8
Obróbka metali i obrabiarkiTokarkiTokarki
Umlaufdurchmesser: 2200 mmSpitzenweite: 9500 mmDrehdurchmesser über Bett: . mmDrehdurchmesser über Support: . mmDrehlänge: . mmWerkstückgewicht: 70 tDrehzahl: . U/minVierbackenfutter Durchmesser: 2100 mmSteuerung: SiemensTyp: Sinumerik 850 T mmGetriebestufen: .Gesamtleistungsbedarf: . kWMaschinengewicht ca.: . tRaumbedarf ca.: m
Umlaufdurchmesser: 2200 mm
Spitzenweite: 9500 mm
Drehdurchmesser über Bett: . mm
Drehdurchmesser über Support: . mm
Drehlänge: . mm
Werkstückgewicht: 70 t
Drehzahl: . U/min
Vierbackenfutter Durchmesser: 2100 mm
Steuerung: Siemens
Typ: Sinumerik 850 T mm
Getriebestufen: .
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Spitzenweite: 9500 mm
Drehdurchmesser über Bett: . mm
Drehdurchmesser über Support: . mm
Drehlänge: . mm
Werkstückgewicht: 70 t
Drehzahl: . U/min
Vierbackenfutter Durchmesser: 2100 mm
Steuerung: Siemens
Typ: Sinumerik 850 T mm
Getriebestufen: .
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
Maszyny do przetwórstwa tworzyw sztucznychWtryskarki
Ref. no.: 18627Manufacturer: BATTENFELDYear of construction: 2007Clamping unitClamping force: 100 tonOpening stroke: 500 mmDistance between tie bars: 470 x 420 mmMould height min.: 250 mmInjection unitScrew diameter: 22 + 14 mmInjection volume: 47 +13 cm³Shot weight: 45 + 12 gInjection pressure: 2860 + 3000 barMeasurements and weightDimensions: 4,1 x 1,5 x 2,4 mMachine weight: 5000 kgFurther information:2K Co-Injection Moulding MachineThis machine from the prestigious Austrian manufacturer Battenfeld is a 2007 horizontal injection moulding machine with 100 tonnes clamping force and a special Co-Injection (Sandwich Injection) configuration.How Does Co-Injection Work?The two injection units do not operate independently — they meet inside a combined nozzle. First, Unit A injects: the first material adheres to the mould wall and forms the outer skin. Then Unit B follows: the second material flows into the core of the first, pushing it forward. The result is a part with an outer skin of Material 1 and a core of Material 2. If both materials are injected simultaneously or overlapping, a decorative marble or blended colour effect is achieved. The entire process takes place in a single cycle with a standard mould — no expensive rotary platen tooling is required.In the current production of this machine, Unit A feeds green and Unit B feeds yellow material of the same plastic type, both injected simultaneously through a single combined nozzle into the mould. As the green and yellow materials flow side by side and into each other, a natural marbled colour effect is created on the part surface. Permanent and visually appealing coloured surfaces are produced in a single cycle — no labels or post-painting required.
Ref. no.: 18627
Manufacturer: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 100 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 250 mm
Injection unit
Screw diameter: 22 + 14 mm
Injection volume: 47 +13 cm³
Shot weight: 45 + 12 g
Injection pressure: 2860 + 3000 bar
Measurements and weight
Dimensions: 4,1 x 1,5 x 2,4 m
Machine weight: 5000 kg
Further information:
2K Co-Injection Moulding Machine
This machine from the prestigious Austrian manufacturer Battenfeld is a 2007 horizontal injection moulding machine with 100 tonnes clamping force and a special Co-Injection (Sandwich Injection) configuration.
How Does Co-Injection Work?
The two injection units do not operate independently — they meet inside a combined nozzle. First, Unit A injects: the first material adheres to the mould wall and forms the outer skin. Then Unit B follows: the second material flows into the core of the first, pushing it forward. The result is a part with an outer skin of Material 1 and a core of Material 2. If both materials are injected simultaneously or overlapping, a decorative marble or blended colour effect is achieved. The entire process takes place in a single cycle with a standard mould — no expensive rotary platen tooling is required.
In the current production of this machine, Unit A feeds green and Unit B feeds yellow material of the same plastic type, both injected simultaneously through a single combined nozzle into the mould. As the green and yellow materials flow side by side and into each other, a natural marbled colour effect is created on the part surface. Permanent and visually appealing coloured surfaces are produced in a single cycle — no labels or post-painting required.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: BATTENFELD
Year of construction: 2007
Clamping unit
Clamping force: 100 ton
Opening stroke: 500 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 250 mm
Injection unit
Screw diameter: 22 + 14 mm
Injection volume: 47 +13 cm³
Shot weight: 45 + 12 g
Injection pressure: 2860 + 3000 bar
Measurements and weight
Dimensions: 4,1 x 1,5 x 2,4 m
Machine weight: 5000 kg
Further information:
2K Co-Injection Moulding Machine
This machine from the prestigious Austrian manufacturer Battenfeld is a 2007 horizontal injection moulding machine with 100 tonnes clamping force and a special Co-Injection (Sandwich Injection) configuration.
How Does Co-Injection Work?
The two injection units do not operate independently — they meet inside a combined nozzle. First, Unit A injects: the first material adheres to the mould wall and forms the outer skin. Then Unit B follows: the second material flows into the core of the first, pushing it forward. The result is a part with an outer skin of Material 1 and a core of Material 2. If both materials are injected simultaneously or overlapping, a decorative marble or blended colour effect is achieved. The entire process takes place in a single cycle with a standard mould — no expensive rotary platen tooling is required.
In the current production of this machine, Unit A feeds green and Unit B feeds yellow material of the same plastic type, both injected simultaneously through a single combined nozzle into the mould. As the green and yellow materials flow side by side and into each other, a natural marbled colour effect is created on the part surface. Permanent and visually appealing coloured surfaces are produced in a single cycle — no labels or post-painting required.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
11
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18617Manufacturer: DEMAGYear of construction: 2007Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 25 mmInjection volume: 51 cm³Shot weight: 45 gInjection pressure: 2000 barMeasurements and weightDimensions: 4,3 x 1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.Motor System — Siemens MOTICS 3Main Drive Motor · Water-Cooled Servo MotorThe main drive unit that controls all clamping and injection movements with high precision.Plasticising Motor · Water-Cooled Servo MotorBased on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.5-Axis Full Servo ControlThe machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.NC4 Control SystemThe keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ref. no.: 18617
Manufacturer: DEMAG
Year of construction: 2007
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar
Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2007
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar
Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18616Manufacturer: DEMAGYear of construction: 2007Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 25 mmInjection volume: 51 cm³Shot weight: 45 gInjection pressure: 2000 barMeasurements and weightDimensions: 4,3 x 1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.Motor System — Siemens MOTICS 3Main Drive Motor · Water-Cooled Servo MotorThe main drive unit that controls all clamping and injection movements with high precision.Plasticising Motor · Water-Cooled Servo MotorBased on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.5-Axis Full Servo ControlThe machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.NC4 Control SystemThe keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ref. no.: 18616
Manufacturer: DEMAG
Year of construction: 2007
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar
Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2007
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar
Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18615Manufacturer: DEMAGYear of construction: 2007Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 25 mmInjection volume: 51 cm³Shot weight: 45 gInjection pressure: 2000 barMeasurements and weightDimensions: 4,3 x 1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.Motor System — Siemens MOTICS 3Main Drive Motor · Water-Cooled Servo MotorThe main drive unit that controls all clamping and injection movements with high precision.Plasticising Motor · Water-Cooled Servo MotorBased on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.5-Axis Full Servo ControlThe machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.NC4 Control SystemThe keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ref. no.: 18615
Manufacturer: DEMAG
Year of construction: 2007
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar
Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2007
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 25 mm
Injection volume: 51 cm³
Shot weight: 45 g
Injection pressure: 2000 bar
Measurements and weight
Dimensions: 4,3 x 1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
8
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18614Manufacturer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 18 mmInjection volume: 26 cm³Shot weight: 23 gInjection pressure: 2800 barMeasurements and weightDimensions: 4,3 x1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.Motor System — Siemens MOTICS 3Main Drive Motor · Water-Cooled Servo MotorThe main drive unit that controls all clamping and injection movements with high precision.Plasticising Motor · Water-Cooled Servo MotorBased on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.5-Axis Full Servo ControlThe machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.NC4 Control SystemThe keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ref. no.: 18614
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 26 cm³
Shot weight: 23 g
Injection pressure: 2800 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 18 mm
Injection volume: 26 cm³
Shot weight: 23 g
Injection pressure: 2800 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18613Manufacturer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 30 mmInjection volume: 74 cm³Shot weight: 60 gInjection pressure: 1390 barMeasurements and weightDimensions: 4,3 x1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.Motor System — Siemens MOTICS 3Main Drive Motor · Water-Cooled Servo MotorThe main drive unit that controls all clamping and injection movements with high precision.Plasticising Motor · Water-Cooled Servo MotorBased on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.5-Axis Full Servo ControlThe machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.NC4 Control SystemThe keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ref. no.: 18613
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 74 cm³
Shot weight: 60 g
Injection pressure: 1390 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 74 cm³
Shot weight: 60 g
Injection pressure: 1390 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18612Manufacturer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 22 mmInjection volume: 39 cm³Shot weight: 35 gInjection pressure: 2500 barMeasurements and weightDimensions: 4,3 x1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.Motor System — Siemens MOTICS 3Main Drive Motor · Water-Cooled Servo MotorThe main drive unit that controls all clamping and injection movements with high precision.Plasticising Motor · Water-Cooled Servo MotorBased on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.5-Axis Full Servo ControlThe machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.NC4 Control SystemThe keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ref. no.: 18612
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 340 mm
Distance between tie bars: 370 x 370 mm
Mould height min.: 150 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 39 cm³
Shot weight: 35 g
Injection pressure: 2500 bar
Measurements and weight
Dimensions: 4,3 x1,3 x 2,3 m
Machine weight: 4750 kg
Further information:
A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision
The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs.
