4
Machines à travailler la tôleCisaille pour tôle
Cutting length: 2025 mmMax. thickness - mild steel: 3 mmBack gauge: 500 mmMotor power: 4 kWLength: 2500 mmWidth: 1720 mmHeight: 1200 mmWeight: 1100 kg
Cutting length: 2025 mm
Max. thickness - mild steel: 3 mm
Back gauge: 500 mm
Motor power: 4 kW
Length: 2500 mm
Width: 1720 mm
Height: 1200 mm
Weight: 1100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. thickness - mild steel: 3 mm
Back gauge: 500 mm
Motor power: 4 kW
Length: 2500 mm
Width: 1720 mm
Height: 1200 mm
Weight: 1100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôlePlieuses
pressing capacity: 80 toStroke: 285 mmMax. bending capacity - mild steel: 300x25 mmTable: 750x1425 mmHeight of pins: 300 mmPin diameter: 105 mmWorking speed: 10 mm/minReturn speed: 10 mm/minMotor: 10 kWWorking height: 930 mmLength: 1430 mmWidth: 750 mmHeight: 1450 mmWeight: 1700 kg
pressing capacity: 80 to
Stroke: 285 mm
Max. bending capacity - mild steel: 300x25 mm
Table: 750x1425 mm
Height of pins: 300 mm
Pin diameter: 105 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 10 kW
Working height: 930 mm
Length: 1430 mm
Width: 750 mm
Height: 1450 mm
Weight: 1700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 285 mm
Max. bending capacity - mild steel: 300x25 mm
Table: 750x1425 mm
Height of pins: 300 mm
Pin diameter: 105 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 10 kW
Working height: 930 mm
Length: 1430 mm
Width: 750 mm
Height: 1450 mm
Weight: 1700 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôlePlieuses
pressing capacity: 40 toStroke: 285 mmMax. bending capacity - mild steel: 200x24 mmTable: 660x1250 mmHeight of pins: 250 mmPin diameter: 80 mmWorking speed: 10 mm/minReturn speed: 10 mm/minMotor: 4 kWWorking height: 930 mmLength: 1250 mmWidth: 650 mmHeight: 1250 mmWeight: 1100 kg
pressing capacity: 40 to
Stroke: 285 mm
Max. bending capacity - mild steel: 200x24 mm
Table: 660x1250 mm
Height of pins: 250 mm
Pin diameter: 80 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 4 kW
Working height: 930 mm
Length: 1250 mm
Width: 650 mm
Height: 1250 mm
Weight: 1100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 285 mm
Max. bending capacity - mild steel: 200x24 mm
Table: 660x1250 mm
Height of pins: 250 mm
Pin diameter: 80 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 4 kW
Working height: 930 mm
Length: 1250 mm
Width: 650 mm
Height: 1250 mm
Weight: 1100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôlePlieuses
pressing capacity: 10 toStroke: 185 mmMax. bending capacity - mild steel: 150x8 mmTable: 450x900 mmHeight of pins: 150 mmPin diameter: 60 mmWorking speed: 10 mm/minReturn speed: 10 mm/minMotor: 1.1 kWWorking height: 915 mmLength: 900 mmWidth: 450 mmHeight: 1130 mmWeight: 250 kg
pressing capacity: 10 to
Stroke: 185 mm
Max. bending capacity - mild steel: 150x8 mm
Table: 450x900 mm
Height of pins: 150 mm
Pin diameter: 60 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 1.1 kW
Working height: 915 mm
Length: 900 mm
Width: 450 mm
Height: 1130 mm
Weight: 250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 185 mm
Max. bending capacity - mild steel: 150x8 mm
Table: 450x900 mm
Height of pins: 150 mm
Pin diameter: 60 mm
Working speed: 10 mm/min
Return speed: 10 mm/min
Motor: 1.1 kW
Working height: 915 mm
Length: 900 mm
Width: 450 mm
Height: 1130 mm
Weight: 250 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 3050 mmMax. bending capacity - mild steel: 25Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 18 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 18 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 3050 mmMax. bending capacity - mild steel: 16Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 11 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 11 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 11 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 3050 mmMax. bending capacity - mild steel: 12Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 6.5 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 8 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 12
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 6.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 8 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 12
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 6.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 8 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 3050 mmMax. bending capacity - mild steel: 7Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 5 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 5 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 5 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2500 mmMax. bending capacity - mild steel: 27Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2500 mmMax. bending capacity - mild steel: 20Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2500 mmMax. bending capacity - mild steel: 14Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 14
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 14
