7
Travail des métaux et machines-outilsMachines à travailler la tôle
Bending force: 300 toStroke: 500 mmDaylight: 700 mmDistance between columns: 2550 mmRapid speed: 20 mm/sWorking speed: 2 mm/sTable: 4.000 x 2.550 mmHorizontal movable cylinder: 1.9 mmHydraulicaly movable stand: 2.9 mmLength: 3550 mmWidth: 4000 mmHeight: 2600 mmWeight: 15000 kg
Bending force: 300 to
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 2550 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Table: 4.000 x 2.550 mm
Horizontal movable cylinder: 1.9 mm
Hydraulicaly movable stand: 2.9 mm
Length: 3550 mm
Width: 4000 mm
Height: 2600 mm
Weight: 15000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 2550 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Table: 4.000 x 2.550 mm
Horizontal movable cylinder: 1.9 mm
Hydraulicaly movable stand: 2.9 mm
Length: 3550 mm
Width: 4000 mm
Height: 2600 mm
Weight: 15000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôle
Bending force: 500 toStroke: 500 mmDaylight: 700 mmDistance between columns: 2550 mmRapid speed: 18 mm/sWorking speed: 3 mm/sTable: 5.000 x 2.550 mmHorizontal movable cylinder: 1.7 mmHydraulicaly movable stand: 3.6 mmLength: 5000 mmWidth: 5000 mmHeight: 3000 mmWeight: 32000 kg
Bending force: 500 to
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 2550 mm
Rapid speed: 18 mm/s
Working speed: 3 mm/s
Table: 5.000 x 2.550 mm
Horizontal movable cylinder: 1.7 mm
Hydraulicaly movable stand: 3.6 mm
Length: 5000 mm
Width: 5000 mm
Height: 3000 mm
Weight: 32000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 2550 mm
Rapid speed: 18 mm/s
Working speed: 3 mm/s
Table: 5.000 x 2.550 mm
Horizontal movable cylinder: 1.7 mm
Hydraulicaly movable stand: 3.6 mm
Length: 5000 mm
Width: 5000 mm
Height: 3000 mm
Weight: 32000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôle
Bending force: 600 toStroke: 500 mmDaylight: 700 mmDistance between columns: 2550 mmRapid speed: 18 mm/sWorking speed: 3 mm/sTable: 6.000 x 2.550 mmHorizontal movable cylinder: 2200 mmHydraulicaly movable stand: 4600 mmLength: 5000 mmWidth: 6000 mmHeight: 3000 mmWeight: 43000 kg
Bending force: 600 to
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 2550 mm
Rapid speed: 18 mm/s
Working speed: 3 mm/s
Table: 6.000 x 2.550 mm
Horizontal movable cylinder: 2200 mm
Hydraulicaly movable stand: 4600 mm
Length: 5000 mm
Width: 6000 mm
Height: 3000 mm
Weight: 43000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 500 mm
Daylight: 700 mm
Distance between columns: 2550 mm
Rapid speed: 18 mm/s
Working speed: 3 mm/s
Table: 6.000 x 2.550 mm
Horizontal movable cylinder: 2200 mm
Hydraulicaly movable stand: 4600 mm
Length: 5000 mm
Width: 6000 mm
Height: 3000 mm
Weight: 43000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsPressesPresses excentriques
Force de flexion : 160 à
Point de tonnage : 6 mm
Longueur table : 750 mm
Largeur table : 1100 mm
Trou dans la table : 230 mm
Course : 1 - 172 mm
Courses : 45 1/min
Guides de vérin : 6
Réglage du vérin : 100 mm
Trou de vérin : 80 mm
Profondeur de gorge : 375 mm
Lumière du jour : 540 mm
Moteur : 11kW
Longueur : 1890 mm
Largeur : 1950 mm
Hauteur : 3650 mm
Poids : 15500 kg
Force de flexion : 160 à
Point de tonnage : 6 mm
Longueur table : 750 mm
Largeur table : 1100 mm
Trou dans la table : 230 mm
Course : 1 - 172 mm
Courses : 45 1/min
Guides de vérin : 6
Réglage du vérin : 100 mm
Trou de vérin : 80 mm
Profondeur de gorge : 375 mm
Lumière du jour : 540 mm
Moteur : 11kW
Longueur : 1890 mm
Largeur : 1950 mm
Hauteur : 3650 mm
Poids : 15500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Point de tonnage : 6 mm
Longueur table : 750 mm
Largeur table : 1100 mm
Trou dans la table : 230 mm
Course : 1 - 172 mm
Courses : 45 1/min
Guides de vérin : 6
Réglage du vérin : 100 mm
Trou de vérin : 80 mm
Profondeur de gorge : 375 mm
Lumière du jour : 540 mm
Moteur : 11kW
Longueur : 1890 mm
Largeur : 1950 mm
Hauteur : 3650 mm
Poids : 15500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPerceuses et aléseuses
Drilling capacy mild steel: 50 mmSpindle cone: MK 5Distance spindle - column: 350 – 1.600 mmRevs: 56 – 1.450 (12) r.p.m.Tapping capacity: Steel/Cast: M40/M50Distance table - spindle underside: 465 – 1.420 mmautomatic feed: 0,06 – 0,2 (3) mm/minSpindle motor: 3.7 kWColumn diameter: 320 mmQuill travel: 270 mmTable: 2.550 x 970 x 200 mmElvating motor: 1 kWBox table dimensions: 630 x 500 x 500 mmmax. height: 2760 mmLength: 2670 mmWidth: 1120 mmHeight: 2410 mmWeight: 3300 kg
Drilling capacy mild steel: 50 mm
Spindle cone: MK 5
Distance spindle - column: 350 – 1.600 mm
Revs: 56 – 1.450 (12) r.p.m.
Tapping capacity: Steel/Cast: M40/M50
Distance table - spindle underside: 465 – 1.420 mm
automatic feed: 0,06 – 0,2 (3) mm/min
Spindle motor: 3.7 kW
Column diameter: 320 mm
Quill travel: 270 mm
Table: 2.550 x 970 x 200 mm
Elvating motor: 1 kW
Box table dimensions: 630 x 500 x 500 mm
max. height: 2760 mm
Length: 2670 mm
Width: 1120 mm
Height: 2410 mm
Weight: 3300 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Spindle cone: MK 5
Distance spindle - column: 350 – 1.600 mm
Revs: 56 – 1.450 (12) r.p.m.
