6
Travail des métaux et machines-outilsPonceuses
Distance spindle - table: 610 mmTable: 600 x 300 mmGrinding area: 610 x 305 x 610 mmGrinding lenght: 610 mmMagnetic table: 300 x 600 mmTable movement hydraulic: 650 mmTable movement manual: 700 mmTable speed: 5 - 25 m/minCross feed rapid travel: 0 - 2,250 m/minAutomatic cross feed incremental: 3 - 32 mmMax. cross feed: 320 mmCross fine feed: 0.001 mmSpindle motor: 3.7 kWHydraulic motor: 0.74 kWCross feed motor: 1 kWFeed motor grinding wheel: 1 kWTotal power: 5 kWGrinding wheel dimensions: 355 x 50 x 127 mmSpindle speed: 1.45 U/minaut. feed: 0,001 - 0,04 mmRapid feed approx: 675 mm/minLength: 2950 mmWidth: 1490 mmHeight: 2080 mmWeight: 2200 kg
Distance spindle - table: 610 mm
Table: 600 x 300 mm
Grinding area: 610 x 305 x 610 mm
Grinding lenght: 610 mm
Magnetic table: 300 x 600 mm
Table movement hydraulic: 650 mm
Table movement manual: 700 mm
Table speed: 5 - 25 m/min
Cross feed rapid travel: 0 - 2,250 m/min
Automatic cross feed incremental: 3 - 32 mm
Max. cross feed: 320 mm
Cross fine feed: 0.001 mm
Spindle motor: 3.7 kW
Hydraulic motor: 0.74 kW
Cross feed motor: 1 kW
Feed motor grinding wheel: 1 kW
Total power: 5 kW
Grinding wheel dimensions: 355 x 50 x 127 mm
Spindle speed: 1.45 U/min
aut. feed: 0,001 - 0,04 mm
Rapid feed approx: 675 mm/min
Length: 2950 mm
Width: 1490 mm
Height: 2080 mm
Weight: 2200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Table: 600 x 300 mm
Grinding area: 610 x 305 x 610 mm
Grinding lenght: 610 mm
Magnetic table: 300 x 600 mm
Table movement hydraulic: 650 mm
Table movement manual: 700 mm
Table speed: 5 - 25 m/min
Cross feed rapid travel: 0 - 2,250 m/min
Automatic cross feed incremental: 3 - 32 mm
Max. cross feed: 320 mm
Cross fine feed: 0.001 mm
Spindle motor: 3.7 kW
Hydraulic motor: 0.74 kW
Cross feed motor: 1 kW
Feed motor grinding wheel: 1 kW
Total power: 5 kW
Grinding wheel dimensions: 355 x 50 x 127 mm
Spindle speed: 1.45 U/min
aut. feed: 0,001 - 0,04 mm
Rapid feed approx: 675 mm/min
Length: 2950 mm
Width: 1490 mm
Height: 2080 mm
Weight: 2200 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsPonceuses
Distance spindle - table: 600 mmTable: 610 x 305 mmGrinding area: 610 x 305 x 600 mmGrinding lenght: 610 mmMagnetic table: 300 x 600 mmTable movement hydraulic: 650 mmTable movement manual: 700 mmTable speed: 5 - 25 m/minCross feed rapid travel: 1.1 m/minAutomatic cross feed incremental: 1 - 12 mmMax. cross feed: 370 mmHydraulic motor: 1.5 kWCross feed motor: 0.004 kWFeed motor grinding wheel: 0.19 kWTotal power: 7 kWGrinding wheel dimensions: 355 x 50 x 127 mmSpindle speed: 1.45 U/minSpindle motor: 3 kWCrossfeed per handwheel revolution: 4 mmaut. feed: 0,002 - 0,04 mmFeed per handwheel revolution: 2 mmRapid feed approx: 330 mm/minLength: 2670 mmWidth: 1810 mmHeight: 2050 mmWeight: 2100 kg
Distance spindle - table: 600 mm
Table: 610 x 305 mm
Grinding area: 610 x 305 x 600 mm
Grinding lenght: 610 mm
Magnetic table: 300 x 600 mm
Table movement hydraulic: 650 mm
Table movement manual: 700 mm
Table speed: 5 - 25 m/min
Cross feed rapid travel: 1.1 m/min
Automatic cross feed incremental: 1 - 12 mm
Max. cross feed: 370 mm
Hydraulic motor: 1.5 kW
Cross feed motor: 0.004 kW
Feed motor grinding wheel: 0.19 kW
Total power: 7 kW
Grinding wheel dimensions: 355 x 50 x 127 mm
Spindle speed: 1.45 U/min
Spindle motor: 3 kW
Crossfeed per handwheel revolution: 4 mm
aut. feed: 0,002 - 0,04 mm
Feed per handwheel revolution: 2 mm
Rapid feed approx: 330 mm/min
Length: 2670 mm
Width: 1810 mm
Height: 2050 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Table: 610 x 305 mm
Grinding area: 610 x 305 x 600 mm
Grinding lenght: 610 mm
Magnetic table: 300 x 600 mm
Table movement hydraulic: 650 mm
Table movement manual: 700 mm
Table speed: 5 - 25 m/min
Cross feed rapid travel: 1.1 m/min
Automatic cross feed incremental: 1 - 12 mm
Max. cross feed: 370 mm
Hydraulic motor: 1.5 kW
Cross feed motor: 0.004 kW
Feed motor grinding wheel: 0.19 kW
Total power: 7 kW
Grinding wheel dimensions: 355 x 50 x 127 mm
Spindle speed: 1.45 U/min
Spindle motor: 3 kW
Crossfeed per handwheel revolution: 4 mm
aut. feed: 0,002 - 0,04 mm
Feed per handwheel revolution: 2 mm
Rapid feed approx: 330 mm/min
Length: 2670 mm
Width: 1810 mm
Height: 2050 mm
Weight: 2100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
_thumb.jpeg "Afficher l`annonce")
2_thumb.jpeg "Afficher l`annonce")
3_thumb.jpeg "Afficher l`annonce")
4_thumb.jpeg "Afficher l`annonce")
5_thumb.jpeg "Afficher l`annonce")
5
Machines d'impressionMachines de découpe
Wohlenberg 115 CutTec paper cutting guillotineAvailable immediately from stock.Description:– Color screen- Chromed air table– Positioning of items using the hand wheel– Optimized cutting cycle– Smoothly adjustable pressing pressure– Automated knife change from the front– Quick replacement of knives–Technical data:Cutting length: 1150 mmMaximum stack height: 165 mmInput depth: 1150 mm
Wohlenberg 115 CutTec paper cutting guillotine
Available immediately from stock.
Description:
– Color screen
- Chromed air table
– Positioning of items using the hand wheel
– Optimized cutting cycle
– Smoothly adjustable pressing pressure
– Automated knife change from the front
– Quick replacement of knives
–
Technical data:
Cutting length: 1150 mm
Maximum stack height: 165 mm
Input depth: 1150 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Available immediately from stock.
Description:
– Color screen
- Chromed air table
– Positioning of items using the hand wheel
– Optimized cutting cycle
– Smoothly adjustable pressing pressure
– Automated knife change from the front
– Quick replacement of knives
–
Technical data:
Cutting length: 1150 mm
Maximum stack height: 165 mm
Input depth: 1150 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
7
Machines d'impressionMachines de découpe
Wohlenberg 76 Paper Cutting Machine (1995)The Wohlenberg 76 paper cutting machine, built in 1995, is a reliable and accurate cutting solution for printing companies. With a cutting width of 76 cm and a maximum stacking height of 10 cm, this machine is ideal for processing various print formats. Equipped with hydraulic drive, a digital display, and extensive safety features, the Wohlenberg 76 offers both ease of use and safety. The machine weighs approximately 1500 kg, which contributes to its stability and precision.
