Drehdurchmesser über Bett: 1450 mm
Drehdurchmesser über Support: 1070 mm
Drehlänge: 7000 mm
Drehzahl: 2,24-450 U/min
Steuerung: Siemens
Planscheibe: 1400 mm
Spindeldurchlass: 160 mm
Lünette: 400 mm
Antriebsleistung - Werkstück: 63 kW
Reitstock:: elektr.
Pinolendurchmesser: 200 mm
Bettbreite: 950 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Posiweigh Triple200 Three lane linear weighing line, Serial: 3054, 2015, never been in production, weighing capacity up to 1000grams, suitable for dry, free flowing granular or piece type products, hopper capacity 120l, weighpan capacity 5l, two different discharge chutes for single drop of treble drop, comes with vibratory conveyor with 500kg hopper then feeds onto flighted elevator conveyor that feeds into the linear weigher and finally discharges onto a 3m indexing conveyor, supplied with a set of stainless steps, 1Ph

2008, Lsealer, sealing bars 560mm x 450mm, digital controls, mobile, 1Ph

Pentavac Penta2100 VFFS bagger, 2007, vertical form fill and seal machine, 300mm jaw width, adjustable temperature controls, with printer, touch screen controls, with outfeed conveyor, belt width 280mm, belt height 950mm, with four different forming sets, with manual and box of spares, 3Ph

Serial: 115464 Stainless twin lane metal detector, ferrous in foil head, belt dimensions 2100mm x 100mm, aperture 150mm x 160mm, with pneumatic blow reject into reject bin, bin full sensors, 3Ph

NNP mixing vessel Stainless 500l mixing vessel, jacketed, top mounted motor with agitation and scrape surface, central bottom discharge, 3Ph

Auriol M500VBEX cooking kettle, 3429 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Auriol M500VBEX cooking kettle, 3430 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Syspal 600HA2 Eurobin wash frame, 2021, stainless, SWL 50Kgs, 3Ph

Syspal Totebin hoist, Stainless tote bin hoist in guarded cage, 250Kgs safe working load, discharges at 2.5M, 3Ph (unused)

Fairfield Dalton mixing kettle, Stainless 150l mixing kettle, steam jacket, bottom mounted motor with agitation and scrape surface, side bottom discharge, 3Ph

Quinn holding tank, Stainless 150l holding vessel, inspection window at top, central bottom discharge, mobile

Vibtec Vibratory conveyor, Stainless vibratory conveyor, dimensions 1500mm x 160mm, on mobile frame, 1Ph

Stainless heated cabinet, three levels, max product 500mm L x 350mm W, adjustable temp control, 1Ph

Loypack One shot chocolate depositor, Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Nielsen 750L Chocolate kettle, 750L chocolate kettle, top mounted motor with agitation, variable speed, scrape surface, side bottom discharge, 3Ph

Stainless vertical multistage centrifugal pump, 7.5Kw, 50mm inlet and outlet, the motor includes a frequency converter and PI controller in the motor terminal box, this enables variable control of the motor speed, 3Ph (Unused)

2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)

Stainless, 50Kg hopper, belt dimensions 2200mm x 110mm, height of flights 30mm, missing motor and legs

Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Serial: SD150P5311297 Stainless, variable speed, height adjustable frame, 50l capacity mesh guarded hopper, roller conveyor at discharge point, comes with two different styles of nozzles, foot pedal, with manual

Presskraft: 40 to
Biegelänge: 1500 mm
Achsen: X und Y Achse
Hub: 100 mm
Einbauhöhe: 310 mm
Antriebskonzept: hydraulisch
Öltank: 38 l
Motor: 6 kW
Hinteranschlag: 420 mm
Matrize: 1
Geschwindigkeit: 10 mm/s
Rückzugsgeschwindigkeit: 12 mm/s
Hinteranschlaggeschwindigkeit: 40 mm/s
Genauigkeit Pressbalken: 0.02 +/- mm
Genauigkeit Hinteranschlag: 0.05 +/- mm
Länge: 2000 mm
Breite: 950 mm
Höhe: 1900 mm
Gewicht: 1800 kg

