Please wait...

5
Metal working and machine toolsSawingBelt saws

Fully automatic band saw HESSE by BEKA-MAK BMSO 320 E

HESSE by BEKA-MAK BMSO 320 E
Saw frame: Pivot frame Band dimensions: 3660x27x0,9 mm Band speed continous: 20-100 m/min Cutting capacity 0° round: 320 mm Cutting capacity 0° square: 300 mm Cutting capacity 0° flat: 320x300 mm Working height: 640 mm Hydraulic motor: 0.37 kW Motor: 2 kW Coolant pump motor: 0.12 kW Length: 1900 mm Width: 850 mm Height: 1300 mm Weight: 770 kg
Saw frame: Pivot frame
Band dimensions: 3660x27x0,9 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 320x300 mm
Working height: 640 mm
Hydraulic motor: 0.37 kW
Motor: 2 kW
Coolant pump motor: 0.12 kW
Length: 1900 mm
Width: 850 mm
Height: 1300 mm
Weight: 770 kg
3
Metal working and machine toolsSheet metal working machinesFeed straighteners

Decoiler Baier BA 25

Baier BA 25
Min. coil inner diameter: 400 mm Max. Coil inner diameter: 700 Max. coil width: 1500 mm Length: 2050 mm Width: 820 mm Height: 1000 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 700
Max. coil width: 1500 mm
Length: 2050 mm
Width: 820 mm
Height: 1000 mm
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by DURMA HRB-4

HESSE by DURMA HRB-4 25270
Bending length: 2550 mm Max. bending capacity - mild steel: 15 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm Upper roll diameter: 270 mm Lower roll diameter: 270 mm Lateral roll diameter: 230 mm Max. opening: 50 mm Working height: 1155 mm Motor power: 15 kW Length: 4760 mm Width: 1660 mm Height: 1155 mm Weight: 8950 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 15
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 4760 mm
Width: 1660 mm
Height: 1155 mm
Weight: 8950 kg
12
Plastic processing machinesInjection molding machines

Used ENGEL ES 750H/80W/(500V)/300HL-2F

ENGEL ES 750H/80W/(500V)/300HL-2F
Ref. no.: 17146 Hersteller: ENGEL Year of construction: 2004 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Injection unit Screw diameter: 50 + 25 mm Injection volume: 393 + 49 cm³ Shot weight: 354 + 44 g Injection pressure: 1917 + 1586 bar Measurements and weight Dimensions: 6,5 x 2,3 x m Machine weight: 21000 kg
Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm

Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar

Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
13
Food machinesCooling technology

Linde Cryoline MT1250 Freezing tunnel

Linde Cryoline MT1250 Freezing tunnel, Serial: 5-199, 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, o
Linde Cryoline MT1250 Freezing tunnel, Serial: 5-199, 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, o
14
Metal working and machine toolsSheet metal working machines

Hydraulic single column press SICMI PCL 40 A

SICMI PCL 40 A
pressing capacity: 40 to Stroke: 500 mm Ram: 700x350 mm Table: 700x500 mm Daylight: 500 mm Throat depth: 250 mm Rapid speed: 26 mm/s Working speed: 9 mm/s Motor: 4 kW Length: 1500 mm Width: 1000 mm Height: 2500 mm Weight: 1500 kg
pressing capacity: 40 to
Stroke: 500 mm
Ram: 700x350 mm
Table: 700x500 mm
Daylight: 500 mm
Throat depth: 250 mm
Rapid speed: 26 mm/s
Working speed: 9 mm/s
Motor: 4 kW
Length: 1500 mm
Width: 1000 mm
Height: 2500 mm
Weight: 1500 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by DURMA HRB-4

HESSE by DURMA HRB-4 30360
Bending length: 3100 mm Max. bending capacity - mild steel: 25 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm Upper roll diameter: 360 mm Lower roll diameter: 360 mm Lateral roll diameter: 270 mm Max. opening: 60 mm Working height: 1510 mm Motor power: 22 kW Length: 5560 mm Width: 2060 mm Height: 2050 mm Weight: 16750 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 360 mm
Lower roll diameter: 360 mm
Lateral roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1510 mm
Motor power: 22 kW
Length: 5560 mm
Width: 2060 mm
Height: 2050 mm
Weight: 16750 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by DURMA HRB-4

