote AC60M LH sandwich cutter, Serial: 1204501, 2020, Stainless sandwich cutter, belt dimensions 2600mm x 160mm, variable speed main belt and top hold down belt, cuts any sandwich in half accurately and cleanly using a mechanical blade, up to 60 sandwich per minute, mobile, 3Ph
Grote AC60M LH sandwich cutter, Serial: 1204501, 2020, Stainless sandwich cutter, belt dimensions 2600mm x 160mm, variable speed main belt and top hold down belt, cuts any sandwich in half accurately and cleanly using a mechanical blade, up to 60 sandwich per minute, mobile, 3Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Machines alimentairesÉquipements de boulangerie et de pâtisserieMachines de découpe
Eillert G1500 belt slicer, stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph
Eillert G1500 belt slicer, stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.