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2500 mmMax. bending capacity - mild steel: 8Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2000 mmMax. bending capacity - mild steel: 28Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 28 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 22 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 26 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 23 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 28
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 28 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 22 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 26 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 23 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 28
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 28 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 22 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 26 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 23 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2000 mmMax. bending capacity - mild steel: 22Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 22 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 19 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 17 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 22
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 22 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 19 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 17 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 22
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 22 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 19 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 17 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2000 mmMax. bending capacity - mild steel: 18Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 18 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12.1 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 18
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 18 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12.1 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 18
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 18 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12.1 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleCisailles à section en acier
Punching power: 55 tonThroat depth: 250 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40/10 mmStroke: 20 mmStrokes: 37 1/minFlat steel: 300x15 mmAngle steel: 120x10 mmRound / square steel: 40 mmNotcher: 10 mmMotor: 5 kWLength: 1670 mmWidth: 1160 mmHeight: 2090 mmWeight: 1390 kg
Punching power: 55 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/10 mm
Stroke: 20 mm
Strokes: 37 1/min
Flat steel: 300x15 mm
Angle steel: 120x10 mm
Round / square steel: 40 mm
Notcher: 10 mm
Motor: 5 kW
Length: 1670 mm
Width: 1160 mm
Height: 2090 mm
Weight: 1390 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2000 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4.5 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4.5 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4.5 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 1500 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Bending length: 1500 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
11
Machines à travailler la tôlePlieuses pivotantes
Bending length: 1050 mmSheet thickness (420 N/mm²): 1.5 mmMax. thickness - stainless steel: 1 mmMax. thickness - aluminium: 2.2 mmMax. bending angle: 150 °Back gauge manual: 500 mmMax. opening width without tools: 200 mmUpper tool: sectioned, 45°Bending flange: adjustment 35 mmLength: 1300 mmWidth: 750 mmHeight: 1515 mmWeight: 280 kg
Bending length: 1050 mm
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Sheet thickness (420 N/mm²): 1.5 mm
Max. thickness - stainless steel: 1 mm
Max. thickness - aluminium: 2.2 mm
Max. bending angle: 150 °
Back gauge manual: 500 mm
Max. opening width without tools: 200 mm
Upper tool: sectioned, 45°
Bending flange: adjustment 35 mm
Length: 1300 mm
Width: 750 mm
Height: 1515 mm
Weight: 280 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2000 mmMax. bending capacity - mild steel: 11Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mmMax. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mmUpper roll diameter: 225 mmLower roll diameter: 215 mmLateral roll diameter: 165 mmBending speed: 8 m/minLength: 3950 mmWidth: 1200 mmHeight: 1200 mmWeight: 4450 kg
Bending length: 2000 mm
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2050 mmMax. bending capacity - mild steel: 4Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mmUpper roll diameter: 130 mmLower roll diameter: 130 mmLateral roll diameter: 130 mmBending speed: 5 m/minMotor power: 2,2 + 1,1 kWLength: 3800 mmWidth: 1150 mmHeight: 1110 mmWeight: 2450 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleMachines de formage de serrures universelles
Max. thickness - mild steel: 1.5 mmMotor power: 2 kWWorking height: 845 mmLength: 1660 mmWidth: 480 mmHeight: 1010 mmWeight: 326 kg
Max. thickness - mild steel: 1.5 mm
Motor power: 2 kW
