Please wait...

5
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 30-260
Bending length: 3100 mm Max. bending capacity - mild steel: 10 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm Upper roll diameter: 260 mm Lower roll diameter: 260 mm Lateral roll diameter: 200 mm Bending speed: 1,5-6 m/min Motor power: 7.5 kW Length: 5350 mm Width: 1600 mm Height: 1550 mm Weight: 7685 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg
5
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 25-245
Bending length: 2550 mm Max. bending capacity - mild steel: 10 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Lateral roll diameter: 180 mm Bending speed: 1,5-6 m/min Motor power: 7.5 kW Length: 4800 mm Width: 1600 mm Height: 1470 mm Weight: 6170 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4800 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6170 kg
5
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 20-220
Bending length: 2050 mm Max. bending capacity - mild steel: 11 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 9 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 9 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 7 mm Upper roll diameter: 220 mm Lower roll diameter: 220 mm Lateral roll diameter: 160 mm Bending speed: 1,5-6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 4080 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 9 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Upper roll diameter: 220 mm
Lower roll diameter: 220 mm
Lateral roll diameter: 160 mm
Bending speed: 1,5-6 m/min
Motor power: 5.5 kW
Length: 4400 mm
Width: 1150 mm
Height: 1250 mm
Weight: 4080 kg
5
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 30-245
Bending length: 3100 mm Max. bending capacity - mild steel: 9 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Lateral roll diameter: 180 mm Bending speed: 1,5-6 m/min Motor power: 7.5 kW Length: 5350 mm Width: 1600 mm Height: 1470 mm Weight: 6850 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 245 mm
Lower roll diameter: 245 mm
Lateral roll diameter: 180 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1470 mm
Weight: 6850 kg
5
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 25-220
Bending length: 2550 mm Max. bending capacity - mild steel: 9 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm Upper roll diameter: 220 mm Lower roll diameter: 220 mm Lateral roll diameter: 160 mm Bending speed: 1,5-6 m/min Motor power: 5.5 kW Length: 4900 mm Width: 1150 mm Height: 1250 mm Weight: 4600 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 9
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 9 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 220 mm
Lower roll diameter: 220 mm
Lateral roll diameter: 160 mm
Bending speed: 1,5-6 m/min
Motor power: 5.5 kW
Length: 4900 mm
Width: 1150 mm
Height: 1250 mm
Weight: 4600 kg
6
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 15-150
Bending length: 1550 mm Max. bending capacity - mild steel: 7 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm Upper roll diameter: 150 mm Lower roll diameter: 150 mm Lateral roll diameter: 130 mm Bending speed: 1,5-6 m/min Motor power: 4 kW Length: 3750 mm Width: 960 mm Height: 1100 mm Weight: 2500 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4.5 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3.5 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 3750 mm
Width: 960 mm
Height: 1100 mm
Weight: 2500 kg
5
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HS 20-150
Bending length: 2050 mm Max. bending capacity - mild steel: 6 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm Upper roll diameter: 150 mm Lower roll diameter: 150 mm Lateral roll diameter: 130 mm Bending speed: 1,5-6 m/min Motor power: 4 kW Length: 4250 mm Width: 960 mm Height: 1100 mm Weight: 2800 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Upper roll diameter: 150 mm
Lower roll diameter: 150 mm
Lateral roll diameter: 130 mm
Bending speed: 1,5-6 m/min
Motor power: 4 kW
Length: 4250 mm
Width: 960 mm
Height: 1100 mm
Weight: 2800 kg
1
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN RS 10

HESSE by ISITAN RS 1050 x 90
Bending length: 1050 mm Max. bending capacity - mild steel: 3 Max. plate thickness with prebending - mild steel: 2 mm Upper roll diameter: 90 mm Length: 2080 mm Width: 700 mm Height: 1250 mm Weight: 410 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Max. plate thickness with prebending - mild steel: 2 mm
Upper roll diameter: 90 mm
Length: 2080 mm
Width: 700 mm
Height: 1250 mm
Weight: 410 kg
1
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IR 12

