4
Металлообработка и станкиСтанки для обработки листового металлаЛистогибочные прессы
pressing capacity: 40 toBending length: 1550 mmAxes: X and Y axisStroke: 160 mmInside distance between side frames: 1260 mmGap in side frame: 320 mmDaylight: 380 mmPower concept: hydraulicrapid speed Y-axis: 90 mm/sWorking speed Y-axis: 10Back gauge travel X-axis: 500 mmTable height: 845 mmTable width: 100 mmOiltank: 120 lMotor power: 4 kWLength: 2000 mmWidth: 1600 mmHeight: 2235 mmWeight: 3450 kg
pressing capacity: 40 to
Bending length: 1550 mm
Axes: X and Y axis
Stroke: 160 mm
Inside distance between side frames: 1260 mm
Gap in side frame: 320 mm
Daylight: 380 mm
Power concept: hydraulic
rapid speed Y-axis: 90 mm/s
Working speed Y-axis: 10
Back gauge travel X-axis: 500 mm
Table height: 845 mm
Table width: 100 mm
Oiltank: 120 l
Motor power: 4 kW
Length: 2000 mm
Width: 1600 mm
Height: 2235 mm
Weight: 3450 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Bending length: 1550 mm
Axes: X and Y axis
Stroke: 160 mm
Inside distance between side frames: 1260 mm
Gap in side frame: 320 mm
Daylight: 380 mm
Power concept: hydraulic
rapid speed Y-axis: 90 mm/s
Working speed Y-axis: 10
Back gauge travel X-axis: 500 mm
Table height: 845 mm
Table width: 100 mm
Oiltank: 120 l
Motor power: 4 kW
Length: 2000 mm
Width: 1600 mm
Height: 2235 mm
Weight: 3450 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
3
Металлообработка и станкиСтанки для обработки листового металлаВыпрямители кормов
Coil weight: 500 kgCoil outer diameter: 1200 mmMin. coil inner diameter: 400 mmMax. Coil inner diameter: 550Max. coil width: 300 mmMin. coil width for version with pneumatic downholder: 80 mmLength: 1450 mmWidth: 1200 mmHeight: 1640 mmWeight: 260 kg
Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1450 mm
Width: 1200 mm
Height: 1640 mm
Weight: 260 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Coil outer diameter: 1200 mm
Min. coil inner diameter: 400 mm
Max. Coil inner diameter: 550
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1450 mm
Width: 1200 mm
Height: 1640 mm
Weight: 260 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Металлообработка и станкиСтанки для обработки листового металлаШтамповка
Punching power: 55 tonThroat depth: 750 mmMax. diameter at sheet thickness (mild steel): 40x14 mmMax. number of strokes at 20 mm stroke: 37 1/minMotor: 5 kWLength: 1930 mmWidth: 1200 mmHeight: 1800 mmWeight: 1885 kg
Punching power: 55 ton
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1930 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1885 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 37 1/min
Motor: 5 kW
Length: 1930 mm
Width: 1200 mm
Height: 1800 mm
Weight: 1885 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
7
Металлообработка и станкиСтанки для обработки листового металлаГильотинные ножницы
Cutting length: 3100 mmMax. thickness - mild steel: 6 mmCutting angle: 0.5 - 3.5 °Motor power: 9 kWTable height: 950 mmLength: 4070 mmWidth: 2330 mmTotal width with support arm und protection fence: 3400 mmHeight: 1850 mmWeight: 5500 kg
Cutting length: 3100 mm
Max. thickness - mild steel: 6 mm
Cutting angle: 0.5 - 3.5 °
Motor power: 9 kW
Table height: 950 mm
Length: 4070 mm
Width: 2330 mm
Total width with support arm und protection fence: 3400 mm
Height: 1850 mm
Weight: 5500 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Max. thickness - mild steel: 6 mm
Cutting angle: 0.5 - 3.5 °
Motor power: 9 kW
Table height: 950 mm
Length: 4070 mm
Width: 2330 mm
Total width with support arm und protection fence: 3400 mm
Height: 1850 mm
Weight: 5500 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
14
Печатное оборудованиеПереплетные машины
Horizon BQ 470
Horizon BQ 470
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
4
Печатное оборудованиеОборудование для резки бумаги
Polar 92 X plusYear 2011Full TouchscreenAir table2 side tables2 knivesPhoto cellsProgramBackside safetycover with switch
Polar 92 X plus
Year 2011
Full Touchscreen
Air table
2 side tables
2 knives
Photo cells
Program
Backside safetycover with switch
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Year 2011
Full Touchscreen
Air table
2 side tables
2 knives
Photo cells
Program
Backside safetycover with switch
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
_thumb.jpeg "Показывать рекламу")
15
Печатное оборудованиеОборудование для постпечатной обработкиКоллаторы
MKW 30 UT/20GS/AW/HVYear 80/200020 stations collating machineComplete with stitching unit type 50/SFT3502 x Hohner 52-8 stitching heads.and Jogger
MKW 30 UT/20GS/AW/HV
Year 80/2000
20 stations collating machine
Complete with stitching unit type 50/SFT350
2 x Hohner 52-8 stitching heads.