Working height: 845 mm
Length: 1660 mm
Width: 480 mm
Height: 1010 mm
Weight: 326 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Motor power: 2 kW
Working height: 845 mm
Length: 1660 mm
Width: 480 mm
Height: 1010 mm
Weight: 326 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleCisailles à section en acier
Punching power: 60 tonThroat depth: 250 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40 x 11 mmStrokes: 32 1/minFlat steel: 350 x 15 mmAngle steel: 120 x 10 mmRound / square steel: 45 / 40 mmNotcher: 10 mmBending unit: max. 150x10 mmMotor: 5.5 kWLength: 1850 mmWidth: 1300 mmHeight: 2100 mmWeight: 1390 kg
Punching power: 60 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines à travailler la tôlePlieuses pivotantes
Bending length: 6400 mmBending capacity steel 400 N/mm²: 1.5 mmBending capacity Alu 190 N/mm²: 2 mmNo. of stand and tension arm units: 6
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 6
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 6
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Machines à travailler la tôle
pressing capacity: 400 toStroke: 500 mmTable: 4.000 x 2.550 mmDaylight: 700 mmRapid speed: 20 mm/sWorking speed: 2 mm/sCylinder fix or moveable: horizontal moveableDistance between columns: 2550 mmHorizontal movable cylinder: 1.8 mmHydraulicaly movable stand: 2.9 mmLength: 4000 mmWidth: 4000 mmHeight: 2600 mmWeight: 20500 kg
pressing capacity: 400 to
Stroke: 500 mm
Table: 4.000 x 2.550 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2550 mm
Horizontal movable cylinder: 1.8 mm
Hydraulicaly movable stand: 2.9 mm
Length: 4000 mm
Width: 4000 mm
Height: 2600 mm
Weight: 20500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Stroke: 500 mm
Table: 4.000 x 2.550 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2550 mm
Horizontal movable cylinder: 1.8 mm
Hydraulicaly movable stand: 2.9 mm
Length: 4000 mm
Width: 4000 mm
Height: 2600 mm
Weight: 20500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleMachines à cintrer les tuyauteries
Flexion modulus: 15 cm³Standard steel tube: 76 x 3 mmGas tube: 2"1/2 x 4 mmFurniture tube: 76 x 3 mmFE35 (for hydraulic tubes): 70 x 5 mmStainless steel AISI304-318: 70 x 4 mmStainless steel AISI308 (food industry): 76 x 1,6 mmBrass soft: 76 x 4 mmHard copper and aluminium: 76 x 6 mmSoft copper: 76 x 6 mmConduit tube (TAZ): 73 x 4 mmMepla, Gebereit and similar: 50 x 4 mmRoundbar solid (S275JO): 45 mmSquarebar solid (S275JO): 40 x 40 mmFlatsteel solid (S275JO): 10 x 90 mmSquare profile (S275JO): 30 x 60 x 3 bzw. 60 x 60 x 3 mmT-profile (S275JO): 60 x 60 x 6 mmU-profile (S275JO): 50 x 20 x 6 mmMax. bending radius: 380 mmMin. bending radius: 10 mmMin. tube Ø: 10 mmMax. bending speed: 2/4 r/minMotor: 3.5 kWLength: 370 mmWidth: 680 mmHeight: 910 mmWeight: 193 kg
Flexion modulus: 15 cm³
Standard steel tube: 76 x 3 mm
Gas tube: 2"1/2 x 4 mm
Furniture tube: 76 x 3 mm
FE35 (for hydraulic tubes): 70 x 5 mm
Stainless steel AISI304-318: 70 x 4 mm
Stainless steel AISI308 (food industry): 76 x 1,6 mm
Brass soft: 76 x 4 mm
Hard copper and aluminium: 76 x 6 mm
Soft copper: 76 x 6 mm
Conduit tube (TAZ): 73 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 45 mm
Squarebar solid (S275JO): 40 x 40 mm
Flatsteel solid (S275JO): 10 x 90 mm
Square profile (S275JO): 30 x 60 x 3 bzw. 60 x 60 x 3 mm
T-profile (S275JO): 60 x 60 x 6 mm
U-profile (S275JO): 50 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 2/4 r/min
Motor: 3.5 kW
Length: 370 mm
Width: 680 mm
Height: 910 mm
Weight: 193 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Standard steel tube: 76 x 3 mm
Gas tube: 2"1/2 x 4 mm
Furniture tube: 76 x 3 mm
FE35 (for hydraulic tubes): 70 x 5 mm
Stainless steel AISI304-318: 70 x 4 mm
Stainless steel AISI308 (food industry): 76 x 1,6 mm
Brass soft: 76 x 4 mm
Hard copper and aluminium: 76 x 6 mm
Soft copper: 76 x 6 mm
Conduit tube (TAZ): 73 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 45 mm
Squarebar solid (S275JO): 40 x 40 mm
Flatsteel solid (S275JO): 10 x 90 mm
Square profile (S275JO): 30 x 60 x 3 bzw. 60 x 60 x 3 mm
T-profile (S275JO): 60 x 60 x 6 mm
U-profile (S275JO): 50 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 2/4 r/min
Motor: 3.5 kW
Length: 370 mm
Width: 680 mm
Height: 910 mm
Weight: 193 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Machines à travailler la tôleMachines à cintrer les tuyauteries
Flexion modulus: 10 cm³Standard steel tube: 60 x 4 mmGas tube: 2" x 4 mmFurniture tube: 60 x 4 mmFE35 (for hydraulic tubes): 64 x 5 mmStainless steel AISI304-318: 64 x 3 mmStainless steel AISI308 (food industry): 60 x 3 mmBrass soft: 60 x 6 mmHard copper and aluminium: 64 x 6 mmSoft copper: 64 x 6 mmConduit tube (TAZ): 63 x 4 mmMepla, Gebereit and similar: 50 x 4 mmRoundbar solid (S275JO): 35 mmSquarebar solid (S275JO): 30 x 30 mmFlatsteel solid (S275JO): 14 x 60 mmSquare profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mmT-profile (S275JO): 50 x 50 x 6 mmU-profile (S275JO): 40 x 20 x 6 mmMax. bending radius: 380 mmMin. bending radius: 10 mmMin. tube Ø: 10 mmMax. bending speed: 1,5 / 3 r/minMotor: 1.5 kWLength: 500 mmWidth: 760 mmHeight: 1000 mmWeight: 186 kg
