Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames

Hans Wahli stream feeder

complete with delivery belt

Polar RAB 4 Jogger

Year: 1998
With automatic side flaps and air removing roller

Polar 78 ES

Year 1996
Chrome air table
Complete with tools and spare knife

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP

Year: 2003

Beck packautomaten,

complete with shrink tunnel

Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,

2 x Hohner 48/5 S eyelet loop stitching heads

I'm good condition.
Price pro pice

GTS Countmaster 1053

With stoke inserter

230 volt
Max stack height: 140 mm
Max paper size: 350 x 600 mm
Min paper size: 45

Rietschle / Polar Blower

Year: 1993
Type: CEV 3709-D 5

Motor: 1.1 KW

Workingwidth 1500 mm

Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct

Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000

Automatic closing window

Hardened die plate

Heidelberg KSBA cilinder

Max size: 46x 58.5 cm
Die cutting cilinder with inking unit

Heidelberg PM 52-2

Year 2006
Baldwin dampening
Rubberdoek wasinrichting
Semi automatic plate change
Impressions: ± 20mil

Theisen en Bonitz Sprint HP 320

20 stations High pile collating machine
Complete with pumps

Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm

Polar 76 em

Size: 76 cm
With knife change tools and spare knife

Polar 76 EM Papercutter

Year: 1990
Cutting size: 76 cm

Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools

MBO B30E-1-76/4/4 Folding machine

PALLET FEEDER
COUNTER
SOUND HOOD
1ST UNIT 4 BUCKLES
2ND UNIT 4 BUCKLES
DELIVERY FA 82 ME ASP 66-2ME

Heidelberg Sm 52 Platepunch
Year: 2000

GKS 5 ton Heavy duty jack, hydraulic lifting jack, 2 pieces

GKS Schwerlastheber V5

GKS-PERFEKT hydraulic lifting devices meet the highest quality standards. They have been tried and tested worldwide for decades, they are robust and particularly durable. Our lifting devices / machine jacks are 100% checked and tested before delivery. In this way we guarantee perfect functionality. The customer receives a
Practical device for universal use at any location, whether in the company, in the workshop, in the open or in production

Polar 78 E

Cutting width: 78 cm
Year: 1996

Complete with knife change tools, spare knife and manual

Perfecta/ Knorr ABS 106 -3 R Destacker right

With rear shield

Built in 1994

Maximum format: 75 x 104 cm
Maximum stack height in one go: 16.5 cm
Stack height of pile max: 106 cm

Heidelberg A4 Tiegel

Baumann BA 7 S unloader

Type: Loader / unloader Baumann BA 7-S
Baumann BA-7 S large format
Format : 1.250 x 1.650 mm

Beck S 1450 Serienpacker

Year: 1996
Brand : Beck
Type: Serienpacker 1450

Rietschle SKG 314-2.02

Type: Side channel blower

Nominal pumping speed/volume flow: 420 m3/h
Max. vacuum: -195 mbar
Max pressure: +230 mbar
Nominal motor rating:4 KW
Nominal motor speed: 2850 /min

Horizon APC T 61
Complete with tools and spare knife

Polar Mohr pump / blower, Rietschle CEV 3709

Complete with solenoid valve

Polar 78 E

Year 1996
Chrome table with air
Complete with tools and spare knife
In good working condition

Screw compressor GRASSAIR RLR 30 22 KW

Year: 2005
Max pressure: 9.25 bar
Wieght: 600 kg
Kw: 22

Complete with: Oil Water Separators

Grassair compressed air tank/ receiver

Year: 1996
Max pressure:11 bar
Volume: 500 Liter

Polar RAB 4 jogger
Year 1998
Automatic flap left and right
Max paper format: up to 75 x 105 cm

Air pressing roller

IRAM 16 PAPER DRILL (4 heads)

YEAR 1996 (serial no 3131)

FOUR HEAD PAPER DRILL

FITTED WITH SAFETY GUARDS
THREE PHASE 380 volt POWER SUPPLY

ATS US 2000

The powerful, proven and universally applicable standard banding machine with ultrasonic technology.

With box of banding material

Perfecta/ Knorr ABS 106 -3 R Destacker right

With rear shield

Built in 1994

– Maximum format 75 x 104 cm
– Maximum stack height in one go: 16.5 cm
– Stack height max: 106 cm

Schneider Senator 78 E line

Press bar broken/ needs to be repaired

Sandt 150 ton die cutting machine

– Max format 1.53 x 1.1 meter
– Updated to modern safety standards

Poar D 66 ECO papercutter
Complete with tools and books
in good wokring condition
Year: 2020

Hyster E 3.00 XM

Year : 2007
Max. lifting capacity: 3 ton
Weight: ± 5170 kg
Fork lenght: 110 cm