and Jogger
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Year 80/2000
20 stations collating machine
Complete with stitching unit type 50/SFT350
2 x Hohner 52-8 stitching heads.
and Jogger
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
 -1_thumb.jpeg "Показывать рекламу")
 -2_thumb.jpeg "Показывать рекламу")
 -3_thumb.jpeg "Показывать рекламу")
 -4_thumb.jpeg "Показывать рекламу")
 -5_thumb.jpeg "Показывать рекламу")
 -6 _thumb.jpg "Показывать рекламу")
7
Печатное оборудованиеСтопоукладчики
Polar Mohr LW 1000-4 Paper Stack LiftIn very good condition.Automatic hight adjustment controlled by a photocell or manual mode,.Load capacity: 1000 kg.Pallet dimensions: 1200 x 800
Polar Mohr LW 1000-4 Paper Stack Lift
In very good condition.
Automatic hight adjustment controlled by a photocell or manual mode,.
Load capacity: 1000 kg.
Pallet dimensions: 1200 x 800
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
In very good condition.
Automatic hight adjustment controlled by a photocell or manual mode,.
Load capacity: 1000 kg.
Pallet dimensions: 1200 x 800
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
9
Печатное оборудованиеПереплетные машины
FOR SALE: ODM Sticker™ Casing-in MachineThe ODM Sticker™ is a high-quality, compact casing-in machine designed for library binding and short-run hard cover book production. It is famous for being self-adjusting, requiring no make-ready time, and offering outstanding value and performance.Technical Specifications:Maximum Book Size (Standard): 27.9 x 35.6 x 10.2 cmMinimum Book Size (Standard): 10.2 x 10.2 x 0.1 cmOutput: 100 to 400 books per hourFloor Space Required: 106.7 x 68.6 cmNet Weight: Approx. 159 kg (350 lbs)Power Requirements: 230V.Key Features:No Make-Ready: The machine is self-adjusting to different book thicknesses, making it ideal for "on-demand" production.User-Friendly: Easy-to-use control panel for efficient operation.Compact Design: Small footprint, fits into almost any production environment.Easy Maintenance: Glue stations are easily removed for quick and simple clean-up.
FOR SALE: ODM Sticker™ Casing-in Machine
The ODM Sticker™ is a high-quality, compact casing-in machine designed for library binding and short-run hard cover book production. It is famous for being self-adjusting, requiring no make-ready time, and offering outstanding value and performance.
Technical Specifications:
Maximum Book Size (Standard): 27.9 x 35.6 x 10.2 cm
Minimum Book Size (Standard): 10.2 x 10.2 x 0.1 cm
Output: 100 to 400 books per hour
Floor Space Required: 106.7 x 68.6 cm
Net Weight: Approx. 159 kg (350 lbs)
Power Requirements: 230V.
Key Features:
No Make-Ready: The machine is self-adjusting to different book thicknesses, making it ideal for "on-demand" production.
User-Friendly: Easy-to-use control panel for efficient operation.
Compact Design: Small footprint, fits into almost any production environment.
Easy Maintenance: Glue stations are easily removed for quick and simple clean-up.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
7
Металлообработка и станкиСтанки для обработки листового металлаПоворотно-гибочные станки
Bending length: 4010 mmBending capacity steel 400 N/mm²: 1.5 mmBending capacity Alu 190 N/mm²: 2 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2900 kg
Bending length: 4010 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
4
Металлообработка и станкиПрессыЭксцентриковые прессы
pressing capacity: 160 toTonnage rating point: 6 mmTable length: 1200 mmTable width: 650 mmHole in table: 200 mmStroke: 16 - 160 mmStrokes: 35 - 55 1/minRam: 740x420 mmRam guides: 8Ram adjustment: 100 mmThroat depth: 330 mmDistance between columns: 690 mmMotor: 15 kWLength: 1410 mmWidth: 2220 mmHeight: 3544 mmWeight: 16000 kg
pressing capacity: 160 to
Tonnage rating point: 6 mm
Table length: 1200 mm
Table width: 650 mm
Hole in table: 200 mm
Stroke: 16 - 160 mm
Strokes: 35 - 55 1/min
Ram: 740x420 mm
Ram guides: 8
Ram adjustment: 100 mm
Throat depth: 330 mm
Distance between columns: 690 mm
Motor: 15 kW
Length: 1410 mm
Width: 2220 mm
Height: 3544 mm
Weight: 16000 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Tonnage rating point: 6 mm
Table length: 1200 mm
Table width: 650 mm
Hole in table: 200 mm
Stroke: 16 - 160 mm
Strokes: 35 - 55 1/min
Ram: 740x420 mm
Ram guides: 8
Ram adjustment: 100 mm
Throat depth: 330 mm
Distance between columns: 690 mm
Motor: 15 kW
Length: 1410 mm
Width: 2220 mm
Height: 3544 mm
Weight: 16000 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
3
Металлообработка и станкиСтанки для обработки листового металлаПоворотно-гибочные станки
Bending length: 3100 mmSheet thickness (420 N/mm²): 4.5 mmAntrieb: HydraulicMax. bending angle: 135 °Length: 4500 mmWidth: 1750 mmHeight: 1950 mmWeight: 5500 kg
Bending length: 3100 mm
Sheet thickness (420 N/mm²): 4.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 4500 mm
Width: 1750 mm
Height: 1950 mm
Weight: 5500 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Sheet thickness (420 N/mm²): 4.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 4500 mm
Width: 1750 mm
Height: 1950 mm
Weight: 5500 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