Tapping capacity: Steel/Cast: M40/M50
Distance table - spindle underside: 465 – 1.420 mm
automatic feed: 0,06 – 0,2 (3) mm/min
Spindle motor: 3.7 kW
Column diameter: 320 mm
Quill travel: 270 mm
Table: 2.550 x 970 x 200 mm
Elvating motor: 1 kW
Box table dimensions: 630 x 500 x 500 mm
max. height: 2760 mm
Length: 2670 mm
Width: 1120 mm
Height: 2410 mm
Weight: 3300 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsPerceuses et aléseuses
Drilling capacy mild steel: 50 mmSpindle cone: MK 4Revs: 93 - 152 - 204 - 298 - 443 - 695 - 970 - 1.420 r.p.m.Tapping capacity: M35Length: 480 mmWidth: 755 mmHeight: 2265 mmWeight: 435 kg
Drilling capacy mild steel: 50 mm
Spindle cone: MK 4
Revs: 93 - 152 - 204 - 298 - 443 - 695 - 970 - 1.420 r.p.m.
Tapping capacity: M35
Length: 480 mm
Width: 755 mm
Height: 2265 mm
Weight: 435 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Spindle cone: MK 4
Revs: 93 - 152 - 204 - 298 - 443 - 695 - 970 - 1.420 r.p.m.
Tapping capacity: M35
Length: 480 mm
Width: 755 mm
Height: 2265 mm
Weight: 435 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsPerceuses et aléseuses
Drilling capacy mild steel: 25 mmSpindle cone: MK 3Distance spindle - column: 250 mmRevs: 120 - 6.000 (Stepless) r.p.m.Tapping capacity: M18 / M22max. drilling depth: 120 mmColumn diameter: 100 mmDistance spindle - table: 85 - 635 mmDistance spindle-base: 1.195 mmTable: 300 x 270 mmBase dimensions: 600 x 380 mmLength: 400 mmWidth: 655 mmHeight: 1185 mmWeight: 280 kg
Drilling capacy mild steel: 25 mm
Spindle cone: MK 3
Distance spindle - column: 250 mm
Revs: 120 - 6.000 (Stepless) r.p.m.
Tapping capacity: M18 / M22
max. drilling depth: 120 mm
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.195 mm
Table: 300 x 270 mm
Base dimensions: 600 x 380 mm
Length: 400 mm
Width: 655 mm
Height: 1185 mm
Weight: 280 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Spindle cone: MK 3
Distance spindle - column: 250 mm
Revs: 120 - 6.000 (Stepless) r.p.m.
Tapping capacity: M18 / M22
max. drilling depth: 120 mm
Column diameter: 100 mm
Distance spindle - table: 85 - 635 mm
Distance spindle-base: 1.195 mm
Table: 300 x 270 mm
Base dimensions: 600 x 380 mm
Length: 400 mm
Width: 655 mm
Height: 1185 mm
Weight: 280 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPressesPresses d'essai
Bending force: 100 toStroke: 300 mmDistance between columns: 1570 mmPiston diameter: 220x160 mmWorking speed: 5 mm/sRetraction speed: 10 mm/sLength: 2560 mmWidth: 1000 mmHeight: 2480 mmWeight: 1755 kg
Bending force: 100 to
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1755 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 300 mm
Distance between columns: 1570 mm
Piston diameter: 220x160 mm
Working speed: 5 mm/s
Retraction speed: 10 mm/s
Length: 2560 mm
Width: 1000 mm
Height: 2480 mm
Weight: 1755 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à cintrer les tuyauteries
Flexion modulus: 170 cm³Standard steel tube: 150 x 9 mmGas tube: 6" x 7,11 mmFurniture tube: 150 x 9 mmFE35 (for hydraulic tubes): 168,3 x 8,5 mmStainless steel AISI304-318: 141,3 x 6,55 mmStainless steel AISI308 (food industry): 141,3 x 6,55 mmBrass soft: 168,3 x 9 mmHard copper and aluminium: 168,3 x 9 mmSoft copper: 168,3 x 9 mmConduit tube (TAZ): 141,3 x 8 mmMepla, Gebereit and similar: 150 x 6 mmRoundbar solid (S275JO): 110 mmSquarebar solid (S275JO): 90 x 90 mmFlatsteel solid (S275JO): 120 x 60 mmSquare profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mmT-profile (S275JO): 120 x 120 x 10 mmU-profile (S275JO): 120 x 120 x 8 mmMax. bending radius: 800 mmMin. bending radius: 100 mmMin. tube Ø: 10 mmMax. bending speed: 1 r/minMotor: 15 kWLength: 1000 mmWidth: 1900 mmHeight: 1475 mmWeight: 2700 kg
Flexion modulus: 170 cm³
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Standard steel tube: 150 x 9 mm
Gas tube: 6" x 7,11 mm
Furniture tube: 150 x 9 mm
FE35 (for hydraulic tubes): 168,3 x 8,5 mm
Stainless steel AISI304-318: 141,3 x 6,55 mm
Stainless steel AISI308 (food industry): 141,3 x 6,55 mm
Brass soft: 168,3 x 9 mm
Hard copper and aluminium: 168,3 x 9 mm
Soft copper: 168,3 x 9 mm
Conduit tube (TAZ): 141,3 x 8 mm
Mepla, Gebereit and similar: 150 x 6 mm
Roundbar solid (S275JO): 110 mm
Squarebar solid (S275JO): 90 x 90 mm
Flatsteel solid (S275JO): 120 x 60 mm
Square profile (S275JO): 140 x 70 x 12 bzw. 140 x 140 x 6 mm
T-profile (S275JO): 120 x 120 x 10 mm
U-profile (S275JO): 120 x 120 x 8 mm
Max. bending radius: 800 mm
Min. bending radius: 100 mm
Min. tube Ø: 10 mm
Max. bending speed: 1 r/min
Motor: 15 kW
Length: 1000 mm
Width: 1900 mm
Height: 1475 mm
Weight: 2700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses
Diamètre de l'arbre : 100
Diamètre des rouleaux : 315 mm
Rouleaux entraînés : 3
Puissance moteur : 7,5 kW
Vitesse : 7 m/min