Wohlenberg 76 Paper Cutting Machine (1995)
The Wohlenberg 76 paper cutting machine, built in 1995, is a reliable and accurate cutting solution for printing companies. With a cutting width of 76 cm and a maximum stacking height of 10 cm, this machine is ideal for processing various print formats. Equipped with hydraulic drive, a digital display, and extensive safety features, the Wohlenberg 76 offers both ease of use and safety. The machine weighs approximately 1500 kg, which contributes to its stability and precision.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
The Wohlenberg 76 paper cutting machine, built in 1995, is a reliable and accurate cutting solution for printing companies. With a cutting width of 76 cm and a maximum stacking height of 10 cm, this machine is ideal for processing various print formats. Equipped with hydraulic drive, a digital display, and extensive safety features, the Wohlenberg 76 offers both ease of use and safety. The machine weighs approximately 1500 kg, which contributes to its stability and precision.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
-1_thumb.jpeg "Afficher l`annonce")
-2_thumb.jpeg "Afficher l`annonce")
-3_thumb.jpeg "Afficher l`annonce")
-4_thumb.jpeg "Afficher l`annonce")
-5_thumb.jpeg "Afficher l`annonce")
-6_thumb.jpeg "Afficher l`annonce")
-7_thumb.jpeg "Afficher l`annonce")
7
Machines d'impressionMachine de sérigraphie
Brand: SakuraiModel: SC 72 AYear: 1990Format: 52 x 72 cmSpot coater
Brand: Sakurai
Model: SC 72 A
Year: 1990
Format: 52 x 72 cm
Spot coater
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Model: SC 72 A
Year: 1990
Format: 52 x 72 cm
Spot coater
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Machines d'impressionMachines d'impression
Heidelberg CX 102-4 sheetfed pressFormat: 72 x 102 cm, CP 2000, Wallscreen, Impress control, Presscenter instant gate, Presscenter net profiler, Alcolor dampening, Preset Plus Feeder, Preset Plus delivery, Technotrans Combistar Beta 140 L air cooled, Heidelberg washstar for blanket and impression cylinder and rollers, Powderspray, Software version S15B.27.00Machine nr: 550780, Impressions: 240 million
Heidelberg CX 102-4 sheetfed press
Format: 72 x 102 cm, CP 2000, Wallscreen, Impress control, Presscenter instant gate, Presscenter net profiler, Alcolor dampening, Preset Plus Feeder, Preset Plus delivery, Technotrans Combistar Beta 140 L air cooled, Heidelberg washstar for blanket and impression cylinder and rollers, Powderspray, Software version S15B.27.00
Machine nr: 550780, Impressions: 240 million
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Format: 72 x 102 cm, CP 2000, Wallscreen, Impress control, Presscenter instant gate, Presscenter net profiler, Alcolor dampening, Preset Plus Feeder, Preset Plus delivery, Technotrans Combistar Beta 140 L air cooled, Heidelberg washstar for blanket and impression cylinder and rollers, Powderspray, Software version S15B.27.00
Machine nr: 550780, Impressions: 240 million
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Travail des métaux et machines-outilsToursTours CNC
Swing diameter over cross slide: 480 mmSwing diameter over bed slide: 670 mmTurning length: 2000 mmSpeed range: 2800 rpmSpindle bore: 107 mmTurret: 12 -stationSpeed of driven tools: 2500 rpmDriven tools: yesCoolant system: jaChip conveyor: yesControl: Heidenhain CNC Pilot 3190Chucks: Roehm Ø 400 m jawsMachine on: 77517 hSpindle on: 28962 hTotal power: 38 kWWeight of machine: 10.000 kgSpace requirement (W x D x H): 7,6 x 5,4 x 1,9 mCondition: very goodMain drive motor overhauled 4 years ago, spindle new ball bearings, partially overhauled, machine is still being overhauled and will be ready in mid-November 2021Accessory: towable steady rest, towable tailstock, 4 pcs. driven tools (axial and radial)
Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor overhauled 4 years ago, spindle new ball bearings, partially overhauled, machine is still being overhauled and will be ready in mid-November 2021
Accessory: towable steady rest, towable tailstock, 4 pcs. driven tools (axial and radial)
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good
Main drive motor overhauled 4 years ago, spindle new ball bearings, partially overhauled, machine is still being overhauled and will be ready in mid-November 2021
Accessory: towable steady rest, towable tailstock, 4 pcs. driven tools (axial and radial)
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôle
pressing capacity: 200 toStroke: 500 mmTable: 2.000 x 1.550 mmDaylight: 800 mmRapid speed: 20 mm/sWorking speed: 2 mm/sCylinder fix or moveable: horizontal moveableDistance between columns: 1550 mmHorizontal movable cylinder: 1000 mmHydraulicaly movable stand: 1300 mmLength: 2400 mmWidth: 2000 mmHeight: 2600 mmWeight: 4800 kg
pressing capacity: 200 to
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsPonceuses
Grinding belt dimensions: 100 x 2.000 mmTube diameter: 20 - 76,1Hand lever adjustment: 1Motor power: 3 kWWeight: 190 kg
Grinding belt dimensions: 100 x 2.000 mm
Tube diameter: 20 - 76,1
Hand lever adjustment: 1
Motor power: 3 kW
Weight: 190 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Tube diameter: 20 - 76,1
Hand lever adjustment: 1
Motor power: 3 kW
Weight: 190 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
_1_thumb.jpeg "Afficher l`annonce")
_2_thumb.jpeg "Afficher l`annonce")
_3_thumb.jpeg "Afficher l`annonce")
_4_thumb.jpeg "Afficher l`annonce")
_5_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
8
Machines d'impressionMachines de découpe
Josting EFS 2800 big size cutterCutting width 2800 cmYear: 2006 –Chrome back table with air.–Knife chage tools
Josting EFS 2800 big size cutter
Cutting width 2800 cm
Year: 2006 –
Chrome back table with air.
–Knife chage tools
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Cutting width 2800 cm
Year: 2006 –
Chrome back table with air.
