8
Travail des métaux et machines-outilsSciage
Cutting diameter: 100 mmSaw blade dimensions: 280 mmSpeed range: 10, 20, 40, 80 rpmSectional area 90° flat: 120 x 100 mmSectional area 90° circular: 100 mmLength stop: 500 mmTotal power: 1,5 kWWeight of machine: 700 kgCondition: goodsemi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supplyAccessory: 18 saw blades, roller conveyor 2 m
Cutting diameter: 100 mm
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Saw blade dimensions: 280 mm
Speed range: 10, 20, 40, 80 rpm
Sectional area 90° flat: 120 x 100 mm
Sectional area 90° circular: 100 mm
Length stop: 500 mm
Total power: 1,5 kW
Weight of machine: 700 kg
Condition: good
semi-automatic machine, electrical limit stop, automatic cutting cycle, pneumatic clamps, prepared for pneumatic controlled supply
Accessory: 18 saw blades, roller conveyor 2 m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines d'emballageMachines d'emballage
Vibration monitoring: yesSingle plain balancing: yesDual plane balancing: yesIteration Method: yesTrans-red method: yesWeight of machine: 15 kgCondition: very goodmaintained vibration meter
Vibration monitoring: yes
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Single plain balancing: yes
Dual plane balancing: yes
Iteration Method: yes
Trans-red method: yes
Weight of machine: 15 kg
Condition: very good
maintained vibration meter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsFraiseusesAutres
X: 500 mmY: 360 mmZ: 400 mmSpeed range: 40 - 2000 rpmTaper fixture: SK 40 DIN2079Control: Heidenhain TNC 155Total power: 6 kWWeight of machine: 2000 kgSpace requirement (W x D x H): 2,8 x 2,9 x 1,9 mCondition: good, ready for operationunder power, ready for inspectionAccessory: docmentation
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Machines d'emballageMachines d'emballage
Weight of machine: 7 kgSpace requirement (W x D x H): 0,3 x 0,3 x 0,2 mSeparate control device for the chuck clamping
Weight of machine: 7 kg
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Space requirement (W x D x H): 0,3 x 0,3 x 0,2 m
Separate control device for the chuck clamping
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Travail des métaux et machines-outilsPerceuses et aléseusesTaraudeuses
Table size: 260 x 290 mmTaper fixture: BohrfutterCoolant system: jaTotal power: 0,55 kWWeight of machine: 380 kgSpace requirement (W x D x H): 0,8 x 0,7 x 1,8 mwell-maintained machine ready for immediate useAccessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Table size: 260 x 290 mm
Taper fixture: Bohrfutter
Coolant system: ja
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Taper fixture: Bohrfutter
Coolant system: ja
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Autres machines
Weight of machine: 170 kgDimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm
Weight of machine: 170 kg
Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Dimensions see picture / drawing, height + inclination adjustable, splitted band, height of cleats 15 mm, splitting of cleats 300 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines d'emballageMachines d'emballage
Total power: 1,5 kWWeight of machine: 20,5 kgSpace requirement (W x D x H): 0,765 x 0,305 x 0,155 mHeating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsSciage
Cutting speed: 6 - 30 m/minSaw blade dimensions: 400 (425) x 50 x 5 mmSectional area 45° flat: 180 x 40 mmSectional area 90° flat: 240 x 70 mmSectional area 90° circular: 140 mmSquare-section area 90°: 130 mmMitre cut: continuously 60 -/+ degreeSaw blade feed: 0 - 1.200 mm/minMinimum quantity lubrication system: KKS 401 115326Autom. Flat magazine FMA for bars: 1500 - 7000 mmControl: Kaltenbach MULTI-COMChip conveyor: yesTotal power: 5,5 kWWeight of machine: 4500 kgSpace requirement (W x D x H): 9,45 x 2,59 x 2,1 mHours of operation: 17290 hCondition: very goodfully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocationAccessory: 2 saw blades
Cutting speed: 6 - 30 m/min
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Saw blade dimensions: 400 (425) x 50 x 5 mm
Sectional area 45° flat: 180 x 40 mm
Sectional area 90° flat: 240 x 70 mm
Sectional area 90° circular: 140 mm