HESSE by ISITAN IR 1270 x 75
Bending length: 1270 mm Max. bending capacity - mild steel: 1.5 Upper roll diameter: 75 mm Motor power: 1.5 kW Length: 1830 mm Width: 700 mm Height: 1160 mm Weight: 400 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 1.5
Upper roll diameter: 75 mm
Motor power: 1.5 kW
Length: 1830 mm
Width: 700 mm
Height: 1160 mm
Weight: 400 kg
1
Sheet metal working machinesRound rolling machines

Manual 3-roll plate bending machine HESSE by ISITAN R 1270 x

HESSE by ISITAN R 1270 x 68
Bending length: 1270 mm Max. bending capacity - mild steel: 1.2 Upper roll diameter: 68 mm Motor power: 1.5 kW Length: 1610 mm Width: 700 mm Height: 1160 mm Weight: 385 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 1.2
Upper roll diameter: 68 mm
Motor power: 1.5 kW
Length: 1610 mm
Width: 700 mm
Height: 1160 mm
Weight: 385 kg
6
Sheet metal working machinesRound rolling machines

Manual 3-roll plate bending machine HESSE by ISITAN R 1050 x

HESSE by ISITAN R 1050 x 56
Bending length: 1050 mm Max. bending capacity - mild steel: 1 Upper roll diameter: 56 mm Length: 1400 mm Width: 700 mm Height: 1120 mm Weight: 185 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 1
Upper roll diameter: 56 mm
Length: 1400 mm
Width: 700 mm
Height: 1120 mm
Weight: 185 kg
1
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN RM 12

HESSE by ISITAN RM 1270 x 90
Bending length: 1270 mm Max. bending capacity - mild steel: 2.5 Upper roll diameter: 90 mm Bending speed: 6 m/min Motor power: 1.1 kW Length: 1850 mm Width: 700 mm Height: 1200 mm Weight: 520 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 2.5
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1850 mm
Width: 700 mm
Height: 1200 mm
Weight: 520 kg
6
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN RM 15

HESSE by ISITAN RM 1550 x 90
Bending length: 1550 mm Max. bending capacity - mild steel: 2 Upper roll diameter: 90 mm Bending speed: 6 m/min Motor power: 1.5 kW Length: 2130 mm Width: 700 mm Height: 1200 mm Weight: 545 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg
2
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1270 x 140
Bending length: 1270 mm Max. bending capacity - mild steel: 5 Upper roll diameter: 140 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 2470 mm Width: 750 mm Height: 1000 mm Weight: 1350 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 5
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1350 kg
2
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1550 x 140
Bending length: 1550 mm Max. bending capacity - mild steel: 4 Upper roll diameter: 140 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 2700 mm Width: 750 mm Height: 1000 mm Weight: 1420 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 140 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2700 mm
Width: 750 mm
Height: 1000 mm
Weight: 1420 kg
2
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1270 x 120
Bending length: 1270 mm Max. bending capacity - mild steel: 4 Upper roll diameter: 120 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 2470 mm Width: 750 mm Height: 1000 mm Weight: 1110 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 120 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 2470 mm
Width: 750 mm
Height: 1000 mm
Weight: 1110 kg
2
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 1

HESSE by ISITAN IRM 1050 x 110
Bending length: 1050 mm Max. bending capacity - mild steel: 4 Upper roll diameter: 110 mm Motor power: 2.2 kW Length: 1100 mm Width: 750 mm Height: 1000 mm Weight: 990 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 4
Upper roll diameter: 110 mm
Motor power: 2.2 kW
Length: 1100 mm
Width: 750 mm
Height: 1000 mm
Weight: 990 kg
1
Sheet metal working machinesRound rolling machines