–Knife chage tools
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsPonceuses
Distance spindle - table: 600 mmTable: 600 x 300 mmGrinding lenght: 610 mmMagnetic table: 600 x 300 mmTable speed: 5 - 25 m/minCross feed rapid travel: 0 - 3000 m/minMax. cross feed: 350 mmAutomatic vertical feed: 440 mmRapid vertical feed approx.: 0 - 3000 mm/minFine vertical feed: 0.001 mmSpindle revs: 500 - 1800 rpmSpindle motor: 11 kWHydraulic motor: 2.2 kWTable height: 975 mmMax. workpiece weight on magnetic table: 195 kgMax. workpiece weight on t-slot table: 370 kgGrinding wheel dimensions: 355 x 50 x 127 mmServo-axis motors Y/Z: 1,1 / 1,1Length: 4020 mmWidth: 2450 mmHeight: 2080 mmTransport dimensions: 3400 x 2220 x 2530 mmWeight: 3700 kg
Distance spindle - table: 600 mm
Table: 600 x 300 mm
Grinding lenght: 610 mm
Magnetic table: 600 x 300 mm
Table speed: 5 - 25 m/min
Cross feed rapid travel: 0 - 3000 m/min
Max. cross feed: 350 mm
Automatic vertical feed: 440 mm
Rapid vertical feed approx.: 0 - 3000 mm/min
Fine vertical feed: 0.001 mm
Spindle revs: 500 - 1800 rpm
Spindle motor: 11 kW
Hydraulic motor: 2.2 kW
Table height: 975 mm
Max. workpiece weight on magnetic table: 195 kg
Max. workpiece weight on t-slot table: 370 kg
Grinding wheel dimensions: 355 x 50 x 127 mm
Servo-axis motors Y/Z: 1,1 / 1,1
Length: 4020 mm
Width: 2450 mm
Height: 2080 mm
Transport dimensions: 3400 x 2220 x 2530 mm
Weight: 3700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Table: 600 x 300 mm
Grinding lenght: 610 mm
Magnetic table: 600 x 300 mm
Table speed: 5 - 25 m/min
Cross feed rapid travel: 0 - 3000 m/min
Max. cross feed: 350 mm
Automatic vertical feed: 440 mm
Rapid vertical feed approx.: 0 - 3000 mm/min
Fine vertical feed: 0.001 mm
Spindle revs: 500 - 1800 rpm
Spindle motor: 11 kW
Hydraulic motor: 2.2 kW
Table height: 975 mm
Max. workpiece weight on magnetic table: 195 kg
Max. workpiece weight on t-slot table: 370 kg
Grinding wheel dimensions: 355 x 50 x 127 mm
Servo-axis motors Y/Z: 1,1 / 1,1
Length: 4020 mm
Width: 2450 mm
Height: 2080 mm
Transport dimensions: 3400 x 2220 x 2530 mm
Weight: 3700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsPonceuses
Distance spindle - table: 600 mmTable: 600 x 300 mmGrinding lenght: 610 mmMagnetic table: 600 x 300 mmTable speed: 0 - 20 m/minCross feed rapid travel: 0 - 3000 m/minMax. cross feed: 350 mmAutomatic vertical feed: 440 mmRapid vertical feed approx.: 0 - 3000 mm/minFine vertical feed: 0.001 mmSpindle revs: 500 - 1800 rpmSpindle motor: 11 kWTable height: 975 mmMax. workpiece weight on magnetic table: 195 kgMax. workpiece weight on t-slot table: 370 kgGrinding wheel dimensions: 355 x 50 x 127 mmServo-axis motors Y/Z: 1,1 / 1,1Servo-axis motor X: 3.9 kWLength: 3160 mmWidth: 2450 mmHeight: 2080 mmTransport dimensions: 3400 x 2200 x 2530 mmWeight: 4000 kg
Distance spindle - table: 600 mm
Table: 600 x 300 mm
Grinding lenght: 610 mm
Magnetic table: 600 x 300 mm
Table speed: 0 - 20 m/min
Cross feed rapid travel: 0 - 3000 m/min
Max. cross feed: 350 mm
Automatic vertical feed: 440 mm
Rapid vertical feed approx.: 0 - 3000 mm/min
Fine vertical feed: 0.001 mm
Spindle revs: 500 - 1800 rpm
Spindle motor: 11 kW
Table height: 975 mm
Max. workpiece weight on magnetic table: 195 kg
Max. workpiece weight on t-slot table: 370 kg
Grinding wheel dimensions: 355 x 50 x 127 mm
Servo-axis motors Y/Z: 1,1 / 1,1
Servo-axis motor X: 3.9 kW
Length: 3160 mm
Width: 2450 mm
Height: 2080 mm
Transport dimensions: 3400 x 2200 x 2530 mm
Weight: 4000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Table: 600 x 300 mm
Grinding lenght: 610 mm
Magnetic table: 600 x 300 mm
Table speed: 0 - 20 m/min
Cross feed rapid travel: 0 - 3000 m/min
Max. cross feed: 350 mm
Automatic vertical feed: 440 mm
Rapid vertical feed approx.: 0 - 3000 mm/min
Fine vertical feed: 0.001 mm
Spindle revs: 500 - 1800 rpm
Spindle motor: 11 kW
Table height: 975 mm
Max. workpiece weight on magnetic table: 195 kg
Max. workpiece weight on t-slot table: 370 kg
Grinding wheel dimensions: 355 x 50 x 127 mm
Servo-axis motors Y/Z: 1,1 / 1,1
Servo-axis motor X: 3.9 kW
Length: 3160 mm
Width: 2450 mm
Height: 2080 mm
Transport dimensions: 3400 x 2200 x 2530 mm
Weight: 4000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsAutres
MHG SMG 45 Sandstrahlanlage- Unterdruckstrahlkammer Höhe 550-700 mm- Innenraum / Breite 1100 mm- Innenraum / Tiefe 660 mm- Arbeitsrost bis 50 kg belastbar- Arbeitshandschuhe / Länge ca. 500mm (wechselbar)- 2x seitliche Türen verschließbar- Sichtfenster ca. 320x500mm (Sicherheitsglas)- Ein/Aus - Beleuchtung außen montiert/abgeschirmt- Ein/Aus Taster für Absaugventilator- FußpedalBaqu2s2oifj
MHG SMG 45 Sandstrahlanlage
- Unterdruckstrahlkammer Höhe 550-700 mm
- Innenraum / Breite 1100 mm
- Innenraum / Tiefe 660 mm
- Arbeitsrost bis 50 kg belastbar
- Arbeitshandschuhe / Länge ca. 500mm (wechselbar)
- 2x seitliche Türen verschließbar
- Sichtfenster ca. 320x500mm (Sicherheitsglas)
- Ein/Aus - Beleuchtung außen montiert/abgeschirmt
- Ein/Aus Taster für Absaugventilator
- Fußpedal
Baqu2s2oifj
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
- Unterdruckstrahlkammer Höhe 550-700 mm
- Innenraum / Breite 1100 mm
- Innenraum / Tiefe 660 mm
- Arbeitsrost bis 50 kg belastbar
- Arbeitshandschuhe / Länge ca. 500mm (wechselbar)
- 2x seitliche Türen verschließbar
- Sichtfenster ca. 320x500mm (Sicherheitsglas)
- Ein/Aus - Beleuchtung außen montiert/abgeschirmt
- Ein/Aus Taster für Absaugventilator
- Fußpedal
Baqu2s2oifj
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsPerceuses et aléseusesPerceuses radiales
DONAU DR 40z SchnellradialbohrmaschineTechnische Daten:- Bohrleistung ins volle Stahl ST 60: 40 mm- Bohrleistung GG 25: 50 mm- Gewindeschneiden ST60: M 33- Gewindeschneiden GG 25: M 45- Bohrspindelaufnahme: MK- Spindeldurchmesser: 55 mm- Pinolenhub: 200 mm- 18 Bohrspindeldrehzahlen 35-1800 U/min- Bohrvorschübe 0,075 - 0,60 mm/U- Höhenverstellung der Bohrsäule: 450 mm- Bohrradius min/max: 305 / 1005 mm- Tischgröße: 1200 x 600 mm- Antrieb 400 V / 6 kW- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm- Gewicht: ca.1800 kg
DONAU DR 40z Schnellradialbohrmaschine
Technische Daten:
- Bohrleistung ins volle Stahl ST 60: 40 mm
- Bohrleistung GG 25: 50 mm
- Gewindeschneiden ST60: M 33
- Gewindeschneiden GG 25: M 45
- Bohrspindelaufnahme: MK
- Spindeldurchmesser: 55 mm
- Pinolenhub: 200 mm
- 18 Bohrspindeldrehzahlen 35-1800 U/min
- Bohrvorschübe 0,075 - 0,60 mm/U
- Höhenverstellung der Bohrsäule: 450 mm
- Bohrradius min/max: 305 / 1005 mm
- Tischgröße: 1200 x 600 mm
- Antrieb 400 V / 6 kW
- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm
- Gewicht: ca.1800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Technische Daten:
- Bohrleistung ins volle Stahl ST 60: 40 mm
- Bohrleistung GG 25: 50 mm
- Gewindeschneiden ST60: M 33
- Gewindeschneiden GG 25: M 45
- Bohrspindelaufnahme: MK
- Spindeldurchmesser: 55 mm
- Pinolenhub: 200 mm
- 18 Bohrspindeldrehzahlen 35-1800 U/min
- Bohrvorschübe 0,075 - 0,60 mm/U
- Höhenverstellung der Bohrsäule: 450 mm
- Bohrradius min/max: 305 / 1005 mm
- Tischgröße: 1200 x 600 mm
- Antrieb 400 V / 6 kW
- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm
- Gewicht: ca.1800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsPonceusesMachines de rectification à boisseau conique
DELTA LF 350Vertikal - TopfschleifmaschineJxwrgaSteuerung - KonventionellSchleiflänge ca. 360mmSchleifbreite ca. 155mmSchleifhöhe ca. 300mmSpindeldrehzahl ca. 2800 U/minAntriebsleistung ca. 3 KWSchleifbewegung Rechts - Links manuellZ - Zustellung /manuellZubehörMagnetNassschleifeinrichtungMaschinenumhausungDokumentation2 x TopfscheibeAbzieheinrichtungSchleifscheibenschutzFeinzustellung - Z AchseAbmaßeL x B x H ca. 1000x1000x1800mmGewicht ca. 500kg
DELTA LF 350
Vertikal - Topfschleifmaschine
Jxwrga
Steuerung - Konventionell
Schleiflänge ca. 360mm
Schleifbreite ca. 155mm
Schleifhöhe ca. 300mm
Spindeldrehzahl ca. 2800 U/min
Antriebsleistung ca. 3 KW
Schleifbewegung Rechts - Links manuell
Z - Zustellung /manuell
Zubehör
Magnet
Nassschleifeinrichtung
Maschinenumhausung
Dokumentation
2 x Topfscheibe
Abzieheinrichtung
Schleifscheibenschutz
Feinzustellung - Z Achse
Abmaße
L x B x H ca. 1000x1000x1800mm
Gewicht ca. 500kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Vertikal - Topfschleifmaschine
Jxwrga
Steuerung - Konventionell
Schleiflänge ca. 360mm
Schleifbreite ca. 155mm
Schleifhöhe ca. 300mm
Spindeldrehzahl ca. 2800 U/min
Antriebsleistung ca. 3 KW
Schleifbewegung Rechts - Links manuell
Z - Zustellung /manuell
Zubehör
Magnet
Nassschleifeinrichtung
Maschinenumhausung
Dokumentation
2 x Topfscheibe
Abzieheinrichtung
Schleifscheibenschutz
Feinzustellung - Z Achse
Abmaße
L x B x H ca. 1000x1000x1800mm
Gewicht ca. 500kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsAutres
Kraftformer / ECKOLD KF 324 / incl. 3 Satz Werkzeuge-Ausladung - horizontal 340mm-Ausladung - vertikal 245mm-Arbeitshub 8mm-Arbeitstakte pro Minute 400-Leistung des Antriebsmotors 1,5 KW-Verformbare Blechdicke:-Stahl 400N/mm2 max: 2mm-Alu 250/mm2 max: 2,5mmBbw8Lxeib-Edelstahl/600N/mm2 max. 1,5mm-Stösselverstellung über HandradInclusive 3xWerkzeuge:-Spannwerkzeug kpl. LFS 60S-Z / Glättwerkzeug TP25 S /starr-Plastikformer kpl. PFW 60 S-Dokumentation-Maschine anschlussfertigAbmaße:LxBxH 1,4x0,8x1,7 MeterGewicht ca. 550Kg
Kraftformer / ECKOLD KF 324 / incl. 3 Satz Werkzeuge
-Ausladung - horizontal 340mm
-Ausladung - vertikal 245mm
-Arbeitshub 8mm
-Arbeitstakte pro Minute 400
-Leistung des Antriebsmotors 1,5 KW
-Verformbare Blechdicke:
-Stahl 400N/mm2 max: 2mm
-Alu 250/mm2 max: 2,5mm
Bbw8Lxeib
-Edelstahl/600N/mm2 max. 1,5mm
-Stösselverstellung über Handrad
Inclusive 3xWerkzeuge:
-Spannwerkzeug kpl. LFS 60S
-Z / Glättwerkzeug TP25 S /starr
-Plastikformer kpl. PFW 60 S
-Dokumentation
-Maschine anschlussfertig
Abmaße:
LxBxH 1,4x0,8x1,7 Meter
Gewicht ca. 550Kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
-Ausladung - horizontal 340mm
-Ausladung - vertikal 245mm
-Arbeitshub 8mm
-Arbeitstakte pro Minute 400
-Leistung des Antriebsmotors 1,5 KW
-Verformbare Blechdicke:
-Stahl 400N/mm2 max: 2mm
-Alu 250/mm2 max: 2,5mm
Bbw8Lxeib
-Edelstahl/600N/mm2 max. 1,5mm
-Stösselverstellung über Handrad
Inclusive 3xWerkzeuge:
-Spannwerkzeug kpl. LFS 60S
-Z / Glättwerkzeug TP25 S /starr
-Plastikformer kpl. PFW 60 S
-Dokumentation
-Maschine anschlussfertig
Abmaße:
LxBxH 1,4x0,8x1,7 Meter
Gewicht ca. 550Kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsSciageScies à courroies
Bandsäge -Bauer S300-Schnittleistung/Flach/ 90 Grad - 300mmDnxhnj-Sägebandlänge 3900x25x0,9mm-Bandgeschwindigkeit 20-70m/min-Stufenlose Schnittdruckregulierung-Gehrungsschnitteinrichtung-MaschinenrollenAbmaße: LxBxH2,3x1,3x1,5 Meter /Gewicht 550Kg
Bandsäge -Bauer S300
-Schnittleistung/Flach/ 90 Grad - 300mm
Dnxhnj
-Sägebandlänge 3900x25x0,9mm
-Bandgeschwindigkeit 20-70m/min
-Stufenlose Schnittdruckregulierung
-Gehrungsschnitteinrichtung
-Maschinenrollen
Abmaße: LxBxH
2,3x1,3x1,5 Meter /Gewicht 550Kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
-Schnittleistung/Flach/ 90 Grad - 300mm
Dnxhnj
-Sägebandlänge 3900x25x0,9mm
-Bandgeschwindigkeit 20-70m/min
-Stufenlose Schnittdruckregulierung
-Gehrungsschnitteinrichtung
-Maschinenrollen
Abmaße: LxBxH
2,3x1,3x1,5 Meter /Gewicht 550Kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsPerceuses et aléseusesPerceuses radiales haute vitesses
DONAU DR 23 / Schnellradialbohrmaschine-Bohrleistung / Stahl ca. 28mm-Ausladung 700mm-Spindelkonus MK3-Drehzahlbereich 70-1550 U/min / Getriebeschaltung-Vorschubbereich 0,075 - 0,3mm-Bohrtiefe 130mm-Gewindeschneideinrichtung-Hydraulische Klemmung-Seitliche Aufspannfläche für grössere Werkstücke-Bohrfutter-DokumentationAbmaße:LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
DONAU DR 23 / Schnellradialbohrmaschine
-Bohrleistung / Stahl ca. 28mm
-Ausladung 700mm
-Spindelkonus MK3
-Drehzahlbereich 70-1550 U/min / Getriebeschaltung
-Vorschubbereich 0,075 - 0,3mm
-Bohrtiefe 130mm
-Gewindeschneideinrichtung
-Hydraulische Klemmung
-Seitliche Aufspannfläche für grössere Werkstücke
-Bohrfutter
-Dokumentation
Abmaße:
LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
-Bohrleistung / Stahl ca. 28mm
-Ausladung 700mm
-Spindelkonus MK3
-Drehzahlbereich 70-1550 U/min / Getriebeschaltung
-Vorschubbereich 0,075 - 0,3mm
-Bohrtiefe 130mm
-Gewindeschneideinrichtung
-Hydraulische Klemmung
-Seitliche Aufspannfläche für grössere Werkstücke
-Bohrfutter
-Dokumentation
Abmaße:
LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsPressesFreins de presse
ATLANTIC HPA 30-135 / Guter Zustand unter Strom-Druckkraft 135 Tonnen-Abkantlänge 3050mm-Durchgang zwischen den Ständern 2550mm-Komplette Oberwange/Werkzeuge u. separate Segmente in verschiedenen Längen-Zwei Matritzen-Motorische Höhenverstellung-Hinteranschlag manuell-Frontauflage 2x-Fußschalter / Handschalter-unter Strom vorführbereitGxb82NmAbmaße:LxBxH 4x1,8x2,4Meter / Gewicht ca. 8,5 tonnen
ATLANTIC HPA 30-135 / Guter Zustand unter Strom
-Druckkraft 135 Tonnen
-Abkantlänge 3050mm
-Durchgang zwischen den Ständern 2550mm
-Komplette Oberwange/Werkzeuge u. separate Segmente in verschiedenen Längen
-Zwei Matritzen
-Motorische Höhenverstellung
-Hinteranschlag manuell
-Frontauflage 2x
-Fußschalter / Handschalter
-unter Strom vorführbereit
