Bitte warten...

12
Atlas Copco ZT30 Air compressor, Serial: AIF065086, 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank
Atlas Copco ZT30 Air compressor, Serial: AIF065086, 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank
2
Teknomek Low level bench, Stainless, low level bench with 16 pair shoe rack, 2000mm x 370mm
Teknomek Low level bench, Stainless, low level bench with 16 pair shoe rack, 2000mm x 370mm
5
NahrungsmittelmaschinenFleischverarbeitungsmaschinen

NNP Caged trolleys, Stainless, caged trolleys, various sizes, mobile
NNP Caged trolleys, Stainless, caged trolleys, various sizes, mobile
3
NahrungsmittelmaschinenFleischverarbeitungsmaschinen

Teknomek low level bench, Stainless, low level bench, 2000mm x 350mm
Teknomek low level bench, Stainless, low level bench, 2000mm x 350mm
4
NahrungsmittelmaschinenFleischverarbeitungsmaschinen

NNP boot racks, stainless, wall mounted boot racks
NNP boot racks, stainless, wall mounted boot racks
6
NahrungsmittelmaschinenFleischverarbeitungsmaschinen

NNP Stainless trolleys, 15x stainless mobile trolleys, various sizes
NNP Stainless trolleys, 15x stainless mobile trolleys, various sizes
12
Allfill SHA15 Auger filler , Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph
Allfill SHA15 Auger filler , Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph
7
NahrungsmittelmaschinenObst- und GemüsemaschinenVakuumprozessanlagen

Injectstar Vacuum tumbler, Stainless, 1200L tumbler, variable speed, timer controls, with vacuum, 3Ph
Injectstar Vacuum tumbler, Stainless, 1200L tumbler, variable speed, timer controls, with vacuum, 3Ph
7
Townsend SK11-350 Derinding skinner, Serial: 10460, Stainless, membrane skinner, with 500mm tooth roller skin membrane, 0.75Kw, mobile, 3Ph
Townsend SK11-350 Derinding skinner, Serial: 10460, Stainless, membrane skinner, with 500mm tooth roller skin membrane, 0.75Kw, mobile, 3Ph
4
Nederman CARZ FL200 Explosion isolation flap valve, Serial: S12044, 2017, Explosion isolation flap valve, see plate for spec
Nederman CARZ FL200 Explosion isolation flap valve, Serial: S12044, 2017, Explosion isolation flap valve, see plate for spec
6
Fans and Blowers 30-2 QPB Centrifugal fan, Serial: AV897, Centrifugal fan with direct drive, fan size 302, fan speed 2900 RPM, flanged inlet, 7.5Kw drive, 3Ph
Fans and Blowers 30-2 QPB Centrifugal fan, Serial: AV897, Centrifugal fan with direct drive, fan size 302, fan speed 2900 RPM, flanged inlet, 7.5Kw drive, 3Ph
5
Arnott 90 degree conveyor, 2019, Stainless, 90 degree, slat chain conveyor, variable speed, with side guides, belt width 250mm, length 2400mm to the bend and 1000mm after bend, mobile, 3Ph
Arnott 90 degree conveyor, 2019, Stainless, 90 degree, slat chain conveyor, variable speed, with side guides, belt width 250mm, length 2400mm to the bend and 1000mm after bend, mobile, 3Ph
13
Riggs 1000 Three head filler, Serial: TT1737, 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings
Riggs 1000 Three head filler, Serial: TT1737, 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings
4
NahrungsmittelmaschinenFleischverarbeitungsmaschinen

NNP Bottle rinser, Stainless, pneumatic bottle rinser, by blowing air into glass bottles, foot operated
NNP Bottle rinser, Stainless, pneumatic bottle rinser, by blowing air into glass bottles, foot operated
8
NahrungsmittelmaschinenFleischverarbeitungsmaschinen