Position verticale de l'acier plat (section / diamètre min.) : 100x20 mm / 800 mm, 30x10 mm / 400 mm
Position horizontale en acier plat (section / diamètre min.) : 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Barre carrée (section / diamètre min.) : 60x60 mm / 750 mm, 15x15 mm / 400 mm
Barre ronde (section / diamètre min.) : Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / diamètre min.): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Position verticale du tube de forme (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Forme tube carré (section / diamètre min.) : 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Pied d'angle extérieur (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Pied d'angle intérieur (section / diamètre min.) : 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
Pied UPN extérieur (section / diamètre min.) : UPN 180 / 900 mm, UPN 30 / 400 mm
UPN pied intérieur (section / diamètre min.) : UPN 180 / 1.000 mm, UPN 30 / 400 mm
Position horizontale IPN (section / diamètre min.): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Longueur : 1465 mm
Largeur : 2000 mm
Hauteur : 1700 mm
Poids : 4000 kg
Diamètre de l'arbre : 100
Diamètre des rouleaux : 315 mm
Rouleaux entraînés : 3
Puissance moteur : 7,5 kW
Vitesse : 7 m/min
Position verticale de l'acier plat (section / diamètre min.) : 100x20 mm / 800 mm, 30x10 mm / 400 mm
Position horizontale en acier plat (section / diamètre min.) : 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Barre carrée (section / diamètre min.) : 60x60 mm / 750 mm, 15x15 mm / 400 mm
Barre ronde (section / diamètre min.) : Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / diamètre min.): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Position verticale du tube de forme (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Forme tube carré (section / diamètre min.) : 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Pied d'angle extérieur (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Pied d'angle intérieur (section / diamètre min.) : 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
Pied UPN extérieur (section / diamètre min.) : UPN 180 / 900 mm, UPN 30 / 400 mm
UPN pied intérieur (section / diamètre min.) : UPN 180 / 1.000 mm, UPN 30 / 400 mm
Position horizontale IPN (section / diamètre min.): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Longueur : 1465 mm
Largeur : 2000 mm
Hauteur : 1700 mm
Poids : 4000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Diamètre des rouleaux : 315 mm
Rouleaux entraînés : 3
Puissance moteur : 7,5 kW
Vitesse : 7 m/min
Position verticale de l'acier plat (section / diamètre min.) : 100x20 mm / 800 mm, 30x10 mm / 400 mm
Position horizontale en acier plat (section / diamètre min.) : 200x30 mm / 1.200 mm, 160x35 mm / 800 mm, 80x5 mm / 400 mm
Barre carrée (section / diamètre min.) : 60x60 mm / 750 mm, 15x15 mm / 400 mm
Barre ronde (section / diamètre min.) : Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
Tube (section / diamètre min.): Ø 125x2,5 mm / 1.400 mm, Ø 15x1 mm / 450 mm, Ø 4"x6,02 / 1.000 mm, Ø 1/2"x2,77 / 450 mm
Position verticale du tube de forme (Querschnitt / min. Durchmesser): 100x40x4 mm / 1.300 mm, 25x15x2 mm / 450 mm
Forme tube carré (section / diamètre min.) : 80x80x5 mm / 1.500 mm, 25x25x2 mm / 450 mm
Pied d'angle extérieur (Querschnitt / min. Durchmesser): 100x100x12 mm / 1.000 mm, 40x40x4 mm / 700 mm
Pied d'angle intérieur (section / diamètre min.) : 100x100x10 mm / 1.000 mm, 40x40x4 mm / 550 mm
Pied UPN extérieur (section / diamètre min.) : UPN 180 / 900 mm, UPN 30 / 400 mm
UPN pied intérieur (section / diamètre min.) : UPN 180 / 1.000 mm, UPN 30 / 400 mm
Position horizontale IPN (section / diamètre min.): IPN 180 / 1.000 mm, IPN 80 / 400 mm
Longueur : 1465 mm
Largeur : 2000 mm
Hauteur : 1700 mm
Poids : 4000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de bordage
Max. sheet thickness - mild steel: 8 mmMax. thickness - stainless steel: 5 mmMin. flanging radius: 10Max. blank diameter: 4500 mmMin. blank diameter: 720 mmMax. flanging height: 150 (R 100) / 190 (R 25) mmrotating speed: 0,35 - 0,68 m/sek.Motor: 11 kWLength: 4900 mmWidth: 1700 mmHeight: 2700 mmWeight: 4550 kg
Max. sheet thickness - mild steel: 8 mm
Max. thickness - stainless steel: 5 mm
Min. flanging radius: 10
Max. blank diameter: 4500 mm
Min. blank diameter: 720 mm
Max. flanging height: 150 (R 100) / 190 (R 25) mm
rotating speed: 0,35 - 0,68 m/sek.
Motor: 11 kW
Length: 4900 mm
Width: 1700 mm
Height: 2700 mm
Weight: 4550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. thickness - stainless steel: 5 mm
Min. flanging radius: 10
Max. blank diameter: 4500 mm
Min. blank diameter: 720 mm
Max. flanging height: 150 (R 100) / 190 (R 25) mm
rotating speed: 0,35 - 0,68 m/sek.