Motor System — Siemens MOTICS 3
Main Drive Motor · Water-Cooled Servo Motor
The main drive unit that controls all clamping and injection movements with high precision.
Plasticising Motor · Water-Cooled Servo Motor
Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production.
5-Axis Full Servo Control
The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems.
NC4 Control System
The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18138Manufacturer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 850 mmDistance between tie bars: 370 X 370 mmMould height min.: 200 mmMould height max.: 510 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 22 mmInjection volume: 37 cm³Shot weight: 32 gInjection pressure: 2580 barMeasurements and weightDimensions: 4,50 X 1,28 X 1,95 mMachine weight: 4750 kg
Ref. no.: 18138
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2006
Clamping unit
Clamping force: 80 ton
Opening stroke: 850 mm
Distance between tie bars: 370 X 370 mm
Mould height min.: 200 mm
Mould height max.: 510 mm
Platen size (h x v): 600 x 600 mm
Injection unit
Screw diameter: 22 mm
Injection volume: 37 cm³
Shot weight: 32 g
Injection pressure: 2580 bar
Measurements and weight
Dimensions: 4,50 X 1,28 X 1,95 m
Machine weight: 4750 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
7
Maszyny spożywczeUrządzenia do mieszania
Joni OP200 electric steam jacketed mixing kettle, 2015, DC Norris / Joni OP200, stainless, 200L with agitation and scrap surface, perfect for cooking and mixing stocks, soups, sauces, preserves, pastry fillings and more, can either use tap or tilt to discharge, 3Ph
Joni OP200 electric steam jacketed mixing kettle, 2015, DC Norris / Joni OP200, stainless, 200L with agitation and scrap surface, perfect for cooking and mixing stocks, soups, sauces, preserves, pastry fillings and more, can either use tap or tilt to discharge, 3Ph
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
7
Maszyny spożywczeInne
Riggs 1000 Twin head depositor, 2016, Stainless frame, twin head depositor, one head fills from 50ml to 600ml and the other from 125ml to 1200ml, on mobile scissor lift table
Riggs 1000 Twin head depositor, 2016, Stainless frame, twin head depositor, one head fills from 50ml to 600ml and the other from 125ml to 1200ml, on mobile scissor lift table
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18625Manufacturer: WITTMANN BATTENFELDYear of construction: 2011Clamping unitClamping force: 110 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 450 mmPlaten size (h x v): 680 x 663 mmInjection unitScrew diameter: 30 mmInjection volume: 88 cm³Shot weight: 80 gInjection pressure: 1471 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 4600 kgFurther information:Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.Compared to conventional hydraulic injection moulding machines, the EcoPower series can achieve approximately 60% up to 80% energy savings depending on the application. In addition, the machines offer lower heat generation, quiet operation and a cleaner production environment.The integrated UNILOG B6 / B6P control system is well known for its user-friendly operation, reliable process management and stable long-term performance. Combined with high dynamic servo technology and low-vibration operation, the EcoPower platform is especially suitable for technical plastic parts, electronic components, automotive applications and medical production.Today, the Wittmann Battenfeld EcoPower series is still considered one of the most reliable and energy-efficient all-electric injection moulding machine platforms on the market.
Ref. no.: 18625
Manufacturer: WITTMANN BATTENFELD
Year of construction: 2011
Clamping unit
Clamping force: 110 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 450 mm
Platen size (h x v): 680 x 663 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 88 cm³
Shot weight: 80 g
Injection pressure: 1471 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 4600 kg
Further information:
Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.
All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.
Compared to conventional hydraulic injection moulding machines, the EcoPower series can achieve approximately 60% up to 80% energy savings depending on the application. In addition, the machines offer lower heat generation, quiet operation and a cleaner production environment.
The integrated UNILOG B6 / B6P control system is well known for its user-friendly operation, reliable process management and stable long-term performance. Combined with high dynamic servo technology and low-vibration operation, the EcoPower platform is especially suitable for technical plastic parts, electronic components, automotive applications and medical production.
Today, the Wittmann Battenfeld EcoPower series is still considered one of the most reliable and energy-efficient all-electric injection moulding machine platforms on the market.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: WITTMANN BATTENFELD
Year of construction: 2011
Clamping unit
Clamping force: 110 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 450 mm
Platen size (h x v): 680 x 663 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 88 cm³
Shot weight: 80 g
Injection pressure: 1471 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 4600 kg
Further information:
Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.
All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.
Compared to conventional hydraulic injection moulding machines, the EcoPower series can achieve approximately 60% up to 80% energy savings depending on the application. In addition, the machines offer lower heat generation, quiet operation and a cleaner production environment.
The integrated UNILOG B6 / B6P control system is well known for its user-friendly operation, reliable process management and stable long-term performance. Combined with high dynamic servo technology and low-vibration operation, the EcoPower platform is especially suitable for technical plastic parts, electronic components, automotive applications and medical production.
Today, the Wittmann Battenfeld EcoPower series is still considered one of the most reliable and energy-efficient all-electric injection moulding machine platforms on the market.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
_thumb.png "Pokaż ogłoszenie")
8
Maszyny do przetwórstwa tworzyw sztucznychRoboty
Ref. no.: 18635Manufacturer: SEPROYear of construction: 2022Further information:SEPRO S5-25 med – 3-Axis Servo Linear Robot* Manufacturer: SEPRO Robotique S.A.S. (France)* Model: S5-25 med* Year of manufacture: 2022* Serial number: R015336-02* Condition: Very good and clean condition* Application: Injection moulding automation / part removal robotTechnical SpecificationsDescription ValueRobot type 3-axis servo linear robotX-axis (Traverse) 2000 mmY-axis 700 mmVertical stroke 1200 mmRotation No rotationPayload class approx. 10 kgControl system SEPRO Visual 2Voltage 3x400V – 3x480VFrequency 50/60 HzMax. power 1.5 kVAWeight approx. 100 kgSeries S5 medDescriptionThe SEPRO S5-25 med is a high-performance 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines.The robot is in very good technical and visual condition and comes from a clean production environment. The “med” version is particularly suitable for medical and clean-room applications.The robot has only been used for testing and training purposes.The system offers:* fast and precise movements* reliable servo technology* compact and stable construction* modern SEPRO Visual control system* ideal integration into injection moulding automation systemsSuitable for:* plastic injection moulding machines* medical production* clean-room applications* automated pick & place systems* high-speed handling applications
Ref. no.: 18635
Manufacturer: SEPRO
Year of construction: 2022
Further information:
SEPRO S5-25 med – 3-Axis Servo Linear Robot
* Manufacturer: SEPRO Robotique S.A.S. (France)
* Model: S5-25 med
* Year of manufacture: 2022
* Serial number: R015336-02
* Condition: Very good and clean condition
* Application: Injection moulding automation / part removal robot
Technical Specifications
Description Value
Robot type 3-axis servo linear robot
X-axis (Traverse) 2000 mm
Y-axis 700 mm
Vertical stroke 1200 mm
Rotation No rotation
Payload class approx. 10 kg
Control system SEPRO Visual 2
Voltage 3x400V – 3x480V
Frequency 50/60 Hz
Max. power 1.5 kVA
Weight approx. 100 kg
Series S5 med
Description
The SEPRO S5-25 med is a high-performance 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines.