Gxb82Nm
Abmaße:
LxBxH 4x1,8x2,4Meter / Gewicht ca. 8,5 tonnen
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
-Druckkraft 135 Tonnen
-Abkantlänge 3050mm
-Durchgang zwischen den Ständern 2550mm
-Komplette Oberwange/Werkzeuge u. separate Segmente in verschiedenen Längen
-Zwei Matritzen
-Motorische Höhenverstellung
-Hinteranschlag manuell
-Frontauflage 2x
-Fußschalter / Handschalter
-unter Strom vorführbereit
Gxb82Nm
Abmaße:
LxBxH 4x1,8x2,4Meter / Gewicht ca. 8,5 tonnen
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Travail des métaux et machines-outilsFraiseusesMachines à tailler
Zahnrad Abwälzfräsmaschine LIEBHERR / LORENZ S800-Funktionsvideo au Anfrage-Max. Werkstück mit Gegenhalter 600mm-Max. Werkstück mit zurückgezogenem Gegenhalter 800mm-Max. Weg des Frässchlittens 360mm-Grösste fräsbare Teilung bei grösstem Werkstück 5Pi im normalen Leistungsbereich 8Pi-Aufnahmekegel / Frässpindel MK5-Fräsdorn 22/27/32/40mm-Max. Fräserdurchmesser 186mm-Max. Fräserlänge 170mm-Max. Fräserverschiebung 80mm-Fräserdrehzahlen 40-220 U/min-Vorschübe stufenlos regelbar / Vertikal-Vorschübe stufenlos regelbar / Horizontal-Vorschübe stufenlos regelbar /Tangential-Aufspanntisch ohne wasserrand 550mm-Aufspanntischbohrung 100mm-Aufspannkegeldorn MK 5-Aufspanndorn 36mmZUBEHÖR:-1xPalette Wechselräder-1xPalette Abwälzfräser-1xPalette Aufspanndorne-Dokumentation / MaschinenfüßeAbmaße:LxBxH 3,6x1,8x1,9 Meter / Gewicht 5500KgWon93G8C
Zahnrad Abwälzfräsmaschine LIEBHERR / LORENZ S800
-Funktionsvideo au Anfrage
-Max. Werkstück mit Gegenhalter 600mm
-Max. Werkstück mit zurückgezogenem Gegenhalter 800mm
-Max. Weg des Frässchlittens 360mm
-Grösste fräsbare Teilung bei grösstem Werkstück 5Pi im normalen Leistungsbereich 8Pi
-Aufnahmekegel / Frässpindel MK5
-Fräsdorn 22/27/32/40mm
-Max. Fräserdurchmesser 186mm
-Max. Fräserlänge 170mm
-Max. Fräserverschiebung 80mm
-Fräserdrehzahlen 40-220 U/min
-Vorschübe stufenlos regelbar / Vertikal
-Vorschübe stufenlos regelbar / Horizontal
-Vorschübe stufenlos regelbar /Tangential
-Aufspanntisch ohne wasserrand 550mm
-Aufspanntischbohrung 100mm
-Aufspannkegeldorn MK 5
-Aufspanndorn 36mm
ZUBEHÖR:
-1xPalette Wechselräder
-1xPalette Abwälzfräser
-1xPalette Aufspanndorne
-Dokumentation / Maschinenfüße
Abmaße:
LxBxH 3,6x1,8x1,9 Meter / Gewicht 5500Kg
Won93G8C
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
-Funktionsvideo au Anfrage
-Max. Werkstück mit Gegenhalter 600mm
-Max. Werkstück mit zurückgezogenem Gegenhalter 800mm
-Max. Weg des Frässchlittens 360mm
-Grösste fräsbare Teilung bei grösstem Werkstück 5Pi im normalen Leistungsbereich 8Pi
-Aufnahmekegel / Frässpindel MK5
-Fräsdorn 22/27/32/40mm
-Max. Fräserdurchmesser 186mm
-Max. Fräserlänge 170mm
-Max. Fräserverschiebung 80mm
-Fräserdrehzahlen 40-220 U/min
-Vorschübe stufenlos regelbar / Vertikal
-Vorschübe stufenlos regelbar / Horizontal
-Vorschübe stufenlos regelbar /Tangential
-Aufspanntisch ohne wasserrand 550mm
-Aufspanntischbohrung 100mm
-Aufspannkegeldorn MK 5
-Aufspanndorn 36mm
ZUBEHÖR:
-1xPalette Wechselräder
-1xPalette Abwälzfräser
-1xPalette Aufspanndorne
-Dokumentation / Maschinenfüße
Abmaße:
LxBxH 3,6x1,8x1,9 Meter / Gewicht 5500Kg
Won93G8C
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2550 mmMax. bending capacity - mild steel: 15Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mmMax. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mmUpper roll diameter: 270 mmLower roll diameter: 270 mmLateral roll diameter: 230 mmMax. opening: 50 mmWorking height: 1155 mmMotor power: 15 kWLength: 4760 mmWidth: 1660 mmHeight: 1155 mmWeight: 8950 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 15
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 4760 mm
Width: 1660 mm
Height: 1155 mm
Weight: 8950 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 15
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 4760 mm
Width: 1660 mm
Height: 1155 mm
Weight: 8950 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
13
Machines de traitement du plastiqueMachines de moulage par injection
Ref. no.: 17148Hersteller: ENGELYear of construction: 2008Clamping unitClamping force: 400 tonOpening width: 1008 mmPlaten size (h x v): 1300 x 1460 mmInjection unitScrew diameter: 50 + 18 + 25 + 25 + 25 + 25 mmInjection volume: 422 + 38 + 54 + 54 + 54 +54 cm³Shot weight: 380 + 35 + 48 +48 + 48 + 48 gInjection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 barMeasurements and weightMachine weight: 22000 + 6600 kgDimensions LxWxH part 1: 5 x 2,3 x mDimensions LxWxH part 2: 3,9 x 2,3 x m
Ref. no.: 17148
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm
Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Hersteller: ENGEL
Year of construction: 2008
Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm
Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar
Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
12
Machines de traitement du plastiqueMachines de moulage par injection
Ref. no.: 17146Hersteller: ENGELYear of construction: 2004Clamping unitClamping force: 300 tonOpening stroke: 855 mmInjection unitScrew diameter: 50 + 25 mmInjection volume: 393 + 49 cm³Shot weight: 354 + 44 gInjection pressure: 1917 + 1586 barMeasurements and weightDimensions: 6,5 x 2,3 x mMachine weight: 21000 kg
Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Hersteller: ENGEL
Year of construction: 2004
Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm
Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar
Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
10
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18333Hersteller: DEMAGYear of construction: 1998Clamping unitClamping force: 330 tonOpening stroke: 675 mmDistance between tie bars: 710 x 630 mmMould height min.: 330 mmMould height max.: 710 mmPlaten size (h x v): 1040 X 950 mmInjection unitScrew diameter: 50 mmInjection volume: 530 cm³Shot weight: 480 gInjection pressure: 2426 barMeasurements and weightDimensions: 6,5 X 2,0 X 2,3 mMachine weight: 14500 kg
Ref. no.: 18333
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar
Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Hersteller: DEMAG
Year of construction: 1998
Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm
Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar
Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18331Hersteller: ARBURGYear of construction: 2001Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 320 x 320 mmMould height min.: 225 mmOpening width: 575 mmPlaten size (h x v): 446 x446 mmInjection unitScrew diameter: 25 mmInjection volume: 54 cm³Shot weight: 49 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,5 x 12 x 1,9 mMachine weight: 2250 kg