3
Металлообработка и станкиСтанки для обработки листового металлаПоворотно-гибочные станки
Bending length: 2035 mmSheet thickness (420 N/mm²): 6.5 mmAntrieb: HydraulicMax. bending angle: 135 °Length: 3300 mmWidth: 1550 mmHeight: 1900 mmWeight: 3710 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 6.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3710 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Sheet thickness (420 N/mm²): 6.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3710 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
3
Металлообработка и станкиСтанки для обработки листового металлаПоворотно-гибочные станки
Bending length: 2035 mmSheet thickness (420 N/mm²): 4.5 mmAntrieb: HydraulicMax. bending angle: 135 °Length: 3300 mmWidth: 1550 mmHeight: 1900 mmWeight: 3200 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 4.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Sheet thickness (420 N/mm²): 4.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Pivot frameBand dimensions: 3120x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 350x140 mmCutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mmCutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mmCutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1550 mmHeight: 1750 mmWeight: 460 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Pivot frameBand dimensions: 3120 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 350x140 mmCutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mmCutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mmCutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mmWorking height: 830 mmLength: 1550 mmWidth: 1400 mmHeight: 1750 mmWeight: 420 kg
Saw frame: Pivot frame
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Pivot frameBand dimensions: 3120x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° flat: 370x140 mmCutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mmCutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mmWorking height: 830 mmLength: 1550 mmWidth: 1400 mmHeight: 1900 mmWeight: 353 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 370x140 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1900 mm
Weight: 353 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° flat: 370x140 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1900 mm
Weight: 353 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
8
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Pivot frameBand dimensions: 2450x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 220 mmCutting capacity 0° square: 220 mmCutting capacity 0° flat: 260x140 mmCutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mmCutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mmWorking height: 965 mmLength: 1200 mmWidth: 1100 mmHeight: 1860 mmWeight: 240 kg
Saw frame: Pivot frame
Band dimensions: 2450x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° flat: 260x140 mm
Cutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mm
Cutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 2450x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° flat: 260x140 mm
Cutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mm
Cutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
4
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Double columnBand dimensions: 4800x34x1,1 mmBand speed continous: 20-100 m/minCutting capacity 0° round: 380 mmCutting capacity 0° square: 380 mmCutting capacity 0° flat: 430x380 mmWorking height: 590 mmHydraulic motor: 0.55 kWMotor: 3 kWCoolant pump motor: 0.12 kWLength: 2900 mmWidth: 950 mmHeight: 1660 mmWeight: 1342 kg
Saw frame: Double column
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 430x380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2900 mm
Width: 950 mm
Height: 1660 mm
Weight: 1342 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 430x380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2900 mm
Width: 950 mm
Height: 1660 mm
Weight: 1342 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
8
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Double columnBand dimensions: 4380x34x1,1 mmBand speed continous: 20-100 m/minCutting capacity 0° round: 325 mmCutting capacity 0° square: 325 mmCutting capacity 0° flat: 400x315 mmCutting capacity 30°: rund 325 mm, quadrat 315 mm, rechteck 380 x 315 mmCutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 315 mmCutting capacity 60°: rund 190 mm, quadrat 190 mm, rechteck 160 x 325 mmWorking height: 655 mmHydraulic motor: 1.1 kWMotor: 2.2 kWCoolant pump motor: 0.12 kWLength: 2130 mmWidth: 2150 mmHeight: 1650 mmWeight: 1860 kg
Saw frame: Double column
Band dimensions: 4380x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 325 mm
Cutting capacity 0° flat: 400x315 mm
Cutting capacity 30°: rund 325 mm, quadrat 315 mm, rechteck 380 x 315 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 315 mm
Cutting capacity 60°: rund 190 mm, quadrat 190 mm, rechteck 160 x 325 mm
Working height: 655 mm
Hydraulic motor: 1.1 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2130 mm
Width: 2150 mm
Height: 1650 mm
