Hesta blow moulding machine in good condition
HESTA ST 502 extrusion blow molding machine
clamping force : 150 KN
Screw diameter: 50 mm / 22D
2 x 125mm
Speed: 300mm/sec
Shape thickness: 230-280mm
Maximum PE weight: 400 g
Machine weight: 3200 KG

BLOW MOLDING MACHINE BILLION P300
3 liters
Clamping force: 2 x 3.3 T
Closing stroke: 2 x 150 mm
Min mold thickness: 150mm
Platen Dimensions: Horizontal: 310mm x Vertical: 310mm
Screw diameter: 50mm
Screw stroke: 170 mm
Capacity per shot: 333 cm3
Pressure on the material: 1000 kg/cm2
L/D screw ratio: 15
Many spare parts supplied with the machine + several control cabinets + 1 set of molds

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 200
This injection blow molding machine PROCREA REV 200 can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 4 liters and weight of 5 gr. at 200 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 200 is very simple thanks to the automatic extraction system applied to the revolver.

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 150
This PROCREA REV 150 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 1500 cc and weight of 5 gr. at 150 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 150 is very simple thanks to the automatic extraction system applied to the revolver.

2 head
Entraxe :100 mm
Volume max of the bottle : 0,5 l
Number of post: 1
Extrusion continuous
Nombre d'extrudeuses: 1
Screw diameter : 60 mm
Rapport L/D: 20
Parison thickness control : PROFILOG 32 point
Heating knife
Voltage : 380 V Triphase
Frequency : 50 Hz

BLOW MOULDING MACHINE KAUTEX KBS2 – 61/60


Year 1998
Tonnage: 60 tons
Tray dimensions: 700 x 1000 mm
Max mold height: 1250 mm
Max mold width: 800 mm
Minimum mold thickness: 620 mm
Max mold opening stroke: 675 mm
Screw diameter: 100 mm
L/D ratio: 20
Maximum extrudable weight in PE: 9000 Gr
Maximum injectable volume: 12 liters
Number of parison regulation points: 64
Die Min/max diameter: 100/230

UNILOM MILACRON Blow moulding machine

Type BW20
Year 2009

Equipped with MOOG parison thickness control and accumulation head
Screw diameter: 90 mm
WK130 torpedo extrusion head with pre-accumulator
There is a stripping station and a robot
Sold with 1 mold of 20 liter water bottles and 3 other molds
This machine can produce 120 cans per hour

Souflleuse MOB 20 litres

Type: MOB 20 liters
Year: 1990 redone in 2000
Passage between column: 425 x 400 mm
Minimum thickness: 210 mm
Opening stroke: 660 mm
Screw diameter: 80 mm – L/D: 25 mm
Parison: 14 points
1 core

Brand: BEMACO
Model: BA 200
Year: 1994
Clamp force: 800
Type: 200 ltr, accumulator head technology
Extruder: 130 mm, 24 L/D
Head: 20 ltr
Min/max Die diameter 120 - 400
Mould platens: 1320 x 800(maximum daylight 1600)
Bottom blow-pin: included
Overall dimensions (length
x width x height 8000 x 4000 x 6500
Control Siemens SIMATIC OP 396
Programmer
Siemens S5 100U/103CPU 32
points