HESSE by DURMA HRB-4 30300
Bending length: 3100 mm Max. bending capacity - mild steel: 16 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm Upper roll diameter: 300 mm Lower roll diameter: 300 mm Lateral roll diameter: 240 mm Max. opening: 50 mm Working height: 1140 mm Motor power: 18.5 kW Length: 5310 mm Width: 1660 mm Height: 1140 mm Weight: 11100 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 300 mm
Lower roll diameter: 300 mm
Lateral roll diameter: 240 mm
Max. opening: 50 mm
Working height: 1140 mm
Motor power: 18.5 kW
Length: 5310 mm
Width: 1660 mm
Height: 1140 mm
Weight: 11100 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by DURMA HRB-4

HESSE by DURMA HRB-4 30270
Bending length: 3100 mm Max. bending capacity - mild steel: 13 Max. plate thickness without prebending - mild steel: 12 mm Max. plate thickness with prebending - mild steel: 8 mm Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm Upper roll diameter: 270 mm Lower roll diameter: 270 mm Lateral roll diameter: 230 mm Max. opening: 50 mm Working height: 1155 mm Motor power: 15 kW Length: 5310 mm Width: 1660 mm Height: 1590 mm Weight: 10050 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending - mild steel: 12 mm
Max. plate thickness with prebending - mild steel: 8 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 5310 mm
Width: 1660 mm
Height: 1590 mm
Weight: 10050 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by DURMA HRB-4

HESSE by DURMA HRB-4 30240
Bending length: 3100 mm Max. bending capacity - mild steel: 8 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm Upper roll diameter: 240 mm Lower roll diameter: 240 mm Lateral roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4880 mm Width: 1160 mm Height: 1200 mm Weight: 6450 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 240 mm
Lower roll diameter: 240 mm
Lateral roll diameter: 190 mm
Working height: 825 mm
Motor power: 11 kW
Length: 4880 mm
Width: 1160 mm
Height: 1200 mm
Weight: 6450 kg
3
Metal working and machine toolsSheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by DURMA MRB-S

HESSE by DURMA MRB-S 2006
Bending length: 2030 mm Max. bending capacity - mild steel: 6 Max. plate thickness without prebending - mild steel: 6 mm Max. plate thickness with prebending - mild steel: 5 mm Upper roll diameter: 170 mm Motor power: 4 kW Length: 3600 mm Width: 1020 mm Height: 1120 mm Weight: 2400 kg
Bending length: 2030 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 5 mm
Upper roll diameter: 170 mm
Motor power: 4 kW
Length: 3600 mm
Width: 1020 mm
Height: 1120 mm
Weight: 2400 kg
6
Metal working and machine toolsSheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by DURMA MRB-S

HESSE by DURMA MRB-S 1506
Bending length: 1530 mm Max. bending capacity - mild steel: 6 Max. plate thickness without prebending - mild steel: 6 mm Max. plate thickness with prebending - mild steel: 4 mm Upper roll diameter: 150 mm Motor power: 4 kW Length: 3100 mm Width: 1120 mm Height: 1020 mm Weight: 2100 kg
Bending length: 1530 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 4 mm
Upper roll diameter: 150 mm
Motor power: 4 kW
Length: 3100 mm
Width: 1120 mm
Height: 1020 mm
Weight: 2100 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HSS 20-350
Bending length: 2050 mm Max. bending capacity - mild steel: 30 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Lateral roll diameter: 260 mm Bending speed: 1,5-5 m/min Motor power: 22 kW Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11000 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HSS 30-350
Bending length: 3100 mm Max. bending capacity - mild steel: 20 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Lateral roll diameter: 260 mm Bending speed: 1,5-5 m/min Motor power: 22 kW Length: 6000 mm Width: 2200 mm Height: 1900 mm Weight: 15000 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 6000 mm
Width: 2200 mm
Height: 1900 mm
Weight: 15000 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 20-260
Bending length: 2050 mm Max. bending capacity - mild steel: 16 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm Upper roll diameter: 260 mm Lower roll diameter: 260 mm Lateral roll diameter: 200 mm Bending speed: 1,5-6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 20-245
Bending length: 2050 mm Max. bending capacity - mild steel: 13 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Lateral roll diameter: 180 mm Bending speed: 1,5-6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1470 mm
Weight: 5450 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 30-260
Bending length: 3100 mm Max. bending capacity - mild steel: 10 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm Upper roll diameter: 260 mm Lower roll diameter: 260 mm Lateral roll diameter: 200 mm Bending speed: 1,5-6 m/min Motor power: 7.5 kW Length: 5350 mm Width: 1600 mm Height: 1550 mm Weight: 7685 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 25-245
Bending length: 2550 mm Max. bending capacity - mild steel: 10 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Lateral roll diameter: 180 mm Bending speed: 1,5-6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 30-245
Bending length: 3100 mm Max. bending capacity - mild steel: 9 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Lateral roll diameter: 180 mm Bending speed: 1,5-6 m/min Motor power: 7.5 kW Length: 5350 mm Width: 1600 mm Height: 1470 mm Weight: 6850 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6850 kg
6
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 15-150
Bending length: 1550 mm Max. bending capacity - mild steel: 7 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm Upper roll diameter: 150 mm Lower roll diameter: 150 mm Lateral roll diameter: 130 mm Bending speed: 1,5-6 m/min Motor power: 4 kW Length: 3750 mm Width: 960 mm Height: 1100 mm Weight: 2500 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
5
Metal working and machine toolsSheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 20-150
Bending length: 2050 mm Max. bending capacity - mild steel: 6 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm Upper roll diameter: 150 mm Lower roll diameter: 150 mm Lateral roll diameter: 130 mm Bending speed: 1,5-6 m/min Motor power: 4 kW Length: 4250 mm Width: 960 mm Height: 1100 mm Weight: 2800 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
1
Metal working and machine toolsSheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN RS 10