Flexion modulus: 10 cm³
Standard steel tube: 60 x 4 mm
Gas tube: 2" x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 5 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 3 mm
Brass soft: 60 x 6 mm
Hard copper and aluminium: 64 x 6 mm
Soft copper: 64 x 6 mm
Conduit tube (TAZ): 63 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 14 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,5 / 3 r/min
Motor: 1.5 kW
Length: 500 mm
Width: 760 mm
Height: 1000 mm
Weight: 186 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Standard steel tube: 60 x 4 mm
Gas tube: 2" x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 5 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 3 mm
Brass soft: 60 x 6 mm
Hard copper and aluminium: 64 x 6 mm
Soft copper: 64 x 6 mm
Conduit tube (TAZ): 63 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 14 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,5 / 3 r/min
Motor: 1.5 kW
Length: 500 mm
Width: 760 mm
Height: 1000 mm
Weight: 186 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à travailler la tôleMachines de laminage circulaire
Bending length: 2050 mmMax. bending capacity - mild steel: 20Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mmUpper roll diameter: 280 mmLower roll diameter: 280 mmLateral roll diameter: 220 mmBending speed: 1,5 / 5 m/minMotor power: 16 kWLength: 4350 mmWidth: 1700 mmHeight: 1850 mmWeight: 8550 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 280 mm
Lower roll diameter: 280 mm
Lateral roll diameter: 220 mm
Bending speed: 1,5 / 5 m/min
Motor power: 16 kW
Length: 4350 mm
Width: 1700 mm
Height: 1850 mm
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 280 mm
Lower roll diameter: 280 mm
Lateral roll diameter: 220 mm
Bending speed: 1,5 / 5 m/min
Motor power: 16 kW
Length: 4350 mm
Width: 1700 mm
Height: 1850 mm
Weight: 8550 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à travailler la tôleCisaille pour tôle
Cutting length: 1350 mmMax. thickness - mild steel: 3 mmStrokes: 35 1/minCutting angle: 1 °Back gauge: 550 mmMotor power: 3 kWSupport arms: 2 pcs.Table height: 850 mmTable width: 400 mmLength: 1700 mmWidth: 1350 mmHeight: 1200 mmWeight: 950 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
3
Machines à travailler la tôleRedresseurs d'aliments
Coil weight: 500 kgCoil outer diameter: 1200 mmMin. coil inner diameter: 470 mmMax. Coil inner diameter: 520Max. coil width: 300 mmMin. coil width for version with pneumatic downholder: 80 mmLength: 1450 mmWidth: 1200 mmHeight: 1640 mmWeight: 260 kg
Coil weight: 500 kg
Coil outer diameter: 1200 mm
Min. coil inner diameter: 470 mm
Max. Coil inner diameter: 520
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1450 mm
Width: 1200 mm
Height: 1640 mm
Weight: 260 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Coil outer diameter: 1200 mm
Min. coil inner diameter: 470 mm
Max. Coil inner diameter: 520
Max. coil width: 300 mm
Min. coil width for version with pneumatic downholder: 80 mm
Length: 1450 mm
Width: 1200 mm
Height: 1640 mm
Weight: 260 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à travailler la tôleFreins de presse
pressing capacity: 200 toBending length: 3050 mmAxes: Y1 / Y2 and X-axisStroke: 210 mmInside distance between side frames: 2550 mmGap in side frame: 250 mmDaylight: 445 mmPower concept: hydraulicrapid speed Y-axis: 100 mm/sWorking speed Y-axis: 7Retractionspeed Y-axis: 73Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mmBack gauge speed X-axis: 250Table height: 858 mmTable width: 104 mmOiltank: 150 lMotor power: 15 kWLength: 3750 mmWidth: 1390 mmHeight: 2500 mmWeight: 8160 kg
pressing capacity: 200 to
Bending length: 3050 mm
Axes: Y1 / Y2 and X-axis
Stroke: 210 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 445 mm
Power concept: hydraulic
rapid speed Y-axis: 100 mm/s
Working speed Y-axis: 7
Retractionspeed Y-axis: 73
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 858 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 3750 mm
Width: 1390 mm
Height: 2500 mm
Weight: 8160 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 3050 mm
Axes: Y1 / Y2 and X-axis
Stroke: 210 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 445 mm
Power concept: hydraulic
rapid speed Y-axis: 100 mm/s
Working speed Y-axis: 7
Retractionspeed Y-axis: 73
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 858 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 3750 mm
Width: 1390 mm
Height: 2500 mm
Weight: 8160 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleMachines à cintrer les tuyauteries
Flexion modulus: 6 cm³Standard steel tube: 48 x 3,5 mmGas tube: 1"1/2 x 3.68 mmFurniture tube: 54 x 1,5 mmFE35 (for hydraulic tubes): 50 x 4 mmStainless steel AISI304-318: 50 x 3 mmStainless steel AISI308 (food industry): 40 x 2,5 mmBrass soft: 60 x 3 mmHard copper and aluminium: 64 x 2 mmSoft copper: 64 x 2 mmConduit tube (TAZ): 60 x 2 mmMepla, Gebereit and similar: 50 x 4 mmRoundbar solid (S275JO): 32 mmSquarebar solid (S275JO): 30 x 30 mmFlatsteel solid (S275JO): 8 x 48 mmSquare profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mmT-profile (S275JO): 40 x 40 x 5 mmU-profile (S275JO): 32 x 16 x 5 mmMax. bending radius: 300 mmMin. bending radius: 10 mmMin. tube Ø: 10 mmMax. bending speed: 4 r/minMotor: 1.5 kWLength: 570 mmWidth: 410 mmHeight: 1000 mmWeight: 110 kg
