Please wait...

5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 1 - 4 / 2 - 6 mm Riveting force: 3 / 6 kN Spindle stroke: 5 - 30 mm Working pressure: 1 - 6 bar Troath: 170 mm Mounting table: 320 x 290 mm Weight of machine: 240 kg Total power: 0,74 kW Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m Condition: very good well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37 Accessory: documentation
Rivet diameter: 1 - 4 / 2 - 6 mm
Riveting force: 3 / 6 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 170 mm
Mounting table: 320 x 290 mm
Weight of machine: 240 kg
Total power: 0,74 kW
Space requirement (W x D x H): 0,45 x 0,7 x 0,7 m
Condition: very good

well-kept machine in top condition, with piece counter, riveting time adjustable, the specified rivet diameter applies to material ST 37

Accessory: documentation
10
Metal working and machine toolsCutting machines and equipmentLaser cutting machines
X: 1300 mm Y: 1300 mm Max. workpiece dimension: 1500 x 1500 x 135 mm Repeatability: 0,025 Wavelength: 10,6 micrometer Working hour: Laser 6135, Gravierer 18.743 h Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m Total power: 2,3 kW Weight of machine: 1200 kg Condition: good - controller defect Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1 Accessory: cooling unit
X: 1300 mm
Y: 1300 mm
Max. workpiece dimension: 1500 x 1500 x 135 mm
Repeatability: 0,025
Wavelength: 10,6 micrometer
Working hour: Laser 6135, Gravierer 18.743 h
Space requirement (W x D x H): 2,4 x 2,0 x 1,4 m
Total power: 2,3 kW
Weight of machine: 1200 kg
Condition: good - controller defect

Controller RF 3000 defective, must be repaired/replaced, laser Synrad evolution 100, type: Co² laser, laser power: 100W / 230VAC, lenses: 2.5" and 5", vacuum table with aluminum honeycomb support, processing area: approx. 1250 x 1250 mm, Water cooling: Neslab Merlin M100 cooling unit, JobControl software from Trotec 10.7.1

Accessory: cooling unit
4
V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW

V no. A57408/00 centrifugal pump 4 m3/h, 400 V, 5,5 kW
6
Load capacity: 27 kg Weight of machine: 100 kg Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m Condition: very good Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m Accessory: no further accessories
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good

Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m

Accessory: no further accessories
14
Product witdh: 45 - 400 mm Product hight: 1 - 200 mm Product length: 50 - unlimited mm Power: max. 60 stroke/min Transport speed: 8 - 30 m/min Film thickness: 10 - 80 µm Temperature range: 170 ° C Total power: 25 kW Weight of machine: 2.100 kg Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
Product witdh: 45 - 400 mm
Product hight: 1 - 200 mm
Product length: 50 - unlimited mm
Power: max. 60 stroke/min
Transport speed: 8 - 30 m/min
Film thickness: 10 - 80 µm
Temperature range: 170 ° C
Total power: 25 kW
Weight of machine: 2.100 kg
Space requirement (W x D x H): 11,5 x 2,4 x 2,0 m

System structure: Magazine for elongated parts, conveyor belt, foil packaging machine, conveyor belt, shrink tunnel, roller conveyor. The system was used to weld in 2 m aluminum pipes (cycle 8 pieces/min.). Shrink tunnel: The speed of the roller conveyor and the power of the blower can be regulated. Film material: PVC polyolefine shrink film and polyethylene film
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 2 - 6 / 2 - 7 mm Riveting force: 6,5 / 8,2 kN Spindle stroke: 5 - 30 mm Working pressure: 1 - 6 bar Troath: 159 mm Mounting table: 240 x 247 mm Weight of machine: 180 kg Total power: 0,37 kW Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m Condition: very good very nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good

very nice, well-kept machine, hardly any operating hours, with piece counter
5
Metal working and machine toolsSheet metal working machinesStamping and bending machines
Rivet diameter: 2 - 6 / 2 - 7 mm Riveting force: 6,5 / 8,2 kN Spindle stroke: 5 - 30 mm Working pressure: 1 - 6 bar Troath: 159 mm Mounting table: 240 x 247 mm Weight of machine: 180 kg Total power: 0,37 kW Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m Condition: very good very nice, well-kept machine, hardly any operating hours, with piece counter
Rivet diameter: 2 - 6 / 2 - 7 mm
Riveting force: 6,5 / 8,2 kN
Spindle stroke: 5 - 30 mm
Working pressure: 1 - 6 bar
Troath: 159 mm
Mounting table: 240 x 247 mm
Weight of machine: 180 kg
Total power: 0,37 kW
Space requirement (W x D x H): 0,4 x 0,6 x 0,8 m
Condition: very good

very nice, well-kept machine, hardly any operating hours, with piece counter
1
Solar module Maysun Solar, MSE-07 370 Wp - full black, mono PU module, 1755 mm x 1038 mm x 30 mm, length of connection cable 110 cm, collection only