HESSE by ISITAN RS 1050 x 90
Bending length: 1050 mm Max. bending capacity - mild steel: 3 Max. plate thickness with prebending - mild steel: 2 mm Upper roll diameter: 90 mm Length: 2080 mm Width: 700 mm Height: 1250 mm Weight: 410 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Max. plate thickness with prebending - mild steel: 2 mm
Upper roll diameter: 90 mm
Length: 2080 mm
Width: 700 mm
Height: 1250 mm
Weight: 410 kg
1
Metal working and machine toolsSheet metal working machinesRound rolling machines

Manual 3-roll plate bending machine HESSE by ISITAN R 1270 x

HESSE by ISITAN R 1270 x 68
Bending length: 1270 mm Max. bending capacity - mild steel: 1.2 Upper roll diameter: 68 mm Motor power: 1.5 kW Length: 1610 mm Width: 700 mm Height: 1160 mm Weight: 385 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 1.2
Upper roll diameter: 68 mm
Motor power: 1.5 kW
Length: 1610 mm
Width: 700 mm
Height: 1160 mm
Weight: 385 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1270 x 140
Bending length: 1270 mm Max. bending capacity - mild steel: 5 Upper roll diameter: 140 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 2470 mm Width: 750 mm Height: 1000 mm Weight: 1350 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1350 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1550 x 140
Bending length: 1550 mm Max. bending capacity - mild steel: 4 Upper roll diameter: 140 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 2700 mm Width: 750 mm Height: 1000 mm Weight: 1420 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1270 x 120
Bending length: 1270 mm Max. bending capacity - mild steel: 4 Upper roll diameter: 120 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 2470 mm Width: 750 mm Height: 1000 mm Weight: 1110 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
2
Metal working and machine toolsSheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1050 x 110
Bending length: 1050 mm Max. bending capacity - mild steel: 4 Upper roll diameter: 110 mm Motor power: 2.2 kW Length: 1100 mm Width: 750 mm Height: 1000 mm Weight: 990 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
1
Metal working and machine toolsSheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 2

HESSE by ISITAN IRM 2050 x 130
Bending length: 2050 mm Max. bending capacity - mild steel: 3 Upper roll diameter: 130 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 3200 mm Width: 750 mm Height: 1000 mm Weight: 1500 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
3
Metal working and machine toolsSheet metal working machinesPress brakes

Workshop press with bending device HESSE by LFSS AP 1020/150

HESSE by LFSS AP 1020/150
pressing capacity: 150 to Bending length: 1000 mm Stroke: 300 mm Motor power: 11 kW Die: 1 Distance between table and toolholder: 610 mm Distance between columns: 1020 mm Working speed: 5 mm/s Rapid speed: 10 mm/s Max. bending capacity (mild steel): 8 mm Hole in table: 100 mm Hole distance: 190 mm Length: 2110 mm Width: 1000 mm Height: 2450 mm Weight: 2400 kg
pressing capacity: 150 to
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
1
Metal working and machine toolsSheet metal working machinesNotching machines