Motor: 11 kW
Length: 4900 mm
Width: 1700 mm
Height: 2700 mm
Weight: 4550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 860 mmDistance between centers: 1500 mmCentre height: 430 mmSpindle bore: 132 mmswing over cross slide: 620 mmWidth of bed: 560 mmSpindle nose / DIN55027: 11Spindle taper: 140 MSpindle speed steps: 17Spindle revs: Array rpmNumber of feeds: 150Longitudinal feed range: 0.039 - 18 mm/rCross feed range: 0.02 - 9 mm/rMetric thread range: 0.5 - 180 mmInch thread range: 60 - 1/6 TpiModule thread range: 0.125 - 45DP thread range: 240Cross slide travel: 435 mmTop slide travel: 150 mmTailstock quill diameter: 105 mmTailstock quill taper: 6 MKTailstock travel: 225 mmMotor power: 15 kWWeight: 4650 kg
Swing over bed: 860 mm
Distance between centers: 1500 mm
Centre height: 430 mm
Spindle bore: 132 mm
swing over cross slide: 620 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: Array rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: 240
Cross slide travel: 435 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4650 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 430 mm
Spindle bore: 132 mm
swing over cross slide: 620 mm
Width of bed: 560 mm
Spindle nose / DIN55027: 11
Spindle taper: 140 M
Spindle speed steps: 17
Spindle revs: Array rpm
Number of feeds: 150
Longitudinal feed range: 0.039 - 18 mm/r
Cross feed range: 0.02 - 9 mm/r
Metric thread range: 0.5 - 180 mm
Inch thread range: 60 - 1/6 Tpi
Module thread range: 0.125 - 45
DP thread range: 240
Cross slide travel: 435 mm
Top slide travel: 150 mm
Tailstock quill diameter: 105 mm
Tailstock quill taper: 6 MK
Tailstock travel: 225 mm
Motor power: 15 kW
Weight: 4650 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 400 mmDistance between centers: 750 mmCentre height: 200 mmSpindle bore: 52 mmswing over cross slide: 235 mmWidth of bed: 320 mmSpindle nose / DIN55027: 6Spindle taper: 6 MRevs continuous variable in gear steps: 4Revs continuous variable: 18-98, 48-265, 144-790, 385-2.120 U/min rpmNumber of feeds: 80Longitudinal feed range: 0.015 - 0.6 mm/rCross feed range: 0.0075 - 0.3 mm/rNumber of threads: 40Metric thread range: 0.25 - 7.5 mmInch thread range: 120 - 4 TpiModule thread range: 0.0625 - 1.875DP thread range: 16 - 480Cross slide travel: 235 mmTop slide travel: 110 mmTailstock quill diameter: 50 mmTailstock quill taper: 4 MKTailstock travel: 100 mmMotor power: 7.5 kWWeight: 1530 kg
Swing over bed: 400 mm
Distance between centers: 750 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 18-98, 48-265, 144-790, 385-2.120 U/min rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 16 - 480
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 7.5 kW
Weight: 1530 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 750 mm
Centre height: 200 mm
Spindle bore: 52 mm
swing over cross slide: 235 mm
Width of bed: 320 mm
Spindle nose / DIN55027: 6
Spindle taper: 6 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 18-98, 48-265, 144-790, 385-2.120 U/min rpm
Number of feeds: 80
Longitudinal feed range: 0.015 - 0.6 mm/r
Cross feed range: 0.0075 - 0.3 mm/r
Number of threads: 40
Metric thread range: 0.25 - 7.5 mm
Inch thread range: 120 - 4 Tpi
Module thread range: 0.0625 - 1.875
DP thread range: 16 - 480
Cross slide travel: 235 mm
Top slide travel: 110 mm
Tailstock quill diameter: 50 mm
Tailstock quill taper: 4 MK
Tailstock travel: 100 mm
Motor power: 7.5 kW
Weight: 1530 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 1320 mmDistance between centers: 1500 mmCentre height: 625 mmSpindle bore: 155 mmswing over cross slide: 940 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MRevs continuous variable in gear steps: 4Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 U/min rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 1/16 - 60 TpiModule thread range: 0.125 - 120DP thread range: 1 - 240Cross slide travel: 685 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmMotor power: 30 kWWeight: 8550 kg
Swing over bed: 1320 mm
Distance between centers: 1500 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 U/min rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 1/16 - 60 Tpi
Module thread range: 0.125 - 120
DP thread range: 1 - 240
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 U/min rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 1/16 - 60 Tpi
Module thread range: 0.125 - 120
DP thread range: 1 - 240
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 1320 mmDistance between centers: 1500 mmCentre height: 625 mmSpindle bore: 155 mmswing over cross slide: 940 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MSpindle speed steps: 5 - 1000Number of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120DP thread range: 1 - 240Cross slide travel: 685 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmWeight: 8550 kg
Swing over bed: 1320 mm
Distance between centers: 1500 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 5 - 1000
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 1 - 240
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 625 mm
Spindle bore: 155 mm
swing over cross slide: 940 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 5 - 1000
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 1 - 240
Cross slide travel: 685 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 1090 mmDistance between centers: 1500 mmCentre height: 500 mmSpindle bore: 155 mmswing over cross slide: 690 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MRevs continuous variable in gear steps: 4Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120DP thread range: 240Cross slide travel: 525 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmMotor power: 30 kWWeight: 8050 kg
Swing over bed: 1090 mm
Distance between centers: 1500 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
DP thread range: 240
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 8050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsTours
Swing over bed: 1090 mmDistance between centers: 1500 mmCentre height: 500 mmSpindle bore: 155 mmswing over cross slide: 690 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MSpindle speed steps: 24Spindle revs: Array rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120Cross slide travel: 525 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmWeight: 8050 kg
