Swing over bed: 400 mm
Distance between centers: 1000 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Spindle speed steps: 12
Spindle revs: 50–2.240 rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 480 – 16
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 4 kW
Length: 2750 mm
Width: 1100 mm
Height: 1600 mm
Weight: 1540 kg

Round tube: 42 x 2,5 mm
Square tube: 40 x 1,2 mm
Rect. tube easy way: 30 x 40 x 1,7 mm
Rect. tube hard way: 40 x 30 x 1,3 mm
Max. bending radius: 255 mm
Min. bending radius: 22 mm
Max. bending angle: 180 °
Speed: 90 °/s
Motor: 5.5 kW
Hydraulic oil capacity: 120 l
Length: 4665 mm
Width: 800 mm
Height: 1160 mm
Weight: 1470 kg

Ref. no.: 18643
Manufacturer: ARBURG
Year of construction: 2008

Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 470 mm
Mould height min.: 250 mm
Opening width: 750 mm

Injection unit
Screw diameter: 35 mm
Injection volume: 154 cm³
Shot weight: 141 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 4,6 x 1,6 x 2,1 m
Machine weight: 4850 kg

Additional information & extras
Core pull: 1 pcs

Further information:
Communication card for ProSeS interface is available (OPC-UA).
Robot interface is available (EUROMAP 67).

he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.

The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards.

Key advantages of this series include:

* Robust and durable construction
* High process stability and repeatability
* Reliable ARBURG control system
* Good availability of spare parts
* Suitable for continuous industrial operation

The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market.

Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Tapping capacity: M12
Quill travel: 100 mm
Distance spindle - table: 155 - 415 mm
Distance spindle-base: 155 - 550 mm
Table: 340 x 280 mm
Column diameter: 82 mm
Length: 355 mm
Width: 705 mm
Height: 1065 mm
Weight: 170 kg

Druck: 100 t
Abkantlänge: 3000 mm
Ständerweite: 2550 mm
Hub: 150 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: . h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m

Drilling capacy mild steel: 18 mm
Taper: MK 2
Distance spindle - column: 240 mm
Revs: 30 - 3000 r.p.m.
Motor: 0.75 kW
Tapping capacity: M12
Feeds: manual mm/r
Column diameter: 82 mm
Distance spindle - table: 180 - 870 mm
Table: 340 x 280 mm
Quill travel: 100 mm
Length: 705 mm
Width: 355 mm
Height: 1825 mm
Weight: 195 kg

Ref. no.: 18565
Manufacturer: DEMAG
Year of construction: 2005

Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 x 500 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 750 x 750 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 323 cm³
Shot weight: 290 g
Injection pressure: 1973 bar

Measurements and weight
Dimensions: 5.45 x 1.63 x 2.1 m
Machine weight: 7500 kg

Robot
Producer: Wittmann
Type: W721-0231
Year: 2005

Further information:
The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control.
The machine is equipped with a Demag (Wittmann) DR721 linear robot.
Robot specifications:
Year of manufacture: 2005
X-axis: 550 mm
Y-axis: 1000 mm
Z-axis: 2000 mm
The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes.
In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies).
The machine was in running production and operating without problems until dismantling.

Saw frame: Double column
Band dimensions: 5200x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 460 mm
Cutting capacity 0° square: 460 mm
Cutting capacity 0° flat: 650x460 mm
Cutting capacity 45°: rund 380 mm, quadrat 380 mm, rechteck 380 x 460 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3100 mm
Width: 1000 mm
Height: 1800 mm
Weight: 1520 kg

Saw frame: Double column
Band dimensions: 5400x41x1,3 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 450 mm
Cutting capacity 0° square: 425 mm
Cutting capacity 0° flat: 560x425 mm
Cutting capacity 45°: rund 430 mm, quadrat 425 mm, rechteck 430 x 425 mm
Cutting capacity 60°: rund 320 mm, quadrat 290 mm, rechteck 425 x 260 mm
Working height: 690 mm
Hydraulic motor: 0.55 kW
Motor: 4 kW
Coolant pump motor: 0.12 kW
Length: 3090 mm
Width: 1200 mm
Height: 1940 mm
Weight: 1630 kg

