Ryobi 524 HXX offset press

COUNTER (MIO): 98
YEAR: 2003
SIZE (CM): 37,5 X 52
RYOBIMATIC DAMPENING
SEMI AUTOPLATE
AUTOMATIC BLANKET WASHER DEVICE
AUTOMATIC ROLLER WASHER DEVICE
POWDER SPRAYER
AVAILIBILITY: IMMEDIATELY
CLEANED

Polar L 450 W-1 Lift

Plateau : 84x62 cm

Cauhe II

Year 2004
Format: 82x112 cm
Weight 4400 kg
Heated Plate

Simplacutter VI

Max dimensions: 200x 120 cm

Polar Mohr 92 X Cutting Line

Complete cutting line consisting of lift, vibrating table with air removal, and cutting machine, in good condition and available in February 2024.

Brand and model: Polar Mohr 92 X
Year of manufacture: 2010
Cutting width: 92 cm (approximately 36 inches)
Cutting length: 92 cm
Cutting precision: High precision for accurate cuts.
Cutting material: Suitable for cutting paper, cardboard, and similar materials.
Comprising:

Polar 92 X (2010)
Polar RA 2 jogger with air removal (2010)
Polar lift

Stock A134R-R5PS6M / 1650 x 2050P Laming machine

Sheet to board laminating machine for producing displays and packing material

Horizon AC 8000 S collating machine

* collating stations
* suctions feeder
* jogger with cris cross

Sallmetal Laminating machine

S1050

Max Laminating size: 105 cm

Polar Lw 450 lift

Format: 50x70 cm
Fotocel height detection

Heidelberg KSB Cilinder

Format 40x57 cm

Polar Mohr 78 ED paper guillotine

Technical data:
Cutting width 780mm
Stack height 120mm
Color LCD display
Power supply 400V
Weight 1400 kg
Side tables
Chrome table surface

Spare knife, cutting sticks, tapping block, maintenance tools.

RYOBI 524 HXX
COUNTER (MIO): 98
YEAR: 2003
SIZE (CM): 37,5 X 52
RYOBIMATIC DAMPENING
SEMI AUTOPLATE
AUTOMATIC BLANKET WASHER DEVICE
AUTOMATIC ROLLER WASHER DEVICE
POWDER SPRAYER
AVAILIBILITY: IMMEDIATELY

Ryobi 524 HXX

Year 2004

Heidelberg GTP Hot Foil

size 34×46
with Hotfoil

Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames

Wook il WTNS S1700 die cutting machine

Year of construction: 2000
Max. pressure 350 TON



Maximum size: 1200×1700mm

Minimum size: 600 x 850 mm

Heidelberg GTP orignal hotfoil platen

Ideal 7228-95

Year 2003
Photcell safety
Spare knife

Sheetfed offset machine

2007 Ryobi 524-GX – 4 color- 36 x 52 cm
Ryobimatic
Semi-APC,
PCS-H 4 console

Hans Wahli stream feeder

complete with delivery belt

Polar RAB 4 Jogger

Year: 1998
With automatic side flaps and air removing roller

Polar 78 ES

Year 1996
Chrome air table
Complete with tools and spare knife

Nebiolo Athena die Cutting

size 60×80

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Heidelberg GTP hot foil platen.

Serial GTP 63613
Complete with big hot foil chase

Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,

Wookil WTNS 1700 semi automatic die cutting machine

Year 2000
Max size 1200x 1700 mm
Min size: 600 x 850 mm
Max pressure 350 tons

Polar 92 EMC monitor

Chrome table with air
2 x 1m2 resopal side tables with air.

Polar 92 EMC monitor.

Snijbreedte: 92 cm
Chrome air table
Complete with tools and spare knife

Screenprinting machine 3/4 automat

Emm 3/4 automatic screenprinting machine Type 444 DVA.

With Trumax Hot, cold and UV drying unit.
and Trumax stacker

Viportech Executive

Vipromat executive semiautomatic ( 1189 x 841 mm)

2 x Hohner 48/5 S eyelet loop stitching heads

I'm good condition.
Price pro pice

Powered Feed Roller

Cutting Shear: 3 knife units
Creasing unit: 8 creasing units

GTS Countmaster 1053

With stoke inserter

230 volt
Max stack height: 140 mm
Max paper size: 350 x 600 mm
Min paper size: 45

Ascon
Model: 1000
Year 2002

Automatic rotating

Afmeting 72 x 115 cm
Capacity 1000 kg

Polar 155 EMC 1 with microcut system

Year 1980
Complete with spare knife
Cutting size 155 cm

Polar 145 EL

With Gergeck System six computer installed
Cutting width 145 cm

Complete with spare knife

Workingwidth 1500 mm

Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct

Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000

Automatic closing window

Hardened die plate

Pileturner

Ascon
Model 1000

Size 800 x 1100 mm
Capacity 1000 kg

Polar 76 EM Programmsteuerung
- Air table
- 2 knife - Cutting Size: 76 cm
- pile height max: 11 cm
- Weight: 1040 Kg

Heidelberg KSBA cilinder

Max size: 46x 58.5 cm
Die cutting cilinder with inking unit

Heidelberg PM 52-2

Year 2006
Baldwin dampening
Rubberdoek wasinrichting
Semi automatic plate change
Impressions: ± 20mil

Paperplast international Dry 40

Format: 76x102

Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater

Polar 155 CE

Gergeck system six backgauge control
Pilz control unit
PIlz 2 hand control
Pilz photocell safety
Main motor: frequency driven.

Complete with spare knife

Theisen en Bonitz Sprint HP 320

20 stations High pile collating machine
Complete with pumps

Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm

Polar 76 em

Size: 76 cm
With knife change tools and spare knife

Morgana Digifold Pro

Folding creasing machine

Heidelberg Stahfolder T52-4

Year: 2003
Tremat feeder
Without pumps

Card board cutter Schimanek Model 10-110

Year: 1997s
Cutting size: 110 cm
Table cast Iron