Ref. no.: 18331
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Hersteller: ARBURG
Year of construction: 2001
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Machines de traitement du plastiqueMachines de moulage par injectionMachines de moulage par injection de plastique
Ref. no.: 18330Hersteller: ARBURGYear of construction: 2003Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 320 X 320 mmMould height min.: 225 mmMould height max.: 575 mmPlaten size (h x v): 446 X 446 mmInjection unitScrew diameter: 25 + 15 mmInjection volume: 39 + 20 cm³Shot weight: 35 + 18 gInjection pressure: 2210 barMeasurements and weightDimensions: 3,5 X 1,2 x 1,9 mMachine weight: 2250 kg
Ref. no.: 18330
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar
Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Hersteller: ARBURG
Year of construction: 2003
Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm
Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar
Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
5
Machines d'impressionImpression numérique
The Vutek GS3250 LX UV Printer (Year 2015)The Vutek GS3250 LX UV Printer, manufactured in 2015, is a versatile and robust printing solution designed to meet the demanding needs of modern printing businesses. This high-performance printer is renowned for its exceptional print quality, speed, and versatility, making it an ideal choice for various printing applications.Key Features:Advanced UV LED TechnologyEnergy Efficient: Utilizes UV LED curing technology, significantly reducing energy consumption compared to traditional UV curing methods.Eco-Friendly: Produces less heat and eliminates VOCs (Volatile Organic Compounds), ensuring a safer and more environmentally friendly printing process.Superior Print QualityHigh Resolution: Capable of delivering stunning print resolutions up to 1000 dpi, ensuring sharp, vibrant, and detailed images.Wide Color Gamut: Utilizes a wide color gamut with multi-layer white ink printing capability, enhancing the vibrancy and depth of colors.VersatilityMedia Compatibility: Supports a diverse range of media types, including rigid substrates up to 2 inches thick and flexible materials, making it suitable for various applications such as signage, banners, posters, and displays.Large Format: Boasts a generous maximum print width of 126.5 inches (3.2 meters), allowing for large format prints without compromising on quality.Efficiency and ProductivityHigh Speed: Delivers impressive printing speeds up to 2400 square feet per hour, enabling fast turnaround times and increased productivity.Continuous Printing: Features automated media handling and continuous printing capabilities, minimizing downtime and maximizing workflow efficiency.User-Friendly OperationIntuitive Interface: Equipped with a user-friendly interface and advanced software, making it easy to operate and manage print jobs.Remote Monitoring: Offers remote monitoring capabilities, allowing operators to oversee the printing process and troubleshoot issues from a distance.Specifications:Print Technology: UV LED CuringMaximum Print Width: 126.5 inches (3.2 meters)Print Resolution: Up to 1000 dpiPrint Speed: Up to 2400 sq ft/hourMedia Thickness: Up to 2 inchesYear of Manufacture: 2015The Vutek GS3250 LX UV Printer is a powerful addition to any printing operation, combining cutting-edge technology with exceptional performance. Its ability to handle a wide variety of print jobs with precision and efficiency makes it a valuable asset for businesses looking to expand their printing capabilities and deliver high-quality results to their clients.
The Vutek GS3250 LX UV Printer (Year 2015)
The Vutek GS3250 LX UV Printer, manufactured in 2015, is a versatile and robust printing solution designed to meet the demanding needs of modern printing businesses. This high-performance printer is renowned for its exceptional print quality, speed, and versatility, making it an ideal choice for various printing applications.
Key Features:
Advanced UV LED Technology
Energy Efficient: Utilizes UV LED curing technology, significantly reducing energy consumption compared to traditional UV curing methods.
Eco-Friendly: Produces less heat and eliminates VOCs (Volatile Organic Compounds), ensuring a safer and more environmentally friendly printing process.
Superior Print Quality
High Resolution: Capable of delivering stunning print resolutions up to 1000 dpi, ensuring sharp, vibrant, and detailed images.
Wide Color Gamut: Utilizes a wide color gamut with multi-layer white ink printing capability, enhancing the vibrancy and depth of colors.
Versatility
Media Compatibility: Supports a diverse range of media types, including rigid substrates up to 2 inches thick and flexible materials, making it suitable for various applications such as signage, banners, posters, and displays.
Large Format: Boasts a generous maximum print width of 126.5 inches (3.2 meters), allowing for large format prints without compromising on quality.
Efficiency and Productivity
High Speed: Delivers impressive printing speeds up to 2400 square feet per hour, enabling fast turnaround times and increased productivity.
Continuous Printing: Features automated media handling and continuous printing capabilities, minimizing downtime and maximizing workflow efficiency.
User-Friendly Operation
Intuitive Interface: Equipped with a user-friendly interface and advanced software, making it easy to operate and manage print jobs.
Remote Monitoring: Offers remote monitoring capabilities, allowing operators to oversee the printing process and troubleshoot issues from a distance.
Specifications:
Print Technology: UV LED Curing
Maximum Print Width: 126.5 inches (3.2 meters)
Print Resolution: Up to 1000 dpi
Print Speed: Up to 2400 sq ft/hour
Media Thickness: Up to 2 inches
Year of Manufacture: 2015
The Vutek GS3250 LX UV Printer is a powerful addition to any printing operation, combining cutting-edge technology with exceptional performance. Its ability to handle a wide variety of print jobs with precision and efficiency makes it a valuable asset for businesses looking to expand their printing capabilities and deliver high-quality results to their clients.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
The Vutek GS3250 LX UV Printer, manufactured in 2015, is a versatile and robust printing solution designed to meet the demanding needs of modern printing businesses. This high-performance printer is renowned for its exceptional print quality, speed, and versatility, making it an ideal choice for various printing applications.