Swing over bed: 1090 mm
Distance between centers: 1500 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 500 mm
Spindle bore: 155 mm
swing over cross slide: 690 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Weight: 8050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 890 mmDistance between centers: 1500 mmCentre height: 400 mmSpindle bore: 155 mmswing over cross slide: 490 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MRevs continuous variable in gear steps: 4Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120Cross slide travel: 525 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmMotor power: 30 kWWeight: 7500 kg
Swing over bed: 890 mm
Distance between centers: 1500 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Revs continuous variable in gear steps: 4
Revs continuous variable: 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 30 kW
Weight: 7500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 890 mmDistance between centers: 1500 mmCentre height: 400 mmSpindle bore: 155 mmswing over cross slide: 490 mmWidth of bed: 700 mmSpindle nose / DIN55027: 15Spindle taper: 160 MSpindle speed steps: 24Spindle revs: Array rpmNumber of feeds: 160Longitudinal feed range: 0.032 - 38.9 mm/rCross feed range: 0.016 - 19.45 mm/rMetric thread range: 0.5 - 480 mmInch thread range: 60 - 1/16 TpiModule thread range: 0.125 - 120Cross slide travel: 525 mmTop slide travel: 270 mmTailstock quill diameter: 125 mmTailstock quill taper: 6 MKTailstock travel: 260 mmMotor power: 22 kWWeight: 7500 kg
Swing over bed: 890 mm
Distance between centers: 1500 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1500 mm
Centre height: 400 mm
Spindle bore: 155 mm
swing over cross slide: 490 mm
Width of bed: 700 mm
Spindle nose / DIN55027: 15
Spindle taper: 160 M
Spindle speed steps: 24
Spindle revs: Array rpm
Number of feeds: 160
Longitudinal feed range: 0.032 - 38.9 mm/r
Cross feed range: 0.016 - 19.45 mm/r
Metric thread range: 0.5 - 480 mm
Inch thread range: 60 - 1/16 Tpi
Module thread range: 0.125 - 120
Cross slide travel: 525 mm
Top slide travel: 270 mm
Tailstock quill diameter: 125 mm
Tailstock quill taper: 6 MK
Tailstock travel: 260 mm
Motor power: 22 kW
Weight: 7500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsTours
Swing over bed: 630 mmDistance between centers: 2000 mmCentre height: 315 mmSpindle bore: 103 mmswing over cross slide: 430 mmWidth of bed: 400 mmSpindle nose / DIN55027: 11Spindle taper: 120 MRevs continuous variable in gear steps: 3Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpmNumber of feeds: 120Longitudinal feed range: 0.04 - 12 mm/rCross feed range: 0.02 - 6 mm/rMetric thread range: 0.5 - 120 mmInch thread range: 060 - 1/4 TpiModule thread range: 0.125 - 30DP thread range: 1 - 240Cross slide travel: 315 mmTop slide travel: 130 mmTailstock quill diameter: 90 mmTailstock quill taper: 5 MKTailstock travel: 230 mmMotor power: 11 kWWeight: 3310 kg
Swing over bed: 630 mm
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: 1 - 240
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 2000 mm
Centre height: 315 mm
Spindle bore: 103 mm
swing over cross slide: 430 mm
Width of bed: 400 mm
Spindle nose / DIN55027: 11
Spindle taper: 120 M
Revs continuous variable in gear steps: 3
Revs continuous variable: 16 - 63, 63 - 250, 315 - 1.250 rpm
Number of feeds: 120
Longitudinal feed range: 0.04 - 12 mm/r
Cross feed range: 0.02 - 6 mm/r
Metric thread range: 0.5 - 120 mm
Inch thread range: 060 - 1/4 Tpi
Module thread range: 0.125 - 30
DP thread range: 1 - 240
Cross slide travel: 315 mm
Top slide travel: 130 mm
Tailstock quill diameter: 90 mm
Tailstock quill taper: 5 MK
Tailstock travel: 230 mm
Motor power: 11 kW
Weight: 3310 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsTours
Swing over bed: 325 mmDistance between centers: 1000 mmCentre height: 165 mmSpindle bore: 32 mmswing over cross slide: 190 mmWidth of bed: 200 mmSpindle nose / DIN55027: 5Spindle taper: 4 MSpindle speed steps: 12Spindle revs: Array rpmNumber of feeds: 48Longitudinal feed range: 0.006 - 1.77 mm/rCross feed range: 0.003 - 0.885 mm/rMetric thread range: 0.1 - 28 mmInch thread range: Array TpiModule thread range: 0.1 - 1.75DP thread range: 4 - 70Cross slide travel: 150 mmTop slide travel: 95 mmTailstock quill diameter: 40 mmTailstock quill taper: 3 MKTailstock travel: 100 mmMotor power: 2.2 kWWeight: 770 kg
Swing over bed: 325 mm
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: 4 - 70
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Weight: 770 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Distance between centers: 1000 mm
Centre height: 165 mm
Spindle bore: 32 mm
swing over cross slide: 190 mm
Width of bed: 200 mm
Spindle nose / DIN55027: 5
Spindle taper: 4 M
Spindle speed steps: 12
Spindle revs: Array rpm
Number of feeds: 48
Longitudinal feed range: 0.006 - 1.77 mm/r
Cross feed range: 0.003 - 0.885 mm/r
Metric thread range: 0.1 - 28 mm
Inch thread range: Array Tpi
Module thread range: 0.1 - 1.75
DP thread range: 4 - 70
Cross slide travel: 150 mm
Top slide travel: 95 mm
Tailstock quill diameter: 40 mm
Tailstock quill taper: 3 MK
Tailstock travel: 100 mm
Motor power: 2.2 kW
Weight: 770 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôleCisailles à section en acier
Punching power: 55 tonThroat depth: 500 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mmStroke: 20 mmStrokes: 37 1/minFlat steel: 300x15 / 200x20 mmNotcher: 10x42x90 mmMotor: 5 kWLength: 2100 mmWidth: 1160 mmHeight: 2090 mmWeight: 1750 kg
Punching power: 55 ton
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Throat depth: 500 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 bzw. 20/20 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 / 200x20 mm
Notcher: 10x42x90 mm
Motor: 5 kW
Length: 2100 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 6No. of driven linkage assemblies: 6Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 5550 mmLength with electrical shear: 6200 mmWidth: 1435 mmHeight: 1460 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity steel 400 N/mm²: 1.5 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.25 mmCutting capacity electrical shear: 1.25 - 1.5 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 2 kWLength with hand shear: 5550 mmLength with electrical shear: 6200 mmWidth: 1435 mmHeight: 1460 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity steel 400 N/mm²: 1.25 mm