The robot is in very good technical and visual condition and comes from a clean production environment. The “med” version is particularly suitable for medical and clean-room applications.
The robot has only been used for testing and training purposes.
The system offers:
* fast and precise movements
* reliable servo technology
* compact and stable construction
* modern SEPRO Visual control system
* ideal integration into injection moulding automation systems
Suitable for:
* plastic injection moulding machines
* medical production
* clean-room applications
* automated pick & place systems
* high-speed handling applications
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: SEPRO
Year of construction: 2022
Further information:
SEPRO S5-25 med – 3-Axis Servo Linear Robot
* Manufacturer: SEPRO Robotique S.A.S. (France)
* Model: S5-25 med
* Year of manufacture: 2022
* Serial number: R015336-02
* Condition: Very good and clean condition
* Application: Injection moulding automation / part removal robot
Technical Specifications
Description Value
Robot type 3-axis servo linear robot
X-axis (Traverse) 2000 mm
Y-axis 700 mm
Vertical stroke 1200 mm
Rotation No rotation
Payload class approx. 10 kg
Control system SEPRO Visual 2
Voltage 3x400V – 3x480V
Frequency 50/60 Hz
Max. power 1.5 kVA
Weight approx. 100 kg
Series S5 med
Description
The SEPRO S5-25 med is a high-performance 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines.
The robot is in very good technical and visual condition and comes from a clean production environment. The “med” version is particularly suitable for medical and clean-room applications.
The robot has only been used for testing and training purposes.
The system offers:
* fast and precise movements
* reliable servo technology
* compact and stable construction
* modern SEPRO Visual control system
* ideal integration into injection moulding automation systems
Suitable for:
* plastic injection moulding machines
* medical production
* clean-room applications
* automated pick & place systems
* high-speed handling applications
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
Maszyny do przetwórstwa tworzyw sztucznychUrządzenia peryferyjne
Ref. no.: 18439Manufacturer: MOTANYear of construction: 1995Further information:MOTAN Central Drying & Vacuum Conveying SystemComplete MOTAN central drying and automatic material conveying system for plastic injection molding applications.The system includes:* 15 pcs stainless steel drying hoppers* Hopper capacity: 60 liters eachThe system was used in technical plastics production and is suitable for processing hygroscopic materials such as:PA, PC, PET, PBT, ABS, TPU and other engineering plastics.System Components1. MOTAN ADC 200/10 Dry Air Generator* Year of manufacture: 1995* Dry air capacity: approx. 200 m³/h* Heating power: approx. 19.5 kW* Central dry air generation system* Desiccant drying technologyFunction:Provides low-humidity hot air for the drying hoppers.2. MOTAN LA net 200 Central Control System* Year of manufacture: 2006* Central process and automation control unit* Touchscreen operator panel* Drying and conveying process management* Alarm and monitoring functionsFunction:Central control of all drying, conveying and material distribution processes.3. Drying Hoppers* 15 pcs stainless steel drying hoppers* Hopper volume: 60 liters each* Central dry air connection* Automatic material loading* Suitable for technical plastics drying4. Central Vacuum Conveying System* Elmo Rietschle central vacuum pump* Automatic granule conveying system* Central material distribution* Multi-machine supply capability5. Stainless Steel Piping & Filter System* Central conveying pipework* Filter units* Material loaders* Automatic distribution stationWorking PrinciplePlastic granules are automatically conveyed through the central vacuum system into the drying hoppers.The MOTAN ADC 200/10 dry air generator produces low-humidity hot air which continuously circulates through the material inside the hoppers.During this process, moisture is removed from the plastic granules to prepare the material for injection molding production.After drying, the material is automatically transported through the central conveying lines and distributed to the connected injection molding machines.All drying and conveying processes are centrally controlled via the MOTAN LA net 200 control systemConditionThe system was in production operation until dismantling.Further technical information, photos and videos available on request.
Ref. no.: 18439
Manufacturer: MOTAN
Year of construction: 1995
Further information:
MOTAN Central Drying & Vacuum Conveying System
Complete MOTAN central drying and automatic material conveying system for plastic injection molding applications.
The system includes:
* 15 pcs stainless steel drying hoppers
* Hopper capacity: 60 liters each
The system was used in technical plastics production and is suitable for processing hygroscopic materials such as:
PA, PC, PET, PBT, ABS, TPU and other engineering plastics.
System Components
1. MOTAN ADC 200/10 Dry Air Generator
* Year of manufacture: 1995
* Dry air capacity: approx. 200 m³/h
* Heating power: approx. 19.5 kW
* Central dry air generation system
* Desiccant drying technology
Function:
Provides low-humidity hot air for the drying hoppers.
2. MOTAN LA net 200 Central Control System
* Year of manufacture: 2006
* Central process and automation control unit
* Touchscreen operator panel
* Drying and conveying process management
* Alarm and monitoring functions
Function:
Central control of all drying, conveying and material distribution processes.
3. Drying Hoppers
* 15 pcs stainless steel drying hoppers
* Hopper volume: 60 liters each
* Central dry air connection
* Automatic material loading
* Suitable for technical plastics drying
4. Central Vacuum Conveying System
* Elmo Rietschle central vacuum pump
* Automatic granule conveying system
* Central material distribution
* Multi-machine supply capability
5. Stainless Steel Piping & Filter System
* Central conveying pipework
* Filter units
* Material loaders
* Automatic distribution station
Working Principle
Plastic granules are automatically conveyed through the central vacuum system into the drying hoppers.
The MOTAN ADC 200/10 dry air generator produces low-humidity hot air which continuously circulates through the material inside the hoppers.
During this process, moisture is removed from the plastic granules to prepare the material for injection molding production.
After drying, the material is automatically transported through the central conveying lines and distributed to the connected injection molding machines.
All drying and conveying processes are centrally controlled via the MOTAN LA net 200 control system
Condition
The system was in production operation until dismantling.
Further technical information, photos and videos available on request.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: MOTAN
Year of construction: 1995
Further information:
MOTAN Central Drying & Vacuum Conveying System
Complete MOTAN central drying and automatic material conveying system for plastic injection molding applications.
The system includes:
* 15 pcs stainless steel drying hoppers
* Hopper capacity: 60 liters each
The system was used in technical plastics production and is suitable for processing hygroscopic materials such as:
PA, PC, PET, PBT, ABS, TPU and other engineering plastics.
System Components
1. MOTAN ADC 200/10 Dry Air Generator
* Year of manufacture: 1995
* Dry air capacity: approx. 200 m³/h
* Heating power: approx. 19.5 kW
* Central dry air generation system
* Desiccant drying technology
Function:
Provides low-humidity hot air for the drying hoppers.
2. MOTAN LA net 200 Central Control System
* Year of manufacture: 2006
* Central process and automation control unit
* Touchscreen operator panel
* Drying and conveying process management
* Alarm and monitoring functions
Function:
Central control of all drying, conveying and material distribution processes.
3. Drying Hoppers
* 15 pcs stainless steel drying hoppers
* Hopper volume: 60 liters each
* Central dry air connection
* Automatic material loading
* Suitable for technical plastics drying
4. Central Vacuum Conveying System
* Elmo Rietschle central vacuum pump
* Automatic granule conveying system
* Central material distribution
* Multi-machine supply capability
5. Stainless Steel Piping & Filter System
* Central conveying pipework
* Filter units
* Material loaders
* Automatic distribution station
Working Principle
Plastic granules are automatically conveyed through the central vacuum system into the drying hoppers.
The MOTAN ADC 200/10 dry air generator produces low-humidity hot air which continuously circulates through the material inside the hoppers.
During this process, moisture is removed from the plastic granules to prepare the material for injection molding production.
After drying, the material is automatically transported through the central conveying lines and distributed to the connected injection molding machines.
All drying and conveying processes are centrally controlled via the MOTAN LA net 200 control system
Condition
The system was in production operation until dismantling.
Further technical information, photos and videos available on request.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
13
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18622Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 35 mmInjection volume: 115 cm³Shot weight: 103 gInjection pressure: 1600 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgAdditional information & extrasCore pull: 1 pcsFurther information:The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.Key advantages of the IntElect series:* All-electric direct-drive servo technology* Extremely low energy consumption* High precision and process repeatability* Quiet and low-vibration operation* High dynamic servo performance* Low maintenance requirements* Clean production environment* Ideal solution for technical and precision plastic parts* Suitable for high-speed serial productionThe Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ref. no.: 18622
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 115 cm³
Shot weight: 103 g
Injection pressure: 1600 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Additional information & extras
Core pull: 1 pcs
Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.
