KRAUSS MAFFEI KM CX 420-4300

Number of operating hours: 37,589 hours

Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN

Oil tank capacity: 1075 L

USED CONVEYOR BELT MB

Width : 450 mm
Straight part : 700 mm band with brackets
Inclined part : 1700 mm

Very good condition
Dimensions : 500x350
Positive mould
6 knocks cycle

Display 3 axis

Year 2021

Type: RC2E 20
Rated cooling capacity: 18.8 kW - 16,200 kcal/h
Pump flow: 55 L /min
Mint condition - 6 month warranty.

BLOW MOULDING MACHINE KAUTEX KBS2 – 61/60


Year 1998
Tonnage: 60 tons
Tray dimensions: 700 x 1000 mm
Max mold height: 1250 mm
Max mold width: 800 mm
Minimum mold thickness: 620 mm
Max mold opening stroke: 675 mm
Screw diameter: 100 mm
L/D ratio: 20
Maximum extrudable weight in PE: 9000 Gr
Maximum injectable volume: 12 liters
Number of parison regulation points: 64
Die Min/max diameter: 100/230

UNILOM MILACRON Blow moulding machine

Type BW20
Year 2009

Equipped with MOOG parison thickness control and accumulation head
Screw diameter: 90 mm
WK130 torpedo extrusion head with pre-accumulator
There is a stripping station and a robot
Sold with 1 mold of 20 liter water bottles and 3 other molds
This machine can produce 120 cans per hour

Injection moulding machine BILLION 200T Hercule
Year: 1998
Model: H780/200
Screw diameter: 50mm
Injection volume: 422 cm3
Injection pressure: 1843 bars
L/D: 22.3
Max locking force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Between vertical and horizontal columns: 610mm x 610mm
Column diameter: 100 mm
Maximum ejection stroke: 150 mm
Dimensions: 6.10 x 1.90 x 2.35m
Weight: 9.5T

BILLION 50 T PROXIMA press
Year: 2001
Model: H200/50
Screw diameter: 30 mm
Injection volume: 106 cm3
Injection pressure: 1910 bar
Maximum locking force: 500 KN
Dimensions of the trays: 580 mm x 520 mm
Min/max mold thickness: 180/360 mm
Dimensions: 3.52 x 1.17 x 1.72m
Weight: 3.5T

BILLION HERCULES H2000/320 - 320T

Year August 1999
Screw diameter: 80 mm
Injection volume: 1433 cm3
Passage between columns: 735 x 735 mm
Mold thickness: 330 to 680 mm
Weight: 16.5T
Dimensions: 7.88 x 2.02 x 2.60m
Sold with a Robot SEPRO 4030 stroke of 5500 mm visual 1 / year 2007

YVROUD extruder

In good condition
Dimensions: 2780mm x 1020mm x 1820mm

Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg

BATTENFELD FISCHER – VK 1-4

FISCHER BATTENFELD
Reference: VK 1-4
Number Of Heads: 2
Screw diameter: 60mm
L/D: 24
Thickness control: MOOG 32 point
Center distance: 100 mm
Year: 1997
In good working order

Souflleuse MOB 20 litres

Type: MOB 20 liters
Year: 1990 redone in 2000
Passage between column: 425 x 400 mm
Minimum thickness: 210 mm
Opening stroke: 660 mm
Screw diameter: 80 mm – L/D: 25 mm
Parison: 14 points
1 core

Brand: BEMACO
Model: BA 200
Year: 1994
Clamp force: 800
Type: 200 ltr, accumulator head technology
Extruder: 130 mm, 24 L/D
Head: 20 ltr
Min/max Die diameter 120 - 400
Mould platens: 1320 x 800(maximum daylight 1600)
Bottom blow-pin: included
Overall dimensions (length
x width x height 8000 x 4000 x 6500
Control Siemens SIMATIC OP 396
Programmer
Siemens S5 100U/103CPU 32
points

Brand : JUNGHEINRICH
Type : ETV A 13.5 G E 115 - 820 - DZ
Height lifting : 8 300 mm
Battery : OK
Revised material
Correct condition
New stabulizer wheels

