stainless conveyor, belt dimensions 2000mm L x 400mm W, on mobile frame

stainless mobile legs, belt dimensions 1200mm x 550mm,

stainless inclined conveyor, belt dimensions 2200mm L x 800mm W, infeed 350mm discharge 1000mm.

Loma AS checkweigher 1200C-1-20750 stainless frame, weigh bed 300mm x 200mm, overall conveyor length 1100mm,

Otem H100 Flow wrapper 417-82 Stainless infeed 1500mm, 200mm jaw width, adjustable temperature jaw / fin seals, overall length 2500mm

Larkap DMB50-0 vibratory feeder conveyor 000101-6 2000, stainless vibratory feed conveyors, adjustable vibration for product control, on stainless frame. 1Ph.

metal detector start/stop metal detector, belt dimensions 2000mm L x 1000m W, Aperture 1200mm L x 60mm H

aperture 200mm x 70mm, belt length 1700mm, pneumatic push reject with alarm

2009 stainless depositor, 25L hopper, adjustable weight control, variable speed

Europack Compact RTSW automatic sleeve wrapper 07-10993 2007, automatic sleeve wrapper, powered belt infeed, variable belt speed, adjustable tunnel & sealing temperature, teflon coated sealing jaw, aperture 350mm x 200mm, 3Ph

2002 turntable style pallet wrapper, variable speed pallet wrapper, 1400mm diameter turntable, hoists up to 2000mm

Lot 520 Cintex Metal detector Model: Sentry Stainless frame, variable speed, blow-off reject (air), Aperture 380mm W x 180mm H, belt dimensions 1200mm x 300mm, See video at: https://www.youtube.com/watch?v=SYbOAt8qocI

Lot 359 Transnorm 45 degree bend conveyor Serial: R2000 N300 300mm belt width, total length 1750mm See video at: https://www.youtube.com/watch?v=M3vTeHvUob4

Lot 340 Endoline Model: 201 Serial: 96126302 Fully automatic erector and bottom taper run 12 cases per min. Size range L 200 min 600 max, W 200 min 480 max, H 175min 600 max, with bottom taper. See video at: https://www.youtube.com/watch?v=oKAA0_81jHw

Lot 319 Muvero Thermo oil cooking vessel Stainless, 2003, 250L, thermo-oil cooking vessel, up to 250'C temperature adjustable.

Lot 279 NNP Sorting conveyor Stainless conveyor, variable speed, first conveyor 3650mm x 300mm, second conveyor 1110mm x 300mm, 200mm gap inbetween two conveyors. See video at: http://www.youtube.com/watch?v=LX_VrthmAqY

Lot 210 Balpe SAS model: 9PL/20 serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature. See video at: http://www.youtube.com/watch?v=0KM0H9csFDU

Lot 163 Marpet fabrications Stainless S Bend conveyor Serial: 211209 2009, Stainless mobile frame, intralox mesh belt, 4200mm 1st leg to bend 1600mm 2nd leg from bend. Overall dimensions 300mmx4000mm

lot 113 Formaco meat former press Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press, votage/Hz 3x400/50, 16Amp

Lot 25 Apple engineering Pneumatic Depositor Model: MR150 2004 Stainless depositor with 75L horizontal paddle mixing hopper, 2-150gm on mobile height adjustable frame

Stainless can opener, pressure pad operated by hand or foot, mounted on stainless table 1200x600mm

Plastic 200mm wide slats 1200 and 900mm centre of straight sections to bend

200 L Stainless vessel, 2 top mounted paddle stirrers, vessel 45 degree sloped base to outlet

Ascon
Model: 1000
Year 2002

Automatic rotating

Afmeting 72 x 115 cm
Capacity 1000 kg

Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000

Automatic closing window

Hardened die plate

Platen press / Diecutter - clamp shell die cutter

Cauhe VA ( 1450 x 1850 mm )
Model VA
Year 2000

Automatic window

100 litres
2 KW<

Max 200kg
fully automatic
works on battery
operation tested

Approx 480mm blade length,
Easy start system, new in box

Approx 480mm blade length,
Easy start system, new in box

Approx 480mm blade length,
Easy start system, new in box

Approx 480mm blade length,
Easy start system, new in box

200 watts
22000 lumens

10x handrail brace 1200mm

Photo deviates from the configuration, which is described below.
1x MiTower platform
1x Fall protection
8x mounting frame 1000mm
Maximum height 4000mm
2x MiTower Stabilizer
10x handrail brace 1200mm
4x swivel wheel