MEP AVT400 Capping machine, Serial: 271221, 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph
MEP AVT400 Capping machine, Serial: 271221, 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph
6
Letina PZP1100 Variable capacity tank, Serial: 146720, 2020, Stainless, Variable capacity tank, max capacity 1100L, with floating lid and inflatable gasket achieves an air tight seal
Letina PZP1100 Variable capacity tank, Serial: 146720, 2020, Stainless, Variable capacity tank, max capacity 1100L, with floating lid and inflatable gasket achieves an air tight seal
10
Adpak Uniblock 712AD Shrinkwrapper and heat tunnel, Automatic shrinkwrapper and heat tunnel, sealing bar 750mm, with hold down, tunnel aperture 600mm x 450mm, mobile, 3Ph
Adpak Uniblock 712AD Shrinkwrapper and heat tunnel, Automatic shrinkwrapper and heat tunnel, sealing bar 750mm, with hold down, tunnel aperture 600mm x 450mm, mobile, 3Ph
5
STS DTP04 Drum barrel mover, Drum and barrel mover with side shift, unique over pallet lifter allows you to load and unload an entire pallet of drums from just one side, mobile
STS DTP04 Drum barrel mover, Drum and barrel mover with side shift, unique over pallet lifter allows you to load and unload an entire pallet of drums from just one side, mobile
5
STS STP01 Power clamp drum tipper, Power clamp drum tipper can lift and tip drums and barrels from 50L to 220L, the unit is pneumatic-hydraulic powered, 350Kgs SWL, mobile
STS STP01 Power clamp drum tipper, Power clamp drum tipper can lift and tip drums and barrels from 50L to 220L, the unit is pneumatic-hydraulic powered, 350Kgs SWL, mobile
5
STS DTP05 Corner drum lifting trolley, Corner drum lifting trolley, 350Kgs SWL, the universal drum catch lets you connect the unit to a wide variety of drums, height adjustable drum gripper, mobile, 2 in stock
STS DTP05 Corner drum lifting trolley, Corner drum lifting trolley, 350Kgs SWL, the universal drum catch lets you connect the unit to a wide variety of drums, height adjustable drum gripper, mobile, 2 in stock
7
Alfa Laval LKH-UP70 Centrifugal pump, Year 2023, Serial: 298034, Stainless centrifugal pump, 22Kw motor, 3Ph
Alfa Laval LKH-UP70 Centrifugal pump, Year 2023, Serial: 298034, Stainless centrifugal pump, 22Kw motor, 3Ph
8
Alfa Laval SX4-063H Lobe pump, Serial: 349019, Stainless lobe pump, mounted on stainless frame, variable speed control, 50mm inlet and outlet pipe, 3Kw motor, mobile, 3Ph
Alfa Laval SX4-063H Lobe pump, Serial: 349019, Stainless lobe pump, mounted on stainless frame, variable speed control, 50mm inlet and outlet pipe, 3Kw motor, mobile, 3Ph
5
Arnott Stainless conveyor, 2019, Stainless, slat band conveyor, belt dimensions 1000mm x 250mm, mobile
Arnott Stainless conveyor, 2019, Stainless, slat band conveyor, belt dimensions 1000mm x 250mm, mobile
6
Aro Double diaphragm pump, Air operated double diaphragm pumps, mounted on stainless mobile stand
Aro Double diaphragm pump, Air operated double diaphragm pumps, mounted on stainless mobile stand
4
Aro Double diaphragm pump, Air operated double diaphragm pumps, mounted on stainless stand
Aro Double diaphragm pump, Air operated double diaphragm pumps, mounted on stainless stand
5
Tapflo TX225 STT Double diaphragm pump, The Tapflo sanitary series air operated double diaphram pumps, ideal for food, beverage, pharma and cosmetic industries, mounted on stainless frames, 5 in stock
Tapflo TX225 STT Double diaphragm pump, The Tapflo sanitary series air operated double diaphram pumps, ideal for food, beverage, pharma and cosmetic industries, mounted on stainless frames, 5 in stock
6
STS DTP05 Corner drum lifting trolley, Corner drum lifting trolley, 350Kgs SWL, the universal drum catch lets you connect the unit to a wide variety of drums, height adjustable drum gripper, mobile, 5 in stock
STS DTP05 Corner drum lifting trolley, Corner drum lifting trolley, 350Kgs SWL, the universal drum catch lets you connect the unit to a wide variety of drums, height adjustable drum gripper, mobile, 5 in stock
5
Woods 56JM/20/4/6/10-36 flow extract fan, Year 2021, 560mm fan diameter, 1420 rev/min, see plate for spec, 5 in stock, 3Ph
Woods 56JM/20/4/6/10-36 flow extract fan, Year 2021, 560mm fan diameter, 1420 rev/min, see plate for spec, 5 in stock, 3Ph
3
Grundfos CHI2-30 A-W-G Pump, 2010, 2900RPM, 2.5M3/H, rated head 19M, 19mm impeller, max operating pressure 10bar, 3Ph (two in stock)
Grundfos CHI2-30 A-W-G Pump, 2010, 2900RPM, 2.5M3/H, rated head 19M, 19mm impeller, max operating pressure 10bar, 3Ph (two in stock)
3
NahrungsmittelmaschinenFleischverarbeitungsmaschinen