All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.
The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.
The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.
Key advantages of the IntElect series:
* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production
The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.
The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 115 cm³
Shot weight: 103 g
Injection pressure: 1600 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Additional information & extras
Core pull: 1 pcs
Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.
All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.
The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.
The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.
Key advantages of the IntElect series:
* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production
The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.
The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
12
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18621Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 35 mmInjection volume: 115 cm³Shot weight: 103 gInjection pressure: 1600 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgFurther information:The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.Key advantages of the IntElect series:* All-electric direct-drive servo technology* Extremely low energy consumption* High precision and process repeatability* Quiet and low-vibration operation* High dynamic servo performance* Low maintenance requirements* Clean production environment* Ideal solution for technical and precision plastic parts* Suitable for high-speed serial productionThe Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ref. no.: 18621
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 115 cm³
Shot weight: 103 g
Injection pressure: 1600 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.
All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.
The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.
The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.
Key advantages of the IntElect series:
* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production
The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.
The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 35 mm
Injection volume: 115 cm³
Shot weight: 103 g
Injection pressure: 1600 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.
All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.
The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.
The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.
Key advantages of the IntElect series:
* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production
The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.
The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18620Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 30 mmInjection volume: 85 cm³Shot weight: 76 gInjection pressure: 2180 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgFurther information:The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.Key advantages of the IntElect series:* All-electric direct-drive servo technology* Extremely low energy consumption* High precision and process repeatability* Quiet and low-vibration operation* High dynamic servo performance* Low maintenance requirements* Clean production environment* Ideal solution for technical and precision plastic parts* Suitable for high-speed serial productionThe Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ref. no.: 18620
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 76 g
Injection pressure: 2180 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.
All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.
The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.
The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.
Key advantages of the IntElect series:
* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production
The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.
The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 76 g
Injection pressure: 2180 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Further information:
The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.
All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion control, excellent repeatability, and maximum process stability.
The IntElect series is especially recognized for its low energy consumption and outstanding production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% up to 80% can be achieved depending on the application. In addition, the reduced heat generation lowers cooling requirements and overall operating costs.
The machine is equipped with a direct servo injection and dosing system, allowing very fast response times and highly accurate injection control. The injection unit features 4 heating zones, providing homogeneous plasticizing performance and stable processing conditions, especially for technical engineering materials.
Key advantages of the IntElect series:
* All-electric direct-drive servo technology
* Extremely low energy consumption
* High precision and process repeatability
* Quiet and low-vibration operation
* High dynamic servo performance
* Low maintenance requirements
* Clean production environment
* Ideal solution for technical and precision plastic parts
* Suitable for high-speed serial production
The Sumitomo Demag IntElect series is still considered one of the most reliable and efficient all-electric injection moulding machine platforms on the market thanks to its long service life, stable production performance, and excellent energy efficiency.
The machine was in active production until dismantling and is in working condition. As visible in the pictures, the machine is clean and well maintained.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
9
Maszyny do przetwórstwa tworzyw sztucznychWtryskarkiWtryskarki do tworzyw sztucznych
Ref. no.: 18619Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 30 mmInjection volume: 85 cm³Shot weight: 76 gInjection pressure: 2180 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgFurther information:Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden.Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität.Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten.Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen.Die wichtigsten Vorteile der IntElect Serie:* Vollelektrische Direct-Drive Servo-Technologie* Sehr geringer Energieverbrauch* Hohe Präzision und Prozesswiederholgenauigkeit* Geräuscharmer und vibrationsarmer Betrieb* Hohe dynamische Servo-Performance* Geringer Wartungsaufwand* Saubere Produktionsumgebung* Ideale Lösung für technische und Präzisionsteile* Geeignet für schnelle SerienproduktionenDie Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.
Ref. no.: 18619
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 76 g
Injection pressure: 2180 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Further information:
Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden.
Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität.
Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten.
Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen.
Die wichtigsten Vorteile der IntElect Serie:
* Vollelektrische Direct-Drive Servo-Technologie
* Sehr geringer Energieverbrauch
* Hohe Präzision und Prozesswiederholgenauigkeit
* Geräuscharmer und vibrationsarmer Betrieb
* Hohe dynamische Servo-Performance
* Geringer Wartungsaufwand
* Saubere Produktionsumgebung
* Ideale Lösung für technische und Präzisionsteile
* Geeignet für schnelle Serienproduktionen
Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: DEMAG
Year of construction: 2008
Clamping unit
Clamping force: 100 ton
Opening stroke: 380 mm
Distance between tie bars: 470 x 420 mm
Mould height min.: 200 mm
Mould height max.: 430 mm
Platen size (h x v): 690 x 620 mm
Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 76 g
Injection pressure: 2180 bar
Measurements and weight
Dimensions: 4,8 x 1,4 x 2,2 m
Machine weight: 5500 kg
Further information:
Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden.
Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und ermöglichen dadurch höchste Präzision, ausgezeichnete Wiederholgenauigkeit und maximale Prozessstabilität.
Die IntElect Serie ist besonders bekannt für ihren niedrigen Energieverbrauch und ihre hohe Produktionspräzision. Im Vergleich zu konventionellen hydraulischen Spritzgießmaschinen können – abhängig von der Anwendung – Energieeinsparungen von ca. 60 % bis zu 80 % erzielt werden. Gleichzeitig reduziert die geringe Wärmeentwicklung den Kühlbedarf und senkt die gesamten Betriebskosten.
Die Maschine verfügt über ein direktes Servo-Einspritz- und Dosiersystem, das sehr schnelle Reaktionszeiten und eine hochpräzise Einspritzsteuerung ermöglicht. Die Spritzeinheit ist mit 4 Heizzonen ausgestattet und sorgt dadurch für eine homogene Plastifizierung sowie stabile Prozessbedingungen, insbesondere bei technischen Kunststoffen.