Flexion modulus: 6 cm³
Standard steel tube: 48 x 3,5 mm
Gas tube: 1"1/2 x 3.68 mm
Furniture tube: 54 x 1,5 mm
FE35 (for hydraulic tubes): 50 x 4 mm
Stainless steel AISI304-318: 50 x 3 mm
Stainless steel AISI308 (food industry): 40 x 2,5 mm
Brass soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Soft copper: 64 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 32 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 8 x 48 mm
Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm
T-profile (S275JO): 40 x 40 x 5 mm
U-profile (S275JO): 32 x 16 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 4 r/min
Motor: 1.5 kW
Length: 570 mm
Width: 410 mm
Height: 1000 mm
Weight: 110 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Standard steel tube: 48 x 3,5 mm
Gas tube: 1"1/2 x 3.68 mm
Furniture tube: 54 x 1,5 mm
FE35 (for hydraulic tubes): 50 x 4 mm
Stainless steel AISI304-318: 50 x 3 mm
Stainless steel AISI308 (food industry): 40 x 2,5 mm
Brass soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Soft copper: 64 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 32 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 8 x 48 mm
Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm
T-profile (S275JO): 40 x 40 x 5 mm
U-profile (S275JO): 32 x 16 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 4 r/min
Motor: 1.5 kW
Length: 570 mm
Width: 410 mm
Height: 1000 mm
Weight: 110 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Machines à travailler la tôleFreins de presse
Druck: 400 tAbkantlänge: 4000 mmStänderweite: 3500 mmSteuerung: CNCTyp: BC 25 GraphicAusladung: 400 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 25 tRaumbedarf ca.: m
Druck: 400 t
Abkantlänge: 4000 mm
Ständerweite: 3500 mm
Steuerung: CNC
Typ: BC 25 Graphic
Ausladung: 400 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 25 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Abkantlänge: 4000 mm
Ständerweite: 3500 mm
Steuerung: CNC
Typ: BC 25 Graphic
Ausladung: 400 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 25 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôlePlieuses
Shaft diameter: 85Rolls diameter: 247 mmDriven rolls: 3Motor power: 7.5 kWFlat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mmFlat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mmSquare bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mmRound bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mmTube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mmForm tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mmForm tube square (section / min. diameter): 70x70x4 mmAngle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mmAngle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mmLength: 1580 mmWidth: 1200 mmHeight: 1410 mmWeight: 2350 kg
Shaft diameter: 85
Rolls diameter: 247 mm
Driven rolls: 3
Motor power: 7.5 kW
Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm
Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm
Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm
Form tube square (section / min. diameter): 70x70x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm
Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm
Length: 1580 mm
Width: 1200 mm
Height: 1410 mm
Weight: 2350 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Rolls diameter: 247 mm
Driven rolls: 3
Motor power: 7.5 kW
Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm
Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm
Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm
Form tube square (section / min. diameter): 70x70x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm
Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm
Length: 1580 mm
Width: 1200 mm
Height: 1410 mm
Weight: 2350 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôlePlieuses
Shaft diameter: 120Rolls diameter: 390 mmDriven rolls: 3Motor power: 15 kWSpeed: 2/7,5 m/minFlat steel vertical position (section / min. diameter): 125x25 mm / 1.200 mm, 30x10 mm / 500 mmFlat steel horizontal position (section / min. diameter): 200x50 mm / 1.000 mm, 100x10 mm / 500 mmSquare bar (section / min. diameter): 65x65 mm / 750 mm, 20x20 mm / 500 mmRound bar (section / min. diameter): Ø 80 mm / 850 mm, Ø 20 mm / 500 mmTube (section / min. diameter): Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5"x6,35 / 1.500 mm, Ø 3/4"x2,87 / 500 mmForm tube vertical position (Querschnitt / min. Durchmesser): 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mmForm tube square (section / min. diameter): 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mmAngle leg outside (Querschnitt / min. Durchmesser): 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mmAngle leg inside (section / min. diameter): 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mmUPN leg outside (section / min. diameter): UPN 220 / 1.000 mm, UPN 180 / 800 mm, UPN 40 / 500 mmUPN leg inside (section / min. diameter): UPN 220 / 1.200 mm, UPN 180 / 900 mm, UPN 40 / 600 mmIPN horizontal position (section / min. diameter): IPN 220 / 1.000 mm, IPN 80 / 500 mmLength: 2000 mmWidth: 1650 mmHeight: 1900 mmWeight: 4770 kg