Hache 1720E Turbidimeter, Hach 1720E Continuous-reading Nephelometric Low Range Process Turbidimeter, Continuously flowing sample flows through the patented bubble removal system, which vents entrained air from the sample stream and eliminates the most significant interference in low level turbidity measurement. The 1720E Turbidimeter is not affected by variations in flow and pressure, The 1720E Turbidimeter uses the sc200 Controller to receive data from up to two sensors. A built-in data logger collects turbidity measurement at user selectable intervals (1-15 minutes), along with calibration and verification points, alarm history, and instrument setup changes for 6 months.
Hache 1720E Turbidimeter, Hach 1720E Continuous-reading Nephelometric Low Range Process Turbidimeter, Continuously flowing sample flows through the patented bubble removal system, which vents entrained air from the sample stream and eliminates the most significant interference in low level turbidity measurement. The 1720E Turbidimeter is not affected by variations in flow and pressure, The 1720E Turbidimeter uses the sc200 Controller to receive data from up to two sensors. A built-in data logger collects turbidity measurement at user selectable intervals (1-15 minutes), along with calibration and verification points, alarm history, and instrument setup changes for 6 months.
6
Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals
Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals
10
Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available
Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available
8
Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph
Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph
8
Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec
Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec
5
Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,
Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,
8
NahrungsmittelmaschinenFleischverarbeitungsmaschinen

AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes
AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes
1
Metallbearbeitungs- und WerkzeugmaschinenBlechbearbeitungsmaschinenProfilstahlscheren
Stanzkraft: 110 to Ausladung: 610 mm Anzahl der Stationen: 5 Max. Durchmesser bei Blechstärke (Baustahl): 40/20 bzw. 28/28 mm Hub: 80 mm Hubzahl: 28 1/min Flachstahl: 600x15 / 400x20 mm Winkelstahl: 152x152x13 mm Rund-/Quadratstahl: 50 mm Ausklinker: 13x52x90 mm Motor: 9 kW Länge: 2690 mm Breite: 1400 mm Höhe: 2200 mm Gewicht: 3300 kg
Stanzkraft: 110 to
Ausladung: 610 mm
Anzahl der Stationen: 5
Max. Durchmesser bei Blechstärke (Baustahl): 40/20 bzw. 28/28 mm
Hub: 80 mm
Hubzahl: 28 1/min
Flachstahl: 600x15 / 400x20 mm
Winkelstahl: 152x152x13 mm
Rund-/Quadratstahl: 50 mm
Ausklinker: 13x52x90 mm
Motor: 9 kW
Länge: 2690 mm
Breite: 1400 mm
Höhe: 2200 mm
Gewicht: 3300 kg
5
Biegelänge: 1550 mm Max. Biegekapazität - Baustahl: 9 mm Max. Blechstärke ohne Anbiegung bei D=5x Oberwalzendm. - Baustahl: 9 mm Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwalzendm. - Baustahl: 7 mm Max. Blechstärke mit Anbiegung bei D=5x Oberwalzendm. - Baustahl: 7 mm Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalzendm. - Baustahl: 5 mm Oberwalzendurchmesser: 180 mm Unterwalzendurchmesser: 180 mm Seitenwalzendurchmesser: 150 mm Rollgeschwindigkeit: 1,5 / 6 m/min Motorleistung: 5 kW Länge: 3900 mm Breite: 1150 mm Höhe: 1250 mm Gewicht: 3250 kg
Biegelänge: 1550 mm
Max. Biegekapazität - Baustahl: 9 mm
Max. Blechstärke ohne Anbiegung bei D=5x Oberwalzendm. - Baustahl: 9 mm
Max. Blechstärke ohne Anbiegung bei D=1,5x Oberwalzendm. - Baustahl: 7 mm
Max. Blechstärke mit Anbiegung bei D=5x Oberwalzendm. - Baustahl: 7 mm
Max. Blechstärke mit Anbiegung bei D=1,5x Oberwalzendm. - Baustahl: 5 mm
Oberwalzendurchmesser: 180 mm
Unterwalzendurchmesser: 180 mm
Seitenwalzendurchmesser: 150 mm
Rollgeschwindigkeit: 1,5 / 6 m/min
Motorleistung: 5 kW
Länge: 3900 mm
Breite: 1150 mm
Höhe: 1250 mm
Gewicht: 3250 kg
9
Metallbearbeitungs- und WerkzeugmaschinenBlechbearbeitungsmaschinenSchwenkbiegemaschinen
Biegelänge: 4010 mm Biegeleistung Stahl 400 N/mm²: 1.25 mm Biegeleistung Alu 190 N/mm²: 2 mm Schnittleistung elektrische Schere: 1.25 mm Ständer-Spannarmeinheiten: 4 Anzahl der angetriebenen Biegeelemente: 4 Einlegetiefe: 1000 mm Öffnungsweite: 190 mm Arbeitshöhe: 835 mm Motor: 2.2 kW Länge mit elektrischer Schere: 5200 mm Breite: 1300 mm Höhe: 1900 mm Gewicht: 1550 kg
Biegelänge: 4010 mm
Biegeleistung Stahl 400 N/mm²: 1.25 mm
Biegeleistung Alu 190 N/mm²: 2 mm
Schnittleistung elektrische Schere: 1.25 mm
Ständer-Spannarmeinheiten: 4
Anzahl der angetriebenen Biegeelemente: 4
Einlegetiefe: 1000 mm
Öffnungsweite: 190 mm
Arbeitshöhe: 835 mm
Motor: 2.2 kW
Länge mit elektrischer Schere: 5200 mm
Breite: 1300 mm
Höhe: 1900 mm
Gewicht: 1550 kg
5
Sägerahmen: Schwenkrahmen Sägebandabmessungen: 4160x34x1,1 mm Bandgeschwindigkeit stufenlos: 15 - 120 m/min Schnittleistung 0° rund: 320 mm Schnittleistung 0° quadratisch: 320 mm Schnittleistung 0° flach: 450x320 mm Schnittleistung 30°: rund 320 mm, quadrat 320 mm, rechteck 380x320 mm Schnittleistung 45°: rund 320 mm, quadrat 320 mm, rechteck 330x320 mm Schnittleistung - 30°: rund 320 mm, quadrat 320 mm, rechteck 380x320 mm Schnittleistung - 45°: rund 320 mm, quadrat 300 mm, rechteck 340x320 mm Schnittleistung - 60°: rund 230 mm, quadrat 220 mm, rechteck 230x220 mm Arbeitshöhe: 860 mm Hydraulikmotor: 0.37 kW Motor: 2.2 kW Kühlmittelpumpenmotor: 0.12 kW Länge: 2230 mm Breite: 1150 mm Höhe: 2140 mm Gewicht: 1030 kg
Sägerahmen: Schwenkrahmen
Sägebandabmessungen: 4160x34x1,1 mm
Bandgeschwindigkeit stufenlos: 15 - 120 m/min
Schnittleistung 0° rund: 320 mm
Schnittleistung 0° quadratisch: 320 mm
Schnittleistung 0° flach: 450x320 mm
Schnittleistung 30°: rund 320 mm, quadrat 320 mm, rechteck 380x320 mm
Schnittleistung 45°: rund 320 mm, quadrat 320 mm, rechteck 330x320 mm
Schnittleistung - 30°: rund 320 mm, quadrat 320 mm, rechteck 380x320 mm
Schnittleistung - 45°: rund 320 mm, quadrat 300 mm, rechteck 340x320 mm
Schnittleistung - 60°: rund 230 mm, quadrat 220 mm, rechteck 230x220 mm
Arbeitshöhe: 860 mm
Hydraulikmotor: 0.37 kW
Motor: 2.2 kW
Kühlmittelpumpenmotor: 0.12 kW
Länge: 2230 mm
Breite: 1150 mm
Höhe: 2140 mm
Gewicht: 1030 kg
2
Länge: 835 mm
Länge: 835 mm
1
DruckmaschinenWeiterverarbeitungsmaschinenZubehör und Ersatzteile