Die wichtigsten Vorteile der IntElect Serie:
* Vollelektrische Direct-Drive Servo-Technologie
* Sehr geringer Energieverbrauch
* Hohe Präzision und Prozesswiederholgenauigkeit
* Geräuscharmer und vibrationsarmer Betrieb
* Hohe dynamische Servo-Performance
* Geringer Wartungsaufwand
* Saubere Produktionsumgebung
* Ideale Lösung für technische und Präzisionsteile
* Geeignet für schnelle Serienproduktionen
Die Sumitomo Demag IntElect Serie zählt aufgrund ihrer langen Lebensdauer, stabilen Produktionsleistung und hohen Energieeffizienz auch heute noch zu den gefragtesten vollelektrischen Spritzgießmaschinen am Markt.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
7
Maszyny spożywczeProdukcja wyrobów cukierniczych
Sollich RTN1000 Chocolate tank, 2006, chocolate tank, 100Kgs capacity with adjustable temperature control, top mounted motor with agitation and scrape surface, 3Ph
Sollich RTN1000 Chocolate tank, 2006, chocolate tank, 100Kgs capacity with adjustable temperature control, top mounted motor with agitation and scrape surface, 3Ph
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
2
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 3100 mmMax. bending capacity - mild steel: 8Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mmUpper roll diameter: 240 mmLower roll diameter: 240 mmLateral roll diameter: 190 mmWorking height: 825 mmMotor power: 11 kWLength: 4880 mmWidth: 1160 mmHeight: 1200 mmWeight: 6450 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 240 mm
Lower roll diameter: 240 mm
Lateral roll diameter: 190 mm
Working height: 825 mm
Motor power: 11 kW
Length: 4880 mm
Width: 1160 mm
Height: 1200 mm
Weight: 6450 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 8
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 6 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 5 mm
Upper roll diameter: 240 mm
Lower roll diameter: 240 mm
Lateral roll diameter: 190 mm
Working height: 825 mm
Motor power: 11 kW
Length: 4880 mm
Width: 1160 mm
Height: 1200 mm
Weight: 6450 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
3
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 2030 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending - mild steel: 6 mmMax. plate thickness with prebending - mild steel: 5 mmUpper roll diameter: 170 mmMotor power: 4 kWLength: 3600 mmWidth: 1020 mmHeight: 1120 mmWeight: 2400 kg
Bending length: 2030 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 5 mm
Upper roll diameter: 170 mm
Motor power: 4 kW
Length: 3600 mm
Width: 1020 mm
Height: 1120 mm
Weight: 2400 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 5 mm
Upper roll diameter: 170 mm
Motor power: 4 kW
Length: 3600 mm
Width: 1020 mm
Height: 1120 mm
Weight: 2400 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
1
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 3030 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending - mild steel: 6 mmMax. plate thickness with prebending - mild steel: 4 mmUpper roll diameter: 220 mmMotor power: 5.5 kWLength: 4750 mmWidth: 1200 mmHeight: 1150 mmWeight: 4920 kg
Bending length: 3030 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 4 mm
Upper roll diameter: 220 mm
Motor power: 5.5 kW
Length: 4750 mm
Width: 1200 mm
Height: 1150 mm
Weight: 4920 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 4 mm
Upper roll diameter: 220 mm
Motor power: 5.5 kW
Length: 4750 mm
Width: 1200 mm
Height: 1150 mm
Weight: 4920 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
1
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 2530 mmMax. bending capacity - mild steel: 6Max. plate thickness without prebending - mild steel: 6 mmMax. plate thickness with prebending - mild steel: 4 mmUpper roll diameter: 190 mmMotor power: 5.5 kWLength: 4250 mmWidth: 1200 mmHeight: 1150 mmWeight: 3750 kg
Bending length: 2530 mm
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 4 mm
Upper roll diameter: 190 mm
Motor power: 5.5 kW
Length: 4250 mm
Width: 1200 mm
Height: 1150 mm
Weight: 3750 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 6
Max. plate thickness without prebending - mild steel: 6 mm
Max. plate thickness with prebending - mild steel: 4 mm
Upper roll diameter: 190 mm
Motor power: 5.5 kW
Length: 4250 mm
Width: 1200 mm
Height: 1150 mm
Weight: 3750 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
5
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 2050 mmMax. bending capacity - mild steel: 30Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mmUpper roll diameter: 350 mmLower roll diameter: 350 mmLateral roll diameter: 260 mmBending speed: 1,5-5 m/minMotor power: 22 kWLength: 5000 mmWidth: 2000 mmHeight: 1900 mmWeight: 11000 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 30
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 30 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5000 mm
Width: 2000 mm
Height: 1900 mm
Weight: 11000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
5
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 2550 mmMax. bending capacity - mild steel: 25Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mmUpper roll diameter: 350 mmLower roll diameter: 350 mmLateral roll diameter: 260 mmBending speed: 1,5-5 m/minMotor power: 22 kWLength: 5500 mmWidth: 2000 mmHeight: 1900 mmWeight: 13000 kg
Bending length: 2550 mm
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 25
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 25 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 5500 mm
Width: 2000 mm
Height: 1900 mm
Weight: 13000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
5
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 3100 mmMax. bending capacity - mild steel: 20Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mmUpper roll diameter: 350 mmLower roll diameter: 350 mmLateral roll diameter: 260 mmBending speed: 1,5-5 m/minMotor power: 22 kWLength: 6000 mmWidth: 2200 mmHeight: 1900 mmWeight: 15000 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 6000 mm
Width: 2200 mm
Height: 1900 mm
Weight: 15000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 20
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 20 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 12 mm
Upper roll diameter: 350 mm
Lower roll diameter: 350 mm
Lateral roll diameter: 260 mm
Bending speed: 1,5-5 m/min
Motor power: 22 kW
Length: 6000 mm
Width: 2200 mm
Height: 1900 mm
Weight: 15000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
5
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 2050 mmMax. bending capacity - mild steel: 16Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mmUpper roll diameter: 260 mmLower roll diameter: 260 mmLateral roll diameter: 200 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 4300 mmWidth: 1600 mmHeight: 1550 mmWeight: 6100 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 16
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 16 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 13 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 10 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 4300 mm
Width: 1600 mm
Height: 1550 mm
Weight: 6100 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
5
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 3100 mmMax. bending capacity - mild steel: 10Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mmMax. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mmMax. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mmUpper roll diameter: 260 mmLower roll diameter: 260 mmLateral roll diameter: 200 mmBending speed: 1,5-6 m/minMotor power: 7.5 kWLength: 5350 mmWidth: 1600 mmHeight: 1550 mmWeight: 7685 kg
Bending length: 3100 mm
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 10
Max. plate thickness without prebending at D=5x upper roll diam. - mild steel: 10 mm
Max. plate thickness without prebending at D=1,5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=5x upper roll diam. - mild steel: 8 mm
Max. plate thickness with prebending at D=1,5x upper roll diam. - mild steel: 6 mm
Upper roll diameter: 260 mm
Lower roll diameter: 260 mm
Lateral roll diameter: 200 mm
Bending speed: 1,5-6 m/min
Motor power: 7.5 kW
Length: 5350 mm
Width: 1600 mm
Height: 1550 mm
Weight: 7685 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
3
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 1050 mmMax. bending capacity - mild steel: 3Upper roll diameter: 90 mmBending speed: 6 m/minMotor power: 1.1 kWLength: 1630 mmWidth: 700 mmHeight: 1200 mmWeight: 480 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
3
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 1050 mmMax. bending capacity - mild steel: 3Upper roll diameter: 90 mmBending speed: 6 m/minMotor power: 1.1 kWLength: 1630 mmWidth: 700 mmHeight: 1200 mmWeight: 480 kg
Bending length: 1050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 3
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1630 mm
Width: 700 mm
Height: 1200 mm
Weight: 480 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
1
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 1270 mmMax. bending capacity - mild steel: 2.5Upper roll diameter: 90 mmBending speed: 6 m/minMotor power: 1.1 kWLength: 1850 mmWidth: 700 mmHeight: 1200 mmWeight: 520 kg
Bending length: 1270 mm
Max. bending capacity - mild steel: 2.5
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1850 mm
Width: 700 mm
Height: 1200 mm
Weight: 520 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 2.5
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.1 kW
Length: 1850 mm
Width: 700 mm
Height: 1200 mm
Weight: 520 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
6
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 1550 mmMax. bending capacity - mild steel: 2Upper roll diameter: 90 mmBending speed: 6 m/minMotor power: 1.5 kWLength: 2130 mmWidth: 700 mmHeight: 1200 mmWeight: 545 kg
Bending length: 1550 mm
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 2
Upper roll diameter: 90 mm
Bending speed: 6 m/min
Motor power: 1.5 kW
Length: 2130 mm
Width: 700 mm
Height: 1200 mm