Weight: 1860 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 4380x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 325 mm
Cutting capacity 0° square: 325 mm
Cutting capacity 0° flat: 400x315 mm
Cutting capacity 30°: rund 325 mm, quadrat 315 mm, rechteck 380 x 315 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 315 mm
Cutting capacity 60°: rund 190 mm, quadrat 190 mm, rechteck 160 x 325 mm
Working height: 655 mm
Hydraulic motor: 1.1 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Length: 2130 mm
Width: 2150 mm
Height: 1650 mm
Weight: 1860 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиТокарные станки
Swing over bed: 400 mmDistance between centers: 1000 mmCentre height: 200 mmSpindle bore: 52 mmswing over cross slide: 235 mmWidth of bed: 320 mmSpindle nose / DIN55027: 6Spindle taper: 6 MSpindle speed steps: 12Spindle revs: 50–2.240 rpmNumber of feeds: 80Longitudinal feed range: 0.015 - 0.6 mm/rCross feed range: 0.0075 - 0.3 mm/rNumber of threads: 40Metric thread range: 0.25 - 7.5 mmInch thread range: 120 - 4 TpiModule thread range: 0.0625 - 1.875DP thread range: 480 – 16Cross slide travel: 235 mmTop slide travel: 110 mmTailstock quill diameter: 50 mmTailstock quill taper: 4 MKTailstock travel: 100 mmMotor power: 4 kWLength: 2750 mmWidth: 1100 mmHeight: 1600 mmWeight: 1540 kg
Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
10
Металлообработка и станкиСтанки для обработки листового металлаСтанки для сгибания труб
Round tube: 42 x 2,5 mmSquare tube: 40 x 1,2 mmRect. tube easy way: 30 x 40 x 1,7 mmRect. tube hard way: 40 x 30 x 1,3 mmMax. bending radius: 255 mmMin. bending radius: 22 mmMax. bending angle: 180 °Speed: 90 °/sMotor: 5 kWHydraulic oil capacity: 120 lLength: 4665 mmWidth: 800 mmHeight: 1160 mmWeight: 1470 kg
Round tube: 42 x 2,5 mm
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
13
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18643Hersteller: ARBURGYear of construction: 2008Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 470 x 470 mmMould height min.: 250 mmOpening width: 750 mmInjection unitScrew diameter: 35 mmInjection volume: 154 cm³Shot weight: 141 gInjection pressure: 2500 barMeasurements and weightMachine weight: 4850 kgDimensions LxWxH part 1: 4,6 x 1,6 x 2,1 mAdditional information & extrasCore pull: 1 pcsFurther information:Communication card for ProSeS interface is available (OPC-UA).Robot interface is available (EUROMAP 67).
Ref. no.: 18643
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ARBURG
Year of construction: 2008
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar
Measurements and weight
Machine weight: 4850 kg
Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m
Additional information & extras
Core pull: 1 pcs
Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
4
Металлообработка и станкиСверлильные станки и расточные станки
Drilling capacy mild steel: 18 mmTaper: MK 2Distance spindle - column: 240 mmRevs: 30 - 3000 r.p.m.Tapping capacity: M12Quill travel: 100 mmDistance spindle - table: 155 - 415 mmDistance spindle-base: 155 - 550 mmTable: 340 x 280 mmColumn diameter: 82 mmLength: 355 mmWidth: 705 mmHeight: 1065 mmWeight: 170 kg
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
7
Металлообработка и станкиСтанки для обработки листового металлаЛистогибочные прессы
Druck: 100 tAbkantlänge: 3000 mmStänderweite: 2550 mmHub: 150 mmGesamtleistungsbedarf: kWBetriebsstunden: . hMaschinengewicht ca.: 8,3 tRaumbedarf ca.: m
Druck: 100 t
Abkantlänge: 3000 mm
Ständerweite: 2550 mm
Hub: 150 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: . h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Abkantlänge: 3000 mm
Ständerweite: 2550 mm
Hub: 150 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: . h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
5
Металлообработка и станкиСверлильные станки и расточные станки
Drilling capacy mild steel: 18 mmTaper: MK 2Distance spindle - column: 240 mmRevs: 30 - 3000 r.p.m.Tapping capacity: M12Feeds: manual mm/rColumn diameter: 82 mmDistance spindle - table: 180 - 870 mmTable: 340 x 280 mmQuill travel: 100 mmLength: 705 mmWidth: 355 mmHeight: 1825 mmWeight: 195 kg
Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
10
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18565Hersteller: DEMAGYear of construction: 2005Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 500 x 500 mmMould height min.: 250 mmOpening width: 750 mmPlaten size (h x v): 750 x 750 mmInjection unitScrew diameter: 45 mmInjection volume: 323 cm³Shot weight: 290 gInjection pressure: 1973 barMeasurements and weightDimensions: 5.45 x 1.63 x 2.1 mMachine weight: 7500 kgRobotProducer: Wittmann Type: W721-0231 Year: 2005
Ref. no.: 18565
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: DEMAG
Year of construction: 2005
Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar
Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg
Robot
Producer: Wittmann
Type: W721-0231
Year: 2005
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
5
