Mouvex SLC Eccentric disc pump, Stainless pump on mobile skid, with control panel, variable speed, 0.75Kw, 3Ph

Groen Tdb/7-20 heated tilting kettle Stainless, heated mixing kettle, two 20l removable bowls, scrape surface, tilt to discharge, 3Ph

Loynds confectionery press, Stainless confectionery press, previously used for chewing gum,

APV heated lobe pump, Stainless lobe pump, 22mm inlet and outlet, jacketed, 22mm inlet and outlet, 0.25Kw, 3Ph

Vibtec Vibratory conveyor, Stainless vibratory conveyor, dimensions 1500mm x 160mm, on mobile frame, 1Ph

Progressive cavity pump, Stainless contact parts, size 025, pressure stage 6l, 3Ph

Stainless heated cabinet, three levels, max product 500mm L x 350mm W, adjustable temp control, 1Ph

STS Stainless trolleys two STS stainless trolleys

Meiji Microscope, Tabletop microscope, with vieing light, MD Lens, adjustable height, 1Ph

Loypack One shot chocolate depositor, Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Nielsen 750L Chocolate kettle, 750L chocolate kettle, top mounted motor with agitation, variable speed, scrape surface, side bottom discharge, 3Ph

Low and Duff 6T Chocolate kettle, 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph

Clarke Air compressor Serial: 135969 2018, Air compressor, 200L, 5.5Hp, 3Ph

Clarke Air compressor Serial: 136106 2018, Air compressor, 270L, 7.5Kw, 3Ph

Stainless vertical multistage centrifugal pump, 7.5Kw, 50mm inlet and outlet, the motor includes a frequency converter and PI controller in the motor terminal box, this enables variable control of the motor speed, 3Ph (Unused)

Hobart HSM40 Planetary mixer, Serial: 970169619 Variable speed, 40l capacity, comes with two bowls and the whisk attachment, timer control, 3Ph

2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)

Stainless, 50Kg hopper, belt dimensions 2200mm x 110mm, height of flights 30mm, missing motor and legs

Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Hobart HSM10 planetary mixer, Serial: 970197527, Planetary mixer, tabletop, with whisk and beater attachment, two bowls, variable speed, 1Ph

Hobart HSM10 planetary mixer, Serial: 970197530, Planetary mixer, tabletop, with whisk attachment, variable speed, 1Ph

Hobart 20l Planetary mixer, tabletop, with whisk attachment, variable speed, 1Ph

Serial: SD150P5311297 Stainless, variable speed, height adjustable frame, 50l capacity mesh guarded hopper, roller conveyor at discharge point, comes with two different styles of nozzles, foot pedal, with manual

Follett EITS600 Ice machine, Stainless, two ice making units plus mobile storage bin, up to 160Kgs per 24hours, 1Ph

Rollenbreite: 400 mm
Rollendurchmesser: 60 mm
Anzahl der Rollen: 29
Länge: 3000 mm

Presskraft: 40 to
Biegelänge: 1500 mm
Achsen: X und Y Achse
Hub: 100 mm
Einbauhöhe: 310 mm
Antriebskonzept: hydraulisch
Öltank: 38 l
Motor: 6 kW
Hinteranschlag: 420 mm
Matrize: 1
Geschwindigkeit: 10 mm/s
Rückzugsgeschwindigkeit: 12 mm/s
Hinteranschlaggeschwindigkeit: 40 mm/s
Genauigkeit Pressbalken: 0.02 +/- mm
Genauigkeit Hinteranschlag: 0.05 +/- mm
Länge: 2000 mm
Breite: 950 mm
Höhe: 1900 mm
Gewicht: 1800 kg

Stanzkraft: 55 to
Ausladung: 500 mm
Max. Durchmesser bei Blechstärke (Baustahl): 40 x 10 mm
Max. Hubzahl bei 20 mm Hub: 37 1/min
Motor: 5 kW
Länge: 1550 mm
Breite: 1200 mm
Höhe: 1950 mm
Gewicht: 1150 kg

Schnittdurchmesser: 540 mm
Sägebandlänge: 6700 mm
Schnittbreite: 610 mm
Hub: 1000 mm
Steuerung: NC
Bandgeschwindigkeit: 20-116 m/min
Säulendurchmesser: 150 mm
Gesamtleistungsbedarf: 11 kW
Maschinengewicht ca.: 3,6 t
Raumbedarf ca.: m

Schnittdurchmesser: 530 mm
Sägebandlänge: 6670 mm
Schnittbreite: 530 mm
Steuerung: CNC
Hauptantriebsmotor: 7,5 kW
Rollbahn: optional
Gesamtleistungsbedarf: 13 kW
Maschinengewicht ca.: 6,3 t
Raumbedarf ca.: m

Ausladung: 4000 mm
Tragkraft in kg: 1000 kg
Schwenkbereich: mindestens 160 Grad
Höhe: 4000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Ausladung: 4000 mm
Tragkraft in kg: 1000 kg
Schwenkbereich: mindestens 160 Grad
Höhe: 4000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Ausladung: 3500 mm
Tragkraft in kg: 1000 kg
Schwenkbereich: mindestens 160 Grad
Höhe: 3000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Tragkraft in kg: 2500 kg
Hub: 2900 mm
Gabellänge: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 3310 t
Raumbedarf ca.: m