Solar module Maysun Solar, MSE-07 370 Wp - full black, mono PU module, 1755 mm x 1038 mm x 30 mm, length of connection cable 110 cm, collection only
11
X: 560 mm Y: 500 mm Z: 390 mm Rapid: 4 m/min Table load: 800 kg Speed range: 4000 rpm Taper fixture: SK 40 Speed range head stock: 4000 rmp Spindle drive: 4 kW Control: Dialog 11 Electrical hand wheel: yes Coolant system: yes Direct path measuring system: yes Documentation: yes Total power: 19 kW Weight of machine: 2900 kg Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m Condition: very good less operating hours, can be inspected under power Accessory: complete documentation
X: 560 mm
Y: 500 mm
Z: 390 mm
Rapid: 4 m/min
Table load: 800 kg
Speed range: 4000 rpm
Taper fixture: SK 40
Speed range head stock: 4000 rmp
Spindle drive: 4 kW
Control: Dialog 11
Electrical hand wheel: yes
Coolant system: yes
Direct path measuring system: yes
Documentation: yes
Total power: 19 kW
Weight of machine: 2900 kg
Space requirement (W x D x H): 3,66 x 3,5 x 2,1 m
Condition: very good

less operating hours, can be inspected under power

Accessory: complete documentation
11
Metal working and machine toolsMilling machinesOther
X: 1050 mm Y: 920 mm Z: 110 mm Table size: 1000 x 1000 mm Speed range: 18.000 rpm Taper fixture: SK 25 Tool changer: 6 -station Max. workpiece dimension: Ø 65 mm, hight 65 mm Control: Bosch CC 120 Total power: 12 kW Weight of machine: 900 kg Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
X: 1050 mm
Y: 920 mm
Z: 110 mm
Table size: 1000 x 1000 mm
Speed range: 18.000 rpm
Taper fixture: SK 25
Tool changer: 6 -station
Max. workpiece dimension: Ø 65 mm, hight 65 mm
Control: Bosch CC 120
Total power: 12 kW
Weight of machine: 900 kg
Space requirement (W x D x H): 1,7 x 1,9 x 2,0 m

Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift

Accessory: 6 units with collets, 14 collets, vacuum pump, suction with 4 m suction hose, machine feet, documentation, tool presetting device with depth gauge PAV Vario
10
Max. welding current: 200 A Max. welding voltage: 27 V Total power: 10,6 kW Weight of machine: 88 kg Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
Max. welding current: 200 A
Max. welding voltage: 27 V
Total power: 10,6 kW
Weight of machine: 88 kg
Space requirement (W x D x H): 0,376 x 0,684 x 0,381 m

with wire feed unit MIG CMWH-147 (Bj 2000) and control panel OTC Pro-Face, version hand power source
8
Metal working and machine toolsDrilling machines and boring mills
Mounting table: 300 x 400 mm Quill ram: 120 mm Speed range: 5800 rpm Gearbox stages: 2 Feed: 0,001 - 3,5 m/min Rapid: 3,5 m/min Taper fixture: MK 3 Drilling performance: 25 mm Thread cutting device: with foot switch Coolant system: yes Total power: 1,5 kW Weight of machine: 380 kg Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m Condition: very good High-performance drilling machine, machine number 511 Accessory: documentation, coolant equipment
Mounting table: 300 x 400 mm
Quill ram: 120 mm
Speed range: 5800 rpm
Gearbox stages: 2
Feed: 0,001 - 3,5 m/min
Rapid: 3,5 m/min
Taper fixture: MK 3
Drilling performance: 25 mm
Thread cutting device: with foot switch
Coolant system: yes
Total power: 1,5 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,66 x 0,44 x 1,95 m
Condition: very good

High-performance drilling machine, machine number 511

Accessory: documentation, coolant equipment
14
X: 650 mm Y: 510 mm Z: 510 mm Mounting table: 800 x 450 mm T-tongues: size/quantity/distance Table load: max. 400 kg Working height: 760 mm Spindle diameter: 65 mm Speed range: 8000 rpm Spindle power: 7/9,25 kW Tool holder: SK 40 Tool changer: 16 -station Tool diameter: 80 mm Max. length tool: 250 mm Max. weight tool: 6 kg Rapid: 16000 m/min Control: Siemens 802D Weight of machine: 3500 kg Space requirement (W x D x H): 2,15 x 2,1 x 2,45 m Condition: working condition Working hour: 9325 h Accessory: Documentation, no futher accessories
X: 650 mm
Y: 510 mm
Z: 510 mm
Mounting table: 800 x 450 mm
T-tongues: size/quantity/distance
Table load: max. 400 kg
Working height: 760 mm
Spindle diameter: 65 mm
Speed range: 8000 rpm
Spindle power: 7/9,25 kW
Tool holder: SK 40
Tool changer: 16 -station
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Rapid: 16000 m/min
Control: Siemens 802D
Weight of machine: 3500 kg
Space requirement (W x D x H): 2,15 x 2,1 x 2,45 m
Condition: working condition
Working hour: 9325 h