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Double columnBand dimensions: 5200x41x1,3 mmBand speed continous: 20-100 m/minCutting capacity 0° round: 460 mmCutting capacity 0° square: 460 mmCutting capacity 0° flat: 650x460 mmCutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mmWorking height: 590 mmHydraulic motor: 0.55 kWMotor: 4 kWCoolant pump motor: 0.12 kWLength: 3100 mmWidth: 1000 mmHeight: 1800 mmWeight: 1520 kg
Saw frame: Double column
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
10
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Double columnBand dimensions: 5400x41x1,3 mmBand speed continous: 20-100 m/minCutting capacity 0° round: 450 mmCutting capacity 0° square: 425 mmCutting capacity 0° flat: 560x425 mmCutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mmCutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 425 x 260 mmWorking height: 690 mmHydraulic motor: 0.55 kWMotor: 4 kWCoolant pump motor: 0.12 kWLength: 3090 mmWidth: 1200 mmHeight: 1940 mmWeight: 1630 kg
Saw frame: Double column
Band dimensions: 5400x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 450 mm
Cutting capacity 0° square: 425 mm
Cutting capacity 0° flat: 560x425 mm
Cutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mm
Cutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 425 x 260 mm
Working height: 690 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3090 mm
Width: 1200 mm
Height: 1940 mm
Weight: 1630 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 5400x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 450 mm
Cutting capacity 0° square: 425 mm
Cutting capacity 0° flat: 560x425 mm
Cutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mm
Cutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 425 x 260 mm
Working height: 690 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3090 mm
Width: 1200 mm
Height: 1940 mm
Weight: 1630 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
6
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Double columnBand dimensions: 4800x34x1,1 mmBand speed continous: 20-100 m/minCutting capacity 0° round: 380 mmCutting capacity 0° square: 380 mmCutting capacity 0° flat: 520x380 mmCutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mmWorking height: 590 mmHydraulic motor: 0.55 kWMotor: 3 kWCoolant pump motor: 0.12 kWLength: 2850 mmWidth: 930 mmHeight: 1660 mmWeight: 1330 kg
Saw frame: Double column
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Металлообработка и станкиПилыЛенточные пилы
Saw frame: Pivot frameBand dimensions: 4160x34x1,1 mmBand speed continous: 20-100 m/minCutting capacity 0° round: 320 mmCutting capacity 0° square: 320 mmCutting capacity 0° flat: 610x320 mmCutting capacity 30°: rund 260 mm, quadrat 225 mm, rechteck 280 x 200 mmCutting capacity 45°: rund 320 mm, quadrat 320 mm, rechteck 355 x 320 mmCutting capacity 60°: rund 320 mm, quadrat 320 mm, rechteck 510 x 320 mmWorking height: 740 mmHydraulic motor: 0.37 kWMotor: 2.2 kWCoolant pump motor: 0.12 kWCutting capacity 75°: rund 320 mm, quadrat 320 mm, rechteck 580 x 320 mmLength: 2100 mmWidth: 1200 mmHeight: 1350 mmWeight: 1150 kg
Saw frame: Pivot frame
Band dimensions: 4160x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 610x320 mm
Cutting capacity 30°: rund 260 mm, quadrat 225 mm, rechteck 280 x 200 mm
Cutting capacity 45°: rund 320 mm, quadrat 320 mm, rechteck 355 x 320 mm
Cutting capacity 60°: rund 320 mm, quadrat 320 mm, rechteck 510 x 320 mm
Working height: 740 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Cutting capacity 75°: rund 320 mm, quadrat 320 mm, rechteck 580 x 320 mm
Length: 2100 mm
Width: 1200 mm
Height: 1350 mm
Weight: 1150 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Band dimensions: 4160x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 610x320 mm
Cutting capacity 30°: rund 260 mm, quadrat 225 mm, rechteck 280 x 200 mm
Cutting capacity 45°: rund 320 mm, quadrat 320 mm, rechteck 355 x 320 mm
Cutting capacity 60°: rund 320 mm, quadrat 320 mm, rechteck 510 x 320 mm
Working height: 740 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Cutting capacity 75°: rund 320 mm, quadrat 320 mm, rechteck 580 x 320 mm
Length: 2100 mm
Width: 1200 mm
Height: 1350 mm
Weight: 1150 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Металлообработка и станкиСтанки для обработки листового металлаШтамповка
Punching power: 50 tonThroat depth: 130 mmMax. diameter at sheet thickness (mild steel): 13/27 mmMax. number of strokes at 20 mm stroke: 23 1/minMotor: 3 kWLength: 1100 mmWidth: 900 mmHeight: 1550 mmWeight: 355 kg
Punching power: 50 ton
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 13/27 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 13/27 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиСтанки для обработки листового металлаВыпрямители кормов
Coil weight: 4000 kgCoil outer diameter: 1300 mmMin. coil inner diameter: 450 - 550 mmMax. coil width: 600 mmMin. Coil width: 50Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 4000 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиСтанки для обработки листового металлаВыпрямители кормов
Coil weight: 2500 kgCoil outer diameter: 1300 mmMin. coil inner diameter: 450 mmMax. Coil inner diameter: 550Max. coil width: 600 mmMin. Coil width: 50Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиСтанки для обработки листового металлаВыпрямители кормов