Shaft diameter: 120
Rolls diameter: 390 mm
Driven rolls: 3
Motor power: 15 kW
Speed: 2/7,5 m/min
Flat steel vertical position (section / min. diameter): 125x25 mm / 1.200 mm, 30x10 mm / 500 mm
Flat steel horizontal position (section / min. diameter): 200x50 mm / 1.000 mm, 100x10 mm / 500 mm
Square bar (section / min. diameter): 65x65 mm / 750 mm, 20x20 mm / 500 mm
Round bar (section / min. diameter): Ø 80 mm / 850 mm, Ø 20 mm / 500 mm
Tube (section / min. diameter): Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5"x6,35 / 1.500 mm, Ø 3/4"x2,87 / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mm
Form tube square (section / min. diameter): 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mm
UPN leg outside (section / min. diameter): UPN 220 / 1.000 mm, UPN 180 / 800 mm, UPN 40 / 500 mm
UPN leg inside (section / min. diameter): UPN 220 / 1.200 mm, UPN 180 / 900 mm, UPN 40 / 600 mm
IPN horizontal position (section / min. diameter): IPN 220 / 1.000 mm, IPN 80 / 500 mm
Length: 2000 mm
Width: 1650 mm
Height: 1900 mm
Weight: 4770 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Rolls diameter: 390 mm
Driven rolls: 3
Motor power: 15 kW
Speed: 2/7,5 m/min
Flat steel vertical position (section / min. diameter): 125x25 mm / 1.200 mm, 30x10 mm / 500 mm
Flat steel horizontal position (section / min. diameter): 200x50 mm / 1.000 mm, 100x10 mm / 500 mm
Square bar (section / min. diameter): 65x65 mm / 750 mm, 20x20 mm / 500 mm
Round bar (section / min. diameter): Ø 80 mm / 850 mm, Ø 20 mm / 500 mm
Tube (section / min. diameter): Ø 160x4 mm / 2.800 mm, Ø 140x3 mm / 1.500 mm, Ø 50x2 mm / 500 mm, Ø 5"x6,35 / 1.500 mm, Ø 3/4"x2,87 / 500 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 120x40x4 mm / 1.800 mm, 30x20x3 mm / 500 mm
Form tube square (section / min. diameter): 90x90x5 mm / 1.800 mm, 30x30x3 mm / 500 mm
Angle leg outside (Querschnitt / min. Durchmesser): 120x120x12 mm / 1.200 mm, 40x40x4 mm / 600 mm
Angle leg inside (section / min. diameter): 100x100x10 mm / 1.200 mm, 40x40x4 mm / 600 mm
UPN leg outside (section / min. diameter): UPN 220 / 1.000 mm, UPN 180 / 800 mm, UPN 40 / 500 mm
UPN leg inside (section / min. diameter): UPN 220 / 1.200 mm, UPN 180 / 900 mm, UPN 40 / 600 mm
IPN horizontal position (section / min. diameter): IPN 220 / 1.000 mm, IPN 80 / 500 mm
Length: 2000 mm
Width: 1650 mm
Height: 1900 mm
Weight: 4770 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleFreins de presse
pressing capacity: 40 toBending length: 2050 mmAxes: Y1 / Y2 / X and R axisStroke: 200 mmInside distance between side frames: 1700 mmGap in side frame: 350 mmDaylight: 440 mmPower concept: servomotorized spindle driverapid speed Y-axis: 180 mm/sWorking speed Y-axis: 10Retractionspeed Y-axis: 115Back gauge travel X-axis: 650 mmBack gauge travel R-axis: 250 mmTable height: 900 mmMotor power: 7.2 kWLength: 2600 mmWidth: 1450 mmHeight: 2650 mmWeight: 4400 kg
pressing capacity: 40 to
Bending length: 2050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1700 mm
Gap in side frame: 350 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Motor power: 7.2 kW
Length: 2600 mm
Width: 1450 mm
Height: 2650 mm
Weight: 4400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 2050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1700 mm
Gap in side frame: 350 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 180 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Motor power: 7.2 kW
Length: 2600 mm
Width: 1450 mm
Height: 2650 mm
Weight: 4400 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleFreins de presse
pressing capacity: 40 toBending length: 1250 mmAxes: Y1 / Y2 / X and R axisStroke: 200 mmInside distance between side frames: 1050 mmGap in side frame: 250 mmDaylight: 440 mmPower concept: servomotorized spindle driverapid speed Y-axis: 115 mm/sWorking speed Y-axis: 10Retractionspeed Y-axis: 115Back gauge travel X-axis: 650 mmBack gauge travel R-axis: 250 mmTable height: 1000 mmMotor power: 7.2 kWLength: 1950 mmWidth: 1450 mmHeight: 2650 mmWeight: 3600 kg
pressing capacity: 40 to
Bending length: 1250 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1050 mm
Gap in side frame: 250 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 115 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 1000 mm
Motor power: 7.2 kW
Length: 1950 mm
Width: 1450 mm
Height: 2650 mm
Weight: 3600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 1250 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 200 mm
Inside distance between side frames: 1050 mm
Gap in side frame: 250 mm
Daylight: 440 mm
Power concept: servomotorized spindle drive
rapid speed Y-axis: 115 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 115
Back gauge travel X-axis: 650 mm
Back gauge travel R-axis: 250 mm
Table height: 1000 mm
