BOBST SP 102 E

Year 1980
Hour counter: 28.950

achine speed 7500 sheets/hour, max. pressure 250 tons,
workable material: paper 80 - 90 g/m², solid board up to 2000 g/m²,
Can be inspected in production.

Nebiolo Atena

Die cutting machine
Max format: 26x76 cm

Polar Autocut AC25-XT Diecutter

For inline production of die-cut labels, buffering strips, label cutting, die-cutting, banding,
The system containes:
Polar Autocut AC25-XT, Polar Diecutter DC-11, Polar Bundler BD Bander,
More specs on request

Polar LW 1000-4 EV lift

Mobile Stack Lift POLAR LW 1000-4 + EV of 1999 (version with side margins for easy storage and material application)

The POLAR Stack Lift LW 1000-4 lift is predominantly employed for handling the medium-size format. Since the material to be cut is lifted automatically, the operator loads the material into the jogger or directly into the cutting machine at an ergonomic height. The lift can also be used for stacking the material. In this case the lift is lowered semi-automatically. This means that the procedure is started manually, but stopped automatically by the light barrier. As it is not necessary to anchor POLAR Stack Lift to the floor they can be easily rearranged.

Customer benefits

Increases the efficiency of the cutting machine by up to 10%, because working height remains constant throughout loading and unloading procedures

Lifting heavy loads is reduced to a minimumOperator's productivity curve remains constant

Substantial reduction of occupational diseases

Technical data

Pallet size : max.800 × 1,200 mm (31.50 × 47.24 in)

Size of platform : 840 × 1,270 mm (33.07 × 50.00 in)

Stroke : max.850 mm (33.46 in)

Lifting height : max. 85 cm

Carrying capacity : max.1,000 kg (2,205 lbs)

Net weight : 550 kg

Floor space (with pallet) : 144x130 cm – height : 150 cm (196 cm with max. lifting height)

Power : 0,75 kW

Renz AP 300 compact

Wiro punching machine
Year 2019

Samson 104 L pileturner

Lift capacity 1000 kg.
Min. pile height 320 mm (Including pallet).
Max. Pile height 1300 mm (Including pallet).
Min. paper size 450 mm x 320 mm
Max. Paper size 1200 mm x 800 mm
Power 400volts 3 phase
Weight: 725 kg

Theisen en Bonitz Sprint B312 VP ( 2008)

Year: 2008
- 12 stations
– format: min. 7x10cm, max. 35x50cm
– paper weight: 18-800g/qm

with Theisen en Bonitz 304 QSM

Theisen & Bonitz 304 QSM

Stitching and folding device:
– Motorized format setting
– 2 Hohner stitching heads
– Friction free Knife Fold (cloth system)
– Automatic layer thickness adjustment
– Front cutting device for cutting to 4 cm,
sections greater than 1.5 cm
– Head and foot trimming each from 3 to 20 mm at about 80 pages,
80 g / sqm.
– Power: 400 V, 50 Hz

Theisen and Bonitz Sprint B312 VP (2008)


12 stations half pile + 304 QSM three-cutter

Year of construction 2008

Round cornering machine polygraph

Knife radius R7
Robust quality

Stock A134R-R5PS6M / 1650 x 2050P Laming machine

Sheet to board laminating machine for producing displays and packing material

Horizon AC 8000 S collating machine

* collating stations
* suctions feeder
* jogger with cris cross

Sallmetal Laminating machine

S1050

Max Laminating size: 105 cm

Heidelberg GTP Hot Foil

size 34×46
with Hotfoil

Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Powered Feed Roller

Cutting Shear: 3 knife units
Creasing unit: 8 creasing units

GTS Countmaster 1053

With stoke inserter

230 volt
Max stack height: 140 mm
Max paper size: 350 x 600 mm
Min paper size: 45

Ascon
Model: 1000
Year 2002

Automatic rotating

Afmeting 72 x 115 cm
Capacity 1000 kg

Workingwidth 1500 mm

Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct

Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000

Automatic closing window

Hardened die plate

Paperplast international Dry 40

Format: 76x102

Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater

Theisen en Bonitz Sprint HP 320

20 stations High pile collating machine
Complete with pumps

Theisen & Bonitz 303 stitching unit
Equipped with 2 Hohner stitching heads and delivery belt.
Max format: 350 x 50 cm

Morgana Digifold Pro

Folding creasing machine

Muller Laconda 620

– 9 stations collating
– Folding stitching unit: HF 33 c
– complete wit pump
– Year 1990

Hentong ZKT 700 Window patching machine

Paper length 150-600 mm
Paper width: 200-690 mm
Film length 60-330 mm
Film width 30-380 mm

Machine dimensions: 4200 x 1400 x 1500 mm