Coil weight: 2500 kgCoil outer diameter: 1300 mmMin. coil inner diameter: 450 - 550 mmMax. coil width: 400 mmMin. Coil width: 50Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиСтанки для обработки листового металлаВыпрямители кормов
Coil weight: 1250 kgCoil outer diameter: 1300 mmMin. coil inner diameter: 450 - 550 mmMax. coil width: 400 mmMin. Coil width: 50Min. coil width for version with pneumatic downholder: 80 mm
Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
8
Металлообработка и станкиСтанки для снятия заусенцев
Working width: 1300Sheet thickness range - mild steel: 150 mmBrush diameter: 150 mmVacuum area: 250x350 mmTable height: 945 mmMotor: 0.75 kWLength: 1400 mmWidth: 1000 mmHeight: 1450 mmWeight: 300 kg
Working width: 1300
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Sheet thickness range - mild steel: 150 mm
Brush diameter: 150 mm
Vacuum area: 250x350 mm
Table height: 945 mm
Motor: 0.75 kW
Length: 1400 mm
Width: 1000 mm
Height: 1450 mm
Weight: 300 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Металлообработка и станкиСтанки для обработки листового металлаГильотинные ножницы
Cutting length: 1030 mmMax. thickness - mild steel: 10 mmMax. thickness - stainless steel: 6 mmStrokes: 10 1/minCutting angle: 3 °Number of downholders: 7 pcs.Back gauge: 5000 mmMotor power: 11 kWOiltank: 100 lTable height: 900 mmLength: 1550 mmWidth: 1150 mmHeight: 1600 mmWeight: 1900 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Металлообработка и станкиСтанки для обработки листового металлаГильотинные ножницы
Cutting length: 1030 mmMax. thickness - mild steel: 8 mmMax. thickness - stainless steel: 5 mmStrokes: 14 1/minCutting angle: 3 °Number of downholders: 7 pcs.Back gauge: 500 mmMotor power: 7.5 kWOiltank: 100 lTable height: 900 mmLength: 1550 mmWidth: 1150 mmHeight: 1600 mmWeight: 1800 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
1
Металлообработка и станкиСтанки для обработки листового металлаГильотинные ножницы
Cutting length: 1030 mmMax. thickness - mild steel: 6 mmMax. thickness - stainless steel: 4 mmStrokes: 14 1/minCutting angle: 3 °Number of downholders: 7 pcs.Back gauge: 500 mmMotor power: 5.5 kWOiltank: 100 lTable height: 900 mmLength: 1550 mmWidth: 1150 mmHeight: 1600 mmWeight: 1700 kg
Cutting length: 1030 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиСтанки для обработки листового металлаГильотинные ножницы
Cutting length: 6080 mmMax. thickness - mild steel: 6 mmMax. thickness - stainless steel: 4 mmGap in side frame: 350 mmStrokes: 10 1/minCutting angle: 0,5 - 2 °Number of downholders: 29 pcs.Pressure of downholder: 20 toBack gauge: 1000 mmBack gauge speed: 200 mm/sMotor power: 22 kWOiltank: 200 lSupport arms: 5 pcs.Table height: 900 mmTable width: 630 mmTable length: 6370 mmLength: 7300 mmWidth: 2150 mmTotal width with support arm und protection fence: 3400 mmHeight: 2750 mmWeight: 25500 kg
Cutting length: 6080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0,5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
2
Металлообработка и станкиТокарные станки
Swing over bed: 500 mmDistance between centers: 1500 mmCentre height: 250 mmSpindle bore: 80 mmswing over cross slide: 300 mmWidth of bed: 400 mmSpindle nose / DIN55027: 8Spindle taper: 80 MSpindle speed steps: 21Spindle revs: Array rpmNumber of feeds: 120Longitudinal feed range: 0.04 - 12 mm/rCross feed range: 0.02 - 6 mm/rNumber of threads: 64Metric thread range: 0.5 - 120 mmInch thread range: Array TpiModule thread range: 0.125 - 30DP thread range: ArrayCross slide travel: 315 mmTop slide travel: 130 mmTailstock quill diameter: 90 mmTailstock quill taper: 5 MKTailstock travel: 230 mmMotor power: 7 kWLength: 3100 mmWidth: 1250 mmHeight: 1400 mmWeight: 2820 kg
Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
13
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18591Hersteller: ARBURGYear of construction: 2005Clamping unitClamping force: 160 tonOpening stroke: 450 mmDistance between tie bars: 520 x 520 mmMould height min.: 250 mmMould height max.: 550 mmOpening width: 700 mmPlaten size (h x v): 695 x 695 mmInjection unitScrew diameter: 45 mmInjection volume: 254 cm³Shot weight: 232 gInjection pressure: 1580 barMeasurements and weightMachine weight: 7100 kgDimensions LxWxH part 1: 5,1 x 1,7 x 2,3 mFurther information:The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.Typical features of this series include:* Fully electric drive for all main movements* High energy efficiency compared to hydraulic machines* Excellent injection and positioning accuracy* Quiet and clean operation (also suitable for medical applications)* Low maintenance requirementsThe 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Ref. no.: 18591
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ARBURG
Year of construction: 2005
Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm
Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar
Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m
Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.