Accessory: Documentation, no futher accessories
9
Load capacity: 16 kg Range working radius: 1550 mm Control Modul: IRC5 M2004 Robot version: IRB 2400/16 Type B - M2004 Teach Panel: FlexPendant Remote I/O Unit: DSQC 350A Number of axes: 6 Total power: 1 kW Weight of machine: 800 kg Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m Condition: very good Working hour: 37095 h well-kept robot, usable immediately Accessory: Documentation, all cables
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h

well-kept robot, usable immediately

Accessory: Documentation, all cables
14
X: 4050 mm Y: 2050 mm Z: 250 mm Mounting table: 4200 x 2150 mm Speed range: 12 kW - 36.000 rpm Taper fixture: HSK E40 Control: MDSI 6.0 on XP computer Tool changer: 10 -station Tool diameter: 13 mm Hours of operation: 23589 h Spindle on: 7736 h Total power: 15 kW Weight of machine: 4900 kg Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m Condition: good tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
X: 4050 mm
Y: 2050 mm
Z: 250 mm
Mounting table: 4200 x 2150 mm
Speed range: 12 kW - 36.000 rpm
Taper fixture: HSK E40
Control: MDSI 6.0 on XP computer
Tool changer: 10 -station
Tool diameter: 13 mm
Hours of operation: 23589 h
Spindle on: 7736 h
Total power: 15 kW
Weight of machine: 4900 kg
Space requirement (W x D x H): 6,7 x 3,12 x 2,6 m
Condition: good

tool length scanning, spindel type: Reckerth Typ MSPF-125/36-12/FBLP/HSK-F40, frequency converter Berges Typ SWPK 400150 H12, vacuum pump Busch Typ RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: Depureco Typ T22/100, cooling pump: company Chilly 25-5, the system was completely checked by Wissner service technicians

Accessory: overhauled replacement spindel Reckerth with acceptance report, 10 holders with collets, 15 additional collets, documentation
14
X: 1050 mm Y: 600 mm Z: 600 mm Table size: 1150 x 600 mm Speed range: 8.000 rpm Taper fixture: BT 40 Internal coolant: 20 bar Tool changer: 24 -station Control: Fanuc 0i-MD Hours of operation: 31575 h Program run: 8510 h Total power: 40 kW Weight of machine: 7.200 kg Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m Condition: very good filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
X: 1050 mm
Y: 600 mm
Z: 600 mm
Table size: 1150 x 600 mm
Speed range: 8.000 rpm
Taper fixture: BT 40
Internal coolant: 20 bar
Tool changer: 24 -station
Control: Fanuc 0i-MD
Hours of operation: 31575 h
Program run: 8510 h
Total power: 40 kW
Weight of machine: 7.200 kg
Space requirement (W x D x H): 4,0 x 2,2 x 2,7 m
Condition: very good

filtration plant with coolant device AME HSP 350, band filter, coolant storage 2270 l, chip conveyor AME SB 200, without the pictured vises

Accessory: measuring feeler, documentation, 1 piece taper fixture, exhaust unit
12
Cutting diameter: 400 mm Section thickness: 500 mm Sectional area 90° circular: 400 mm Sectional area 90° flat: 500 X 400 mm Cutting speed: stepless from 15 to 150 m/min Working height: 750 mm Saw blade dimensions: 6220 X 41 X 1,3 mm Remaining piece length: automat 110 mm Smallest diameter: 5 mm Chip conveyor: yes Feed length: 0 - 600 mm Lowering speed: 0 - 750 mm/sec. Material weight: 500 kg Working hour: 4500 h Total power: 8,0 kW Weight of machine: 1950 kg Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m Cutting area rectangle: 500 x 410 mm neat machine, without roller conveyors Accessory: 2 saw blades, documentation
Cutting diameter: 400 mm
Section thickness: 500 mm
Sectional area 90° circular: 400 mm
Sectional area 90° flat: 500 X 400 mm
Cutting speed: stepless from 15 to 150 m/min
Working height: 750 mm
Saw blade dimensions: 6220 X 41 X 1,3 mm
Remaining piece length: automat 110 mm
Smallest diameter: 5 mm
Chip conveyor: yes
Feed length: 0 - 600 mm
Lowering speed: 0 - 750 mm/sec.
Material weight: 500 kg
Working hour: 4500 h
Total power: 8,0 kW
Weight of machine: 1950 kg
Space requirement (W x D x H): 1,7 m x 3,1 m x 2,2 m m
Cutting area rectangle: 500 x 410 mm

neat machine, without roller conveyors

Accessory: 2 saw blades, documentation
13
Ultrasonic power: 8,4 kW Component weight max.: 5000 kg Volume: 2000 ltr Heating capacity: 51 kW Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm Space requirement (W x D x H): 12 x 3,2 x 2,1 m Total power: 60 kW Condition: very good mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use
Ultrasonic power: 8,4 kW
Component weight max.: 5000 kg
Volume: 2000 ltr
Heating capacity: 51 kW
Internal usable dimensions L/W/H: 1600/ 1000/ 1250 mm
Space requirement (W x D x H): 12 x 3,2 x 2,1 m
Total power: 60 kW
Condition: very good

mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds, well-kept facility, was hardly in use

Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.

Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !

Sign up now for free