Saw frame: Double column
Band dimensions: 4800x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 380 mm
Cutting capacity 0° square: 380 mm
Cutting capacity 0° flat: 520x380 mm
Cutting capacity 45°: rund 300 mm, quadrat 300 mm, rechteck 300 x 380 mm
Working height: 590 mm
Hydraulic motor: 0.55 kW
Motor: 3 kW
Coolant pump motor: 0.12 kW
Length: 2850 mm
Width: 930 mm
Height: 1660 mm
Weight: 1330 kg

Saw frame: Pivot frame
Band dimensions: 4160x34x1,1 mm
Band speed continous: 20-100 m/min
Cutting capacity 0° round: 320 mm
Cutting capacity 0° square: 320 mm
Cutting capacity 0° flat: 610x320 mm
Cutting capacity 30°: rund 260 mm, quadrat 225 mm, rechteck 280 x 200 mm
Cutting capacity 45°: rund 320 mm, quadrat 320 mm, rechteck 355 x 320 mm
Cutting capacity 60°: rund 320 mm, quadrat 320 mm, rechteck 510 x 320 mm
Working height: 740 mm
Hydraulic motor: 0.37 kW
Motor: 2.2 kW
Coolant pump motor: 0.12 kW
Cutting capacity 75°: rund 320 mm, quadrat 320 mm, rechteck 580 x 320 mm
Length: 2100 mm
Width: 1200 mm
Height: 1350 mm
Weight: 1150 kg

Punching power: 50 ton
Throat depth: 130 mm
Max. diameter at sheet thickness (mild steel): 27/13 mm
Max. number of strokes at 20 mm stroke: 23 1/min
Motor: 3 kW
Length: 1100 mm
Width: 900 mm
Height: 1550 mm
Weight: 355 kg

Coil weight: 4000 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm

Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 mm
Max. Coil inner diameter: 550
Max. coil width: 600 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm

Coil weight: 2500 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm

Coil weight: 1250 kg
Coil outer diameter: 1300 mm
Min. coil inner diameter: 450 - 550 mm
Max. coil width: 400 mm
Min. Coil width: 50
Min. coil width for version with pneumatic downholder: 80 mm

Cutting length: 1030 mm
Max. thickness - mild steel: 10 mm
Max. thickness - stainless steel: 6 mm
Strokes: 10 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 5000 mm
Motor power: 11 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1900 kg

Cutting length: 1030 mm
Max. thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 7.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1800 kg

Cutting length: 1030 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Strokes: 14 1/min
Cutting angle: 3 °
Number of downholders: 7 pcs.
Back gauge: 500 mm
Motor power: 5.5 kW
Oiltank: 100 l
Table height: 900 mm
Length: 1550 mm
Width: 1150 mm
Height: 1600 mm
Weight: 1700 kg

Cutting length: 6080 mm
Max. thickness - mild steel: 6 mm
Max. thickness - stainless steel: 4 mm
Gap in side frame: 350 mm
Strokes: 10 1/min
Cutting angle: 0.5 - 2 °
Number of downholders: 29 pcs.
Pressure of downholder: 20 to
Back gauge: 1000 mm
Back gauge speed: 200 mm/s
Motor power: 22 kW
Oiltank: 200 l
Support arms: 5 pcs.
Table height: 900 mm
Table width: 630 mm
Table length: 6370 mm
Length: 7300 mm
Width: 2150 mm
Total width with support arm und protection fence: 3400 mm
Height: 2750 mm
Weight: 25500 kg

Swing over bed: 500 mm
Distance between centers: 1500 mm
Centre height: 250 mm
Spindle bore: 80 mm
swing over cross slide: 300 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 80 M
Spindle speed steps: 21
Spindle revs: Array rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: Array Tpi
Module thread range: 0.125 - 30
DP thread range: Array
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3100 mm
Width: 1250 mm
Height: 1400 mm
Weight: 2820 kg

Ref. no.: 18591
Manufacturer: ARBURG
Year of construction: 2005

Clamping unit
Clamping force: 160 ton
Opening stroke: 450 mm
Distance between tie bars: 520 x 520 mm
Mould height min.: 250 mm
Mould height max.: 550 mm
Opening width: 700 mm
Platen size (h x v): 695 x 695 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 254 cm³
Shot weight: 232 g
Injection pressure: 1580 bar

Measurements and weight
Machine weight: 7100 kg
Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m

Further information:
The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes.