These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.
Typical features of this series include:
* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements
The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.
ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
10
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18494Hersteller: ENGELYear of construction: 2013Clamping unitClamping force: 50 tonOpening stroke: 400 mmMould height min.: 200 mmOpening width: 600 mmPlaten size (h x v): 500 X 450 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2400 barMeasurements and weightDimensions: 3,4 x 1,3 x 1,8 mMachine weight: 2900 kgAdditional information & extrasCore pull: 1 pcs
Ref. no.: 18494
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: ENGEL
Year of construction: 2013
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Mould height min.: 200 mm
Opening width: 600 mm
Platen size (h x v): 500 X 450 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 69 cm³
Shot weight: 62 g
Injection pressure: 2400 bar
Measurements and weight
Dimensions: 3,4 x 1,3 x 1,8 m
Machine weight: 2900 kg
Additional information & extras
Core pull: 1 pcs
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
5
Металлообработка и станкиСтанки для обработки листового металлаГибочные машины
Shaft diameter: 50Rolls diameter: 155 mmDriven rolls: 2Motor power: 1.5 kWSpeed: 4 m/minFlat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mmFlat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mmSquare bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mmRound bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mmTube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mmForm tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mmForm tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mmAngle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mmAngle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mmLength: 1050 mmWidth: 750 mmHeight: 1450 mmWeight: 390 kg
Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
11
Печатное оборудованиеФальцовочные машины
Herzog Heymann Vacuum beltHerzog & Heymann suction belt section, with alignment section.1 alignment ruler.3 tool shafts diameter 30 mm,4 suction and 2 conveyor belts (lenght 3.3m).Working width 72 cm, electrically height adjustable.Suction belt section length 3.30 m.Total machine length: ± 5.0mTotal machine width 1.1 mComplete with HSS C 1100 gluing system, with 3 cold glue nozlesSome tooling and spare parts
Herzog Heymann Vacuum belt
Herzog & Heymann suction belt section, with alignment section.
1 alignment ruler.
3 tool shafts diameter 30 mm,
4 suction and 2 conveyor belts (lenght 3.3m).
Working width 72 cm, electrically height adjustable.
Suction belt section length 3.30 m.
Total machine length: ± 5.0m
Total machine width 1.1 m
Complete with HSS C 1100 gluing system, with 3 cold glue nozles
Some tooling and spare parts
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
10
Металлообработка и станкиСверлильные станки и расточные станкиПластинчато-расточные станки
Spindeldurchmesser: 205 mmx-Weg: 10000 mmy-Weg: 2500 mmw-Achse: 500 mmSpindelweg: 1250 mmSteuerung: HeidenhainTyp: TNC 355Spindelaufnahme ISO: 50Getriebestufen: 2Vorschub - selbsttätig: 0-3000 mmSpindelantrieb: 37 kWGesamtleistungsbedarf: 70 kWMaschinengewicht ca.: tRaumbedarf ca.: 14,1x3,2x5,6 m
Spindeldurchmesser: 205 mm
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
8
Металлообработка и станкиТокарные станкиЦентровочно-токарные и шпиндельные станки
Drehdurchmesser über Bett: . mmDrehdurchmesser über Support: . mmDrehlänge: 5000 mmBohrtiefe: . mmDigitalanzeige: DigitalanzeigeSpitzenhöhe: 600 mmUmlauf über Bett: 1200 mmAntrieb: 55 PSSpindeldrehzahlen: 5-1000 U/minEilgang: quer 2000 mm/minZubehör:: Stahlhalter, LynettenGewicht ohne Lynette: zwischen Spitzen 8000 kgGewicht mit Lynette: zwischen Spitzen 11500 kgGesamtleistungsbedarf: kWMaschinengewicht ca.: ca. 20 tRaumbedarf ca.: m
Drehdurchmesser über Bett: . mm
Drehdurchmesser über Support: . mm
Drehlänge: 5000 mm
Bohrtiefe: . mm
Digitalanzeige: Digitalanzeige
Spitzenhöhe: 600 mm
Umlauf über Bett: 1200 mm
Antrieb: 55 PS
Spindeldrehzahlen: 5-1000 U/min
Eilgang: quer 2000 mm/min
Zubehör:: Stahlhalter, Lynetten
Gewicht ohne Lynette: zwischen Spitzen 8000 kg
Gewicht mit Lynette: zwischen Spitzen 11500 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: ca. 20 t
Raumbedarf ca.: m
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Drehdurchmesser über Support: . mm
Drehlänge: 5000 mm
Bohrtiefe: . mm
Digitalanzeige: Digitalanzeige
Spitzenhöhe: 600 mm
Umlauf über Bett: 1200 mm
Antrieb: 55 PS
Spindeldrehzahlen: 5-1000 U/min
Eilgang: quer 2000 mm/min
Zubehör:: Stahlhalter, Lynetten
Gewicht ohne Lynette: zwischen Spitzen 8000 kg
Gewicht mit Lynette: zwischen Spitzen 11500 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: ca. 20 t
Raumbedarf ca.: m
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
12