Electrical forkliftfenwick T18
Batterie ok
revised material

Hz : 50
Brand : Hydrovane
Series : Série HV
Description : Hydrovane Hypac (Série HV)
Compressed air gas
Minimum pressure (Bar g) : 6
Min/Max pressure (Bar g) : 8 à 10
Engine power (kW) : 11
Noise level (DB) : 69
Lenght (millimètres) : 825
Width (millimètre) : 1135
Size (millimètres) : 1390
air exits (fingers) : 0.75
Weight (kilograms) : 412
Speed (T/MN) : 1450
Oil capacity (l) : 7
Cooling system : with air
Cleaned air (mg/m3) : <1
Air production = 1.74 m3/mins
Speed (rpm): 1450
Use pressure: 10 Bar g,
Air production = 1.5 m3/mins

Working hours : 32 385 hours
230v - 1 - 50 HZ - PE
Very good condition

USED Engel ​D​uo 940M/940H/650 combi M

Year: 2010

BILLION 200 TONS H1300/200 Injection molding machine

For specifications see attached PDF

ARBURG 130 TONS.

- Year 2001
- Type : 470 C - 1300 - 675
- Screw diameter : 40 mm
- 1 corepuller
- Interface robot
- In between columns : 470 x 470 mm

SUMITOMO ELECTRICAL 75 TONS

- Year : 2000
- Type : SE75S
- In between columns : 360 x 360 mm
- Opening stroke : 300 mm
- Screw diameter :25 mm
- Injection volume : 56 cm3

KRAUSSMAFFEI 200 T -

- Type : KM700-200
- Year : 1998
- In between columns : 560 x 560 mm
- Screw diameter : 45 mm
- Ijnection volume : 305 cm3
- 3 core
- Interface robot
- Equiped with a peak cons
- 1 accumulator
- 8 heating zones

NEGRI-BOSSI 370 TONS

Type: 3700H-2200

Specifications see attached PDF

USED NESTAL 150 TONS

N580/150-MP

See attached PDF

BILLION Bi material H6860/2000-550 TONS

Working hours: 32000
Very good condition

INJECTION 1: H6860

Screw diameter: 105 mm
Ration L/D - 20
Injectable volume: Cm3 4546
Injection pressure: 1509 BAR
Max injection ration: 2160 Cm3/s
Max speed screw rotation Min-1 150

INJECTION 2: H200

Screw diameter: 70mm
ration L/D - 23,1
Injectable volume: 1097 Cm3
Injection pressure :1822 BAR
Max injection ration: 845 Cm3/s
Max speed screw rotation Min-1 200

CLAMPING
Clamping force: 550 Tons
MinimumThickness mould: 300 mm
Maximun Thickness mould: 1000 mm
Opening stroke: 1100 mm
Plates dimensions H x V: 1350 x 1350 mm
In between columns H x V : 930 x 930 mm
Maximun distance between pltes : 2100 mm

Weight
Total weight kg: 26500
Clamping weight kg:15000
Injection weight kg: 14800

In working conditions
Working hours: 12.022

Clamping force: 3000 kN
Opening stroke: 405 mm.
Ejector stroke: 105 mm.
Ejector force: 20,1 kN

Pump drive power: 37 kW
Screw diameter: 60 mm.
Max. swept volume: 735 mc3
Screw speed max.: 226 r/min
Injection rate: 351 cm3/s
Injection rate increased: 283 cm3/s
Injection pressure: 1481 bar.
Spec. injection pressure increased: 1835 bar
Nozzle stroke: 500 mm.
Nozzle cont. pressure: 110 kN

GENERAL INFORMATIONS

Dimensions: 6200 x 2150 x Ht.2400 mm
Weight: 13500 kg
Engine power: 75 kw

- INJECTION UNIT
Plasticising capacity: (PS) 682 gr
Ration length diameter: 23,7
Injection pressure: 2000 bar
Scew diametre: 60 mm

- CLOSING UNIT
Plates dimensions: 995 x 1050 mm
In between columns: 630 x 630 mm
Clamping force: 280 TONS

COMMENTS
workings hours: 37000
Interface robot - 1 core

-INJECTION UNIT:
Plasticising capacity: (PS) 50 gr/s
Screw speed: 250 rpm
Ration length diameter: 23 mm
Injection pressure: 2200 bar
Number of temperature zones: 4
Scew diametre: 52 mm
Maximum injection rate: 190 cc/s
Injection volume: 640 cm3
- CLOSING UNIT:

Plates dimensions: 870 x 790 mm
In between columns 570 x 510 mm
Thickness mould mini/max: 200 / 630 mm

COMMENTS:
NEGRI-BOSSI 210 T : Very good condition
Working Hour: 34808

Paperplast international Dry 40

Format: 76x102

Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater

Polar 155 CE

Gergeck system six backgauge control
Pilz control unit
PIlz 2 hand control
Pilz photocell safety
Main motor: frequency driven.

