SEPRO robot reference SR 4030 S3 visual in good condition
Year : April 2007
Weight of the robot : 900 KG
Weight of the command : 110 KG
Rated load : 12 kg

Strocke in X : 5500 mm
Strocke in Y : 800 mm
Strocke in Z : 1400 mm

CHILLER GRAC 250/Z
Year 2009
Nominal cooling capacity: 249 kw - 214.000 kcal /h
Pump flow: 710 L /min
Very good condition - 6 month warranty.
Weight : 2600 KG
Dimensions : 5500 mm x 1650 mm x 2300 mm

CHILLER GRAC 330/Z
Year 2006
Nominal cooling capacity: 328 kw - 282.000 kcal /h
Pump flow: 940 L /min
Very good condition - 6 month warranty.
Weight : 3400 KG
Dimensions : 5100 mm x 2150 mm x 2150 mm

Chiller INDUSTRIAL FRIGO type SIRE1 - 165/350 HP/Z/X With integrated energy saving system
Nominal cooling capacity: 164 KW - 141000 kcal/H
2 compressors 13,8 KW - max 24,5 KW
1 pump 10 KW - 470 L/min - 5,3 bars
Cooling capacity 175 KW - 151000 kcal/H
1 pump2 KW - 500 L/min - 1,7 bars
4 fans power of 1,3 KW - 65 000 m3/H
Internal capacity : 750 liters
Dimension : 3700 mm x 1100 mm x 2100 mm
Weight : 2300 KG

CHILLER GR2A 40/Z
Year 2017
Nominal cooling capacity: 40 KW - 33.100 kcal /h
Pump flow : 110 L /min
Very good condition - 6 month warranty.

CHILLER GR1AC30
Year 2017
Nominal cooling capacity: 30 kw - 24.000 kcal /h
Pump flow: 80 L /min
Very good condition - 6 month warranty.
Weight : 470 KG
Dimensions : 1100 mm x 1900 mm x 1900 mm

CHILLER brand DELTA PROCESS ALIZE 16 - 45 KW
Year 2002
In goog condition
Cooling power :45 KW
Voltage : 400 V
Frequency : 50 Hertz
Cooling liquid : R407C
Power install on the chiller : 15,74 kw

CHILLER brand PIOVAN CH 480 - 57 KW
Year 2015
In perfect condition - 7000 working hours
Cooling power : 57 KW
Voltage : 400 V
Frequency : 50 Hertz
Cooling liquid : R407C

Dryer PIOVAN DP622
High temperature 200 °C
Dew point : - 60°C
Year 2015 , in perfect condition
7000 working hours

PIOVAN RPA 800 mould dryer
Total power : 7,8 KW
Weight : 210 KG
Dimensions: 600 x 750 x 1500 mm
Year 2015 , in perfect condition , only 7000 working hours.

From 700 to 800 m3/h

For ambient temperature up to 45°C and humidity up to 90%
Easy maintenance
Compact footprint for installation close to primary machine on mezanine or floor.

Piovan Mould Dryers is ideal to prevent condensation in the mould area. They can operate in open or closed loop and for single or multiple machines.
Consistent dew point is assured by the PID control. Designed for fast start-up, do not need settings by operators.

They are ideally suited for:
• Mould enclosures of fast-cycle IMM’s
• Mould enclosures of blow moulding machines
• Mould enclosures and robot area of PET IMM’s

SEGHERS SMC 220 L thermal stripping system
Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters.
The combustion chamber is heated to approximately 420 degrees.
The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber.
Perfect cleaning for a cycle time of 90 to 150 min.
Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm
Dimensions of the basket: diameter 210 mm and length: 260 mm

SURFACE GRINDING MACHINE JONES & SHIPMAN
FORMAT 5-150

Lathe LEFEVRE ET MARTIN
Distance between points: 1000mm

Lathe H.ERNAULT SOMUA
Distance between points: 1000mm

Lathe GALLIC (Batch - 1 )
Distance between points: 1000mm

Lathe H.ERNAULT BATIGNOLLES ( Batch - 1)
Distance between points: 1000mm

Lathe CAZENEUVE HB575
Distance between points: 1000mm
+ With visual

MILLING MACHINE GAMBIN 11M ( Batch -1)
With visual

MILLING MACHINE KONDIA Type FV-1

MILLING MACHINE HURON KU5 ( Batch -1)
With visual

Vertical injection moulding machine REP super Sancar
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm

Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot

Billion 200 T injection molding machine
Model : H780 / 200
Year : 1998
Screw diameter: 50mm
Injectable volume : 422 cm3
Injection pressure: 1843 bars
L / D: 22.3
Clamping force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Distance between tie bars (h x v): 610mm x 610mm
Ejection stroke: 150mm
Dimension : 6,1 m x 1,9m x 2,35m
Weight : 9.5 t

Injection moulding machine SANDRETTO serie 9
Clamping force : 230 T
Year : 2001
Screw diameter is 50 mm.
Volume injectable : 475 cm3
Platen dimensions : 860 x 860 mm
Distance between tie bar is : 570 x 570 mm
Dimension are : 6,67 m x 2,22 m x 1,82 m
Weight of the machine : 10 200 KG

Billion 140 T HERCULE injection molding machine
Model : H780 / 140
Year : 2000
Screw diameter: 45mm
Injectable volume : 220 cm3
Injection pressure: 2100 bars
Clamping force: 1400 KN
Platen dimension : 650 x 650 mm
Distance between tie bar : 430 x 430 mm
Platen dimensions (h x v): 610mm x 610mm
Dimension : 5,1 m x 1,8 m x 2,20m
Weight : 7 T

SANDRETTO serie 8 790-200
Clamping force : 200 T
Distance between tie bar : 510 x 510 mm
Mould thickness min / max : 210 - 630 mm
Opening strocke : 550 mm
Injectable volume : 546 cm3
Presure on the plastic material max : 1450 bars
Screw diameter : 55 mm

Injection moulding machine in good condition BM BIRAGHI sintesi 150
Screw diameter : 50 mm
Clamping force : 150 T
Distance between tie bar : 460 x 460 mm
470 mm opening stroke
150 mm min opening mould

Injection moulding machine KRAUSS MAFFEI KM 65-1350
Clamping force : 65 T
Year 1996
Screw diameter : 30 mm
With EUROMAP 12

Billion 50 T PROXIMA injection molding machine
Model : H200/50
DIXIT 2 command
Year : 2001
Screw diameter: 30 mm
Injectable volume : 106 cm3
Injection pressure: 1910 bars
Clamping force: 500 KN
Platen dimension : 580 x 520 mm
Platen dimension : 580 mm x 520 mm
Mould thickness min/max : 180mm x 360 mm
Dimension : 3,52 m x 1,17 m x 1,72 m
Weight : 3,5 T
45000 working hours

INJECTION MOULDING MACHINE KRAUSS MAFFEI 500 H 3500 C1
Working hours : 51 850 hours
Clamping force : 500 T
Year : 2000
Screw diameter : 90 mm
Miximum injection volume : 1953 cm3
Injection pressure max : 1742 bars
Platen dimension : 1270 x 1200 mm
Distance between tie bar : 900 x 800 mm
Mould min thickness : 480 mm
Opening strocke max : 1170 mm
Distance max between platen : 1650 mm
Ejection stroke : 250 mm
Equipement :
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen

HMI / new control unit
New metering motor
Locking unit redone
Machine calibration done
New hydraulic hoses

NEGRI BOSSI 480 T
Clamping Force: 480T
reference : 4800 H 3800
Screw diameter: 90 mm
L/D ratio: 20
Maximum material pressure: 1500 bar
Injection volume : 2160 cm3
Injection capacity: 2270 g
Injection speed: 500mm/s
Plastification: 105 g/s
Clearence between tie bars (H x V): 710 x 800
Platen dimensions (H x V): 1190 x 1150
Max mold thickness: 850mm
Minimum mold thickness: 200mm
Ejection stroke: 300mm
Air cores: 2
Hydraulic cores: 2
+ 1 Wittmann Robot
Working hours : 70 000 h

Sandretto injection moulding machine MEGA T 610 T
Reference : 4435 - 610
Command : SEF 100

year :1996
Working hours : 47 200 h
Screw diameter : 80 mm
Volume injectable : 2237 cm3
Injection pressure : 1960 bars
Distance between tie bar : 850 x 850 mm
Platen dimensions : 1260 x 1260 mm
Mould thickness : min : 300 – max : 1000 mm

Interface robot
2 core pull
2 air valve

Sheetfed offset machine

2007 Ryobi 524-GX – 4 color- 36 x 52 cm
Ryobimatic
Semi-APC,
PCS-H 4 console

Pokomat P16/320 Injector, Stainless, 16 needle injector, capacity 800Kgs/h, with two sets of needles, belt dimensions 1300mm x 300mm, 3Ph

Bizerba S121 Meat tenderizer Serial: 11437855 2017, can be used as a strip cutter or tenderizing of meat. Ideal for turning fresh meat and cold cuts as well as fruit and veg into fine salads, tabletop, 1Ph

Turbovac TV5575 Dip tank Serial: 20151529 2015, stainless dip tank, shrink tank, platform dimensions 730mm x 535mm, dipping length 300mm, max product height 250mm, max water capacity 130l, max product weight 30Kgs, adjustable temp control, exhaust hood, with outfeed conveyor, mobile, 3Ph

Temperaturbereich: in Helium 2275 ° C
Brennraum Ø x Höhe: 114 x 153 mm
Gesamtleistung: 20 kW
Raumbedarf (B x T x H): 1,55 x 0,65 x 1,9 m
Maschinen-Gewicht: 640 kg
Zustand: sehr gut

Hochtemperatursinterofen, max. Temp. in Argon ca. 1700 °C, in Helium bis 2275 °C, der Ofen wurde für studentische/wissenschaftliche Zwecke verwendet, das Heizelement ist aus Graphit und der Ofen wurde zum Sintern von keramischen Bauteilen verwendet.

Zubehör: Vakuumpumpe Leybold Trivac Vakuumpumpe D 25 B - Auspuff-Filter AF 16-25

2007, Stainless mixer aerator, 500L, mobile frame, see link for all spec http://www.shufflemix.com/en/aerators/shufflemixer-250-1000/

2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Shuffle-mix 250 mixer / aerator, Serial: 200-103 Stainless mixer, 250L, mobile frame, see http://www.shufflemix.com/en/aerators/shufflemixer-250-1000/ for all spec

Seewer Rondo pastry brake, Stainless frame, belt dimensions 3200mm x 640mm, top mounted flour duster, mobile, 3Ph

Biegelänge: 3200 mm
Blechstärke (420 N/mm²): 1 mm
Max. Blechstärke - Edelstahl: 0.6 mm
Max. Blechstärke - Aluminium: 15 mm
Antrieb: Motorisch
Max. Biegewinkel: 155 °
max. Öffnung: 110 mm
Hinteranschlag: 750 mm
Hinteranschlaggeschwindigkeit: 300 mm/s
Genauigkeit Hinteranschlag: 0.1 +/- mm
Verstellbereich der Biegewange max.: 20 mm
Biegegeschwindigkeit: 100 °/sek
Max. Klemmgeschwindigkeit: 90 mm/s
Länge: 4500 mm
Breite: 2100 mm
Höhe: 1650 mm
Gewicht: 2900 kg