Motor power: 7.2 kW
Length: 1950 mm
Width: 1450 mm
Height: 2650 mm
Weight: 3600 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines à travailler la tôleFreins de presse
pressing capacity: 320 toBending length: 4050 mmAxes: Y1 / Y2 / X and R axisStroke: 365 mmInside distance between side frames: 3600 mmGap in side frame: 410 mmDaylight: 630 mmPower concept: hydraulicrapid speed Y-axis: 160 mm/sWorking speed Y-axis: 10Retractionspeed Y-axis: 160Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 154 mmMotor power: 2 x 11 kWLength: 5300 mmWidth: 1910 mmHeight: 3230 mmWeight: 20100 kg
pressing capacity: 320 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Motor power: 2 x 11 kW
Length: 5300 mm
Width: 1910 mm
Height: 3230 mm
Weight: 20100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 154 mm
Motor power: 2 x 11 kW
Length: 5300 mm
Width: 1910 mm
Height: 3230 mm
Weight: 20100 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
4
Machines à travailler la tôleFreins de presse
pressing capacity: 320 toBending length: 3050 mmAxes: Y1 / Y2 / X and R axisStroke: 365 mmInside distance between side frames: 2600 mmGap in side frame: 410 mmDaylight: 630 mmPower concept: hydraulicrapid speed Y-axis: 160 mm/sWorking speed Y-axis: 10Retractionspeed Y-axis: 160Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmMotor power: 2 x 11 kWLength: 4300 mmWidth: 1820 mmHeight: 3330 mmWeight: 16500 kg
pressing capacity: 320 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 16500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 365 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 630 mm
Power concept: hydraulic
rapid speed Y-axis: 160 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 160
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2 x 11 kW
Length: 4300 mm
Width: 1820 mm
Height: 3330 mm
Weight: 16500 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôlePlieuses pivotantes
Bending length: 3100 mmSheet thickness (420 N/mm²): 3.5 mmAntrieb: HydraulicMax. bending angle: 135 °Length: 4300 mmWidth: 1770 mmHeight: 1890 mmWeight: 4220 kg
Bending length: 3100 mm
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 4300 mm
Width: 1770 mm
Height: 1890 mm
Weight: 4220 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 4300 mm
Width: 1770 mm
Height: 1890 mm
Weight: 4220 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôlePerforation
Punching power: 80 tonThroat depth: 750 mmMax. diameter at sheet thickness (mild steel): 40x14 mmMax. number of strokes at 20 mm stroke: 40 1/minMotor: 9 kWLength: 1700 mmWidth: 1300 mmHeight: 2050 mmWeight: 1715 kg
Punching power: 80 ton
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Throat depth: 750 mm
Max. diameter at sheet thickness (mild steel): 40x14 mm
Max. number of strokes at 20 mm stroke: 40 1/min
Motor: 9 kW
Length: 1700 mm
Width: 1300 mm
Height: 2050 mm
Weight: 1715 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleCisailles à section en acier
Punching power: 165 tonThroat depth: 610 mmNumber of stations: 5Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mmStroke: 110 mmStrokes: 31 1/minFlat steel: 750x20 / 400x30 mmAngle steel: 205x205x18 mmRound / square steel: 60 mmNotcher: 16x58x110 mmMotor: 15 kWLength: 2950 mmWidth: 1600 mmHeight: 2200 mmWeight: 6300 kg
Punching power: 165 ton
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Throat depth: 610 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40/30 bzw. 34/34 mm
Stroke: 110 mm
Strokes: 31 1/min
Flat steel: 750x20 / 400x30 mm
Angle steel: 205x205x18 mm
Round / square steel: 60 mm
Notcher: 16x58x110 mm
Motor: 15 kW
Length: 2950 mm
Width: 1600 mm
Height: 2200 mm
Weight: 6300 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines à travailler la tôlePlieuses pivotantes
Bending length: 8020 mmBending capacity steel 400 N/mm²: 1.5 mmBending capacity Alu 190 N/mm²: 2 mmNo. of stand and tension arm units: 8
Bending length: 8020 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 8
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 8
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines à travailler la tôlePlieuses pivotantes
Bending length: 8200 mmBending capacity steel 400 N/mm²: 2 mmBending capacity Alu 190 N/mm²: 2 mmCutting capacity electrical shear: 1.5 - 2 mmNo. of stand and tension arm units: 8No. of driven linkage assemblies: 8Sheet insertion depth: 1000 mm
Bending length: 8200 mm
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 8
No. of driven linkage assemblies: 8
Sheet insertion depth: 1000 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity steel 400 N/mm²: 2 mm
Bending capacity Alu 190 N/mm²: 2 mm
Cutting capacity electrical shear: 1.5 - 2 mm
No. of stand and tension arm units: 8
No. of driven linkage assemblies: 8
Sheet insertion depth: 1000 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
6
Machines à travailler la tôlePlieuses pivotantes
Bending length: 6400 mmBending capacity steel 400 N/mm²: 1.75 mmBending capacity Alu 190 N/mm²: 2 mmNo. of stand and tension arm units: 6Sheet insertion depth: 1000 mm