Key Features:
Advanced UV LED Technology
Energy Efficient: Utilizes UV LED curing technology, significantly reducing energy consumption compared to traditional UV curing methods.
Eco-Friendly: Produces less heat and eliminates VOCs (Volatile Organic Compounds), ensuring a safer and more environmentally friendly printing process.
Superior Print Quality
High Resolution: Capable of delivering stunning print resolutions up to 1000 dpi, ensuring sharp, vibrant, and detailed images.
Wide Color Gamut: Utilizes a wide color gamut with multi-layer white ink printing capability, enhancing the vibrancy and depth of colors.
Versatility
Media Compatibility: Supports a diverse range of media types, including rigid substrates up to 2 inches thick and flexible materials, making it suitable for various applications such as signage, banners, posters, and displays.
Large Format: Boasts a generous maximum print width of 126.5 inches (3.2 meters), allowing for large format prints without compromising on quality.
Efficiency and Productivity
High Speed: Delivers impressive printing speeds up to 2400 square feet per hour, enabling fast turnaround times and increased productivity.
Continuous Printing: Features automated media handling and continuous printing capabilities, minimizing downtime and maximizing workflow efficiency.
User-Friendly Operation
Intuitive Interface: Equipped with a user-friendly interface and advanced software, making it easy to operate and manage print jobs.
Remote Monitoring: Offers remote monitoring capabilities, allowing operators to oversee the printing process and troubleshoot issues from a distance.
Specifications:
Print Technology: UV LED Curing
Maximum Print Width: 126.5 inches (3.2 meters)
Print Resolution: Up to 1000 dpi
Print Speed: Up to 2400 sq ft/hour
Media Thickness: Up to 2 inches
Year of Manufacture: 2015
The Vutek GS3250 LX UV Printer is a powerful addition to any printing operation, combining cutting-edge technology with exceptional performance. Its ability to handle a wide variety of print jobs with precision and efficiency makes it a valuable asset for businesses looking to expand their printing capabilities and deliver high-quality results to their clients.
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
_thumb.jpeg "Afficher l`annonce")
8
Machines d'impressionMachines de découpe
Technical Specifications:Cutting Width: 76 cm (760 mm)Maximum Stack Height: 10 cm (100 mm)Minimum Trim Width: 2 cm (20 mm)Cutting Speed: Adjustable for optimal productivityDrive System: Hydraulic, for powerful and consistent cutting performanceOperation: Manual and semi-automatic, with precise mechanical controlsSafety Features: Equipped with light curtains and emergency stop buttons for operator safetyDisplay: Digital screen for accurate positioning and setting of cutting parametersConstruction: Solid and stable frame for minimal vibration and maximum cutting accuracy
Technical Specifications:
Cutting Width: 76 cm (760 mm)
Maximum Stack Height: 10 cm (100 mm)
Minimum Trim Width: 2 cm (20 mm)
Cutting Speed: Adjustable for optimal productivity
Drive System: Hydraulic, for powerful and consistent cutting performance
Operation: Manual and semi-automatic, with precise mechanical controls
Safety Features: Equipped with light curtains and emergency stop buttons for operator safety
Display: Digital screen for accurate positioning and setting of cutting parameters
Construction: Solid and stable frame for minimal vibration and maximum cutting accuracy
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Cutting Width: 76 cm (760 mm)
Maximum Stack Height: 10 cm (100 mm)
Minimum Trim Width: 2 cm (20 mm)
Cutting Speed: Adjustable for optimal productivity
Drive System: Hydraulic, for powerful and consistent cutting performance
Operation: Manual and semi-automatic, with precise mechanical controls
Safety Features: Equipped with light curtains and emergency stop buttons for operator safety
Display: Digital screen for accurate positioning and setting of cutting parameters
Construction: Solid and stable frame for minimal vibration and maximum cutting accuracy
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 25Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mmMax. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mmUpper roll diameter: 360 mmLower roll diameter: 360 mmLateral roll diameter: 270 mmMax. opening: 60 mmWorking height: 1510 mmMotor power: 22 kWLength: 5560 mmWidth: 2060 mmHeight: 2050 mmWeight: 16750 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 360 mm
Lower roll diameter: 360 mm
Lateral roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1510 mm
Motor power: 22 kW
Length: 5560 mm
Width: 2060 mm
Height: 2050 mm
Weight: 16750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 360 mm
Lower roll diameter: 360 mm
Lateral roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1510 mm
Motor power: 22 kW
Length: 5560 mm
Width: 2060 mm
Height: 2050 mm
Weight: 16750 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 13Max. plate thickness without prebending - mild steel: 12 mmMax. plate thickness with prebending - mild steel: 8 mmMax. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mmUpper roll diameter: 270 mmLower roll diameter: 270 mmLateral roll diameter: 230 mmMax. opening: 50 mmWorking height: 1155 mmMotor power: 15 kWLength: 5310 mmWidth: 1660 mmHeight: 1590 mmWeight: 10050 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending - mild steel: 12 mm
Max. plate thickness with prebending - mild steel: 8 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 5310 mm
Width: 1660 mm
Height: 1590 mm
Weight: 10050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 13
Max. plate thickness without prebending - mild steel: 12 mm
Max. plate thickness with prebending - mild steel: 8 mm
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 5310 mm
Width: 1660 mm
Height: 1590 mm
Weight: 10050 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2550 mmMax. bending capacity - mild steel: 25Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mmUpper roll diameter: 350 mmLower roll diameter: 350 mmLateral roll diameter: 260 mmBending speed: 1,5-5 m/minMotor power: 22 kWLength: 5500 mmWidth: 2000 mmHeight: 1900 mmWeight: 13000 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2050 mmMax. bending capacity - mild steel: 16Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mmUpper roll diameter: 260 mmLower roll diameter: 260 mmLateral roll diameter: 200 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 4300 mmWidth: 1600 mmHeight: 1550 mmWeight: 6100 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 3100 mmMax. bending capacity - mild steel: 10Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mmUpper roll diameter: 260 mmLower roll diameter: 260 mmLateral roll diameter: 200 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 5350 mmWidth: 1600 mmHeight: 1550 mmWeight: 7685 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2550 mmMax. bending capacity - mild steel: 10Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mmUpper roll diameter: 245 mmLower roll diameter: 245 mmLateral roll diameter: 180 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 4800 mmWidth: 1600 mmHeight: 1470 mmWeight: 6170 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 2550 mmMax. bending capacity - mild steel: 9Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mmUpper roll diameter: 220 mmLower roll diameter: 220 mmLateral roll diameter: 160 mmBending speed: 1,5-6 m/minMotor power: 5.5 kWLength: 4900 mmWidth: 1150 mmHeight: 1250 mmWeight: 4600 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 220 mm
Lower roll diameter: 220 mm
Lateral roll diameter: 160 mm
Bending speed: 1,5-6 m/min
Motor power: 5.5 kW
Length: 4900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 4600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 220 mm
Lower roll diameter: 220 mm
Lateral roll diameter: 160 mm
Bending speed: 1,5-6 m/min
Motor power: 5.5 kW