Square-section area 90°: 130 mm
Mitre cut: continuously 60 -/+ degree
Saw blade feed: 0 - 1.200 mm/min
Minimum quantity lubrication system: KKS 401 115326
Autom. Flat magazine FMA for bars: 1500 - 7000 mm
Control: Kaltenbach MULTI-COM
Chip conveyor: yes
Total power: 5,5 kW
Weight of machine: 4500 kg
Space requirement (W x D x H): 9,45 x 2,59 x 2,1 m
Hours of operation: 17290 h
Condition: very good
fully automatic universal saw, workpiece stop for bevel cuts to the left and right, tool cabinet, work area lighting, CNC control cutting angle (DRNC),serial interface CC control, autom. Chip conveyor, discharge height 88 mm, rotary table in wear-resistant design, cut-off gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting 2 good parts, autom. Flat magazine FMA for stacks 1500 - 7000 mm with motor-driven roller conveyor T4, 6/12 m / min., 4 drag chains / 1 storage, magazine depth B1 = 1470 mm, storage depth 1000 mm, 18 compartments 136 mm, 2 compartments 212 mm, automatic gate , bar storage for material pre-storage, depth 700 mm, multiple allocation
Accessory: 2 saw blades
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines d'emballageMachines d'emballage
Suction tube: diameter 150 mm2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
Suction tube: diameter 150 mm
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines à boisMachines de fabrication de fenêtresLignes de production complètes
Power: 2.000Generator type: Newage Stamford HC.74HMotor type: Mitsubishi S16-R-PTA2Voltage: 50 Hz - 400 VTank capacity: no fuel tank ltrContainer (W x D x H): 4,8 x 1,7 x 2,5Working hour: 549 hWeight of machine: 13.000 kgCondition: very goodwithout exhaust system, without starter battery
Power: 2.000
Generator type: Newage Stamford HC.74H
Motor type: Mitsubishi S16-R-PTA2
Voltage: 50 Hz - 400 V
Tank capacity: no fuel tank ltr
Container (W x D x H): 4,8 x 1,7 x 2,5
Working hour: 549 h
Weight of machine: 13.000 kg
Condition: very good
without exhaust system, without starter battery
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Generator type: Newage Stamford HC.74H
Motor type: Mitsubishi S16-R-PTA2
Voltage: 50 Hz - 400 V
Tank capacity: no fuel tank ltr
Container (W x D x H): 4,8 x 1,7 x 2,5
Working hour: 549 h
Weight of machine: 13.000 kg
Condition: very good
without exhaust system, without starter battery
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsToursTours CNC
Swing diameter over bed: 490 mmLength between centres: 1000 mmSwing diameter over cross slide: 280 mmSpeed range: 1 - 625 / 1 - 3.000 rpmGearbox stages: ZF - 2Spindle bore: 93 mmDiameter of spindle bearing: Größe 8 - 130 mmTailstock taper: MK5 - Hub 160 mmControl: Siemens ManualturnTotal power: 17 kWWeight of machine: 3.600 kgSpace requirement (W x D x H): 3,0 x 1,8 x 2,0 mWorking hour: 31556 hwithout jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027Accessory: Documentation, suction, no other accessories
Swing diameter over bed: 490 mm
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h
without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027
Accessory: Documentation, suction, no other accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Length between centres: 1000 mm
Swing diameter over cross slide: 280 mm
Speed range: 1 - 625 / 1 - 3.000 rpm
Gearbox stages: ZF - 2
Spindle bore: 93 mm
Diameter of spindle bearing: Größe 8 - 130 mm
Tailstock taper: MK5 - Hub 160 mm
Control: Siemens Manualturn
Total power: 17 kW
Weight of machine: 3.600 kg
Space requirement (W x D x H): 3,0 x 1,8 x 2,0 m
Working hour: 31556 h
without jaw chuck, contour calculation option and contour handwheel, Multifix mount, spindle head according to DIN 55027
Accessory: Documentation, suction, no other accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Machines à boisMachines de fabrication de fenêtresLignes de production complètes
Power: 1.250 / 1.000Generator type: AVK DSG74M 1-4Motor type: ERGESpeed: 1.500 rpmVoltage: 50 Hz - 400 VContainer (W x D x H): 12,2 x 3,0 x 4,5Working hour: 128 hWeight of machine: 11.380 kgCondition: very goodNot operational, cooling water is leaking from the fuel system (defective immersion sleeve).