Motorized 3-roll plate bending machine HESSE by ISITAN IRM 2

HESSE by ISITAN IRM 2050 x 130
Bending length: 2050 mm Max. bending capacity - mild steel: 3 Upper roll diameter: 130 mm Bending speed: 3 m/min Motor power: 2.2 kW Length: 3200 mm Width: 750 mm Height: 1000 mm Weight: 1500 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
3
Sheet metal working machinesPress brakes

Workshop press with bending device HESSE by LFSS AP 1020/150

HESSE by LFSS AP 1020/150
pressing capacity: 150 to Bending length: 1000 mm Stroke: 300 mm Motor power: 11 kW Die: 1 Distance between table and toolholder: 610 mm Distance between columns: 1020 mm Working speed: 5 mm/s Rapid speed: 10 mm/s Max. bending capacity (mild steel): 8 mm Hole in table: 100 mm Hole distance: 190 mm Length: 2110 mm Width: 1000 mm Height: 2450 mm Weight: 2400 kg
pressing capacity: 150 to
Bending length: 1000 mm
Stroke: 300 mm
Motor power: 11 kW
Die: 1
Distance between table and toolholder: 610 mm
Distance between columns: 1020 mm
Working speed: 5 mm/s
Rapid speed: 10 mm/s
Max. bending capacity (mild steel): 8 mm
Hole in table: 100 mm
Hole distance: 190 mm
Length: 2110 mm
Width: 1000 mm
Height: 2450 mm
Weight: 2400 kg
1
Sheet metal working machinesNotching machines

Ausklinkmaschine mit fixem Winkel TOOLPOWER MFN 1030

TOOLPOWER MFN 1030
Blade length: 100 mm Sheet thickness (420 N/mm²): 3 mm Angle: 90 ° Weight: 90 kg
Blade length: 100 mm
Sheet thickness (420 N/mm²): 3 mm
Angle: 90 °
Weight: 90 kg
10
Sheet metal working machinesPlate shears

Tafelschere - hydraulisch

Weinbrenner TSV204100
Blechbreite: 4050 mmBlechstärke: 20 mmStänderweite: 4100 mmStänderdurchgang: 4200 mmHubzahl: 10-20 Hub/minArbeitsdruck: 250 barGesamtleistungsbedarf: 85 kWMaschinengewicht ca.: 43,6 tRaumbedarf ca.: 5,5x2,8x2,9 m
Blechbreite: 4050 mm
Blechstärke: 20 mm
Ständerweite: 4100 mm
Ständerdurchgang: 4200 mm
Hubzahl: 10-20 Hub/min
Arbeitsdruck: 250 bar
Gesamtleistungsbedarf: 85 kW
Maschinengewicht ca.: 43,6 t
Raumbedarf ca.: 5,5x2,8x2,9 m
3
Sheet metal working machinesSwivel bending machines

Hydraulic folding machine FINTEK AMH 2065

FINTEK AMH 2065
Bending length: 2035 mm Sheet thickness (420 N/mm²): 6.5 mm Antrieb: Hydraulic Max. bending angle: 135 ° Length: 3300 mm Width: 1550 mm Height: 1900 mm Weight: 3710 kg
Bending length: 2035 mm
Sheet thickness (420 N/mm²): 6.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Length: 3300 mm
Width: 1550 mm
Height: 1900 mm
Weight: 3710 kg
5
Sheet metal working machinesSwivel bending machines

Hydraulic folding machine FINTEK AMH-K 3135

FINTEK AMH-K 3135
Bending length: 3100 mm Sheet thickness (420 N/mm²): 3.5 mm Antrieb: Hydraulic Max. bending angle: 135 ° Back gauge: 800 mm Length: 4300 mm Width: 1770 mm Height: 1890 mm Weight: 4520 kg
Bending length: 3100 mm
Sheet thickness (420 N/mm²): 3.5 mm
Antrieb: Hydraulic
Max. bending angle: 135 °
Back gauge: 800 mm
Length: 4300 mm
Width: 1770 mm
Height: 1890 mm
Weight: 4520 kg
4
Sheet metal working machinesPlate shears