Ausklinkmaschine mit fixem Winkel TOOLPOWER MFN 1030

TOOLPOWER MFN 1030
Blade length: 100 mm Sheet thickness (420 N/mm²): 3 mm Angle: 90 ° Weight: 90 kg
Blade length: 100 mm
Sheet thickness (420 N/mm²): 3 mm
Angle: 90 °
Weight: 90 kg
2
Metal working and machine toolsSawingBelt saws

Fully automatic band saw BIANCO 420 A PLC

BIANCO 420 A PLC
Saw frame: Pivot frame Band dimensions: 3270x27x0,9 mm Band speed: 35/70 (PLC) m/min Band speed continous: 20-100 (CNC/Touch) m/min Cutting capacity 0° round: 300 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 420x200 mm Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm Min. rest piece length: 220 mm Working height: 835 mm Hydraulic motor: 0.37 kW Coolant pump motor: 0.12 kW Length: 3220 mm Width: 2050 mm Height: 1900 mm Weight: 1090 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 240 mm, quadrat 230 mm, rechteck 270 x 140 mm
Cutting capacity 60°: rund 170 mm, quadrat 170 mm, rechteck 170 x 170 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 3220 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
6
Metal working and machine toolsSawingBelt saws

Semiautomatic band saw BIANCO 370 SA DV

BIANCO 370 SA DV
Saw frame: Double column Band dimensions: 3270x27x0,9 mm Band speed: 40/80 m/min Cutting capacity 0° round: 300 mm Cutting capacity 0° square: 300 mm Cutting capacity 0° flat: 350x260 mm Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm Working height: 830 mm Motor: 1.5 kW Length: 1500 mm Width: 1600 mm Height: 1900 mm Weight: 590 kg
Saw frame: Double column
Band dimensions: 3270x27x0,9 mm
Band speed: 40/80 m/min
Cutting capacity 0° round: 300 mm
Cutting capacity 0° square: 300 mm
Cutting capacity 0° flat: 350x260 mm
Cutting capacity 45°: rund 210 mm, quadrat 210 mm, rechteck 210 x 260 mm
Cutting capacity 60°: rund 110 mm, quadrat 110 mm, rechteck 110 x 150 mm
Working height: 830 mm
Motor: 1.5 kW
Length: 1500 mm
Width: 1600 mm
Height: 1900 mm
Weight: 590 kg
1
Metal working and machine toolsSawingBelt saws

Semiautomatic band saw BIANCO 420 SA DS MS

BIANCO 420 SA DS MS
Saw frame: Pivot frame Band dimensions: 3270x27x0,9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 280 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 420x200 mm Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm Working height: 830 mm Length: 1600 mm Width: 1600 mm Height: 1800 mm Weight: 488 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1600 mm
Height: 1800 mm
Weight: 488 kg
2
Metal working and machine toolsSawingBelt saws

Conventional band saw BIANCO 420 M DS MS SA

BIANCO 420 M DS MS SA
Saw frame: Pivot frame Band dimensions: 3270x27x0,9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 280 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 420x200 mm Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm Working height: 830 mm Length: 1600 mm Width: 1400 mm Height: 1800 mm Weight: 438 kg
Saw frame: Pivot frame
Band dimensions: 3270x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 420x200 mm
Cutting capacity 45°: rund 260 mm, quadrat 240 mm, rechteck 260 x 200 mm
Cutting capacity 60°: rund 170 mm, quadrat 160 mm, rechteck 160 x 160 mm
Cutting capacity - 45°: rund 200 mm, quadrat 180 mm, rechteck 250 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1400 mm
Height: 1800 mm
Weight: 438 kg
1
Metal working and machine toolsSawingBelt saws

Semiautomatic band saw BIANCO 370 SA DS MS

BIANCO 370 SA DS MS
Saw frame: Pivot frame Band dimensions: 3120x27x0,9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 280 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 350x140 mm Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm Working height: 830 mm Length: 1600 mm Width: 1550 mm Height: 1750 mm Weight: 460 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
2
Metal working and machine toolsSawingBelt saws

Conventional band saw BIANCO 370 M DS MS SA

BIANCO 370 M DS MS SA
Saw frame: Pivot frame Band dimensions: 3120 mm Band speed: 35/70 m/min Cutting capacity 0° round: 280 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 350x140 mm Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm Working height: 830 mm Length: 1550 mm Width: 1400 mm Height: 1750 mm Weight: 420 kg
Saw frame: Pivot frame
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
4
Metal working and machine toolsSawingBelt saws