Power: 1.250 / 1.000
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good
Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Generator type: AVK DSG74M 1-4
Motor type: ERGE
Speed: 1.500 rpm
Voltage: 50 Hz - 400 V
Container (W x D x H): 12,2 x 3,0 x 4,5
Working hour: 128 h
Weight of machine: 11.380 kg
Condition: very good
Not operational, cooling water is leaking from the fuel system (defective immersion sleeve).
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à poinçonner
Working pressure: min 6 - max. 7 barWeight of machine: 170 kgSpace requirement (W x D x H): 0,55 x 0,55 x 1,4 mCondition: very goodfor profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleMachines d'estampage et de pliage
Rivet diameter: 1 - 4 / 2 - 6 mmRiveting force: 3 / 6 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 170 mmMounting table: 320 x 290 mmWeight of machine: 240 kgTotal power: 0,74 kWSpace requirement (W x D x H): 0,45 x 0,7 x 0,7 mCondition: very goodwell-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines d'emballageMachines d'emballage
Total power: 1,4 kWWeight of machine: 210 kgSpace requirement (W x D x H): 1,2 x 1,2 x 2,05 mfor cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 barAccessory: without extraction function
Total power: 1,4 kW
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 210 kg
Space requirement (W x D x H): 1,2 x 1,2 x 2,05 m
for cleaning of scrap electronics TYP 1 by means of compressed air, unhealthy dust can be removed by the suction system, volume flow at least 1000 to 15000 m³/h, can also be used for venting of picture tubes, retract height 850 mm, ball roller 920 x 1050 mm, diameter fresh air/extraction each 125 mm, diameter Ergo-grip 220 mm, incl. documentation, air connection 8 bar
Accessory: without extraction function
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines d'estampage et de pliage
Rivet diameter: 1 - 4 / 2 - 6 mmRiveting force: 3 / 6 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 170 mmMounting table: 320 x 290 mmWeight of machine: 240 kgTotal power: 0,74 kWSpace requirement (W x D x H): 0,45 x 0,7 x 0,7 mCondition: very goodwell-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines d'estampage et de pliage
Rivet diameter: 1 - 4 / 2 - 6 mmRiveting force: 3 / 6 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 170 mmMounting table: 320 x 290 mmWeight of machine: 240 kgTotal power: 0,74 kWSpace requirement (W x D x H): 0,45 x 0,7 x 0,7 mCondition: very goodwell-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good
well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37
Accessory: documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines et équipements de coupeMachines de découpe laser
X: 1300 mmY: 1300 mmMax. workpiece dimension: 1500 x 1500 x 135 mmRepeatability: 0,025Wavelength: 10,6 micrometerWorking hour: Laser 6135, Gravierer 18.743 hSpace requirement (W x D x H): 2,4 x 2,0 x 1,4 mTotal power: 2,3 kWWeight of machine: 1200 kgCondition: gutType: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: gut
Type: Co² laser, controller RF 3000, laser Synrad evolution 100, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, water cooling: cooling unit Neslab Merlin M100, JobControl software from Trotec 10.7.1
Accessory: cooling unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines à boisMachines de fabrication de fenêtresLignes de production complètes
Power: 2.071 / 1.641Generator type: Stamford PI734F1Motor type: MitsubishiVoltage: 50 Hz - 400 VBattery voltage: 24Tank capacity: 2.000 ltrContainer (W x D x H): 12,3 x 2,45 x 3,2Working hour: 181 hWeight of machine: 23.000 kgCondition: very good
Power: 2.071 / 1.641
Generator type: Stamford PI734F1
Motor type: Mitsubishi
Voltage: 50 Hz - 400 V
Battery voltage: 24
Tank capacity: 2.000 ltr
Container (W x D x H): 12,3 x 2,45 x 3,2
Working hour: 181 h
Weight of machine: 23.000 kg
Condition: very good
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Generator type: Stamford PI734F1
Motor type: Mitsubishi
Voltage: 50 Hz - 400 V
Battery voltage: 24
Tank capacity: 2.000 ltr
Container (W x D x H): 12,3 x 2,45 x 3,2
Working hour: 181 h
Weight of machine: 23.000 kg
Condition: very good
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Machines à boisMachines de fabrication de fenêtresLignes de production complètes