Motorized plate shear HM Machinery HM JBS 2000/3

HM Machinery HM JBS 2000/3
Cutting length: 2025 mm Max. thickness - mild steel: 3 mm Back gauge: 500 mm Motor power: 4 kW Length: 2500 mm Width: 1720 mm Height: 1200 mm Weight: 1100 kg
Cutting length: 2025 mm
Max. thickness - mild steel: 3 mm
Back gauge: 500 mm
Motor power: 4 kW
Length: 2500 mm
Width: 1720 mm
Height: 1200 mm
Weight: 1100 kg
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-3139

FACCIN 4HEL-3139
Bending length: 3050 mm Max. bending capacity - mild steel: 25 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 18 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-3134

FACCIN 4HEL-3134
Bending length: 3050 mm Max. bending capacity - mild steel: 16 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 10 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 11 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 11 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-3128

FACCIN 4HEL-3128
Bending length: 3050 mm Max. bending capacity - mild steel: 12 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 6.5 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 8 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 12
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 12 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 6.5 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 8 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-3122

FACCIN 4HEL-3122
Bending length: 3050 mm Max. bending capacity - mild steel: 7 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 5 mm
Bending length: 3050 mm
Max. bending capacity - mild steel: 7
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 7 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 5 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2539

FACCIN 4HEL-2539
Bending length: 2500 mm Max. bending capacity - mild steel: 27 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 27
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 27 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 18 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 23 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 20 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2534

FACCIN 4HEL-2534
Bending length: 2500 mm Max. bending capacity - mild steel: 20 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2528

FACCIN 4HEL-2528
Bending length: 2500 mm Max. bending capacity - mild steel: 14 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 14
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 14 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 8.4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 9 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2522

FACCIN 4HEL-2522
Bending length: 2500 mm Max. bending capacity - mild steel: 8 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm
Bending length: 2500 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4.9 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2139

FACCIN 4HEL-2139
Bending length: 2000 mm Max. bending capacity - mild steel: 28 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 28 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 22 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 26 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 23 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 28
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 28 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 22 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 26 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 23 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2134

FACCIN 4HEL-2134
Bending length: 2000 mm Max. bending capacity - mild steel: 22 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 22 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 19 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 17 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 22
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 22 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 19 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 17 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2128

FACCIN 4HEL-2128
Bending length: 2000 mm Max. bending capacity - mild steel: 18 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 18 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12.1 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 18
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 18 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 12.1 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 15 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 13 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2017

FACCIN 4HEL-2017
Bending length: 2000 mm Max. bending capacity - mild steel: 6 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4.5 mm
Bending length: 2000 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4.5 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-1614

FACCIN 4HEL-1614
Bending length: 1500 mm Max. bending capacity - mild steel: 6 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Bending length: 1500 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 4 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 5 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 4 mm
3
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine FACCIN 4HEL-2122

FACCIN 4HEL-2122
Bending length: 2000 mm Max. bending capacity - mild steel: 11 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm Upper roll diameter: 225 mm Lower roll diameter: 215 mm Lateral roll diameter: 165 mm Bending speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg
Bending length: 2000 mm
Max. bending capacity - mild steel: 11
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 11 mm
Max. plate thickness without prebending at D=1,3x upper roll diam. - mild steel: 7 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,3x upper roll diam. - mild steel: 6.4 mm
Upper roll diameter: 225 mm
Lower roll diameter: 215 mm
Lateral roll diameter: 165 mm
Bending speed: 8 m/min
Length: 3950 mm
Width: 1200 mm
Height: 1200 mm
Weight: 4450 kg
5
Sheet metal working machinesRound rolling machines