Cutting capacity electrical shear: 1.25 - 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2 kW
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 6200 mmBending capacity Alu 190 N/mm²: 3 mmBending capacity steel 400 N/mm²: 2 mmNo. of stand and tension arm units: 10No. of driven linkage assemblies: 10Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmLength with hand shear: 6550 mmLength with electrical shear: 7200 mmWidth: 1435 mmHeight: 1460 mm
Bending length: 6200 mm
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 10
No. of driven linkage assemblies: 10
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 6550 mm
Length with electrical shear: 7200 mm
Width: 1435 mm
Height: 1460 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 10
No. of driven linkage assemblies: 10
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 6550 mm
Length with electrical shear: 7200 mm
Width: 1435 mm
Height: 1460 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 5020 mmBending capacity Alu 190 N/mm²: 3 mmBending capacity steel 400 N/mm²: 2 mmNo. of stand and tension arm units: 7No. of driven linkage assemblies: 7Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmLength with hand shear: 5550 mmLength with electrical shear: 6200 mmWidth: 1435 mmHeight: 1460 mm
Bending length: 5020 mm
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Length with hand shear: 5550 mm
Length with electrical shear: 6200 mm
Width: 1435 mm
Height: 1460 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending capacity Alu 190 N/mm²: 4 mmBending capacity steel 400 N/mm²: 3 mmNo. of stand and tension arm units: 6No. of driven linkage assemblies: 6Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2900 kg
Bending capacity Alu 190 N/mm²: 4 mm
Bending capacity steel 400 N/mm²: 3 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity steel 400 N/mm²: 3 mm
No. of stand and tension arm units: 6
No. of driven linkage assemblies: 6
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 4010 mmBending capacity Alu 190 N/mm²: 3 mmBending capacity steel 400 N/mm²: 2 mmNo. of stand and tension arm units: 7No. of driven linkage assemblies: 7Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2900 kg
Bending length: 4010 mm
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity Alu 190 N/mm²: 3 mm
Bending capacity steel 400 N/mm²: 2 mm
No. of stand and tension arm units: 7
No. of driven linkage assemblies: 7
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 4010 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.5 mmNo. of stand and tension arm units: 5No. of driven linkage assemblies: 5Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 3 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2900 kg
Bending length: 4010 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.5 mm
No. of stand and tension arm units: 5
No. of driven linkage assemblies: 5
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 3 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2900 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsPressesPresses excentriques
Bending force: 160 toTonnage rating point: 6 mmTable length: 1200 mmTable width: 650 mmHole in table: 200 mmStroke: 16 - 160 mmStrokes: 35 - 55 1/minRam: 740x420 mmRam guides: 8Ram adjustment: 100 mmThroat depth: 330 mmDistance between columns: 690 mmMotor: 15 kWLength: 1410 mmWidth: 2220 mmHeight: 3544 mmWeight: 16000 kg
Bending force: 160 to
Tonnage rating point: 6 mm
Table length: 1200 mm
Table width: 650 mm
Hole in table: 200 mm
Stroke: 16 - 160 mm
Strokes: 35 - 55 1/min
Ram: 740x420 mm
Ram guides: 8
Ram adjustment: 100 mm
Throat depth: 330 mm
Distance between columns: 690 mm
Motor: 15 kW
Length: 1410 mm
Width: 2220 mm
Height: 3544 mm
Weight: 16000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Tonnage rating point: 6 mm
Table length: 1200 mm
Table width: 650 mm
Hole in table: 200 mm
Stroke: 16 - 160 mm
Strokes: 35 - 55 1/min
Ram: 740x420 mm
Ram guides: 8
Ram adjustment: 100 mm
Throat depth: 330 mm
Distance between columns: 690 mm
Motor: 15 kW
Length: 1410 mm
Width: 2220 mm
Height: 3544 mm
Weight: 16000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 2035 mmSheet thickness (420 N/mm²): 4.5 mmSheet thickness (600 N/mm²): 3 mmMax. bending angle: 135 °Motor: 5.5 kWLength: 3300 mmWidth: 1550 mmHeight: 1900 mmWeight: 3200 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 4.5 mm
Sheet thickness (600 N/mm²): 3 mm
Max. bending angle: 135 °
Motor: 5.5 kW
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Sheet thickness (420 N/mm²): 4.5 mm
Sheet thickness (600 N/mm²): 3 mm
Max. bending angle: 135 °
Motor: 5.5 kW
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Force de flexion : 40 à
Longueur de pliage : 1500 mm
Axes : axes X et Y
vitesse rapide axe Y : 150 mm/s
Course : 160 mm
Distance intérieure entre les cadres latéraux : 1100 mm
Espace dans le cadre latéral : 320 mm
Lumière du jour : 390 mm
Concept de puissance : hydraulique
Vitesse de travail axe Y : 10
Axe X de la course de la butée arrière : 500 mm
Puissance moteur : 4 kW
Longueur : 1700 mm
Largeur : 1600 mm
Hauteur : 2230 mm
Poids : 3450kg
Force de flexion : 40 à
Longueur de pliage : 1500 mm
Axes : axes X et Y
vitesse rapide axe Y : 150 mm/s
Course : 160 mm
Distance intérieure entre les cadres latéraux : 1100 mm
Espace dans le cadre latéral : 320 mm
Lumière du jour : 390 mm
Concept de puissance : hydraulique
Vitesse de travail axe Y : 10
Axe X de la course de la butée arrière : 500 mm
Puissance moteur : 4 kW
Longueur : 1700 mm
Largeur : 1600 mm
Hauteur : 2230 mm
Poids : 3450kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Longueur de pliage : 1500 mm
Axes : axes X et Y
vitesse rapide axe Y : 150 mm/s
Course : 160 mm
Distance intérieure entre les cadres latéraux : 1100 mm
Espace dans le cadre latéral : 320 mm
Lumière du jour : 390 mm
Concept de puissance : hydraulique
Vitesse de travail axe Y : 10
Axe X de la course de la butée arrière : 500 mm
Puissance moteur : 4 kW
Longueur : 1700 mm
Largeur : 1600 mm
Hauteur : 2230 mm