Power: 1130 / 904Motor type: MTU V18 Bi Turbo DieselSpeed: 1500 rpmVoltage: 50 Hz - 230 / 400 VTank capacity: 800 ltrWorking hour: 116 hCondition: very goodDocumentation, heat exchanger, batteries, soundproof hood
Power: 1130 / 904
Motor type: MTU V18 Bi Turbo Diesel
Speed: 1500 rpm
Voltage: 50 Hz - 230 / 400 V
Tank capacity: 800 ltr
Working hour: 116 h
Condition: very good
Documentation, heat exchanger, batteries, soundproof hood
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Motor type: MTU V18 Bi Turbo Diesel
Speed: 1500 rpm
Voltage: 50 Hz - 230 / 400 V
Tank capacity: 800 ltr
Working hour: 116 h
Condition: very good
Documentation, heat exchanger, batteries, soundproof hood
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines d'emballageMachines d'emballage
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à boisMachines de fabrication de fenêtresLignes de production complètes
Power: 3300 / 3000Generator type: C175-16 SCAC, V16Motor type: C175-16 SCAC, V16Speed: 1.500 rpmVoltage: 50 Hz - 400 / 230 VControl: EMCP 4.2BBattery voltage: 24Container (W x D x H): 7,9 x 2,8 x 3,3Working hour: 373 hWeight of machine: 23000 kgCondition: very good
Power: 3300 / 3000
Generator type: C175-16 SCAC, V16
Motor type: C175-16 SCAC, V16
Speed: 1.500 rpm
Voltage: 50 Hz - 400 / 230 V
Control: EMCP 4.2B
Battery voltage: 24
Container (W x D x H): 7,9 x 2,8 x 3,3
Working hour: 373 h
Weight of machine: 23000 kg
Condition: very good
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Generator type: C175-16 SCAC, V16
Motor type: C175-16 SCAC, V16
Speed: 1.500 rpm
Voltage: 50 Hz - 400 / 230 V
Control: EMCP 4.2B
Battery voltage: 24
Container (W x D x H): 7,9 x 2,8 x 3,3
Working hour: 373 h
Weight of machine: 23000 kg
Condition: very good
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsToursTours à tourelle
Turning diameter: 250 mmCentre height: 125 mmTurning length: 800 mmSpeed range: 3.000 rpmTotal power: 9 kWWeight of machine: 650 kgSpace requirement (W x D x H): 1,4 x 0,8 x 1,85 mDocumentation: yesCondition: very goodLever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little usedAccessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
Turning diameter: 250 mm
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good
Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used
Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Centre height: 125 mm
Turning length: 800 mm
Speed range: 3.000 rpm
Total power: 9 kW
Weight of machine: 650 kg
Space requirement (W x D x H): 1,4 x 0,8 x 1,85 m
Documentation: yes
Condition: very good
Lever quick-action collet chuck mounted on the main spindle via an intermediate flange. For deadlength collets type 173E. Otherwise in the standard version according to the original documents available, GDW lever with pushbutton for spindle start-up, GDW material stop mounted on the grooving slide behind the center of rotation, monitoring by Beru switch using actuating plunger. Plunger diameter 5.0 mm, 3-color ready light with functions: "locked" - "standby" - "operation", GDW set-up key holder for safely bridging the stop function, very well-kept machine from a workshop for the disabled, little used
Accessory: SZM collets: 2 pieces 30 mm, 1 piece 28 mm, 1 piece 25 mm, 2 pieces 24 mm, 2 pieces 20 mm, 1 piece 18 mm, 2 pieces 16 mm, 4 pieces 12 mm , 3 pcs 10 mm, 2 pcs 9 mm, 1 pc 8 mm, 1 pc 6 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Autres machines
Load capacity: 27 kgWeight of machine: 100 kgSpace requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 mCondition: very goodGripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 mAccessory: no further accessories
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Machines d'emballageMachines d'emballage
Product witdh: 45 - 400 mmProduct hight: 1 - 200 mmProduct length: 50 - unlimited mmPower: max. 60 stroke/minTransport speed: 8 - 30 m/minFilm thickness: 10 - 80 µmTemperature range: 170 ° CTotal power: 25 kWWeight of machine: 2.100 kgSpace requirement (W x D x H): 11,5 x 2,4 x 2,0 mSystem structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
Product witdh: 45 - 400 mm
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m
System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines d'estampage et de pliage