Motorized 4-roll plate bending machine HESSE by ISITAN 4R HM

HESSE by ISITAN 4R HMS 2050x130
Bending length: 2050 mm Max. bending capacity - mild steel: 4 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm Upper roll diameter: 130 mm Lower roll diameter: 130 mm Lateral roll diameter: 130 mm Bending speed: 5 m/min Motor power: 2,2 + 1,1 kW Length: 3800 mm Width: 1150 mm Height: 1110 mm Weight: 2450 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 4
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 4 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 3 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 2 mm
Upper roll diameter: 130 mm
Lower roll diameter: 130 mm
Lateral roll diameter: 130 mm
Bending speed: 5 m/min
Motor power: 2,2 + 1,1 kW
Length: 3800 mm
Width: 1150 mm
Height: 1110 mm
Weight: 2450 kg
3
Sheet metal working machinesSection steel shears

Hydraulic steelworker GEKA Bendicrop 60 S

GEKA Bendicrop 60 S
Punching power: 60 ton Throat depth: 250 mm Number of stations: 5 Max. diameter at sheet thickness (mild steel): 40 x 11 mm Strokes: 32 1/min Flat steel: 350 x 15 mm Angle steel: 120 x 10 mm Round / square steel: 45 / 40 mm Notcher: 10 mm Bending unit: max. 150x10 mm Motor: 5.5 kW Length: 1850 mm Width: 1300 mm Height: 2100 mm Weight: 1390 kg
Punching power: 60 ton
Throat depth: 250 mm
Number of stations: 5
Max. diameter at sheet thickness (mild steel): 40 x 11 mm
Strokes: 32 1/min
Flat steel: 350 x 15 mm
Angle steel: 120 x 10 mm
Round / square steel: 45 / 40 mm
Notcher: 10 mm
Bending unit: max. 150x10 mm
Motor: 5.5 kW
Length: 1850 mm
Width: 1300 mm
Height: 2100 mm
Weight: 1390 kg
6
Sheet metal working machinesSwivel bending machines

Electric long folding machine BIEGEMASTER BENDTRON 6.1,50

BIEGEMASTER BENDTRON 6.1,50
Bending length: 6400 mm Bending capacity steel 400 N/mm²: 1.5 mm Bending capacity Alu 190 N/mm²: 2 mm No. of stand and tension arm units: 6
Bending length: 6400 mm
Bending capacity steel 400 N/mm²: 1.5 mm
Bending capacity Alu 190 N/mm²: 2 mm
No. of stand and tension arm units: 6
2
Sheet metal working machines

Hydraulic portal straightening press SICMI PMM 400 ME

SICMI PMM 400 ME
pressing capacity: 400 to Stroke: 500 mm Table: 4.000 x 2.550 mm Daylight: 700 mm Rapid speed: 20 mm/s Working speed: 2 mm/s Cylinder fix or moveable: horizontal moveable Distance between columns: 2550 mm Horizontal movable cylinder: 1.8 mm Hydraulicaly movable stand: 2.9 mm Length: 4000 mm Width: 4000 mm Height: 2600 mm Weight: 20500 kg
pressing capacity: 400 to
Stroke: 500 mm
Table: 4.000 x 2.550 mm
Daylight: 700 mm
Rapid speed: 20 mm/s
Working speed: 2 mm/s
Cylinder fix or moveable: horizontal moveable
Distance between columns: 2550 mm
Horizontal movable cylinder: 1.8 mm
Hydraulicaly movable stand: 2.9 mm
Length: 4000 mm
Width: 4000 mm
Height: 2600 mm
Weight: 20500 kg
1
Sheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Megabender MG