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.75 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 6
Sheet insertion depth: 1000 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending capacity steel 400 N/mm²: 1.75 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 6
Sheet insertion depth: 1000 mm
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
5
Machines à travailler la tôleFreins de presse
pressing capacity: 40 toBending length: 1250 mmAxes: X and Y axisStroke: 100 mmDaylight: 310 mmPower concept: hydraulicOiltank: 38 lMotor: 6 kWBack gauge: 420 mmDie: 1Geschwindigkeit: 10 mm/sRetraction speed: 12 mm/sBack gauge speed: 40 mm/sAccuracy press beam: 0.02 +/- mmBack gauge accuracy: 0.05 +/- mmLength: 1750 mmWidth: 950 mmHeight: 1900 mmWeight: 1640 kg
pressing capacity: 40 to
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 1640 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Bending length: 1250 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 1750 mm
Width: 950 mm
Height: 1900 mm
Weight: 1640 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
10
Machines à travailler la tôleFreins de presse
Druck: 125 tAbkantlänge: 3000 mmStänderweite: . mmSteuerung: CNCHub: 200 mmSicherheitsabstand: 136 mmEilgang Abwärtsbewegung: 100 mm/secEilgang Aufwärtsbewegung: 92 mm/secArbeitsgeschwindigkeit: 1-10 mm/secAusladung: mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 13 tRaumbedarf ca.: m
Druck: 125 t
Abkantlänge: 3000 mm
Ständerweite: . mm
Steuerung: CNC
Hub: 200 mm
Sicherheitsabstand: 136 mm
Eilgang Abwärtsbewegung: 100 mm/sec
Eilgang Aufwärtsbewegung: 92 mm/sec
Arbeitsgeschwindigkeit: 1-10 mm/sec
Ausladung: mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 13 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Abkantlänge: 3000 mm
Ständerweite: . mm
Steuerung: CNC
Hub: 200 mm
Sicherheitsabstand: 136 mm
Eilgang Abwärtsbewegung: 100 mm/sec
Eilgang Aufwärtsbewegung: 92 mm/sec
Arbeitsgeschwindigkeit: 1-10 mm/sec
Ausladung: mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 13 t
Raumbedarf ca.: m
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
1
Machines à travailler la tôleCisailles à section en acier
Punching power: 45 tonThroat depth: 175 mmNumber of stations: 4Max. diameter at sheet thickness (mild steel): 27 x 12 mmStroke: 15 mmStrokes: 16 1/minFlat steel: 300x10 / 200x13 mmAngle steel: 80x80x8 mmNotcher: 7 mmMotor: 2 kWLength: 1360 mmWidth: 1100 mmHeight: 1500 mmWeight: 800 kg
Punching power: 45 ton
Throat depth: 175 mm
Number of stations: 4
Max. diameter at sheet thickness (mild steel): 27 x 12 mm
Stroke: 15 mm
Strokes: 16 1/min
Flat steel: 300x10 / 200x13 mm
Angle steel: 80x80x8 mm
Notcher: 7 mm
Motor: 2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Throat depth: 175 mm
Number of stations: 4
Max. diameter at sheet thickness (mild steel): 27 x 12 mm
Stroke: 15 mm
Strokes: 16 1/min
Flat steel: 300x10 / 200x13 mm
Angle steel: 80x80x8 mm
Notcher: 7 mm
Motor: 2 kW
Length: 1360 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
14
Machines à travailler la tôleFreins de presse
Pressure: 50 tWorking length: 2550 mmDistance between columns: 2050 mmBending power: bei 1 m - bis 10 mmSpace requirement (W x D x H): 2,9 x 1,6 x 2,3 mWeight of machine: 4200 kgTotal power: 4,5 kWCondition: very goodhardly used, very good condition, all cylinders are tight, press control type PSSASAccessory: Various bending tools, documentation, stand for tools
Pressure: 50 t
Working length: 2550 mm
Distance between columns: 2050 mm
Bending power: bei 1 m - bis 10 mm
Space requirement (W x D x H): 2,9 x 1,6 x 2,3 m
Weight of machine: 4200 kg
Total power: 4,5 kW
Condition: very good
hardly used, very good condition, all cylinders are tight, press control type PSSAS
Accessory: Various bending tools, documentation, stand for tools
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Working length: 2550 mm
Distance between columns: 2050 mm
Bending power: bei 1 m - bis 10 mm
Space requirement (W x D x H): 2,9 x 1,6 x 2,3 m
Weight of machine: 4200 kg
Total power: 4,5 kW
Condition: very good
hardly used, very good condition, all cylinders are tight, press control type PSSAS
Accessory: Various bending tools, documentation, stand for tools
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
2
Machines à travailler la tôleCisaille pour tôle
Cutting length: 2050 mmMax. thickness - mild steel: 4 mmStrokes: 42 1/minBack gauge: 750 mmMotor power: 7.5 kWTable height: 800 mmTable width: 450 mmLength: 2700 mmWidth: 2300 mmHeight: 1350 mmWeight: 2800 kg
Cutting length: 2050 mm
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Back gauge: 750 mm
Motor power: 7.5 kW
Table height: 800 mm
Table width: 450 mm
Length: 2700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 2800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.
Max. thickness - mild steel: 4 mm
Strokes: 42 1/min
Back gauge: 750 mm
Motor power: 7.5 kW
Table height: 800 mm
Table width: 450 mm
Length: 2700 mm
Width: 2300 mm
Height: 1350 mm
Weight: 2800 kg
L`annonce a été traduite automatiquement et certaines erreurs de traduction peuvent s`être produites.