Planscheibendurchmesser: 1400 mm
Umlaufdurchmesser: 1600 mm
Drehhöhe: 1500 mm
Steuerung: Siemens
Typ: 840 D
Werkstückgewicht: 6500 kg
Supportverschiebung senkrecht: 1000 mm
Drehzahl: 10-315 U/min
Vorschub: 3600 mm/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 1250 mm
Umlaufdurchmesser: 1500 mm
Drehhöhe: 1250 mm
Steuerung: Siemens
Typ: 840 Dsl
Werkzeugaufnahme: 4 Pos.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 1200 mm
Umlaufdurchmesser: 1500 mm
Drehhöhe: 1300 mm
Supportverstellung: 800 mm
Seitensupport - Horizontalverstellung: 550 mm
Digitalanzeige: Heidenhain
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Drehdurchmesser: 820 mm
Drehlänge: 300 mm
Drehdurchmesser über Support: 465 mm
Drehmoment an der Spindel: 3000 Nm
Drehzahl: 5,6-1120 U/min
Vorschub: 1-5000 mm/min
Eilgang: 5000 mm/min
Reitstock-Pinolenaufnahme MK: 6
Dreibackenfutter Forckrath: mm
Lünette: mm
Hauptantriebsmotor: 50 kW
Hauptspindeldurchmesser: 170 mm
Spindeldurchlass: 128 mm
Reitstockpinolendurchmesser: 125 mm
Reitstockpinolenhub: 250 mm
z-Achse: 3000 mm
x-Achse: 550 mm
Gesamtleistungsbedarf: 52 kW
Maschinengewicht ca.: 7,1 t
Raumbedarf ca.: m

Ref.-Nr.: 18255
Hersteller: ENGEL
Baujahr: 2004

Schließeinheit
Schließkraft: 180 ton
Öffnungsweg: 750 mm
Holmmaß (h x v): 960 x830 mm
Einbauhöhe min.: 500 mm
Öffnungsweite: 1250 mm

Spritzeinheit
Schneckendurchmesser: 45 mm
Spritzvolumen: 318 cm³
Spritzgewicht PS: 302 gr
Spritzdruck: 1769/2360 bar

Maße und Gewichte
Maschinengewicht: 13500 Kg

Roboter
Marke: Wittman
Typ: W743
Baujahr: 2009

CHILLER GR2A 80/Z
Year: 2015
Very good state
Nominal cooling capacity: 77.5 kw - 66,600 kcal /h
Pump flow: 222 L/min
Excellent condition - 9 month warranty.
Net weight: 900 KG
Dimensions: 2200mm x 1450mm x 2200mm

Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm

Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm

2 hydraulic core pull

Dimensions:
4960 x 3656 x 3360mm

Weight: 14500KG

Hesta blow moulding machine in good condition
HESTA ST 502 extrusion blow molding machine
clamping force : 150 KN
Screw diameter: 50 mm / 22D
2 x 125mm
Speed: 300mm/sec
Shape thickness: 230-280mm
Maximum PE weight: 400 g
Machine weight: 3200 KG

BLOW MOLDING MACHINE BILLION P300
3 liters
Clamping force: 2 x 3.3 T
Closing stroke: 2 x 150 mm
Min mold thickness: 150mm
Platen Dimensions: Horizontal: 310mm x Vertical: 310mm
Screw diameter: 50mm
Screw stroke: 170 mm
Capacity per shot: 333 cm3
Pressure on the material: 1000 kg/cm2
L/D screw ratio: 15
Many spare parts supplied with the machine + several control cabinets + 1 set of molds

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 200
This injection blow molding machine PROCREA REV 200 can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 4 liters and weight of 5 gr. at 200 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 200 is very simple thanks to the automatic extraction system applied to the revolver.

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 150
This PROCREA REV 150 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 1500 cc and weight of 5 gr. at 150 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 150 is very simple thanks to the automatic extraction system applied to the revolver.

2 head
Entraxe :100 mm
Volume max of the bottle : 0,5 l
Number of post: 1
Extrusion continuous
Nombre d'extrudeuses: 1
Screw diameter : 60 mm
Rapport L/D: 20
Parison thickness control : PROFILOG 32 point
Heating knife
Voltage : 380 V Triphase
Frequency : 50 Hz

Robot WITTMANN
Reference : PIP 3040 BZ
Year : 2002

1 Set of PIOVAN peripheral with : 1 isolated hopper TN600 + 1 dryer high temperature PIOVAN DP622 + 1 PIOVAN power turbine F48

DRYING HOPPER brand PIOVAN Reference TN 600
With trapdoor
Contain 600 liters
Year 2015 , in perfect condition
7000 working hours

Dryer PIOVAN DP622
High temperature 200 °C
Dew point : - 60°C
Year 2015 , in perfect condition
7000 working hours

Power Turbine PIOVAN reference FA48
Power : 3 KW
Year 2015 , in perfect condition
7000 working hours

PLATFORM

SEPRO robot reference SR 4030 S3 visual in good condition
Year : April 2007
Weight of the robot : 900 KG
Weight of the command : 110 KG
Rated load : 12 kg

Strocke in X : 5500 mm
Strocke in Y : 800 mm
Strocke in Z : 1400 mm

CHILLER GRAC 250/Z
Year 2009
Nominal cooling capacity: 249 kw - 214.000 kcal /h
Pump flow: 710 L /min
Very good condition - 6 month warranty.
Weight : 2600 KG
Dimensions : 5500 mm x 1650 mm x 2300 mm