Weight: 545 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
5
Obróbka metali i obrabiarkiMaszyny do obróbki blachZwijarki okrągłe
Bending length: 2050 mmMax. bending capacity - mild steel: 3Upper roll diameter: 130 mmBending speed: 3 m/minMotor power: 2.2 kWLength: 3200 mmWidth: 750 mmHeight: 1000 mmWeight: 1500 kg
Bending length: 2050 mm
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Max. bending capacity - mild steel: 3
Upper roll diameter: 130 mm
Bending speed: 3 m/min
Motor power: 2.2 kW
Length: 3200 mm
Width: 750 mm
Height: 1000 mm
Weight: 1500 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
4
Obróbka metali i obrabiarkiMaszyny do obróbki blachPrasy krawędziowe
pressing capacity: 40 toBending length: 2000 mmAxes: X and Y axisStroke: 100 mmDaylight: 310 mmPower concept: hydraulicOiltank: 38 lMotor: 6 kWBack gauge: 420 mmDie: 1Geschwindigkeit: 10 mm/sRetraction speed: 12 mm/sBack gauge speed: 40 mm/sAccuracy press beam: 0.02 +/- mmBack gauge accuracy: 0.05 +/- mmLength: 2500 mmWidth: 1200 mmHeight: 1900 mmWeight: 2100 kg
pressing capacity: 40 to
Bending length: 2000 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 2500 mm
Width: 1200 mm
Height: 1900 mm
Weight: 2100 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Bending length: 2000 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 2500 mm
Width: 1200 mm
Height: 1900 mm
Weight: 2100 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
5
Obróbka metali i obrabiarkiMaszyny do obróbki blachPrasy krawędziowe
pressing capacity: 40 toBending length: 1500 mmAxes: X and Y axisStroke: 100 mmDaylight: 310 mmPower concept: hydraulicOiltank: 38 lMotor: 6 kWBack gauge: 420 mmDie: 1Geschwindigkeit: 10 mm/sRetraction speed: 12 mm/sBack gauge speed: 40 mm/sAccuracy press beam: 0.02 +/- mmBack gauge accuracy: 0.05 +/- mmLength: 2000 mmWidth: 950 mmHeight: 1900 mmWeight: 1800 kg
pressing capacity: 40 to
Bending length: 1500 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 2000 mm
Width: 950 mm
Height: 1900 mm
Weight: 1800 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Bending length: 1500 mm
Axes: X and Y axis
Stroke: 100 mm
Daylight: 310 mm
Power concept: hydraulic
Oiltank: 38 l
Motor: 6 kW
Back gauge: 420 mm
Die: 1
Geschwindigkeit: 10 mm/s
Retraction speed: 12 mm/s
Back gauge speed: 40 mm/s
Accuracy press beam: 0.02 +/- mm
Back gauge accuracy: 0.05 +/- mm
Length: 2000 mm
Width: 950 mm
Height: 1900 mm
Weight: 1800 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
4
Obróbka metali i obrabiarkiMaszyny do obróbki blachPrasy krawędziowe
pressing capacity: 220 toBending length: 4050 mmAxes: Y1 / Y2 / X and R axisStroke: 265 mmInside distance between side frames: 3600 mmGap in side frame: 410 mmDaylight: 530 mmPower concept: hydraulicrapid speed Y-axis: 200 mm/sWorking speed Y-axis: 12Retractionspeed Y-axis: 180Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmLength: 5250 mmWidth: 1770 mmHeight: 2900 mmWeight: 15000 kg
pressing capacity: 220 to
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Bending length: 4050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 3600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Length: 5250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 15000 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
4
Obróbka metali i obrabiarkiMaszyny do obróbki blachPrasy krawędziowe
pressing capacity: 220 toBending length: 3050 mmAxes: Y1 / Y2 / X and R axisStroke: 265 mmInside distance between side frames: 2600 mmGap in side frame: 410 mmDaylight: 530 mmPower concept: hydraulicrapid speed Y-axis: 200 mm/sWorking speed Y-axis: 12Retractionspeed Y-axis: 180Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmMotor: 11 kWLength: 4250 mmWidth: 1770 mmHeight: 2900 mmWeight: 12250 kg
pressing capacity: 220 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12250 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 12
Retractionspeed Y-axis: 180
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 11 kW
Length: 4250 mm
Width: 1770 mm
Height: 2900 mm
Weight: 12250 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
Obróbka metali i obrabiarkiMaszyny do obróbki blachPrasy krawędziowe
pressing capacity: 175 toBending length: 3050 mmAxes: Y1 / Y2 / X / R axisStroke: 265 mmInside distance between side frames: 2600 mmGap in side frame: 410 mmDaylight: 530 mmPower concept: hydraulicrapid speed Y-axis: 200 mm/sWorking speed Y-axis: 10Retractionspeed Y-axis: 200Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmMotor: 2 x 4 kWLength: 4250 mmWidth: 1700 mmHeight: 2750 mmWeight: 10900 kg
pressing capacity: 175 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X / R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 4 kW
Length: 4250 mm
Width: 1700 mm
Height: 2750 mm
Weight: 10900 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Bending length: 3050 mm
Axes: Y1 / Y2 / X / R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor: 2 x 4 kW
Length: 4250 mm
Width: 1700 mm
Height: 2750 mm
Weight: 10900 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
4
Obróbka metali i obrabiarkiMaszyny do obróbki blachPrasy krawędziowe
pressing capacity: 135 toBending length: 3050 mmAxes: Y1 / Y2 / X and R axisStroke: 265 mmInside distance between side frames: 2600 mmGap in side frame: 410 mmDaylight: 530 mmPower concept: hydraulicrapid speed Y-axis: 200 mm/sWorking speed Y-axis: 10Retractionspeed Y-axis: 200Back gauge travel X-axis: 650 mmBack gauge speed X-axis: 500Back gauge travel R-axis: 250 mmTable height: 900 mmTable width: 104 mmMotor power: 2x4 kWLength: 4200 mmWidth: 1680 mmHeight: 2750 mmWeight: 9500 kg
pressing capacity: 135 to
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2x4 kW
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Bending length: 3050 mm
Axes: Y1 / Y2 / X and R axis
Stroke: 265 mm
Inside distance between side frames: 2600 mm
Gap in side frame: 410 mm
Daylight: 530 mm
Power concept: hydraulic
rapid speed Y-axis: 200 mm/s
Working speed Y-axis: 10
Retractionspeed Y-axis: 200
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 2x4 kW
Length: 4200 mm
Width: 1680 mm
Height: 2750 mm
Weight: 9500 kg
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
Obróbka metali i obrabiarkiTokarkiTokarki CNC
Drehdurchmesser: 480 mmDrehlänge: 800 mmSteuerung: System TX8FDrehdurchmesser über Support: 240 mmSpindeldurchlass: 65 mmSpannfutter-Durchmesser: 200 mmDrehzahl: 4000 U/minAntriebsleistung: 30 kWGesamtleistungsbedarf: kWMaschinengewicht ca.: 4,3 tRaumbedarf ca.: m
Drehdurchmesser: 480 mm
Drehlänge: 800 mm
Steuerung: System TX8F
Drehdurchmesser über Support: 240 mm
Spindeldurchlass: 65 mm
Spannfutter-Durchmesser: 200 mm
Drehzahl: 4000 U/min
Antriebsleistung: 30 kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 4,3 t
Raumbedarf ca.: m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Drehlänge: 800 mm
Steuerung: System TX8F
Drehdurchmesser über Support: 240 mm
Spindeldurchlass: 65 mm
Spannfutter-Durchmesser: 200 mm
Drehzahl: 4000 U/min
Antriebsleistung: 30 kW
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 4,3 t
Raumbedarf ca.: m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
4
Obróbka metali i obrabiarkiAkcesoria i części zamienneTabliczki do znakowania
Tischlänge: 3200 mmTischbreite: 2000 mmTischhöhe: 160 mmGesamtleistungsbedarf: . kWMaschinengewicht ca.: . tRaumbedarf ca.: . m
Tischlänge: 3200 mm
Tischbreite: 2000 mm
Tischhöhe: 160 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Tischbreite: 2000 mm
Tischhöhe: 160 mm
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
_thumb.png "Pokaż ogłoszenie")
_thumb.png "Pokaż ogłoszenie")
13
Technologia przenośnikaPompy
Ref. no.: 18637Manufacturer: BUSCHYear of construction: 2010Further information: Make | Model | Year | Capacity | Frequency |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |BUSCH MINK MM 1252 AV VACUUM PUMPSA total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale.The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications.TECHNICAL SPECIFICATIONS• Manufacturer: Busch• Model: MINK MM 1252 AV• Technology: Dry Claw / Oil-Free Vacuum Technology• Capacity: 250 – 300 m³/h• Final Vacuum: 100 hPa (0.1 bar)• Frequency: 50/60 Hz• Year of Manufacture: 2009 / 2010• Origin: GermanyMAIN ADVANTAGES• Oil-free operating system• Low maintenance costs• Energy-efficient operation• Quiet and reliable performance• Suitable for continuous industrial operation• High Busch quality with worldwide service supportAPPLICATION AREAS• Plastic injection molding machines• Central vacuum systems• Packaging machines• Thermoforming systems• Automation and conveying systems• Industrial production facilities
Ref. no.: 18637
Manufacturer: BUSCH
Year of construction: 2010
Further information:
Make | Model | Year | Capacity | Frequency |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
BUSCH MINK MM 1252 AV VACUUM PUMPS
A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale.
The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications.
TECHNICAL SPECIFICATIONS
• Manufacturer: Busch
• Model: MINK MM 1252 AV
• Technology: Dry Claw / Oil-Free Vacuum Technology
• Capacity: 250 – 300 m³/h
• Final Vacuum: 100 hPa (0.1 bar)
• Frequency: 50/60 Hz
• Year of Manufacture: 2009 / 2010
• Origin: Germany
MAIN ADVANTAGES
• Oil-free operating system
• Low maintenance costs
• Energy-efficient operation
• Quiet and reliable performance
• Suitable for continuous industrial operation
• High Busch quality with worldwide service support
APPLICATION AREAS
• Plastic injection molding machines
• Central vacuum systems
• Packaging machines
• Thermoforming systems
• Automation and conveying systems
• Industrial production facilities
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: BUSCH
Year of construction: 2010
Further information:
Make | Model | Year | Capacity | Frequency |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz |
Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz |
BUSCH MINK MM 1252 AV VACUUM PUMPS
A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale.
The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications.