2
Sägerahmen: Doppelsäulenführung Sägebandabmessungen: 5750 x 41 x 1,3 mm Bandgeschwindigkeit stufenlos: 20 - 120 m/min Schnittleistung 0° rund: 420 mm Schnittleistung 0° quadratisch: 420 mm Schnittleistung 0° flach: 420 x 420 mm Arbeitshöhe: 805 mm Hydraulikmotor: 1.1 kW Motor: 5.5 kW Servomotor: 1 kW Kühlmittelpumpenmotor: 0.12 kW Länge: 2860 mm Breite: 1980 mm Höhe: 2100 mm Gewicht: 3700 kg
Sägerahmen: Doppelsäulenführung
Sägebandabmessungen: 5750 x 41 x 1,3 mm
Bandgeschwindigkeit stufenlos: 20 - 120 m/min
Schnittleistung 0° rund: 420 mm
Schnittleistung 0° quadratisch: 420 mm
Schnittleistung 0° flach: 420 x 420 mm
Arbeitshöhe: 805 mm
Hydraulikmotor: 1.1 kW
Motor: 5.5 kW
Servomotor: 1 kW
Kühlmittelpumpenmotor: 0.12 kW
Länge: 2860 mm
Breite: 1980 mm
Höhe: 2100 mm
Gewicht: 3700 kg
2
Metallbearbeitungs- und WerkzeugmaschinenBlechbearbeitungsmaschinenSickenmaschinen
Max. Blechstärke - Baustahl: 0.8 mm Ausladung: 80 mm Wellenlänge: 110 nm Werkzeuganzahl: 7 Stk. Walzendurchmesser: 52 mm Länge: 380 mm Breite: 180 mm Höhe: 380 mm Gewicht: 30 kg
Max. Blechstärke - Baustahl: 0.8 mm
Ausladung: 80 mm
Wellenlänge: 110 nm
Werkzeuganzahl: 7 Stk.
Walzendurchmesser: 52 mm
Länge: 380 mm
Breite: 180 mm
Höhe: 380 mm
Gewicht: 30 kg
3
Cauhe VA (1450 x 1850 mm) Die Cutter / Cauhe VA Heavy-Duty Large Format Die Cutter Very neat machine, rarely used. Max format: (1450 x 1850 mm) Model: VA Year: 2008 Available immediately!
Cauhe VA (1450 x 1850 mm) Die Cutter / Cauhe VA Heavy-Duty Large Format Die Cutter

Very neat machine, rarely used.

Max format: (1450 x 1850 mm)
Model: VA
Year: 2008

Available immediately!
7
Metallbearbeitungs- und WerkzeugmaschinenBlechbearbeitungsmaschinenSchwenkbiegemaschinen
Biegelänge: 2040 mm Blechstärke (420 N/mm²): 3 mm Max. Blechstärke - Edelstahl: 2 mm Max. Blechstärke - Aluminium: 4.5 mm Antrieb: Motorisch Biegewangenmotor: 1.5 kW Oberwangenmotor: 1.1 kW Hinteranschlag: 750 mm Öffnungsweite: 140 mm Biegegeschwindigkeit: 50 °/sek Länge: 3060 mm Breite: 1650 mm Höhe: 1500 mm Gewicht: 2730 kg
Biegelänge: 2040 mm
Blechstärke (420 N/mm²): 3 mm
Max. Blechstärke - Edelstahl: 2 mm
Max. Blechstärke - Aluminium: 4.5 mm
Antrieb: Motorisch
Biegewangenmotor: 1.5 kW
Oberwangenmotor: 1.1 kW
Hinteranschlag: 750 mm
Öffnungsweite: 140 mm
Biegegeschwindigkeit: 50 °/sek
Länge: 3060 mm
Breite: 1650 mm
Höhe: 1500 mm
Gewicht: 2730 kg
6
Metallbearbeitungs- und WerkzeugmaschinenSonstige

Werkbank mit schraubstock / Gedore 2Meter x0,7 meter 2xschubladen 2x flügeltüren
Werkbank mit schraubstock / Gedore

2Meter x0,7 meter

2xschubladen

2x flügeltüren
11
Metallbearbeitungs- und WerkzeugmaschinenSchleifmaschinenGleitschleifmaschinen