Length: 4900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 4600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1550 mmMax. bending capacity - mild steel: 7Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mmUpper roll diameter: 150 mmLower roll diameter: 150 mmLateral roll diameter: 130 mmBending speed: 1,5-6 m/minMotor power: 4 kWLength: 3750 mmWidth: 960 mmHeight: 1100 mmWeight: 2500 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1050 mmMax. bending capacity - mild steel: 1Upper roll diameter: 56 mmLength: 1400 mmWidth: 700 mmHeight: 1120 mmWeight: 185 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 1
Upper roll diameter: 56 mm
Length: 1400 mm
Width: 700 mm
Height: 1120 mm
Weight: 185 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 1
Upper roll diameter: 56 mm
Length: 1400 mm
Width: 700 mm
Height: 1120 mm
Weight: 185 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1550 mmMax. bending capacity - mild steel: 2Upper roll diameter: 90 mmBending speed: 6 m/minMotor power: 1.5 kWLength: 2130 mmWidth: 700 mmHeight: 1200 mmWeight: 545 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsMachines à travailler la tôleMachines de laminage circulaire
Bending length: 1550 mmMax. bending capacity - mild steel: 4Upper roll diameter: 140 mmBending speed: 3 m/minMotor power: 2.2 kWLength: 2700 mmWidth: 750 mmHeight: 1000 mmWeight: 1420 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3120x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 350x140 mmCutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mmCutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mmCutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mmWorking height: 830 mmLength: 1600 mmWidth: 1550 mmHeight: 1750 mmWeight: 460 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 230 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 140 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 100 mm
Working height: 830 mm
Length: 1600 mm
Width: 1550 mm
Height: 1750 mm
Weight: 460 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3120 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 350x140 mmCutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mmCutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mmCutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mmWorking height: 830 mmLength: 1550 mmWidth: 1400 mmHeight: 1750 mmWeight: 420 kg
Saw frame: Pivot frame
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3120 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 350x140 mm
Cutting capacity 45°: rund 230 mm, quadrat 200 mm, rechteck 230 x 120 mm
Cutting capacity 60°: rund 150 mm, quadrat 130 mm, rechteck 130 x 130 mm
Cutting capacity - 45°: rund 200 mm, quadrat 170 mm, rechteck 220 x 110 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1750 mm
Weight: 420 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 3120x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 280 mmCutting capacity 0° square: 240 mmCutting capacity 0° rectangular: 370x140 mmCutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mmCutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mmWorking height: 830 mmLength: 1550 mmWidth: 1400 mmHeight: 1900 mmWeight: 353 kg
Saw frame: Pivot frame
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 370x140 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1900 mm
Weight: 353 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 3120x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 280 mm
Cutting capacity 0° square: 240 mm
Cutting capacity 0° rectangular: 370x140 mm
Cutting capacity 45°: rund 225 mm, quadrat 215 mm, rechteck 230 x 140 mm
Cutting capacity 60°: rund 140 mm, quadrat 140 mm, rechteck 140 x 130 mm
Working height: 830 mm
Length: 1550 mm
Width: 1400 mm
Height: 1900 mm
Weight: 353 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Travail des métaux et machines-outilsSciageScies à courroies
Saw frame: Pivot frameBand dimensions: 2450x27x0,9 mmBand speed: 35/70 m/minCutting capacity 0° round: 220 mmCutting capacity 0° square: 220 mmCutting capacity 0° rectangular: 260x140 mmCutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mmCutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mmWorking height: 965 mmLength: 1200 mmWidth: 1100 mmHeight: 1860 mmWeight: 240 kg
Saw frame: Pivot frame
Band dimensions: 2450x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° rectangular: 260x140 mm
Cutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mm
Cutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Band dimensions: 2450x27x0,9 mm
Band speed: 35/70 m/min
Cutting capacity 0° round: 220 mm
Cutting capacity 0° square: 220 mm
Cutting capacity 0° rectangular: 260x140 mm
Cutting capacity 45°: rund 160 mm, quadrat 155 mm, rechteck 160 x 140 mm
Cutting capacity 60°: rund 95 mm, quadrat 95 mm, rechteck 95 x 95 mm
Working height: 965 mm
Length: 1200 mm
Width: 1100 mm
Height: 1860 mm
Weight: 240 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
7
Travail des métaux et machines-outilsAccessoires et pièces détachéesAutres
Ausladung: 550 mmAufnahme: SK50Antriebsleistung: . kWGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 550 mm
Aufnahme: SK50
Antriebsleistung: . kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Aufnahme: SK50
Antriebsleistung: . kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsAccessoires et pièces détachéesAutres
Ausladung: 550 mmAufnahme: SK50Antriebsleistung: . kWGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Ausladung: 550 mm
Aufnahme: SK50
Antriebsleistung: . kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Aufnahme: SK50
Antriebsleistung: . kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Travail des métaux et machines-outilsAccessoires et pièces détachéesAutres
Gewicht: . kgAufnahme MK: .Höhe: 700 mmNutenabstand: 255 mmBackenbreite: 80 mm
Gewicht: . kg
Aufnahme MK: .
Höhe: 700 mm
Nutenabstand: 255 mm
Backenbreite: 80 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Aufnahme MK: .
Höhe: 700 mm
Nutenabstand: 255 mm
Backenbreite: 80 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
8
Travail des métaux et machines-outilsAccessoires et pièces détachéesAutres
Gewicht: . kgAufnahme MK: .Höhe: 350 mmNutenabstand: 255 mmBackenbreite: 80 mm
Gewicht: . kg
Aufnahme MK: .
Höhe: 350 mm
Nutenabstand: 255 mm
Backenbreite: 80 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Aufnahme MK: .
Höhe: 350 mm
Nutenabstand: 255 mm
Backenbreite: 80 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Travail des métaux et machines-outilsAccessoires et pièces détachéesTables tournantes
Tischabmessung: 1500x1200 mmTischhöhe: 520 mmT-Nuten - Breite: 28/48 mmT-Nuten - Abstand: 155 mmSteuerung: NCGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Tischabmessung: 1500x1200 mm
Tischhöhe: 520 mm
T-Nuten - Breite: 28/48 mm
T-Nuten - Abstand: 155 mm
Steuerung: NC
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Tischhöhe: 520 mm
T-Nuten - Breite: 28/48 mm
T-Nuten - Abstand: 155 mm
Steuerung: NC
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Travail des métaux et machines-outilsAccessoires et pièces détachéesAutres
Umlaufdurchmesser: 510 mmSpitzenhöhe: 550 mmBreite: 100 mmPinole:: 4Pinolendurchmesser: 60 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Umlaufdurchmesser: 510 mm
Spitzenhöhe: 550 mm
Breite: 100 mm
Pinole:: 4
Pinolendurchmesser: 60 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Spitzenhöhe: 550 mm
Breite: 100 mm
Pinole:: 4
Pinolendurchmesser: 60 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Travail des métaux et machines-outilsAccessoires et pièces détachées
Lagernummer: 1077-Z01186Maschinenart: ErsatzteileFabrikat: HeidenhainTyp: PT855 AnzeigeBaujahr: -Steuerung: konventionellLagerort: DorstenUrsprungsland: -Lieferzeit: sofortFrachtbasis: ab StandortPreis: Auf Anfrage
Lagernummer: 1077-Z01186
Maschinenart: Ersatzteile
Fabrikat: Heidenhain
Typ: PT855 Anzeige
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Maschinenart: Ersatzteile
Fabrikat: Heidenhain
Typ: PT855 Anzeige
Baujahr: -
Steuerung: konventionell
Lagerort: Dorsten
Ursprungsland: -
Lieferzeit: sofort
Frachtbasis: ab Standort
Preis: Auf Anfrage
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.