TECHNICAL SPECIFICATIONS
• Manufacturer: Busch
• Model: MINK MM 1252 AV
• Technology: Dry Claw / Oil-Free Vacuum Technology
• Capacity: 250 – 300 m³/h
• Final Vacuum: 100 hPa (0.1 bar)
• Frequency: 50/60 Hz
• Year of Manufacture: 2009 / 2010
• Origin: Germany
MAIN ADVANTAGES
• Oil-free operating system
• Low maintenance costs
• Energy-efficient operation
• Quiet and reliable performance
• Suitable for continuous industrial operation
• High Busch quality with worldwide service support
APPLICATION AREAS
• Plastic injection molding machines
• Central vacuum systems
• Packaging machines
• Thermoforming systems
• Automation and conveying systems
• Industrial production facilities
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
12
Technologia przenośnikaPompy
Ref. no.: 18636Manufacturer: EICHHOLZYear of construction: 2014Further information:WHAT IS AN OCTABIN TIPPER?An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers.Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems.These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling.FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEMFor sale: 1 heavy-duty industrial octabin tipper / material discharge system.The system was removed from a running plastic production line and is in clean and good cosmetic condition.The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems.The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse.BRANDED COMPONENTS INCLUDED IN THE SYSTEMAerzen Vacuum / Blower Unit (Germany)Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies.Technical Details• Brand: Aerzen• Model: GM15L• Year: 2014• Capacity: 12.50 m³/min• Motor Power: 11 kW• Max. Pressure: 1.25 bar• Operating Pressure: 1.0 bar• Weight: approx. 626 kgAdvantages• High-efficiency German technology• Suitable for continuous industrial operation• Reliable and low-maintenance• Ideal for centralized vacuum systemsRittal Industrial Control SystemThe system is equipped with a Rittal industrial control cabinet.Rittal is a globally recognized premium brand in industrial automation and control systems.Features• Industrial control cabinet• Operator control system• Integrated safety circuits• CE-compliant constructionOmron Safety SensorsThe machine is equipped with Omron safety sensors.Features• Industrial safety barriers• Operator protection system• Safe working area monitoring• Compatible with automation systemsDMN Westinghouse Rotary Valve SystemA DMN Westinghouse rotary valve is installed at the lower hopper outlet.DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems.Technical Details• Brand: DMN Westinghouse• Model: ALD 200-6• Low-dust controlled material transfer• Suitable for granule and bulk material applicationsAdvantages• Controlled material flow• Reliable continuous operation• Suitable for centralized conveying systemsOCTABIN TIPPER FEATURES• Heavy-duty steel construction• Chain-driven lifting system• Safety cage• Automatic tipping mechanism• Suitable for large-volume octabins• Designed for continuous industrial operation• Integration into centralized conveying systems• Suitable for plastic granule and regrind applicationsAPPLICATION AREAS• Plastic injection molding plants• Extrusion lines• Centralized material conveying systems• Plastic recycling facilities• Automation and conveying systems• Granule / regrind transfer applications
Ref. no.: 18636
Manufacturer: EICHHOLZ
Year of construction: 2014
Further information:
WHAT IS AN OCTABIN TIPPER?
An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers.
Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems.
These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling.
FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM
For sale: 1 heavy-duty industrial octabin tipper / material discharge system.
The system was removed from a running plastic production line and is in clean and good cosmetic condition.
The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems.
The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse.
BRANDED COMPONENTS INCLUDED IN THE SYSTEM
Aerzen Vacuum / Blower Unit (Germany)
Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies.
Technical Details
• Brand: Aerzen
• Model: GM15L
• Year: 2014
• Capacity: 12.50 m³/min
• Motor Power: 11 kW
• Max. Pressure: 1.25 bar
• Operating Pressure: 1.0 bar
• Weight: approx. 626 kg
Advantages
• High-efficiency German technology
• Suitable for continuous industrial operation
• Reliable and low-maintenance
• Ideal for centralized vacuum systems
Rittal Industrial Control System
The system is equipped with a Rittal industrial control cabinet.
Rittal is a globally recognized premium brand in industrial automation and control systems.
Features
• Industrial control cabinet
• Operator control system
• Integrated safety circuits
• CE-compliant construction
Omron Safety Sensors
The machine is equipped with Omron safety sensors.
Features
• Industrial safety barriers
• Operator protection system
• Safe working area monitoring
• Compatible with automation systems
DMN Westinghouse Rotary Valve System
A DMN Westinghouse rotary valve is installed at the lower hopper outlet.
DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems.
Technical Details
• Brand: DMN Westinghouse
• Model: ALD 200-6
• Low-dust controlled material transfer
• Suitable for granule and bulk material applications
Advantages
• Controlled material flow
• Reliable continuous operation
• Suitable for centralized conveying systems
OCTABIN TIPPER FEATURES
• Heavy-duty steel construction
• Chain-driven lifting system
• Safety cage
• Automatic tipping mechanism
• Suitable for large-volume octabins
• Designed for continuous industrial operation
• Integration into centralized conveying systems
• Suitable for plastic granule and regrind applications
APPLICATION AREAS
• Plastic injection molding plants
• Extrusion lines
• Centralized material conveying systems
• Plastic recycling facilities
• Automation and conveying systems
• Granule / regrind transfer applications
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Manufacturer: EICHHOLZ
Year of construction: 2014
Further information:
WHAT IS AN OCTABIN TIPPER?
An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers.
Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems.
These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling.
FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM
For sale: 1 heavy-duty industrial octabin tipper / material discharge system.
The system was removed from a running plastic production line and is in clean and good cosmetic condition.
The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems.
The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse.
BRANDED COMPONENTS INCLUDED IN THE SYSTEM
Aerzen Vacuum / Blower Unit (Germany)
Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies.
Technical Details
• Brand: Aerzen
• Model: GM15L
• Year: 2014
• Capacity: 12.50 m³/min
• Motor Power: 11 kW
• Max. Pressure: 1.25 bar
• Operating Pressure: 1.0 bar
• Weight: approx. 626 kg
Advantages
• High-efficiency German technology
• Suitable for continuous industrial operation
• Reliable and low-maintenance
• Ideal for centralized vacuum systems
Rittal Industrial Control System
The system is equipped with a Rittal industrial control cabinet.
Rittal is a globally recognized premium brand in industrial automation and control systems.
Features
• Industrial control cabinet
• Operator control system
• Integrated safety circuits
• CE-compliant construction
Omron Safety Sensors
The machine is equipped with Omron safety sensors.
Features
• Industrial safety barriers
• Operator protection system
• Safe working area monitoring
• Compatible with automation systems
DMN Westinghouse Rotary Valve System
A DMN Westinghouse rotary valve is installed at the lower hopper outlet.
DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems.
Technical Details
• Brand: DMN Westinghouse
• Model: ALD 200-6
• Low-dust controlled material transfer
• Suitable for granule and bulk material applications
Advantages
• Controlled material flow
• Reliable continuous operation
• Suitable for centralized conveying systems
OCTABIN TIPPER FEATURES
• Heavy-duty steel construction
• Chain-driven lifting system
• Safety cage
• Automatic tipping mechanism
• Suitable for large-volume octabins
• Designed for continuous industrial operation
• Integration into centralized conveying systems
• Suitable for plastic granule and regrind applications
APPLICATION AREAS
• Plastic injection molding plants
• Extrusion lines
• Centralized material conveying systems
• Plastic recycling facilities
• Automation and conveying systems
• Granule / regrind transfer applications
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
Obróbka metali i obrabiarkiTokarkiTokarki
Planscheibendurchmesser: 850 mmUmlaufdurchmesser: 1200 mmDrehhöhe: 1000 mmSteuerung: SiemensTyp: 840 DWerkzeugwechsler: 36 Pos.x-Weg: 870 mmz-Weg: 1020 mmc-Achse: 0Maschinengewicht ca.: tRaumbedarf ca.: m
Planscheibendurchmesser: 850 mm
Umlaufdurchmesser: 1200 mm
Drehhöhe: 1000 mm
Steuerung: Siemens
Typ: 840 D
Werkzeugwechsler: 36 Pos.
x-Weg: 870 mm
z-Weg: 1020 mm
c-Achse: 0
Maschinengewicht ca.: t
Raumbedarf ca.: m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Umlaufdurchmesser: 1200 mm
Drehhöhe: 1000 mm
Steuerung: Siemens
Typ: 840 D
Werkzeugwechsler: 36 Pos.