Rivet diameter: 2 - 6 / 2 - 7 mmRiveting force: 6,5 / 8,2 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 159 mmMounting table: 240 x 247 mmWeight of machine: 180 kgTotal power: 0,37 kWSpace requirement (W x D x H): 0,4 x 0,6 x 0,8 mCondition: very goodvery nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines d'estampage et de pliage
Rivet diameter: 2 - 6 / 2 - 7 mmRiveting force: 6,5 / 8,2 kNSpindle stroke: 5 - 30 mmWorking pressure: 1 - 6 barTroath: 159 mmMounting table: 240 x 247 mmWeight of machine: 180 kgTotal power: 0,37 kWSpace requirement (W x D x H): 0,4 x 0,6 x 0,8 mCondition: very goodvery nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good
very nice, well-kept machine, hardly any operating hours, with piece counter
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Module solaire Maysun Solar, MSE-07 370 Wc - noir intégral, module mono PU, 1755 mm x 1038 mm x 30 mm, longueur du câble de raccordement 110 cm, collecte uniquement
Module solaire Maysun Solar, MSE-07 370 Wc - noir intégral, module mono PU, 1755 mm x 1038 mm x 30 mm, longueur du câble de raccordement 110 cm, collecte uniquement
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Machines à boisMachines de fabrication de fenêtresLignes de production complètes
Power: 2000 / 1600Generator type: Leroy Somer LSA 52.3 S5Motor type: Perkins 4012-46TAG3ASpeed: 1.500 rpmVoltage: 50 Hz - 230 7 400 VControl: DSE 8610Battery voltage: 24Tank capacity: 2000 ltrContainer (W x D x H): 5,0 x 2,2 x 2,55Working hour: 0 hWeight of machine: 11,160 kgCondition: newWith continuous operation, the performance is reduced by 10%
Power: 2000 / 1600
Generator type: Leroy Somer LSA 52.3 S5
Motor type: Perkins 4012-46TAG3A
Speed: 1.500 rpm
Voltage: 50 Hz - 230 7 400 V
Control: DSE 8610
Battery voltage: 24
Tank capacity: 2000 ltr
Container (W x D x H): 5,0 x 2,2 x 2,55
Working hour: 0 h
Weight of machine: 11,160 kg
Condition: new
With continuous operation, the performance is reduced by 10%
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Generator type: Leroy Somer LSA 52.3 S5
Motor type: Perkins 4012-46TAG3A
Speed: 1.500 rpm
Voltage: 50 Hz - 230 7 400 V
Control: DSE 8610
Battery voltage: 24
Tank capacity: 2000 ltr
Container (W x D x H): 5,0 x 2,2 x 2,55
Working hour: 0 h
Weight of machine: 11,160 kg
Condition: new
With continuous operation, the performance is reduced by 10%
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Travail des métaux et machines-outilsFraiseusesAutres
X: 560 mmY: 500 mmZ: 390 mmRapid: 4 m/minTable load: 800 kgSpeed range: 4000 rpmTaper fixture: SK 40Speed range head stock: 4000 rmpSpindle drive: 4 kWControl: Dialog 11Electrical hand wheel: yesCoolant system: yesDirect path measuring system: yesDocumentation: yesTotal power: 19 kWWeight of machine: 2900 kgSpace requirement (W x D x H): 3,66 x 3,5 x 2,1 mCondition: very goodless operating hours, can be inspected under powerAccessory: complete documentation
X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good
less operating hours, can be inspected under power
Accessory: complete documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Travail des métaux et machines-outilsMachines d'érosion
X: 500 mmY: 295 mmZ: 385 mmC axis: 360 °Mounting table: 780 x 500 mmDistance table to quill: 285 - 660 mmWorkpiece weight: 1200 kgMax. Travel speed X,Y,Z: 600 mm/minClamping system: EROWAC-axis measurement resolution: 0,001 °Electrode changer: 16 -stationElektrode changer: Pick-UpElectrode weight: C-axis 20 kgMax. single electrode weight: 5 kgElectrode changer total load: 40 kgDielectric cooler: yesDielectric filter candles: 3 pcs.Dielectric filling level: 345 mmDielectric fill quantity: 450 l ltrDielectric aggregate: separatelyGenerator: 30 AControl: EROCOM 200Fire-extinguishing systems: yesTotal power: 8 kWWeight of machine: 4400 kgSpace requirement (W x D x H): 2,2 x 3,3 x 2,4 mCondition: very goodchecked by Maho technicians, ready for demonstration under power, instruction / training optionally possibleAccessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
X: 500 mm
Y: 295 mm
Z: 385 mm
C axis: 360 °
Mounting table: 780 x 500 mm
Distance table to quill: 285 - 660 mm
Workpiece weight: 1200 kg
Max. Travel speed X,Y,Z: 600 mm/min
Clamping system: EROWA
C-axis measurement resolution: 0,001 °
Electrode changer: 16 -station
Elektrode changer: Pick-Up
Electrode weight: C-axis 20 kg
Max. single electrode weight: 5 kg
Electrode changer total load: 40 kg
Dielectric cooler: yes
Dielectric filter candles: 3 pcs.