Poids : 3450kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 30 toBending length: 1250 mmAxes: X and Y axisrapid speed Y-axis: 210 mm/sStroke: 150 mmInside distance between side frames: 1010 mmGap in side frame: 255 mmDaylight: 265 mmPower concept: hydraulicWorking speed Y-axis: 10Motor power: 3 kWLength: 1760 mmWidth: 1375 mmHeight: 2135 mmWeight: 1700 kg
Bending force: 30 to
Bending length: 1250 mm
Axes: X and Y axis
rapid speed Y-axis: 210 mm/s
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 1250 mm
Axes: X and Y axis
rapid speed Y-axis: 210 mm/s
Stroke: 150 mm
Inside distance between side frames: 1010 mm
Gap in side frame: 255 mm
Daylight: 265 mm
Power concept: hydraulic
Working speed Y-axis: 10
Motor power: 3 kW
Length: 1760 mm
Width: 1375 mm
Height: 2135 mm
Weight: 1700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôlePlieuses pivotantes
Bending length: 4010 mmBending capacity Alu 190 N/mm²: 2 mmBending capacity steel 400 N/mm²: 1.25 mmCutting capacity electrical shear: 1.25 mmNo. of stand and tension arm units: 4No. of driven linkage assemblies: 4Sheet insertion depth: 1130 mmOpening of upper beam: 180 mmWorking height: 915 mmMotor: 2.2 kWLength with hand shear: 4550 mmLength with electrical shear: 5200 mmWidth: 1435 mmHeight: 1460 mmWeight: 2600 kg
Bending length: 4010 mm
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity Alu 190 N/mm²: 2 mm
Bending capacity steel 400 N/mm²: 1.25 mm
Cutting capacity electrical shear: 1.25 mm
No. of stand and tension arm units: 4
No. of driven linkage assemblies: 4
Sheet insertion depth: 1130 mm
Opening of upper beam: 180 mm
Working height: 915 mm
Motor: 2.2 kW
Length with hand shear: 4550 mm
Length with electrical shear: 5200 mm
Width: 1435 mm
Height: 1460 mm
Weight: 2600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsMachines à travailler la tôleFreins de presse
Bending force: 100 toBending length: 2550 mmAxes: Y1 / Y2 / X axisrapid speed Y-axis: 180 mm/sStroke: 265 mmInside distance between side frames: 2200 mmGap in side frame: 450 mmDaylight: 530 mmPower concept: hydraulicWorking speed Y-axis: 10Retractionspeed Y-axis: 120Back gauge speed X-axis: 500Back gauge speed R-axis: 350 mm/sBack gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmOiltank: 100 lMotor power: 11 kWLength: 3800 mmWidth: 1670 mmHeight: 2850 mmWeight: 7800 kg
Bending force: 100 to
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
rapid speed Y-axis: 180 mm/s
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 2550 mm
Axes: Y1 / Y2 / X axis
rapid speed Y-axis: 180 mm/s
Stroke: 265 mm
Inside distance between side frames: 2200 mm
Gap in side frame: 450 mm
Daylight: 530 mm
Power concept: hydraulic
Working speed Y-axis: 10
Retractionspeed Y-axis: 120
Back gauge speed X-axis: 500
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Oiltank: 100 l
Motor power: 11 kW
Length: 3800 mm
Width: 1670 mm
Height: 2850 mm
Weight: 7800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôle
Suitable for plates: 1Suitable for tubes: 1Max. bevel width: 14 mmBevel angle: 30 °Spindle speed (load-free): 9 rpmPlate thickness: 6 - 40 mmMin. plate width: 55 mmMin. tube inner diameter: 100 mmFeed speed: 2600 mm/minMotor: 2.2 kWLength: 589 mmWidth: 541 mmHeight: 320 mmWeight: 65 kg
Suitable for plates: 1
Suitable for tubes: 1
Max. bevel width: 14 mm
Bevel angle: 30 °
Spindle speed (load-free): 9 rpm
Plate thickness: 6 - 40 mm
Min. plate width: 55 mm
Min. tube inner diameter: 100 mm
Feed speed: 2600 mm/min
Motor: 2.2 kW
Length: 589 mm
Width: 541 mm
Height: 320 mm
Weight: 65 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Suitable for tubes: 1
Max. bevel width: 14 mm
Bevel angle: 30 °
Spindle speed (load-free): 9 rpm
Plate thickness: 6 - 40 mm
Min. plate width: 55 mm
Min. tube inner diameter: 100 mm
Feed speed: 2600 mm/min
Motor: 2.2 kW
Length: 589 mm
Width: 541 mm
Height: 320 mm
Weight: 65 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18142Producer: DEMAGYear of construction: 1997Clamping unitClamping force: 50 tonOpening stroke: 400 mmDistance between tie bars: 355 x 355 mmMould height min.: 210 mmPlaten size (h x v): 540 x 540 mmInjection unitScrew diameter: 35 mmInjection volume: 106 cm³Shot weight: 95 gInjection pressure: 2573 barMeasurements and weightDimensions: 3,65 x 1,15 x 1,18 mMachine weight: 3600-2500 kg
Ref. no.: 18142
Producer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: DEMAG
Year of construction: 1997
Clamping unit
Clamping force: 50 ton
Opening stroke: 400 mm
Distance between tie bars: 355 x 355 mm
Mould height min.: 210 mm
Platen size (h x v): 540 x 540 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 106 cm³
Shot weight: 95 g
Injection pressure: 2573 bar
Measurements and weight
Dimensions: 3,65 x 1,15 x 1,18 m
Machine weight: 3600-2500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18138Producer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 850 mmDistance between tie bars: 370 X 3370 mmMould height min.: 200 mmMould height max.: 510 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 22 mmInjection volume: 37 cm³Shot weight: 32 gInjection pressure: 2580 barMeasurements and weightDimensions: 4,50 X 1,28 X 1,95 mMachine weight: 4750 kg
Ref. no.: 18138
Producer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 3370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 3370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection multi-composants
Ref. no.: 18092Producer: ENGELYear of construction: 2001Clamping unitClamping force: 300 tonOpening stroke: 855 mmPlaten size (h x v): 1050 x 650 mmInjection unitScrew diameter: 60 +35 mmInjection volume: 735 +135 cm³Shot weight: 662 + 122 gInjection pressure: 1834 +1620 barMeasurements and weightDimensions: 7,75 x 2,35 x 2,6 mMachine weight: 25250 kg
Ref. no.: 18092
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: ENGEL
Year of construction: 2001
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Platen size (h x v): 1050 x 650 mm
Injection unit
Screw diameter: 60 +35 mm
Injection volume: 735 +135 cm³
Shot weight: 662 + 122 g
Injection pressure: 1834 +1620 bar
Measurements and weight
Dimensions: 7,75 x 2,35 x 2,6 m
Machine weight: 25250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 17507Producer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg
Ref. no.: 17507
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producer: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 80 ton