Complete with spare knife

Theisen en Bonitz Sprint HP 320

20 stations High pile collating machine
Complete with pumps

Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm

Polar 76 em

Size: 76 cm
With knife change tools and spare knife

Morgana Digifold Pro

Folding creasing machine

Heidelberg Stahfolder T52-4

Year: 2003
Tremat feeder
Without pumps

Card board cutter Schimanek Model 10-110

Year: 1997s
Cutting size: 110 cm
Table cast Iron

Wohlenberg 92 MCS-TV

Cutting size: 92 cm

Complete with knife change tools
Spare knife
Main and side tables with air
Monitor and machine in good condition

Perfect Match
Aquaflex + Aqua

The Dantex Aqua is specifically intended for processing and drying water washable printing plates and has been designed to provide exceptional plate quality, combined with minimal maintenance. It is robustly constructed and provides reliable & consistent operation day after day.

AQUA 760 FEATURES FOR YOUR BENEFIT

Plate size (width x length) mm 762 x 635
Power 8kW (400V 3ph + N + E @12 amps)
Unit dimensions* (L x W x H) mm 4189 x 1500 x 1125
With extended drying 5226 x 1500 x 1125
With extended drying (short version) 4486 x 1500 x 1125
Max. plate thickness 1.7 mm

Processing time: 30 min. (900 mm x 1200 mm x 100 mm / min.)
Fresh water or tank system for washing out flexographic printing plates
Very easy handling and maintenance
Chain drive system
Adjustable surfactant dosage and water flow rate
Double wash head with programmable speed
User friendly interface
Extended drying option

Polar 76 EM Papercutter

Year: 1990
Cutting size: 76 cm

Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools

MBO B30E-1-76/4/4 Folding machine

PALLET FEEDER
COUNTER
SOUND HOOD
1ST UNIT 4 BUCKLES
2ND UNIT 4 BUCKLES
DELIVERY FA 82 ME ASP 66-2ME

Wohlenberg 92 MCS 2 - TV

Airtable: Yes

Schneider Senator 155 MC-2

Year: 1986
With side tabels and spare knife

Muller Laconda 620

– 9 stations collating
– Folding stitching unit: HF 33 c
– complete wit pump
– Year 1990

Hugo Beck Flexo 500 S-e + Tunnel

Manufacturer: Hugo Beck
Type: Flexo 500 S-e + SLB 5012 / 25e
Year of construction: 2008

Film wrapping machine with film width max. 500 mm
Product feed manual as stand-alone machine or automatic in line
Material used Film PE, PO, bio-films, half-tube and flat film
Product dimensions Length from 45 mm, width 10 - 450 mm, height max. 250 mm
Shrink tunnel Hugo Beck SLB 5015 / 23e
Input and output belt 100 cm

Heidelberg Sm 52 Platepunch
Year: 2000

Hohner 48-5 S Stitching head

GKS 5 ton Heavy duty jack, hydraulic lifting jack, 2 pieces

GKS Schwerlastheber V5

GKS-PERFEKT hydraulic lifting devices meet the highest quality standards. They have been tried and tested worldwide for decades, they are robust and particularly durable. Our lifting devices / machine jacks are 100% checked and tested before delivery. In this way we guarantee perfect functionality. The customer receives a
Practical device for universal use at any location, whether in the company, in the workshop, in the open or in production

Hohner 52-8 S stitching head

New in box
Complete with tools and clincher

Polar 78 E

Cutting width: 78 cm
Year: 1996

Complete with knife change tools, spare knife and manual

Perfecta/ Knorr ABS 106 -3 R Destacker right

With rear shield

Built in 1994

Maximum format: 75 x 104 cm
Maximum stack height in one go: 16.5 cm
Stack height of pile max: 106 cm