Fully automatic band saw BIANCO 330 AE PLC

BIANCO 330 AE PLC
Saw frame: Pivot frame Band dimensions: 3010x27x0,9 mm Band speed: 35/70 (PLC) m/min Band speed continous: 20-100 (CNC/Touch) m/min Cutting capacity 0° round: 260 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 330x120 mm Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm Min. rest piece length: 220 mm Working height: 835 mm Hydraulic motor: 0.37 kW Coolant pump motor: 0.12 kW Length: 2800 mm Width: 2050 mm Height: 1900 mm Weight: 1090 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 (PLC) m/min
Band speed continous: 20-100 (CNC/Touch) m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Min. rest piece length: 220 mm
Working height: 835 mm
Hydraulic motor: 0.37 kW
Coolant pump motor: 0.12 kW
Length: 2800 mm
Width: 2050 mm
Height: 1900 mm
Weight: 1090 kg
1
Metal working and machine toolsSawingBelt saws

Semiautomatic band saw BIANCO 330 SAE

BIANCO 330 SAE
Saw frame: Pivot frame Band dimensions: 3010x27x0,9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 260 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 330x120 mm Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm Working height: 830 mm Length: 1600 mm Width: 1200 mm Height: 1800 mm Weight: 390 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1200 mm
Height: 1800 mm
Weight: 390 kg
2
Metal working and machine toolsSawingBelt saws

Conventional band saw BIANCO 330 M SA

BIANCO 330 M SA
Saw frame: Pivot frame Band dimensions: 3010x27x0,9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 260 mm Cutting capacity 0° square: 240 mm Cutting capacity 0° flat: 330x120 mm Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm Working height: 830 mm Length: 1500 mm Width: 1400 mm Height: 1850 mm Weight: 345 kg
Saw frame: Pivot frame
Band dimensions: 3010x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 260 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 330x120 mm
Cutting capacity 45°: rund 200 mm, quadrat 190 mm, rechteck 200 x 130 mm
Cutting capacity 60°: rund 120 mm, quadrat 115 mm, rechteck 120 x 100 mm
Working height: 830 mm
Length: 1500 mm
Width: 1400 mm
Height: 1850 mm
Weight: 345 kg
7
Metal working and machine toolsSawingBelt saws

Conventional band saw BIANCO 280 M SA

BIANCO 280 M SA
Saw frame: Pivot frame Band dimensions: 2450x27x0,9 mm Band speed: 35/70 m/min Cutting capacity 0° round: 220 mm Cutting capacity 0° square: 220 mm Cutting capacity 0° flat: 260x140 mm Cutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mm Cutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mm Working height: 965 mm Length: 1200 mm Width: 1100 mm Height: 1860 mm Weight: 240 kg
Saw frame: Pivot frame
Band dimensions: 2450x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° flat: 260x140 mm
Cutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mm
Cutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
10
Metal working and machine toolsSanding machinesSurface grinding machines

Flachschleifmaschine

FAVRETTO MD 200
Schleiflänge: 2500 mmSchleifbreite: 600 mmWerkstückhöhe: 800 mmTischabmessung: 2500x600 mmVertikalweg: 800 mmAusladung: 650 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Schleiflänge: 2500 mm
Schleifbreite: 600 mm
Werkstückhöhe: 800 mm
Tischabmessung: 2500x600 mm
Vertikalweg: 800 mm
Ausladung: 650 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
10
Metal working and machine toolsSheet metal working machinesPlate shears

Tafelschere - hydraulisch

Weinbrenner TSV204100
Blechbreite: 4050 mmBlechstärke: 20 mmStänderweite: 4100 mmStänderdurchgang: 4200 mmHubzahl: 10-20 Hub/minArbeitsdruck: 250 barGesamtleistungsbedarf: 85 kWMaschinengewicht ca.: 43,6 tRaumbedarf ca.: 5,5x2,8x2,9 m
Blechbreite: 4050 mm
Blechstärke: 20 mm
Ständerweite: 4100 mm
Ständerdurchgang: 4200 mm
Hubzahl: 10-20 Hub/min
Arbeitsdruck: 250 bar
Gesamtleistungsbedarf: 85 kW
Maschinengewicht ca.: 43,6 t
Raumbedarf ca.: 5,5x2,8x2,9 m
12
Metal working and machine toolsMilling machinesPlaner-type milling M/C - double column