Stanzkraft: 55 to
Ausladung: 500 mm
Max. Durchmesser bei Blechstärke (Baustahl): 40 x 10 mm
Max. Hubzahl bei 20 mm Hub: 37 1/min
Motor: 5 kW
Länge: 1550 mm
Breite: 1200 mm
Höhe: 1950 mm
Gewicht: 1150 kg

Anzahl Achsen: 3 St.
Länge: 15,4 m
Gesamtgewicht: 48500 t
Breite: 2,75 m

Schnittdurchmesser: 540 mm
Sägebandlänge: 6700 mm
Schnittbreite: 610 mm
Hub: 1000 mm
Steuerung: NC
Bandgeschwindigkeit: 20-116 m/min
Säulendurchmesser: 150 mm
Gesamtleistungsbedarf: 11 kW
Maschinengewicht ca.: 3,6 t
Raumbedarf ca.: m

Ausladung: 3500 mm
Tragkraft in kg: 1000 kg
Schwenkbereich: mindestens 160 Grad
Höhe: 3000 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Tragkraft in kg: 2500 kg
Hub: 2900 mm
Gabellänge: . mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 3310 t
Raumbedarf ca.: m

Planscheibendurchmesser: 1400 mm
Umlaufdurchmesser: 1600 mm
Drehhöhe: 1500 mm
Steuerung: Siemens
Typ: 840 D
Werkstückgewicht: 6500 kg
Supportverschiebung senkrecht: 1000 mm
Drehzahl: 10-315 U/min
Vorschub: 3600 mm/min
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 1250 mm
Umlaufdurchmesser: 1500 mm
Drehhöhe: 1250 mm
Steuerung: Siemens
Typ: 840 Dsl
Werkzeugaufnahme: 4 Pos.
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 1200 mm
Umlaufdurchmesser: 1500 mm
Drehhöhe: 1300 mm
Supportverstellung: 800 mm
Seitensupport - Horizontalverstellung: 550 mm
Digitalanzeige: Heidenhain
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Drehdurchmesser: 820 mm
Drehlänge: 300 mm
Drehdurchmesser über Support: 465 mm
Drehmoment an der Spindel: 3000 Nm
Drehzahl: 5,6-1120 U/min
Vorschub: 1-5000 mm/min
Eilgang: 5000 mm/min
Reitstock-Pinolenaufnahme MK: 6
Dreibackenfutter Forckrath: mm
Lünette: mm
Hauptantriebsmotor: 50 kW
Hauptspindeldurchmesser: 170 mm
Spindeldurchlass: 128 mm
Reitstockpinolendurchmesser: 125 mm
Reitstockpinolenhub: 250 mm
z-Achse: 3000 mm
x-Achse: 550 mm
Gesamtleistungsbedarf: 52 kW
Maschinengewicht ca.: 7,1 t
Raumbedarf ca.: m

Ref.-Nr.: 18255
Hersteller: ENGEL
Baujahr: 2004

Schließeinheit
Schließkraft: 180 ton
Öffnungsweg: 750 mm
Holmmaß (h x v): 960 x830 mm
Einbauhöhe min.: 500 mm
Öffnungsweite: 1250 mm

Spritzeinheit
Schneckendurchmesser: 45 mm
Spritzvolumen: 318 cm³
Spritzgewicht PS: 302 gr
Spritzdruck: 1769/2360 bar

Maße und Gewichte
Maschinengewicht: 13500 Kg

Roboter
Marke: Wittman
Typ: W743
Baujahr: 2009

CHILLER GR2A 80/Z
Year: 2015
Very good state
Nominal cooling capacity: 77.5 kw - 66,600 kcal /h
Pump flow: 222 L/min
Excellent condition - 9 month warranty.
Net weight: 900 KG
Dimensions: 2200mm x 1450mm x 2200mm

Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm

Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm

2 hydraulic core pull

Dimensions:
4960 x 3656 x 3360mm

Weight: 14500KG

Hesta blow moulding machine in good condition
HESTA ST 502 extrusion blow molding machine
clamping force : 150 KN
Screw diameter: 50 mm / 22D
2 x 125mm
Speed: 300mm/sec
Shape thickness: 230-280mm
Maximum PE weight: 400 g
Machine weight: 3200 KG