Photo deviates from the configuration, which is described below.
1x MiTower platform
1x Fall protection
8x mounting frame 1000mm
Maximum height 4000mm
2x MiTower Stabilizer
10x handrail brace 1200mm
4x swivel wheel

Photo deviates from the configuration, which is described below.
1x MiTower platform
1x Fall protection
8x mounting frame 1000mm
Maximum height 4000mm
2x MiTower Stabilizer
10x handrail brace 1200mm
4x swivel wheel

<p>220V charger</p>
suitable for 2000m2/h
Brush 510mm
Tractor with suction head 850mm
50L tank

Heidelberg PM 52-2

Year 2006
Baldwin dampening
Rubberdoek wasinrichting
Semi automatic plate change
Impressions: ± 20mil

KRAUSS MAFFEI KM CX 420-4300

Number of operating hours: 37,589 hours

Screw diameter: 80 mm
Injection volume: 1810 cm3
Injection pressure: 2205 bar
Closing force: 420 T
Opening stroke: 1020 mm
Platform dimensions: 1270 x 1200 mm
Distance between columns: 800 x 800 mm
Maximum opening: 1400 mm
Hydraulic ejection stroke: 250 mm
Hydraulic ejection force: 95.4 KN

Oil tank capacity: 1075 L

Year 2021

Type: RC2E 20
Rated cooling capacity: 18.8 kW - 16,200 kcal/h
Pump flow: 55 L /min
Mint condition - 6 month warranty.

UNILOM MILACRON Blow moulding machine

Type BW20
Year 2009

Equipped with MOOG parison thickness control and accumulation head
Screw diameter: 90 mm
WK130 torpedo extrusion head with pre-accumulator
There is a stripping station and a robot
Sold with 1 mold of 20 liter water bottles and 3 other molds
This machine can produce 120 cans per hour

Injection moulding machine BILLION 200T Hercule
Year: 1998
Model: H780/200
Screw diameter: 50mm
Injection volume: 422 cm3
Injection pressure: 1843 bars
L/D: 22.3
Max locking force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Between vertical and horizontal columns: 610mm x 610mm
Column diameter: 100 mm
Maximum ejection stroke: 150 mm
Dimensions: 6.10 x 1.90 x 2.35m
Weight: 9.5T

BILLION 50 T PROXIMA press
Year: 2001
Model: H200/50
Screw diameter: 30 mm
Injection volume: 106 cm3
Injection pressure: 1910 bar
Maximum locking force: 500 KN
Dimensions of the trays: 580 mm x 520 mm
Min/max mold thickness: 180/360 mm
Dimensions: 3.52 x 1.17 x 1.72m
Weight: 3.5T

BILLION HERCULES H2000/320 - 320T

Year August 1999
Screw diameter: 80 mm
Injection volume: 1433 cm3
Passage between columns: 735 x 735 mm
Mold thickness: 330 to 680 mm
Weight: 16.5T
Dimensions: 7.88 x 2.02 x 2.60m
Sold with a Robot SEPRO 4030 stroke of 5500 mm visual 1 / year 2007

Machine: DEMAG 650T
Type: SYSTEM 650/1000-6400
Year: 2009
Command controls: NC5
Number of hours: 54,000 hours
Magnetic trays: Yes
Number of cores: 4
Robot interface: yes and equipped with a robot
Blowguns: 2
Heated zones: 24
Sequential: 8
Retractable column: yes
Screw diameter: 95 mm
Injection volume: 3367 cm3
Injectable weight: 3360 g
Injection pressure: 1895 bar
Electric dosing motor: Yes
Passage between column: 1000 x 900 mm
Tray dimensions: 1450 x 1350 mm
Magnetic trays: yes
Opening stroke: 930 mm
Mold thickness: 450 -950 mm
Dimensions: 11000 x 2500 x 2600mm
Weight: 25700 + 7800: 33500 kg

Souflleuse MOB 20 litres

Type: MOB 20 liters
Year: 1990 redone in 2000
Passage between column: 425 x 400 mm
Minimum thickness: 210 mm
Opening stroke: 660 mm
Screw diameter: 80 mm – L/D: 25 mm
Parison: 14 points
1 core