Portalfräsmaschine

WALDRICH-SIEGEN PF-S-75/1B-275/300x1240/22
x-Weg: 13000 mmy-Weg: 2750 mmz-Weg: 3000 mmDrehzahl: 600 U/minSpindelaufnahme ISO: 50Fräskopf: 4Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
x-Weg: 13000 mm
y-Weg: 2750 mm
z-Weg: 3000 mm
Drehzahl: 600 U/min
Spindelaufnahme ISO: 50
Fräskopf: 4
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
3
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines

Tieflochbohrmaschine

Boehringer B 5
Kernbohrdurchmesser - max.: 200 mmBohrtiefe: 3500 mmUmlaufdurchmesser: 700 mmDrehzahl: 475 U/minLünette: 275 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: 200 mm
Bohrtiefe: 3500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 275 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
5
Metal working and machine toolsDrilling machines and boring millsDeep hole boring machines

Tieflochbohrmaschine

Boehringer B 5
Kernbohrdurchmesser - max.: 200 mmBohrtiefe: 2500 mmUmlaufdurchmesser: 700 mmDrehzahl: 475 U/minLünette: 370 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Kernbohrdurchmesser - max.: 200 mm
Bohrtiefe: 2500 mm
Umlaufdurchmesser: 700 mm
Drehzahl: 475 U/min
Lünette: 370 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
3
Metal working and machine toolsSheet metal working machinesSwivel bending machines

Hydraulic folding machine FINTEK AMH 2065

FINTEK AMH 2065
Bending length: 2035 mm Sheet thickness (420 N/mm²): 6.5 mm Antrieb: Hydraulic Max. bending angle: 135 ° Length: 3300 mm Width: 1550 mm Height: 1900 mm Weight: 3710 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 6.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3710 kg
7
Metal working and machine toolsPressesWorkshop press

Hydraulic workshop press HESSE by LFSS AT 1020/100

HESSE by LFSS AT 1020/100
pressing capacity: 100 to Cylinder fix or moveable: fix Stroke: 300 mm Daylight: 680 mm Distance between columns: 1020 mm Rapid speed: 8 mm/s Working speed: 5 mm/s Retraction speed: 10 mm/s Table: 500x1020 mm Hole in table: 100 mm Hole distance: 190 mm Length: 2110 mm Width: 1000 mm Height: 2350 mm Weight: 1985 kg
pressing capacity: 100 to
Cylinder fix or moveable: fix
Stroke: 300 mm
Daylight: 680 mm
Distance between columns: 1020 mm
Rapid speed: 8 mm/s
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Table: 500x1020 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2350 mm
Weight: 1985 kg
4
Metal working and machine toolsPressesWorkshop press

Hydraulic workshop press HESSE by LFSS DPM-K 1570-150

HESSE by LFSS DPM-K 1570-150
pressing capacity: 150 to Cylinder fix or moveable: horizontal moveable Stroke: 300 mm Distance between columns: 1570 mm Piston diameter: 280x200 mm Working speed: 5 mm/s Retraction speed: 10 mm/s Length: 2630 mm Width: 1000 mm Height: 2480 mm Weight: 2100 kg
pressing capacity: 150 to
Cylinder fix or moveable: horizontal moveable
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 280x200 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2630 mm
Width: 1000 mm
Height: 2480 mm
Weight: 2100 kg
12
Food machinesBakery-, pastry equipmentCutting machines

Grote AC60M LH Sandwich cutter

Grote AC60M LH sandwich cutter, Serial: 1204501, 2020, Stainless sandwich cutter, belt dimensions 2600mm x 160mm, variable speed main belt and top hold down belt, cuts any sandwich in half accurately and cleanly using a mechanical blade, up to 60 sandwich per minute, mobile, 3Ph
Grote AC60M LH sandwich cutter, Serial: 1204501, 2020, Stainless sandwich cutter, belt dimensions 2600mm x 160mm, variable speed main belt and top hold down belt, cuts any sandwich in half accurately and cleanly using a mechanical blade, up to 60 sandwich per minute, mobile, 3Ph
9
Food machinesBakery-, pastry equipmentCutting machines

Eillert G1500 Eillert G1500 belt slicer

Eillert G1500 belt slicer, stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph
Eillert G1500 belt slicer, stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph
Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.
Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !
Sign up now for free