ERCOLINA Megabender MG 030 V2T
Flexion modulus: 15 cm³ Standard steel tube: 76 x 3 mm Gas tube: 2"1/2 x 4 mm Furniture tube: 76 x 3 mm FE35 (for hydraulic tubes): 70 x 5 mm Stainless steel AISI304-318: 70 x 4 mm Stainless steel AISI308 (food industry): 76 x 1,6 mm Brass soft: 76 x 4 mm Hard copper and aluminium: 76 x 6 mm Soft copper: 76 x 6 mm Conduit tube (TAZ): 73 x 4 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 45 mm Squarebar solid (S275JO): 40 x 40 mm Flatsteel solid (S275JO): 10 x 90 mm Square profile (S275JO): 30 x 60 x 3 bzw. 60 x 60 x 3 mm T-profile (S275JO): 60 x 60 x 6 mm U-profile (S275JO): 50 x 20 x 6 mm Max. bending radius: 380 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 2/4 r/min Motor: 3.5 kW Length: 370 mm Width: 680 mm Height: 910 mm Weight: 193 kg
Flexion modulus: 15 cm³
Standard steel tube: 76 x 3 mm
Gas tube: 2"1/2 x 4 mm
Furniture tube: 76 x 3 mm
FE35 (for hydraulic tubes): 70 x 5 mm
Stainless steel AISI304-318: 70 x 4 mm
Stainless steel AISI308 (food industry): 76 x 1,6 mm
Brass soft: 76 x 4 mm
Hard copper and aluminium: 76 x 6 mm
Soft copper: 76 x 6 mm
Conduit tube (TAZ): 73 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 45 mm
Squarebar solid (S275JO): 40 x 40 mm
Flatsteel solid (S275JO): 10 x 90 mm
Square profile (S275JO): 30 x 60 x 3 bzw. 60 x 60 x 3 mm
T-profile (S275JO): 60 x 60 x 6 mm
U-profile (S275JO): 50 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 2/4 r/min
Motor: 3.5 kW
Length: 370 mm
Width: 680 mm
Height: 910 mm
Weight: 193 kg
2
Sheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Topbender TB 6

ERCOLINA Topbender TB 60 T
Flexion modulus: 10 cm³ Standard steel tube: 60 x 4 mm Gas tube: 2" x 4 mm Furniture tube: 60 x 4 mm FE35 (for hydraulic tubes): 64 x 5 mm Stainless steel AISI304-318: 64 x 3 mm Stainless steel AISI308 (food industry): 60 x 3 mm Brass soft: 60 x 6 mm Hard copper and aluminium: 64 x 6 mm Soft copper: 64 x 6 mm Conduit tube (TAZ): 63 x 4 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 35 mm Squarebar solid (S275JO): 30 x 30 mm Flatsteel solid (S275JO): 14 x 60 mm Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm T-profile (S275JO): 50 x 50 x 6 mm U-profile (S275JO): 40 x 20 x 6 mm Max. bending radius: 380 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 1,5 / 3 r/min Motor: 1.5 kW Length: 500 mm Width: 760 mm Height: 1000 mm Weight: 186 kg
Flexion modulus: 10 cm³
Standard steel tube: 60 x 4 mm
Gas tube: 2" x 4 mm
Furniture tube: 60 x 4 mm
FE35 (for hydraulic tubes): 64 x 5 mm
Stainless steel AISI304-318: 64 x 3 mm
Stainless steel AISI308 (food industry): 60 x 3 mm
Brass soft: 60 x 6 mm
Hard copper and aluminium: 64 x 6 mm
Soft copper: 64 x 6 mm
Conduit tube (TAZ): 63 x 4 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 35 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 14 x 60 mm
Square profile (S275JO): 25 x 50 x 3 bzw. 50 x 50 x 3 mm
T-profile (S275JO): 50 x 50 x 6 mm
U-profile (S275JO): 40 x 20 x 6 mm
Max. bending radius: 380 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 1,5 / 3 r/min
Motor: 1.5 kW
Length: 500 mm
Width: 760 mm
Height: 1000 mm
Weight: 186 kg
5
Sheet metal working machinesRound rolling machines