These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential.

Typical features of this series include:

* Fully electric drive for all main movements
* High energy efficiency compared to hydraulic machines
* Excellent injection and positioning accuracy
* Quiet and clean operation (also suitable for medical applications)
* Low maintenance requirements

The 520 A series with 160 tons clamping force offers a very good balance between performance and flexibility and is widely used in industries such as automotive supply, medical technology, and technical plastics.

ARBURG machines are well known for their durability and long service life, which makes this series highly attractive on the used machinery market.

Shaft diameter: 50
Rolls diameter: 155 mm
Driven rolls: 2
Motor power: 1.5 kW
Speed: 4 m/min
Flat steel vertical position (section / min. diameter): 60x10 mm / 500 mm, 40x10 mm / 400 mm
Flat steel horizontal position (section / min. diameter): 100x15 mm / 450 mm, 60 x 10 mm / 350 mm
Square bar (section / min. diameter): 35x35 mm / 900 mm, 20x20 mm / 300 mm
Round bar (section / min. diameter): Ø 35 mm / 600 mm, Ø 30 mm / 400 mm
Tube (section / min. diameter): Ø 70x2 mm / 1.000 mm, Ø 30x2 mm / 500 mm, 2"x2,9 mm / 1.000 mm, 1"x2,3 mm / 350 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 70x30x2 mm / 1.200 mm, 50x40x3 mm / 1.200 mm
Form tube square (section / min. diameter): 50x50x3 mm / 1.700 mm, 40x40x3 mm / 600 mm
Angle leg outside (Querschnitt / min. Durchmesser): 50x50x5 mm / 800 mm, 40x40x5 mm / 600 mm
Angle leg inside (section / min. diameter): 50x50x6 mm / 1.000 mm, 30x30x3 mm / 500 mm
Length: 1050 mm
Width: 750 mm
Height: 1450 mm
Weight: 390 kg

Spindeldurchmesser: 205 mm
x-Weg: 10000 mm
y-Weg: 2500 mm
w-Achse: 500 mm
Spindelweg: 1250 mm
Steuerung: Heidenhain
Typ: TNC 355
Spindelaufnahme ISO: 50
Getriebestufen: 2
Vorschub - selbsttätig: 0-3000 mm
Spindelantrieb: 37 kW
Gesamtleistungsbedarf: 70 kW
Maschinengewicht ca.: t
Raumbedarf ca.: 14,1x3,2x5,6 m

Ref. no.: 18586
Manufacturer: KRAUSS MAFFEI
Year of construction: 2011

Clamping unit
Clamping force: 180 ton
Opening stroke: 1050 mm
Distance between tie bars: 560 × 510 mm
Mould height min.: 200 mm
Mould height max.: 600 mm
Platen size (h x v): 790 × 740 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 393 cm³
Shot weight: 357 g
Injection pressure: 1892 bar

Measurements and weight
Dimensions: 6,07 x 1,92 x 2,01 m
Machine weight: 6500 kg

Further information:
👉
Fully electric machine offering maximum precision, lowest energy consumption and highest process stability

his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.

With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.

Key features:

* Solid and durable construction for long-term operation
* High injection performance and process stability
* Reliable KraussMaffei MC5 control system
* Suitable for continuous industrial use
* Good availability of spare parts

The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times.

Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production.