Opening stroke: 450 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 200 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 168 cm³
Shot weight: 149 g
Injection pressure: 2020 bar
Measurements and weight
Dimensions: 4,1 x 1,4 x 2,0 m
Machine weight: 3700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Réf. n° : 16369
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
Réf. n° : 16369
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Producteur : BATTENFELD
Année de construction : 2005
Unité de serrage
Force de serrage : 75 tonnes
Course d'ouverture : 800 mm
Distance entre tirants : 405 x 405 mm
Hauteur moule min. : 150 mm
Hauteur max. du moule : 480 mm
Unité d'injection
Diamètre de vis : 18 mm
Volume injecté : 30 cm³
Poids du projectile : 27 g
Pression d'injection : 2440 bars
Mesures et poids
Dimensions : 4,5 x 1,7 x 2,0 m
Poids machine : 4500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Travail des métaux et machines-outilsAccessoires et pièces détachéesAutres
Deposit: 1000,00 EURPacket 1: 30 x 30 x 20 cm bei 20 kgPacket 2: 25 x 20 x 110 cm bei 19 kgcomplete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
Deposit: 1000,00 EUR
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Packet 1: 30 x 30 x 20 cm bei 20 kg
Packet 2: 25 x 20 x 110 cm bei 19 kg
complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsAccessoires et pièces détachéesTechnologie de mesure
Granite plate: 750/ 500/ 20,5 mmAluminium plate: 750/ 500/ 40 mmSpace requirement (W x D x H): 0,75 x 0,5 x 0,805 mWeight of machine: 370 kgCondition: very goodmeasuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
Granite plate: 750/ 500/ 20,5 mm
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Aluminium plate: 750/ 500/ 40 mm
Space requirement (W x D x H): 0,75 x 0,5 x 0,805 m
Weight of machine: 370 kg
Condition: very good
measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsFraiseusesAutres
X: 500 mmY: 360 mmZ: 400 mmSpeed range: 40 - 2000 rpmTaper fixture: SK 40 DIN2079Control: Heidenhain TNC 155Total power: 6 kWWeight of machine: 2000 kgSpace requirement (W x D x H): 2,8 x 2,9 x 1,9 mCondition: good, ready for operationunder power, ready for inspectionAccessory: docmentation
X: 500 mm
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Y: 360 mm
Z: 400 mm
Speed range: 40 - 2000 rpm
Taper fixture: SK 40 DIN2079
Control: Heidenhain TNC 155
Total power: 6 kW
Weight of machine: 2000 kg
Space requirement (W x D x H): 2,8 x 2,9 x 1,9 m
Condition: good, ready for operation
under power, ready for inspection
Accessory: docmentation
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Travail des métaux et machines-outilsPerceuses et aléseusesTaraudeuses
Table size: 260 x 290 mmTaper fixture: BohrfutterCoolant system: jaTotal power: 0,55 kWWeight of machine: 380 kgSpace requirement (W x D x H): 0,8 x 0,7 x 1,8 mwell-maintained machine ready for immediate useAccessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
Table size: 260 x 290 mm
Taper fixture: Bohrfutter
Coolant system: ja
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Taper fixture: Bohrfutter
Coolant system: ja
Total power: 0,55 kW
Weight of machine: 380 kg
Space requirement (W x D x H): 0,8 x 0,7 x 1,8 m
well-maintained machine ready for immediate use
Accessory: Various lead cartridges, pitch: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines d'emballageMachines d'emballage
Total power: 1,5 kWWeight of machine: 20,5 kgSpace requirement (W x D x H): 0,765 x 0,305 x 0,155 mHeating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
Total power: 1,5 kW
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 20,5 kg
Space requirement (W x D x H): 0,765 x 0,305 x 0,155 m
Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleMachines à poinçonner
Working pressure: min 6 - max. 7 barWeight of machine: 170 kgSpace requirement (W x D x H): 0,55 x 0,55 x 1,4 mCondition: very goodfor profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
Working pressure: min 6 - max. 7 bar
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 170 kg
Space requirement (W x D x H): 0,55 x 0,55 x 1,4 m
Condition: very good
for profile WICONA, system WICLINE 50E - 50EN, 60E, CODE:332.04.10, from vocational school, was hardly used, as new
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Autres machines
Load capacity: 27 kgWeight of machine: 100 kgSpace requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 mCondition: very goodGripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 mAccessory: no further accessories
Load capacity: 27 kg
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Weight of machine: 100 kg
Space requirement (W x D x H): 1,1 x 0,25 x 0,5 / 0,6 x 0,5 x 0,67 m
Condition: very good
Gripper/lifter for tools or other parts. The part weight can be adjusted for lifting and lowering. Functions: lifting/lowering, gripping, swivelling, gripper holder 0.42 x 0.5 m
Accessory: no further accessories
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Module solaire Maysun Solar, MSE-07 370 Wc - noir intégral, module mono PU, 1755 mm x 1038 mm x 30 mm, longueur du câble de raccordement 110 cm, collecte uniquement
Module solaire Maysun Solar, MSE-07 370 Wc - noir intégral, module mono PU, 1755 mm x 1038 mm x 30 mm, longueur du câble de raccordement 110 cm, collecte uniquement
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
9
Travail des métaux et machines-outilsMachines à souderRobots
Load capacity: 16 kgRange working radius: 1550 mmControl Modul: IRC5 M2004Robot version: IRB 2400/16 Type B - M2004Teach Panel: FlexPendantRemote I/O Unit: DSQC 350ANumber of axes: 6Total power: 1 kWWeight of machine: 800 kgSpace requirement (W x D x H): 0,73 x 0,6 x 1,6 mCondition: very goodWorking hour: 37095 hwell-kept robot, usable immediatelyAccessory: Documentation, all cables
Load capacity: 16 kg
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Range working radius: 1550 mm
Control Modul: IRC5 M2004
Robot version: IRB 2400/16 Type B - M2004
Teach Panel: FlexPendant
Remote I/O Unit: DSQC 350A
Number of axes: 6
Total power: 1 kW
Weight of machine: 800 kg
Space requirement (W x D x H): 0,73 x 0,6 x 1,6 m
Condition: very good
Working hour: 37095 h
well-kept robot, usable immediately
Accessory: Documentation, all cables
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.