Dielectric filling level: 345 mm
Dielectric fill quantity: 450 l ltr
Dielectric aggregate: separately
Generator: 30 A
Control: EROCOM 200
Fire-extinguishing systems: yes
Total power: 8 kW
Weight of machine: 4400 kg
Space requirement (W x D x H): 2,2 x 3,3 x 2,4 m
Condition: very good
checked by Maho technicians, ready for demonstration under power, instruction / training optionally possible
Accessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 295 mm
Z: 385 mm
C axis: 360 °
Mounting table: 780 x 500 mm
Distance table to quill: 285 - 660 mm
Workpiece weight: 1200 kg
Max. Travel speed X,Y,Z: 600 mm/min
Clamping system: EROWA
C-axis measurement resolution: 0,001 °
Electrode changer: 16 -station
Elektrode changer: Pick-Up
Electrode weight: C-axis 20 kg
Max. single electrode weight: 5 kg
Electrode changer total load: 40 kg
Dielectric cooler: yes
Dielectric filter candles: 3 pcs.
Dielectric filling level: 345 mm
Dielectric fill quantity: 450 l ltr
Dielectric aggregate: separately
Generator: 30 A
Control: EROCOM 200
Fire-extinguishing systems: yes
Total power: 8 kW
Weight of machine: 4400 kg
Space requirement (W x D x H): 2,2 x 3,3 x 2,4 m
Condition: very good
checked by Maho technicians, ready for demonstration under power, instruction / training optionally possible
Accessory: Documentation, no holder available, optional 60 A for an additional charge of EUR 1,500
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Travail des métaux et machines-outilsFraiseusesAutres
X: 1050 mmY: 920 mmZ: 110 mmTable size: 1000 x 1000 mmSpeed range: 18.000 rpmTaper fixture: SK 25Tool changer: 6 -stationMax. workpiece dimension: Ø 65 mm, hight 65 mmControl: Bosch CC 120Total power: 12 kWWeight of machine: 900 kgSpace requirement (W x D x H): 1,7 x 1,9 x 2,0 mMilling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shiftAccessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m
Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift
Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsMachines à souderAutres
Max. welding current: 200 AMax. welding voltage: 27 VTotal power: 10,6 kWWeight of machine: 88 kgSpace requirement (W x D x H): 0,376 x 0,684 x 0,381 mwith wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m
with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsPerceuses et aléseuses
Mounting table: 300 x 400 mmQuill ram: 120 mmSpeed range: 5800 rpmGearbox stages: 2Feed: 0,001 - 3,5 m/minRapid: 3,5 m/minTaper fixture: MK 3Thread cutting device: with foot switchCoolant system: yesTotal power: 1,5 kWWeight of machine: 380 kgSpace requirement (W x D x H): 0,66 x 0,44 x 1,95 mCondition: very goodHigh-performance drilling machine, machine number 511Accessory: documentation, coolant equipment
Mounting table: 300 x 400 mm
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good
High-performance drilling machine, machine number 511
Accessory: documentation, coolant equipment
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseusesAutres
X: 650 mmY: 510 mmZ: 510 mmMounting table: 800 x 450 mmT-tongues: size/quantity/distanceTable load: max. 400 kgWorking height: 760 mmSpindle diameter: 65 mmSpeed range: 8000 rpmSpindle power: 7/9,25 kWTool holder: SK 40Tool changer: 16 -stationTool diameter: 80 mmMax. length tool: 250 mmMax. weight tool: 6 kgRapid: 16000 m/minControl: Siemens 802DWeight of machine: 3500 kgSpace requirement (W x D x H): 2,15 x 2,1 x 2,45 mCondition: working conditionWorking hour: 9325 hAccessory: Documentation, no futher accessories
X: 650 mm
Y: 510 mm
Z: 510 mm
Mounting table: 800 x 450 mm
T-tongues: size/quantity/distance
Table load: max. 400 kg
Working height: 760 mm
Spindle diameter: 65 mm
Speed range: 8000 rpm
Spindle power: 7/9,25 kW
Tool holder: SK 40
Tool changer: 16 -station
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Rapid: 16000 m/min
Control: Siemens 802D
Weight of machine: 3500 kg
Space requirement (W x D x H): 2,15 x 2,1 x 2,45 m
Condition: working condition
Working hour: 9325 h
Accessory: Documentation, no futher accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 510 mm
Z: 510 mm
Mounting table: 800 x 450 mm
T-tongues: size/quantity/distance
Table load: max. 400 kg
Working height: 760 mm
Spindle diameter: 65 mm
Speed range: 8000 rpm
Spindle power: 7/9,25 kW
Tool holder: SK 40
Tool changer: 16 -station
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Rapid: 16000 m/min
Control: Siemens 802D
Weight of machine: 3500 kg
Space requirement (W x D x H): 2,15 x 2,1 x 2,45 m
Condition: working condition
Working hour: 9325 h
Accessory: Documentation, no futher accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Travail des métaux et machines-outilsMachines à souderRobots
Load capacity: 16 kgRange working radius: 1550 mmControl Modul: IRC5 M2004Robot version: IRB 2400/16 Type B - M2004Teach Panel: FlexPendantRemote I/O Unit: DSQC 350ANumber of axes: 6Total power: 1 kWWeight of machine: 800 kgSpace requirement (W x D x H): 0,73 x 0,6 x 1,6 mCondition: very goodWorking hour: 37095 hwell-kept robot, usable immediatelyAccessory: Documentation, all cables
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseuses
X: 4050 mmY: 2050 mmZ: 250 mmMounting table: 4200 x 2150 mmSpeed range: 12 kW - 36.000 rpmTaper fixture: HSK E40Control: MDSI 6.0 on XP computerTool changer: 10 -stationTool diameter: 13 mmHours of operation: 23589 hSpindle on: 7736 hTotal power: 15 kWWeight of machine: 4900 kgSpace requirement (W x D x H): 6,7 x 3,12 x 2,6 mCondition: goodtool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service techniciansAccessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good
tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians
Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsFraiseusesAutres
X: 1050 mmY: 600 mmZ: 600 mmTable size: 1150 x 600 mmSpeed range: 8.000 rpmTaper fixture: BT 40Internal coolant: 20 barTool changer: 24 -stationControl: Fanuc 0i-MDHours of operation: 31575 hProgram run: 8510 hTotal power: 40 kWWeight of machine: 7.200 kgSpace requirement (W x D x H): 4,0 x 2,2 x 2,7 mCondition: very goodfiltration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured visesAccessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good
filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises
Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Machines à boisSciageScies à courroies
Cutting diameter: 400 mmSection thickness: 500 mmSectional area 90° circular: 400 mmSectional area 90° flat: 500 X 400 mmCutting speed: stepless from 15 to 150 m/minWorking height: 750 mmSaw blade dimensions: 6220 X 41 X 1,3 mmRemaining piece length: automat 110 mmSmallest diameter: 5 mmChip conveyor: yesFeed length: 0 - 600 mmLowering speed: 0 - 750 mm/sec.Material weight: 500 kgWorking hour: 4500 hTotal power: 8,0 kWWeight of machine: 1950 kgSpace requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m mCutting area rectangle: 500 x 410 mmneat machine, without roller conveyorsAccessory: 2 new saw blades, documentation
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 new saw blades, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm
neat machine, without roller conveyors
Accessory: 2 new saw blades, documentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Travail des métaux et machines-outilsTraitement de surface
Puissance ultrasonique : 8,4 kW
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
Puissance ultrasonique : 8,4 kW
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Poids max. des composants : 5000 kg
Volume : 2000 litres
Capacité de chauffage : 51 kW
Dimensions intérieures utiles L/l/h : 1600/ 1000/ 1250 mm
Espace requis (L x P x H): 12 x 3,2 x 2,1 m
Puissance totale : 60 kW
Etat : très bon
le nettoyage des moules pour le moulage par injection plastique, l'extrusion, les élastomères, le moulage sous pression, les boîtes à noyaux, les moules, l'installation bien entretenue, était à peine utilisée
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.