Walther CN - 550 -PN Gleitschleifanlage u. Rösler Z300 Turbo Floc Zentrifuge -Walther Trowal CN-550-PN -1460 U/min -550 Liter Fassungsvermögen -Motor 3,5 KW -Pneumatischer Schallschutzdeckel -Schaltschrank -Schmutzwasser / Ablasseinrichtung -Compound - Gleitsteine 2xBoxen -Dokumentation -Abmaße: LxBxH 2x1,8x1,8 Meter / Gewicht 1500Kg -Rösler - Z300 Turbo-Floc / Zentrifuge -Baujahr 1996 -Rotordrehzahl 3160 U/min -Leistung 4 KW -Max. Durchsatzleistung 800 / Liter/ Stunde -Dokumentation -Abmaße LxBxH 1,7x1x1,6 Meter / Gewicht 400Kg Bvticjyuvm
Walther CN - 550 -PN Gleitschleifanlage u. Rösler Z300 Turbo Floc Zentrifuge

-Walther Trowal CN-550-PN
-1460 U/min
-550 Liter Fassungsvermögen
-Motor 3,5 KW
-Pneumatischer Schallschutzdeckel
-Schaltschrank
-Schmutzwasser / Ablasseinrichtung
-Compound - Gleitsteine 2xBoxen
-Dokumentation
-Abmaße: LxBxH 2x1,8x1,8 Meter / Gewicht 1500Kg

-Rösler - Z300 Turbo-Floc / Zentrifuge
-Baujahr 1996
-Rotordrehzahl 3160 U/min
-Leistung 4 KW
-Max. Durchsatzleistung 800 / Liter/ Stunde
-Dokumentation
-Abmaße LxBxH 1,7x1x1,6 Meter / Gewicht 400Kg

Bvticjyuvm
6
Spiralbohrerschleifmaschine DAREX SP 2500 -Schleifdurchmesser 1,5-16mm -3x Werkzeugaufnahmen -1x Ersatzschleifscheibe -Maschinenunterbau -Dokumentation Abmaße: LxBxH 0,5x0,5x1,6 Meter / Gewicht 80Kg
Spiralbohrerschleifmaschine DAREX SP 2500

-Schleifdurchmesser 1,5-16mm
-3x Werkzeugaufnahmen
-1x Ersatzschleifscheibe
-Maschinenunterbau
-Dokumentation

Abmaße:
LxBxH 0,5x0,5x1,6 Meter / Gewicht 80Kg
9
For Sale: 2x Gardner Denver DLR 300 Pumps with Control Cabinet and Mounting Plates Brand/Model: Elmo Rietschle / Gardner Denver DLR 300 Year of Manufacture: 2010 Capacity: 300 m³/hour Pressure: 1.4 bar Power: 11 kW per pump Year: 2010 Includes: Control cabinet with Siemens S7 PLC and pre-installed program 2x Danfoss VLT frequency regulators (11 kW each) 2 mounting plates for pump installation Condition: Removed in working condition from an industrial facility A well-maintained set, ideal for various industrial applications. 📩 Contact us for pricing and more details!
For Sale: 2x Gardner Denver DLR 300 Pumps with Control Cabinet and Mounting Plates

Brand/Model: Elmo Rietschle / Gardner Denver DLR 300
Year of Manufacture: 2010
Capacity: 300 m³/hour
Pressure: 1.4 bar
Power: 11 kW per pump
Year: 2010
Includes:
Control cabinet with Siemens S7 PLC and pre-installed program
2x Danfoss VLT frequency regulators (11 kW each)
2 mounting plates for pump installation
Condition: Removed in working condition from an industrial facility
A well-maintained set, ideal for various industrial applications.

📩 Contact us for pricing and more details!

Suche speichern
  • Sie erhalten kostenlos neue Angebote per E-Mail
  • Den Suchauftrag können Sie jederzeit beenden
  • Ihre E-Mail Adresse wird unter keinen Umständen an dritte weitergegeben
Hier können Sie werben.
Kontaktieren Sie uns für ein unverbindliches Angebot.

Angebot einholen
Noch nicht angemeldet ?

Klicken Sie auf den Button "Mehr Informationen" um sich über unsere Leistungen und Preise zu informieren.

Bei jedem unserer angebotenen Tarife gibt es einen Testzeitraum von 6 Monaten. Probiere Sie uns kostenlos aus !

Jetzt kostenlos registrieren