BLOW MOLDING MACHINE BILLION P300
3 liters
Clamping force: 2 x 3.3 T
Closing stroke: 2 x 150 mm
Min mold thickness: 150mm
Platen Dimensions: Horizontal: 310mm x Vertical: 310mm
Screw diameter: 50mm
Screw stroke: 170 mm
Capacity per shot: 333 cm3
Pressure on the material: 1000 kg/cm2
L/D screw ratio: 15
Many spare parts supplied with the machine + several control cabinets + 1 set of molds

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 150
This PROCREA REV 150 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 1500 cc and weight of 5 gr. at 150 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 150 is very simple thanks to the automatic extraction system applied to the revolver.

2 head
Entraxe :100 mm
Volume max of the bottle : 0,5 l
Number of post: 1
Extrusion continuous
Nombre d'extrudeuses: 1
Screw diameter : 60 mm
Rapport L/D: 20
Parison thickness control : PROFILOG 32 point
Heating knife
Voltage : 380 V Triphase
Frequency : 50 Hz

SEPRO robot reference SR 4030 S3 visual in good condition
Year : April 2007
Weight of the robot : 900 KG
Weight of the command : 110 KG
Rated load : 12 kg

Strocke in X : 5500 mm
Strocke in Y : 800 mm
Strocke in Z : 1400 mm

CHILLER GRAC 250/Z
Year 2009
Nominal cooling capacity: 249 kw - 214.000 kcal /h
Pump flow: 710 L /min
Very good condition - 6 month warranty.
Weight : 2600 KG
Dimensions : 5500 mm x 1650 mm x 2300 mm

CHILLER GRAC 330/Z
Year 2006
Nominal cooling capacity: 328 kw - 282.000 kcal /h
Pump flow: 940 L /min
Very good condition - 6 month warranty.
Weight : 3400 KG
Dimensions : 5100 mm x 2150 mm x 2150 mm

Chiller INDUSTRIAL FRIGO type SIRE1 - 165/350 HP/Z/X With integrated energy saving system
Nominal cooling capacity: 164 KW - 141000 kcal/H
2 compressors 13,8 KW - max 24,5 KW
1 pump 10 KW - 470 L/min - 5,3 bars
Cooling capacity 175 KW - 151000 kcal/H
1 pump2 KW - 500 L/min - 1,7 bars
4 fans power of 1,3 KW - 65 000 m3/H
Internal capacity : 750 liters
Dimension : 3700 mm x 1100 mm x 2100 mm
Weight : 2300 KG

CHILLER brand DELTA PROCESS ALIZE 16 - 45 KW
Year 2002
In goog condition
Cooling power :45 KW
Voltage : 400 V
Frequency : 50 Hertz
Cooling liquid : R407C
Power install on the chiller : 15,74 kw

CHILLER brand PIOVAN CH 480 - 57 KW
Year 2015
In perfect condition - 7000 working hours
Cooling power : 57 KW
Voltage : 400 V
Frequency : 50 Hertz
Cooling liquid : R407C

PIOVAN RPA 800 mould dryer
Total power : 7,8 KW
Weight : 210 KG
Dimensions: 600 x 750 x 1500 mm
Year 2015 , in perfect condition , only 7000 working hours.

From 700 to 800 m3/h

For ambient temperature up to 45°C and humidity up to 90%
Easy maintenance
Compact footprint for installation close to primary machine on mezanine or floor.

Piovan Mould Dryers is ideal to prevent condensation in the mould area. They can operate in open or closed loop and for single or multiple machines.
Consistent dew point is assured by the PID control. Designed for fast start-up, do not need settings by operators.

They are ideally suited for:
• Mould enclosures of fast-cycle IMM’s
• Mould enclosures of blow moulding machines
• Mould enclosures and robot area of PET IMM’s

SEGHERS SMC 220 L thermal stripping system
Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters.
The combustion chamber is heated to approximately 420 degrees.
The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber.
Perfect cleaning for a cycle time of 90 to 150 min.
Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm
Dimensions of the basket: diameter 210 mm and length: 260 mm

SURFACE GRINDING MACHINE JONES & SHIPMAN
FORMAT 5-150

Vertical injection moulding machine REP super Sancar
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm

Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot