Länge: . mm
Höhe: . mm
Volt: U0 20-66 V
Ampere: I1 40-52 A

Länge: . mm
Höhe: . mm
Volt: U1 400 - 50 HZ V
Ampere: 40-52

Länge: . mm
Höhe: . mm
Volt: U0 20-66 V
Ampere: I1 40-52 A

Länge: . mm
Höhe: . mm
Volt: U0 20-66 V
Ampere: I1 35-52 A

Länge: . mm
Höhe: . mm
Volt: U0 20-66 V
Ampere: I1 35-52 A

Bending length: 2550 mm
Sheet thickness (420 N/mm²): 2.5 mm
Max. thickness - stainless steel: 1.5 mm
Max. thickness - aluminium: 3.5 mm
Antrieb: Motorized
Back gauge: 1000 mm
Length: 3830 mm
Width: 2200 mm
Height: 1900 mm
Weight: 4050 kg

Videojet VJ9950 Thermal print and apply machine. The 9550 is a smarter print and apply labeler, direct apply label placement, up to 150 packs per min, 1Ph

Ref. no.: 18439
Hersteller: MOTAN
Year of construction: 1995

Further information:
These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.

Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.

Ref. no.: 17540
Hersteller: ARBURG
Year of construction: 1994

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg

Ausladung: 5500 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Ausladung: 5500 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Ausladung: 5500 mm
Tragkraft in kg: 250 kg
Schwenkbereich: Grad
Höhe: 3800 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Planscheibendurchmesser: 2500 mm
Umlaufdurchmesser: 2800 mm
Drehhöhe: 2200 mm
Tischbelastung: 15 t
Drehzahl: U/min
Vorschub: mm/U
Support: 2
Gesamtleistungsbedarf: 55 kW
Maschinengewicht ca.: 56 t
Raumbedarf ca.: m

Hugo beck flexo 500S line

BOBST SP 102 E

Year 1980
Hour counter: 28.950

achine speed 7500 sheets/hour, max. pressure 250 tons,
workable material: paper 80 - 90 g/m², solid board up to 2000 g/m²,
Can be inspected in production.

Nebiolo Atena

Die cutting machine
Max format: 26x76 cm

Allpax P355 Vacuum sealer, stainless, mounted on frame, tabletop vac sealer, 300mm sealing bar, adjustable seal time, 1Ph

Allpax P355 Vacuum sealer, stainless, two in stock, tabletop vac sealer, 300mm sealing bar, adjustable seal time, 1Ph

Hydrovane HV04 air compressor, Serial: 504020750, 2019, 4Kw, Max Bar 11, RPM 1455, 3Ph, comes with receiver and BEKO drypoint RA dryer,

Ref. no.: 18395
Hersteller: DEMAG
Year of construction: 2007

Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 X 500 mm
Mould height min.: 250 mm
Mould height max.: 560 mm
Platen size (h x v): 750 X 750 mm

Injection unit
Screw diameter: 40 mm
Injection volume: 255 cm³
Shot weight: 230 g
Injection pressure: 2418 bar

Measurements and weight
Dimensions: 5,2 X 1,6 X 2,1 m
Machine weight: 7500 kg

Robot
Producer: Wittmann
Type: W711-1776 (doppelter x-Greifer)
Year: 2008

Operating pressure: max. 12.000 bar
Test chamber size (W x D x H): 1100 x 550 x 680
Operating hours modul 1: 1166
Operating hour modul 2: 150
Total power: 30 kW
Weight of machine: 9.500 kg
Space requirement (W x D x H): 5,2 x 3,2 x 2,7 m

The system consists of two individual systems that are positioned opposite each other. The control panel is designed for both systems. We are currently clarifying the conversion costs to convert the system into two self-sufficient systems.

Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008

Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm

Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar

Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m

Ref. no.: 18244
Hersteller: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 200 ton
Opening stroke: 575 mm
Distance between tie bars: 580 X 580 mm
Mould height min.: 340 mm
Mould height max.: 790 mm
Opening width: 1365 mm
Platen size (h x v): 860 X 860 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 442 cm³
Shot weight: 400 g
Injection pressure: 1946 bar

Measurements and weight
Dimensions: 5,4 X 1,7 X 2,1 m
Machine weight: 8200 kg

Perfecta 115 TS

Touch screen
Chromed table
Big Side tables
Autotrim, not working

deal for sheets such as paper, cardboard or even films and foils, rubber, leather, sandpaper and many other materials in stacks or individually. In addition to their outstanding mechanical basic concept, user-friendly operation and high safety standards are important features of the Perfecta high-speed cutters. Used worldwide, Perfecta products are not only used as individual machines, but are also integrated into cutting systems

The PERFECTA Cutpit offers special convenience for processing different cutting jobs. Depending on the nature and extent of the work to be done, the user can choose between three different operating modes. As a central control element, the user interface of the touch screen can thus be adapted to individual needs. Clearly understandable symbols make operation of the machine simple and intuitive. All work processes before, during and after cutting can be centrally monitored and evaluated. This guarantees you a smooth and efficient workflow and is an essential part of an economical production process.

The slotless PERFECTA cutting table allows smooth stock handling and prevents the accumulation of paper dust or debris in the mechanical system. Its anti-corrosion stainless steel coated surface protects the machine from wear and damage.

The ServoDrive PERFECTA guarantees precise positioning of the cutting material thanks to a servo-controlled linear backgauge drive system.

pressing capacity: 100 to
Stroke: 300 mm
Ram: 680x420 mm
Table: 1100x600 mm
Daylight: 500 mm
Rapid speed: 175 mm/s
Working speed: 55 mm/s
Retraction speed: 37 mm/s
Motor: 7.5 kW
Length: 1900 mm
Width: 1300 mm
Height: 2750 mm
Weight: 5400 kg

pressing capacity: 125 to
Stroke: 500 mm
Table: 1200x700 mm
Daylight: 600 mm
Rapid speed: 115 mm/s
Working speed: 7 mm/s
Retraction speed: 70 mm/s
Motor: 15 kW
Length: 2550 mm
Width: 1500 mm
Height: 2600 mm

pressing capacity: 150 to
Stroke: 500 mm
Ram: 800x400 mm
Table: 900x600 mm
Daylight: 500 mm
Throat depth: 300 mm
Rapid speed: 20 mm/s
Working speed: 3 mm/s
Motor: 4 kW
Length: 2200 mm
Width: 1500 mm
Height: 3000 mm
Weight: 5500 kg

AirMac cft 203 compressor

380 volt

Wohlenberg 115 CutTec paper cutting guillotine

Available immediately from stock.
Description:
– Color screen
- Chromed air table
– Positioning of items using the hand wheel
– Optimized cutting cycle
– Smoothly adjustable pressing pressure
– Automated knife change from the front
– Quick replacement of knives
–
Technical data:
Cutting length: 1150 mm
Maximum stack height: 165 mm
Input depth: 1150 mm

Wohlenberg 76 Paper Cutting Machine (1995)

The Wohlenberg 76 paper cutting machine, built in 1995, is a reliable and accurate cutting solution for printing companies. With a cutting width of 76 cm and a maximum stacking height of 10 cm, this machine is ideal for processing various print formats. Equipped with hydraulic drive, a digital display, and extensive safety features, the Wohlenberg 76 offers both ease of use and safety. The machine weighs approximately 1500 kg, which contributes to its stability and precision.

Brand: Sakurai
Model: SC 72 A
Year: 1990
Format: 52 x 72 cm
Spot coater

Heidelberg CX 102-4 sheetfed press

Format: 72 x 102 cm, CP 2000, Wallscreen, Impress control, Presscenter instant gate, Presscenter net profiler, Alcolor dampening, Preset Plus Feeder, Preset Plus delivery, Technotrans Combistar Beta 140 L air cooled, Heidelberg washstar for blanket and impression cylinder and rollers, Powderspray, Software version S15B.27.00
Machine nr: 550780, Impressions: 240 million

Swing diameter over cross slide: 480 mm
Swing diameter over bed slide: 670 mm
Turning length: 2000 mm
Speed range: 2800 rpm
Spindle bore: 107 mm
Turret: 12 -station
Speed of driven tools: 2500 rpm
Driven tools: yes
Coolant system: ja
Chip conveyor: yes
Control: Heidenhain CNC Pilot 3190
Chucks: Roehm Ø 400 m jaws
Machine on: 77517 h
Spindle on: 28962 h
Total power: 38 kW
Weight of machine: 10.000 kg
Space requirement (W x D x H): 7,6 x 5,4 x 1,9 m
Condition: very good

Main drive motor and gearbox overhauled, spindle with new bearings, ball screws X, Z new, scraper sliding plates new, oil mist extraction, chuck Röhm FD-HS 400-3 - ID 414896, hollow clamping cylinder SMW Autoblok type ZHDC-SN125/93, two gear stages

Accessory: towable steady rest max. clamping diameter 245 mm, towable tailstock, 4 driven tools (axial and radial),1 set of jaws

pressing capacity: 200 to
Stroke: 500 mm
Table: 2.000 x 1.550 mm
Daylight: 800 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 1550 mm
Horizontal movable cylinder: 1000 mm
Hydraulicaly movable stand: 1300 mm
Length: 2400 mm
Width: 2000 mm
Height: 2600 mm
Weight: 4800 kg

Josting EFS 2800 big size cutter

Cutting width 2800 cm
Year: 2006 –
Chrome back table with air.

–Knife chage tools

MHG SMG 45 Sandstrahlanlage

- Unterdruckstrahlkammer Höhe 550-700 mm
- Innenraum / Breite 1100 mm
- Innenraum / Tiefe 660 mm
- Arbeitsrost bis 50 kg belastbar
- Arbeitshandschuhe / Länge ca. 500mm (wechselbar)
- 2x seitliche Türen verschließbar
- Sichtfenster ca. 320x500mm (Sicherheitsglas)
- Ein/Aus - Beleuchtung außen montiert/abgeschirmt
- Ein/Aus Taster für Absaugventilator
- Fußpedal

Baqu2s2oifj

DONAU DR 40z Schnellradialbohrmaschine<br /><br />Technische Daten:<br />- Bohrleistung ins volle Stahl ST 60: 40 mm<br />- Bohrleistung GG 25: 50 mm<br />- Gewindeschneiden ST60: M 33<br />- Gewindeschneiden GG 25: M 45<br />- Bohrspindelaufnahme: MK<br />- Spindeldurchmesser: 55 mm<br />- Pinolenhub: 200 mm<br />- 18 Bohrspindeldrehzahlen 35-1800 U/min<br />- Bohrvorschübe 0,075 - 0,60 mm/U<br />- Höhenverstellung der Bohrsäule: 450 mm<br />- Bohrradius min/max: 305 / 1005 mm<br />- Tischgröße: 1200 x 600 mm<br />- Antrieb 400 V / 6 kW<br />- Platzbedarf: ca. B 1900 x H 2800 T 2300 mm<br />- Gewicht: ca.1800 kg

DELTA LF 350
Vertikal - Topfschleifmaschine
Jxwrga
Steuerung - Konventionell
Schleiflänge ca. 360mm
Schleifbreite ca. 155mm
Schleifhöhe ca. 300mm
Spindeldrehzahl ca. 2800 U/min
Antriebsleistung ca. 3 KW
Schleifbewegung Rechts - Links manuell
Z - Zustellung /manuell
Zubehör
Magnet
Nassschleifeinrichtung
Maschinenumhausung
Dokumentation
2 x Topfscheibe
Abzieheinrichtung
Schleifscheibenschutz
Feinzustellung - Z Achse
Abmaße
L x B x H ca. 1000x1000x1800mm
Gewicht ca. 500kg

Kraftformer / ECKOLD KF 324 / incl. 3 Satz Werkzeuge

-Ausladung - horizontal 340mm
-Ausladung - vertikal 245mm
-Arbeitshub 8mm
-Arbeitstakte pro Minute 400
-Leistung des Antriebsmotors 1,5 KW

-Verformbare Blechdicke:
-Stahl 400N/mm2 max: 2mm
-Alu 250/mm2 max: 2,5mm
Bbw8Lxeib
-Edelstahl/600N/mm2 max. 1,5mm
-Stösselverstellung über Handrad

Inclusive 3xWerkzeuge:
-Spannwerkzeug kpl. LFS 60S
-Z / Glättwerkzeug TP25 S /starr
-Plastikformer kpl. PFW 60 S
-Dokumentation
-Maschine anschlussfertig

Abmaße:
LxBxH 1,4x0,8x1,7 Meter
Gewicht ca. 550Kg

Bandsäge -Bauer S300

-Schnittleistung/Flach/ 90 Grad - 300mm
Dnxhnj
-Sägebandlänge 3900x25x0,9mm
-Bandgeschwindigkeit 20-70m/min
-Stufenlose Schnittdruckregulierung
-Gehrungsschnitteinrichtung
-Maschinenrollen


Abmaße: LxBxH
2,3x1,3x1,5 Meter /Gewicht 550Kg

DONAU DR 23 / Schnellradialbohrmaschine

-Bohrleistung / Stahl ca. 28mm
-Ausladung 700mm
-Spindelkonus MK3
-Drehzahlbereich 70-1550 U/min / Getriebeschaltung
-Vorschubbereich 0,075 - 0,3mm
-Bohrtiefe 130mm
-Gewindeschneideinrichtung
-Hydraulische Klemmung
-Seitliche Aufspannfläche für grössere Werkstücke
-Bohrfutter
-Dokumentation



Abmaße:
LxBxH 2x1,7x1,9 Meter /Gewicht 2000Kg

ATLANTIC HPA 30-135 / Guter Zustand unter Strom

-Druckkraft 135 Tonnen
-Abkantlänge 3050mm
-Durchgang zwischen den Ständern 2550mm
-Komplette Oberwange/Werkzeuge u. separate Segmente in verschiedenen Längen
-Zwei Matritzen
-Motorische Höhenverstellung
-Hinteranschlag manuell
-Frontauflage 2x
-Fußschalter / Handschalter
-unter Strom vorführbereit


Gxb82Nm
Abmaße:
LxBxH 4x1,8x2,4Meter / Gewicht ca. 8,5 tonnen

Zahnrad Abwälzfräsmaschine LIEBHERR / LORENZ S800

-Funktionsvideo au Anfrage

-Max. Werkstück mit Gegenhalter 600mm
-Max. Werkstück mit zurückgezogenem Gegenhalter 800mm
-Max. Weg des Frässchlittens 360mm
-Grösste fräsbare Teilung bei grösstem Werkstück 5Pi im normalen Leistungsbereich 8Pi
-Aufnahmekegel / Frässpindel MK5
-Fräsdorn 22/27/32/40mm
-Max. Fräserdurchmesser 186mm
-Max. Fräserlänge 170mm
-Max. Fräserverschiebung 80mm
-Fräserdrehzahlen 40-220 U/min
-Vorschübe stufenlos regelbar / Vertikal
-Vorschübe stufenlos regelbar / Horizontal
-Vorschübe stufenlos regelbar /Tangential
-Aufspanntisch ohne wasserrand 550mm
-Aufspanntischbohrung 100mm
-Aufspannkegeldorn MK 5
-Aufspanndorn 36mm

ZUBEHÖR:
-1xPalette Wechselräder
-1xPalette Abwälzfräser
-1xPalette Aufspanndorne
-Dokumentation / Maschinenfüße

Abmaße:
LxBxH 3,6x1,8x1,9 Meter / Gewicht 5500Kg


Won93G8C

Bending length: 2550 mm
Max. bending capacity - mild steel: 15
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 13 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 270 mm
Lower roll diameter: 270 mm
Lateral roll diameter: 230 mm
Max. opening: 50 mm
Working height: 1155 mm
Motor power: 15 kW
Length: 4760 mm
Width: 1660 mm
Height: 1155 mm
Weight: 8950 kg

Ref. no.: 17148
Hersteller: ENGEL
Year of construction: 2008

Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm

Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar

Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m

Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm

Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar

Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg

Ref. no.: 18333
Hersteller: DEMAG
Year of construction: 1998

Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar

Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14500 kg

Ref. no.: 18331
Hersteller: ARBURG
Year of construction: 2001

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg

Ref. no.: 18330
Hersteller: ARBURG
Year of construction: 2003

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm

Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar

Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg

Bending length: 3100 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=3x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 360 mm
Lower roll diameter: 360 mm
Lateral roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1510 mm
Motor power: 22 kW
Length: 5560 mm
Width: 2060 mm
Height: 2050 mm
Weight: 16750 kg