Hydraulic 4-roll plate bending machine HESSE by SAHINLER 4R

HESSE by SAHINLER 4R HSS 20-280
Bending length: 2050 mm Max. bending capacity - mild steel: 20 Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm Upper roll diameter: 280 mm Lower roll diameter: 280 mm Lateral roll diameter: 220 mm Bending speed: 1,5 / 5 m/min Motor power: 16 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8550 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 280 mm
Lower roll diameter: 280 mm
Lateral roll diameter: 220 mm
Bending speed: 1,5 / 5 m/min
Motor power: 16 kW
Length: 4350 mm
Width: 1700 mm
Height: 1850 mm
Weight: 8550 kg
5
Sheet metal working machinesPlate shears

Motorized plate shear HESSE by DURMA RGM 1303

HESSE by DURMA RGM 1303
Cutting length: 1350 mm Max. thickness - mild steel: 3 mm Strokes: 35 1/min Cutting angle: 1 ° Back gauge: 550 mm Motor power: 3 kW Support arms: 2 pcs. Table height: 850 mm Table width: 400 mm Length: 1700 mm Width: 1350 mm Height: 1200 mm Weight: 950 kg
Cutting length: 1350 mm
Max. thickness - mild steel: 3 mm
Strokes: 35 1/min
Cutting angle: 1 °
Back gauge: 550 mm
Motor power: 3 kW
Support arms: 2 pcs.
Table height: 850 mm
Table width: 400 mm
Length: 1700 mm
Width: 1350 mm
Height: 1200 mm
Weight: 950 kg
5
Sheet metal working machinesPress brakes

Hydraulic CNC press brake HESSE by DURMA PBF 30200

HESSE by DURMA PBF 30200
pressing capacity: 200 to Bending length: 3050 mm Axes: Y1 / Y2 / X and R-axis Stroke: 210 mm Inside distance between side frames: 2550 mm Gap in side frame: 250 mm Daylight: 445 mm Power concept: hydraulic rapid speed Y-axis: 100 mm/s Working speed Y-axis: 7 Retractionspeed Y-axis: 73 Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm Back gauge speed X-axis: 250 Table height: 858 mm Table width: 104 mm Oiltank: 150 l Motor power: 15 kW Length: 3750 mm Width: 1390 mm Height: 2500 mm Weight: 8160 kg
pressing capacity: 200 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R-axis
Stroke: 210 mm
Inside distance between side frames: 2550 mm
Gap in side frame: 250 mm
Daylight: 445 mm
Power concept: hydraulic
rapid speed Y-axis: 100 mm/s
Working speed Y-axis: 7
Retractionspeed Y-axis: 73
Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
Back gauge speed X-axis: 250
Table height: 858 mm
Table width: 104 mm
Oiltank: 150 l
Motor power: 15 kW
Length: 3750 mm
Width: 1390 mm
Height: 2500 mm
Weight: 8160 kg
1
Sheet metal working machinesPipe-bending machines