The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Scandibrew holding tank, Stainless, 1000L holding tank, jacketed, central bottom discharge,

Werkstückdurchmesser - max.: . mm
Werkstückdurchmesser - min.: . mm
Werkstücklänge: . mm
Einspanndurchmesser max.: 550 mm
Höhenverstellung: 800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Druck: 120 t
Abkantlänge: . mm
Ständerweite: 2550 mm
Hub: 200 mm
Gesamtleistungsbedarf: kW
Betriebsstunden: 2500 h
Maschinengewicht ca.: 8,3 t
Raumbedarf ca.: m

Drehdurchmesser: 890 mm
Drehlänge: 3000 mm
Drehdurchmesser über Support: 550 mm
Steuerung: Fagor 8055i ATC
Revolver: 8
Reitstock: MK 6
Drehdurchmesser in der Kröpfung: 1220 mm
Länge der Kröpfung: 450 mm
Spindeldurchlass: 106 mm
Drehzahl: 15-1480 U/min
Dreibackenfutter: 400 mm
Lünette: 300 mm

Drehdurchmesser: 475 mm
Drehlänge: 1500 mm
Steuerung: Fagor 8055T
Revolver: 8
Drehdurchmesser über Support: 240 mm
Drehdurchmesser in der Kröpfung: 710 mm
Länge der Kröpfung: 350 mm
Spindeldurchlass: 51 mm
Drehzahl: 100-4500 U/min
Leistung: 7/11 KW
Dreibackenfutter: 250 mm
Lünette: 230 mm

HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph

Soco T10 Case taper, Serial: 17395T10, 2017, Top and bottom case taper, side grip belts, max box with 500mm, max box height 550mm, 3Ph

Logopak 410 IIIF Labeller, Serial: LP10021552, Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,

Carton Sealer Case taper, Top case taper, side grip belts, max box width 450mm x max box height 550mm, mobile, 3Ph

x-Weg: 1700 mm
y-Weg: 1200 mm
z-Weg: 1600 mm
Tischfläche: 1700x1200 mm
Drehzahl: 35-1800 U/min
Vorschub: 20-1550 m/min
Spindel: 300 mm
Ausladung: 1200 mm

Swing over bed: 600 mm
Distance between centers: 2000 mm
Centre height: 300 mm
Spindle bore: 80 mm
swing over cross slide: 400 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 8
Spindle taper: 90 M
Spindle speed steps: 21
Spindle revs: 20 - 2000 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Number of threads: 64
Metric thread range: 0.5 - 120 mm
Inch thread range: 60 - 1/4 Tpi
Module thread range: 0.125 - 30
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 7.5 kW
Length: 3600 mm
Width: 1250 mm
Height: 1400 mm
Weight: 3110 kg

pressing capacity: 100 to
Stroke: 400 mm
Table: 800 x 500 mm mm
Daylight: 500 mm
Rapid speed: 110 mm/s
Working speed: 10 mm/s
Retraction speed: 160 mm/s
Motor: 11 kW
Working pressure: 250 bar
Length: 1900 mm
Width: 1700 mm
Height: 2930 mm
Weight: 5500 kg

Bending length: 1550 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 110 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1200 kg

Außenmaße 7,46 x 3,4 m, Die Räume bestehen aus Container für Umkleide, Container in der Mitte ist der Technik-Container mit Verteilung Strom, Durchlauferhitzer, Alle Wasseranschlüsse, Abwasser Bad, Spüle Teeküche, Der Raum mit der Teeküche besteht aus Boden und Decke, Wand vorne und hinten, sowie Wand rechts. Boden und Decke sind geteilt, so daß die auf 2,4 m LKW gefahren werden können. Alles Fertigbauweise, so daß die Räume an einem Tag wieder aufgebaut werden können.