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18587Hersteller: FERROMATIK MILACRONYear of construction: 2001Clamping unitClamping force: 200 tonOpening stroke: 750 mmDistance between tie bars: 560 x 560 mmMould height min.: 300 mmOpening width: 1050 mmPlaten size (h x v): 830 x 830 mmInjection unitScrew diameter: 50 mmInjection volume: 441 cm³Shot weight: 395 gInjection pressure: 2268 barMeasurements and weightDimensions: 6,9 x 2,0 x 2,6 mMachine weight: 13000 kgFurther information:FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall ProductionThe FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.The K-TEC series is especially preferred for:• Thin-wall packaging products• Technical parts with fine surface details• Lid and container production• High-flow applications• High-speed serial production processesAdvantages of the nitrogen-supported system:• Extremely fast injection performance• More stable pressure control• Better reproduction of fine details• Improved filling of thin-wall products• Shorter cycle times• High process stabilityThe K-TEC series is also known for:• High repeatability• Sensitive mould protection• Low cycle times• Long-lasting mechanical construction• Suitability for heavy industrial operating conditionsThe machine was actively running in production until it was removed from operation and was working without problems until the very end.Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
Ref. no.: 18587
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 441 cm³
Shot weight: 395 g
Injection pressure: 2268 bar
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Further information:
FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production
The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.
One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.
The K-TEC series is especially preferred for:
• Thin-wall packaging products
• Technical parts with fine surface details
• Lid and container production
• High-flow applications
• High-speed serial production processes
Advantages of the nitrogen-supported system:
• Extremely fast injection performance
• More stable pressure control
• Better reproduction of fine details
• Improved filling of thin-wall products
• Shorter cycle times
• High process stability
The K-TEC series is also known for:
• High repeatability
• Sensitive mould protection
• Low cycle times
• Long-lasting mechanical construction
• Suitability for heavy industrial operating conditions
The machine was actively running in production until it was removed from operation and was working without problems until the very end.
Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: FERROMATIK MILACRON
Year of construction: 2001
Clamping unit
Clamping force: 200 ton
Opening stroke: 750 mm
Distance between tie bars: 560 x 560 mm
Mould height min.: 300 mm
Opening width: 1050 mm
Platen size (h x v): 830 x 830 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 441 cm³
Shot weight: 395 g
Injection pressure: 2268 bar
Measurements and weight
Dimensions: 6,9 x 2,0 x 2,6 m
Machine weight: 13000 kg
Further information:
FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production
The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.
One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications.
The K-TEC series is especially preferred for:
• Thin-wall packaging products
• Technical parts with fine surface details
• Lid and container production
• High-flow applications
• High-speed serial production processes
Advantages of the nitrogen-supported system:
• Extremely fast injection performance
• More stable pressure control
• Better reproduction of fine details
• Improved filling of thin-wall products
• Shorter cycle times
• High process stability
The K-TEC series is also known for:
• High repeatability
• Sensitive mould protection
• Low cycle times
• Long-lasting mechanical construction
• Suitability for heavy industrial operating conditions
The machine was actively running in production until it was removed from operation and was working without problems until the very end.
Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
13
Машины для обработки пластикаТермопластавтоматыМашины для литья пластмасс под давлением
Ref. no.: 18586Hersteller: KRAUSS MAFFEIYear of construction: 2011Clamping unitClamping force: 180 tonOpening stroke: 1050 mmDistance between tie bars: 560 × 510 mmMould height min.: 200 mmMould height max.: 600 mmPlaten size (h x v): 790 × 740 mmInjection unitScrew diameter: 50 mmInjection volume: 393 cm³Shot weight: 357 gInjection pressure: 1892 barMeasurements and weightDimensions: 6,07 x 1,92 x 2,01 mMachine weight: 6500 kgFurther information:👉Fully electric machine offering maximum precision, lowest energy consumption and highest process stabilityhis machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.Key features:* Solid and durable construction for long-term operation* High injection performance and process stability* Reliable KraussMaffei MC5 control system* Suitable for continuous industrial use* Good availability of spare partsThe machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Ref. no.: 18586
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.
Hersteller: KRAUSS MAFFEI
Year of construction: 2011
Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar
Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg
Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability
his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.
With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.
Key features:
* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts
The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.
Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.
The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.
Объявление было переведено автоматически, и, возможно, содержит некоторые ошибки перевода.