Biegelänge: 2550 mm
Blechstärke (420 N/mm²): 1.5 mm
Max. Blechstärke - Edelstahl: 1 mm
Max. Blechstärke - Aluminium: 2 mm
Antrieb: Motorisch
Max. Biegewinkel: 155 °
max. Öffnung: 110 mm
Hinteranschlag: 750 mm
Hinteranschlaggeschwindigkeit: 300 mm/s
Genauigkeit Hinteranschlag: 0.1 +/- mm
Verstellbereich der Biegewange max.: 0-20 mm
Biegegeschwindigkeit: 100 °/sek
Max. Klemmgeschwindigkeit: 90 mm/s
Länge: 3800 mm
Breite: 2100 mm
Höhe: 1650 mm
Gewicht: 2500 kg

Biegelänge: 2550 mm
Blechstärke (420 N/mm²): 1.5 mm
Max. Blechstärke - Edelstahl: 1 mm
Max. Blechstärke - Aluminium: 2 mm
Antrieb: Motorisch
Max. Biegewinkel: 155 °
max. Öffnung: 110 mm
Hinteranschlag: 1000 mm
Hinteranschlaggeschwindigkeit: 300 mm/s
Genauigkeit Hinteranschlag: 0.1 +/- mm
Verstellbereich der Biegewange max.: 0-20 mm
Biegegeschwindigkeit: 100 °/sek
Max. Klemmgeschwindigkeit: 90 mm/s
Länge: 3800 mm
Breite: 2350 mm
Höhe: 1650 mm
Gewicht: 2500 kg

Presskraft: 600 to
Biegelänge: 4050 mm
Achsen: Y1 / Y2 / X und R Achse
Hub: 365 mm
Abstand zwischen den Ständern: 3100 mm
Ausladung im Seitenständer: 410 mm
Einbauhöhe: 700 mm
Antriebskonzept: hydraulisch
Eilgang Y-Achse: 160 mm/s
Arbeitsgeschwindigkeit Y-Achse: 10 mm/s
Rückzugsgeschwindigkeit Y-Achse: 160 mm/s
Hinteranschlag Verfahrweg X-Achse: 650 mm
Hinteranschlagsgeschwindigkeit X-Achse: 500 mm/s
Hinteranschlag Verfahrweg R-Achse: 250 mm
Tischhöhe: 900 mm
Tischbreite: 154 mm
Öltank: 280 l
Motorleistung: 2 x 11 kW
Länge: 5750 mm
Breite: 2500 mm
Höhe: 4000 mm
Gewicht: 40500 kg

x-Weg: 3500 mm
y-Weg: 1600 mm
z-Weg: 900 mm
Drehzahl: 20-2000 U/min
Spindelaufnahme ISO: SK50
Tischabmessung: 5000x1000 mm
Steuerung: Heidenhain TNC 415B
Spindelantriebmotor: 22 kW
Eilgang: 5000 mm/min
Tischbelastung: 12500 kg
Abmessung L-B-H: 7,3x4x3,2 m
Fräskopf - schwenkbar + / -: CNC 360 °
Maschinengewicht ca.: 16 t

Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP

Year: 2003

x-Weg: 6300 mm
y-Weg: 2200 mm
Werkstückhöhe: 1835 mm
Tischfläche: 6000x1835 mm
Support: 2
Seitensupport: 2
Anzahl der T-Nuten: 7
T-Nuten - Abstand: 240 mm
T-Nuten - Breite: 28 mm
Bettlänge: 14650 mm
Ständerdurchgang: 2075 mm
Vorschub: 5-60 m/min
Werkstückgewicht: 15000 kg
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 55 t
Raumbedarf ca.: 14,65x4,37x4,05 m

Rundtisch-Durchmesser: . mm
Schleifscheiben-Durchmesser max.: . mm
mit Handlauf: . 0
Handauflage: . 0

Druck: 630 KN
Ständerweite: 800 mm
Hub: 150 mm
Tischfläche: 720x550 mm
Stößelfläche: 720x520 mm
Einbauhöhe: 420 mm
Eilsenkgeschwindigkeit: 394 mm/sec
Arbeitsgeschwindigkeit: 71/17 mm/sec
Rücklaufgeschwindigkeit: 390 mm/sec
Verstellwege der Hublage: 120 mm
Gesamtleistungsbedarf: 15 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m