Tube bending machine without mandrel ERCOLINA Superbender SB

ERCOLINA Superbender SB 48T
Flexion modulus: 6 cm³ Standard steel tube: 48 x 3,5 mm Gas tube: 1"1/2 x 3.68 mm Furniture tube: 54 x 1,5 mm FE35 (for hydraulic tubes): 50 x 4 mm Stainless steel AISI304-318: 50 x 3 mm Stainless steel AISI308 (food industry): 40 x 2,5 mm Brass soft: 60 x 3 mm Hard copper and aluminium: 64 x 2 mm Soft copper: 64 x 2 mm Conduit tube (TAZ): 60 x 2 mm Mepla, Gebereit and similar: 50 x 4 mm Roundbar solid (S275JO): 32 mm Squarebar solid (S275JO): 30 x 30 mm Flatsteel solid (S275JO): 8 x 48 mm Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm T-profile (S275JO): 40 x 40 x 5 mm U-profile (S275JO): 32 x 16 x 5 mm Max. bending radius: 300 mm Min. bending radius: 10 mm Min. tube Ø: 10 mm Max. bending speed: 4 r/min Motor: 1.5 kW Length: 570 mm Width: 410 mm Height: 1000 mm Weight: 110 kg
Flexion modulus: 6 cm³
Standard steel tube: 48 x 3,5 mm
Gas tube: 1"1/2 x 3.68 mm
Furniture tube: 54 x 1,5 mm
FE35 (for hydraulic tubes): 50 x 4 mm
Stainless steel AISI304-318: 50 x 3 mm
Stainless steel AISI308 (food industry): 40 x 2,5 mm
Brass soft: 60 x 3 mm
Hard copper and aluminium: 64 x 2 mm
Soft copper: 64 x 2 mm
Conduit tube (TAZ): 60 x 2 mm
Mepla, Gebereit and similar: 50 x 4 mm
Roundbar solid (S275JO): 32 mm
Squarebar solid (S275JO): 30 x 30 mm
Flatsteel solid (S275JO): 8 x 48 mm
Square profile (S275JO): 20 x 40 x 3 bzw. 40 x 40 x 3 mm
T-profile (S275JO): 40 x 40 x 5 mm
U-profile (S275JO): 32 x 16 x 5 mm
Max. bending radius: 300 mm
Min. bending radius: 10 mm
Min. tube Ø: 10 mm
Max. bending speed: 4 r/min
Motor: 1.5 kW
Length: 570 mm
Width: 410 mm
Height: 1000 mm
Weight: 110 kg
10
Sheet metal working machinesPress brakes

Abkantpresse - hydraulisch

HACO PPES 40400
Druck: 400 tAbkantlänge: 4000 mmStänderweite: 3500 mmSteuerung: CNCTyp: BC 25 GraphicAusladung: 400 mmGesamtleistungsbedarf: kWMaschinengewicht ca.: 25 tRaumbedarf ca.: m
Druck: 400 t
Abkantlänge: 4000 mm
Ständerweite: 3500 mm
Steuerung: CNC
Typ: BC 25 Graphic
Ausladung: 400 mm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 25 t
Raumbedarf ca.: m
8
Sheet metal working machinesBending machines

Profile bending machine with hydraulic feed of rolls HESSE b

HESSE by DURMA PBH 80
Shaft diameter: 85 Rolls diameter: 247 mm Driven rolls: 3 Motor power: 7.5 kW Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm Form tube square (section / min. diameter): 70x70x4 mm Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm Length: 1580 mm Width: 1200 mm Height: 1410 mm Weight: 2350 kg
Shaft diameter: 85
Rolls diameter: 247 mm
Driven rolls: 3
Motor power: 7.5 kW
Flat steel vertical position (section / min. diameter): 80x20 mm / 500 mm, 30x10 mm / 350 mm
Flat steel horizontal position (section / min. diameter): 120x30 mm / 650 mm, 50x10 mm / 300 mm
Square bar (section / min. diameter): 50x50 mm / 500 mm, 30x30 mm / 350 mm
Round bar (section / min. diameter): Ø 50 mm / 500 mm, Ø 20 mm / 350 mm
Tube (section / min. diameter): Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm
Form tube vertical position (Querschnitt / min. Durchmesser): 80x40x4 mm
Form tube square (section / min. diameter): 70x70x4 mm
Angle leg outside (Querschnitt / min. Durchmesser): 80x8 mm / 1.200 mm, 30x3 mm / 450 mm
Angle leg inside (section / min. diameter): 80x8 mm / 800 mm, 30x3 mm / 450 mm
Length: 1580 mm
Width: 1200 mm
Height: 1410 mm
Weight: 2350 kg
Save search
  • You will receive free new offers by e-mail
  • You can end the search request at any time
  • Your email address will not be shared with third parties under any circumstances
Here you can advertise.
Contact us for a non-binding offer.
Get offer
Not yet registered ?

Click on the "More Information" button to find out more about our services and prices.

For each of our offered tariffs there is a trial period of 6 months. Try us for free !
Sign up now for free