Blade length: 197 mm
Sheet thickness (420 N/mm²): 4 mm
Sheet thickness (600 N/mm²): 2 mm
Strokes: 20 1/min
Angle: 90 °
Motor: 4 kW
Length: 890 mm
Width: 780 mm
Height: 1115 mm
Weight: 550 kg

Druck: . t
Vierkantmaß: 55 mm
Durchmesser: 63 mm
Flachmaterial: 170x20 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t

x-Weg: 2000 mm
y-Weg: 1500 mm
z-Weg: 1460 mm
Steuerung: Heidemhain
Typ: TNC 426 CB mm
Drehtisch: 1350x1550 mm
Drehzahl: 10-3000 U/min
Spindelaufnahme ISO: 50
Tischbelastung: 6000 kg
T-Nuten - Breite: 28h7 mm
T-Nuten - Abstand: 150 mm
Anzahl der T-Nuten: 150
Vorschub: 10-3000 mm/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 24 t
Raumbedarf ca.: m

Spindeldurchmesser: 130 mm
x-Weg: 3500 mm
y-Weg: 2000 mm
z-Weg: 1250 mm
w-Achse: 800 mm
b-Achse: 360 °
Spindeldrehzahlen: 12,5-900 U/min
Steuerung: Heidenhain
Typ: 155
Tischfläche: 1800x1600 mm
Tischbelastung: 12000 kg
Spindelaufnahme ISO: 50
T-Nutenbreite: 22 mm
T-Nuten - Abstand: 160 mm
Vorschub: 1-6000 mm/min
Tisch drehbar: 360 °
Gesamtleistungsbedarf: 80 KVA
Maschinengewicht ca.: 36 t
Raumbedarf ca.: 7,7x7,2x4,9 m

Aufnahme: .
Gewicht: . kg
Material: .

Drehdurchmesser über Bett: 520 mm
Drehdurchmesser über Support: 340 mm
Drehlänge: 1000 mm
Spindelbohrung: 55 mm
Planscheibe: 400 mm
Drehzahl: 33,5-1600 U/min
Digitalanzeige: Haidenhain
Bettbreite: 340 mm
Dreibackenfutter: 250 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Drehdurchmesser über Bett: 460 mm
Drehdurchmesser über Support: 290 mm
Drehlänge: 1000 mm
Spindelbohrung: 55 mm
Planscheibe: 400 mm
Drehzahl: 50-1250 U/min
Digitalanzeige: Haidenhain
Bettbreite: 340 mm
Dreibackenfutter: 250 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 5000 mm
Umlaufdurchmesser: 6100 mm
Drehhöhe: 2300 mm
Steuerung: Siemens
Typ: Sinumerik840D mm
Antrieb: 55 kW
Tischbelastung: 55000 kg
Support: 2 Drehsupporte
Stößelabmessungen: 340x340 mm
Drehzahl: 280 U/min

Planscheibendurchmesser: 4000 mm
Umlaufdurchmesser: 4300 mm
Drehhöhe: 1750 mm
Supportverstellung: 1000 mm
Tischbelastung: 18 t
Drehzahl: 1-92 U/min
Steuerung: Siemens
Typ: 840 D mm
Support: 2
Stößelabmessungen: 250x250 mm
Vorschub: 1-4000 mm/min
Hauptgetriebemotor: 55 kW
Gesamtleistungsbedarf: 85 KVA
Maschinengewicht ca.: 64 t
Raumbedarf ca.: 8x5,8x8 m

X: 400 mm
Y: 500 mm
Z: 450 mm
Table size: 580 x 560 mm
Speed range: 9.000 / 16.000 rpm
Tool changer: 20 -station
Tool holder: HSK-A 63
Chip conveyor: yes
Tool diameter: 80 mm
Max. length tool: 250 mm
Max. weight tool: 6 kg
Speed range main spindle: 16000 rpm
Feed force x/y axis: 3500 N
Rapid traverse X/Y axis: 35 mtr/min
Rapid traverse Z axis: 30 mtr/min
Feed range z axis: 4200 N
Control: Heidenhain TNC 426
Total power: 25 kW
Weight of machine: 5500 kg
Space requirement (W x D x H): 3,5 x 1,4 x 2,6 m

Fritsch Rollfix Pastry brake, Pastry brake, total length 3000mm, belt with 600mm, roller width 630mm, with safety cage, mobile, 1Ph