_thumb.jpg "Показывать рекламу")
_thumb.jpg "Показывать рекламу")
_thumb.jpg "Показывать рекламу")
13
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18588Hersteller: BATTENFELDYear of construction: 2007Clamping unitClamping force: 30 tonDistance between tie bars: 300 x 300 mmMould height min.: 150 mmMould height max.: 330 mmOpening width: 580 mmPlaten size (h x v): 450 x 450 mmInjection unitScrew diameter: 18 mmInjection volume: 19 cm³Shot weight: 17,5 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,5 x 1,1 x 1,9 mMachine weight: 2700 kgFurther information:BATTENFELD EM 30/55 UNILOG B6All-Electric Precision Injection Moulding MachineThe offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:* very low energy consumption* high repeatability and precision* quiet machine operation* low maintenance requirementsThe machine is especially suitable for:* technical plastic parts* medical products* electronic components* small precision partsThanks to its all-electric drive technology, the machine offers:* significantly lower energy consumption compared to hydraulic machines* clean production environment* stable cycle times* precise dosing and excellent process stabilityThe machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
Ref. no.: 18588
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Further information:
BATTENFELD EM 30/55 UNILOG B6
All-Electric Precision Injection Moulding Machine
The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.
The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:
* very low energy consumption
* high repeatability and precision
* quiet machine operation
* low maintenance requirements
The machine is especially suitable for:
* technical plastic parts
* medical products
* electronic components
* small precision parts
Thanks to its all-electric drive technology, the machine offers:
* significantly lower energy consumption compared to hydraulic machines
* clean production environment
* stable cycle times
* precise dosing and excellent process stability
The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.
With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.
The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 30 ton
Distance between tie bars: 300 x 300 mm
Mould height min.: 150 mm
Mould height max.: 330 mm
Opening width: 580 mm
Platen size (h x v): 450 x 450 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 19 cm³
Shot weight: 17,5 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 1,1 x 1,9 m
Machine weight: 2700 kg
Further information:
BATTENFELD EM 30/55 UNILOG B6
All-Electric Precision Injection Moulding Machine
The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance.
The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing:
* very low energy consumption
* high repeatability and precision
* quiet machine operation
* low maintenance requirements
The machine is especially suitable for:
* technical plastic parts
* medical products
* electronic components
* small precision parts
Thanks to its all-electric drive technology, the machine offers:
* significantly lower energy consumption compared to hydraulic machines
* clean production environment
* stable cycle times
* precise dosing and excellent process stability
The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management.
With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year.
The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
7
Металлообработка и станкиКомпрессоры
Leistung: 5,5 KWDruckbehälter: 50 LMaschinengewicht ca.: 0,450 tRaumbedarf ca.: . mFörderdruck: 330 barLiterleistung: . l
Leistung: 5,5 KW
Druckbehälter: 50 L
Maschinengewicht ca.: 0,450 t
Raumbedarf ca.: . m
Förderdruck: 330 bar
Literleistung: . l
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Druckbehälter: 50 L
Maschinengewicht ca.: 0,450 t
Raumbedarf ca.: . m
Förderdruck: 330 bar
Literleistung: . l
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
13
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 16369Hersteller: BATTENFELDYear of construction: 2005Clamping unitClamping force: 75 tonOpening stroke: 800 mmDistance between tie bars: 405 x 405 mmMould height min.: 150 mmMould height max.: 480 mmInjection unitScrew diameter: 18 mmInjection volume: 30 cm³Shot weight: 27 gInjection pressure: 2440 barMeasurements and weightDimensions: 4,5 x 1,7 x 2,0 mMachine weight: 4500 kgFurther information:BATTENFELD EM 75/120 UNILOG B4All-Electric Precision Injection Moulding MachineThe BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.All major machine movements are driven by modern servo motors, providing:* very low energy consumption* high repeatability and precision* smooth and quiet machine operation* low maintenance requirements* stable and accurate production performanceThe machine is especially suitable for:* technical plastic components* electronic parts* precision moulded products* small and medium-sized production runsCompared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:* user-friendly operation* precise process control* stable cycle times* accurate servo axis managementThe machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:* a clean electrical cabinet* well-maintained mechanical components* properly kept servo-electric units* a clean injection unitThe BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Ref. no.: 16369
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: BATTENFELD
Year of construction: 2005
Clamping unit
Clamping force: 75 ton
Opening stroke: 800 mm
Distance between tie bars: 405 x 405 mm
Mould height min.: 150 mm
Mould height max.: 480 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 30 cm³
Shot weight: 27 g
Injection pressure: 2440 bar
Measurements and weight
Dimensions: 4,5 x 1,7 x 2,0 m
Machine weight: 4500 kg
Further information:
BATTENFELD EM 75/120 UNILOG B4
All-Electric Precision Injection Moulding Machine
The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.
All major machine movements are driven by modern servo motors, providing:
* very low energy consumption
* high repeatability and precision
* smooth and quiet machine operation
* low maintenance requirements
* stable and accurate production performance
The machine is especially suitable for:
* technical plastic components
* electronic parts
* precision moulded products
* small and medium-sized production runs
Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability.
Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides:
* user-friendly operation
* precise process control
* stable cycle times
* accurate servo axis management
The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show:
* a clean electrical cabinet
* well-maintained mechanical components
* properly kept servo-electric units
* a clean injection unit
The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
10
Lagernummer: 1077-Z1041Maschinenart: SondermaschineFabrikat: BATTENFELDTyp: DruckregeleinheitBaujahr: -Steuerung: konventionellLagerort: DorstenUrsprungsland: -Lieferzeit: sofortFrachtbasis: ab StandortPreis: Auf Anfrage
Lagernummer: 1077-Z1041
Maschinenart: Sondermaschine
Fabrikat: BATTENFELD
Typ: Druckregeleinheit
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Maschinenart: Sondermaschine
Fabrikat: BATTENFELD
Typ: Druckregeleinheit
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.