x-Weg: 870 mm
z-Weg: 1020 mm
c-Achse: 0
Maschinengewicht ca.: t
Raumbedarf ca.: m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
4
Obróbka metali i obrabiarkiAkcesoria i części zamienneKąty mocowania
Höhe: 2800 mmBreite: 900 mmTiefe: 1200 mmGewinde: M 24Gesamtleistungsbedarf: kWMaschinengewicht ca.: tRaumbedarf ca.: m
Höhe: 2800 mm
Breite: 900 mm
Tiefe: 1200 mm
Gewinde: M 24
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Breite: 900 mm
Tiefe: 1200 mm
Gewinde: M 24
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: t
Raumbedarf ca.: m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
10
Obróbka metali i obrabiarkiFrezarkiFrezarki łożowe
x-Weg: 4000 mmy-Weg: 1400 mmz-Weg: 1500 mmSteuerung: HeidenhainTyp: TNC 426Antriebsleistung: 30 kWGetriebestufen: 2Drehzahl: 20-2800 U/minSpindelaufnahme ISO: 50Vorschub: 4000 mm/minEilgang: 10000 mm/minAufspannfläche: 4200x960 mmT-Nuten - Breite: 22 mmT-Nuten - Abstand: 140 mmTischbelastung: 8500 tGesamtleistungsbedarf: 57 KVAMaschinengewicht ca.: 24 tRaumbedarf ca.: 9,3x4x3,7 m
x-Weg: 4000 mm
y-Weg: 1400 mm
z-Weg: 1500 mm
Steuerung: Heidenhain
Typ: TNC 426
Antriebsleistung: 30 kW
Getriebestufen: 2
Drehzahl: 20-2800 U/min
Spindelaufnahme ISO: 50
Vorschub: 4000 mm/min
Eilgang: 10000 mm/min
Aufspannfläche: 4200x960 mm
T-Nuten - Breite: 22 mm
T-Nuten - Abstand: 140 mm
Tischbelastung: 8500 t
Gesamtleistungsbedarf: 57 KVA
Maschinengewicht ca.: 24 t
Raumbedarf ca.: 9,3x4x3,7 m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
y-Weg: 1400 mm
z-Weg: 1500 mm
Steuerung: Heidenhain
Typ: TNC 426
Antriebsleistung: 30 kW
Getriebestufen: 2
Drehzahl: 20-2800 U/min
Spindelaufnahme ISO: 50
Vorschub: 4000 mm/min
Eilgang: 10000 mm/min
Aufspannfläche: 4200x960 mm
T-Nuten - Breite: 22 mm
T-Nuten - Abstand: 140 mm
Tischbelastung: 8500 t
Gesamtleistungsbedarf: 57 KVA
Maschinengewicht ca.: 24 t
Raumbedarf ca.: 9,3x4x3,7 m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
11
Obróbka metali i obrabiarkiWiertarki i wytaczarkiWytaczarki płytowe
Spindeldurchmesser: 140 mmx-Weg: 6000 mmy-Weg: 2500 mmz-Weg: 800 mmw-Weg: 700 mmEilgang: 10 m/minSpindelaufnahme ISO: 50Steuerung: Heidenhain ITNC 430Plattenfeld: 3500x2500 mmBohrwerksdrehtisch:: RottlerTyp: DVT200/2500 30NC 2000Tischabmessung: 2500x2000 mmTischbelastung: 30 tTischweg: 700 mmDrehtisch: 360 °T-Nuten - Breite: 28/50 mmT-Nuten - Abstand: 170 mmAnzahl der T-Nuten: 11Planschieber: 680 mmPlanschiebeverfahrweg: 170 mmSpindeldrehzahl:: 1600 UPM
Spindeldurchmesser: 140 mm
x-Weg: 6000 mm
y-Weg: 2500 mm
z-Weg: 800 mm
w-Weg: 700 mm
Eilgang: 10 m/min
Spindelaufnahme ISO: 50
Steuerung: Heidenhain ITNC 430
Plattenfeld: 3500x2500 mm
Bohrwerksdrehtisch:: Rottler
Typ: DVT200/2500 30NC 2000
Tischabmessung: 2500x2000 mm
Tischbelastung: 30 t
Tischweg: 700 mm
Drehtisch: 360 °
T-Nuten - Breite: 28/50 mm
T-Nuten - Abstand: 170 mm
Anzahl der T-Nuten: 11
Planschieber: 680 mm
Planschiebeverfahrweg: 170 mm
Spindeldrehzahl:: 1600 UPM
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
x-Weg: 6000 mm
y-Weg: 2500 mm
z-Weg: 800 mm
w-Weg: 700 mm
Eilgang: 10 m/min
Spindelaufnahme ISO: 50
Steuerung: Heidenhain ITNC 430
Plattenfeld: 3500x2500 mm
Bohrwerksdrehtisch:: Rottler
Typ: DVT200/2500 30NC 2000
Tischabmessung: 2500x2000 mm
Tischbelastung: 30 t
Tischweg: 700 mm
Drehtisch: 360 °
T-Nuten - Breite: 28/50 mm
T-Nuten - Abstand: 170 mm
Anzahl der T-Nuten: 11
Planschieber: 680 mm
Planschiebeverfahrweg: 170 mm
Spindeldrehzahl:: 1600 UPM
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
6
Obróbka metali i obrabiarkiPrasyPrasy punktowe
Druck: 100 tTischlänge: 1800 mmTischbreite: 1550 mmTischweg: 2000 mmEinbauhöhe: 1800 mmGesamtleistungsbedarf: 19,5 KVAMaschinengewicht ca.: 22 t
Druck: 100 t
Tischlänge: 1800 mm
Tischbreite: 1550 mm
Tischweg: 2000 mm
Einbauhöhe: 1800 mm
Gesamtleistungsbedarf: 19,5 KVA
Maschinengewicht ca.: 22 t
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Tischlänge: 1800 mm
Tischbreite: 1550 mm
Tischweg: 2000 mm
Einbauhöhe: 1800 mm
Gesamtleistungsbedarf: 19,5 KVA
Maschinengewicht ca.: 22 t
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
8
Obróbka metali i obrabiarkiFrezarkiFrezarka typu strugarka M / C – podwójna kolumna
x-Weg: 3000 mmy-Weg: 2500 mmz-Weg: 1000 mmSteuerung: SiemensTyp: Sinumerik 840 DVorschub: 5-30.000 mm/minTischfläche: 2000x2170 mmTischbelastung: 10 tT-Nuten: 22 H9Ständerdurchgang: 2500 mmSpindeldrehzahlen: 6000 U/minSpindelmotor: 36 kWSpindelaufnahme: HSK 100Werkzeugwechsler: 30Drehtisch: 2000 mmDrehzahlen: 250 U/minDrehdurchmesser: 2500 mmDrehmoment: 33000 NmGesamtleistungsbedarf: kWMaschinengewicht ca.: 45 tRaumbedarf ca.: 8x6,4x4,4 m
x-Weg: 3000 mm
y-Weg: 2500 mm
z-Weg: 1000 mm
Steuerung: Siemens
Typ: Sinumerik 840 D
Vorschub: 5-30.000 mm/min
Tischfläche: 2000x2170 mm
Tischbelastung: 10 t
T-Nuten: 22 H9
Ständerdurchgang: 2500 mm
Spindeldrehzahlen: 6000 U/min
Spindelmotor: 36 kW
Spindelaufnahme: HSK 100
Werkzeugwechsler: 30
Drehtisch: 2000 mm
Drehzahlen: 250 U/min
Drehdurchmesser: 2500 mm
Drehmoment: 33000 Nm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 45 t
Raumbedarf ca.: 8x6,4x4,4 m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
y-Weg: 2500 mm
z-Weg: 1000 mm
Steuerung: Siemens
Typ: Sinumerik 840 D
Vorschub: 5-30.000 mm/min
Tischfläche: 2000x2170 mm
Tischbelastung: 10 t
T-Nuten: 22 H9
Ständerdurchgang: 2500 mm
Spindeldrehzahlen: 6000 U/min
Spindelmotor: 36 kW
Spindelaufnahme: HSK 100
Werkzeugwechsler: 30
Drehtisch: 2000 mm
Drehzahlen: 250 U/min
Drehdurchmesser: 2500 mm
Drehmoment: 33000 Nm
Gesamtleistungsbedarf: kW
Maschinengewicht ca.: 45 t
Raumbedarf ca.: 8x6,4x4,4 m
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
Obróbka metali i obrabiarkiFrezarkiFrezarki pionowe
x-Weg: 2400 mmy-Weg: 2000 mmz-Weg: 1450 mmTischfläche: 5000 x 1400 mmSpindelaufnahme: SK 50Steuerung: Fidia C1
x-Weg: 2400 mm
y-Weg: 2000 mm
z-Weg: 1450 mm
Tischfläche: 5000 x 1400 mm
Spindelaufnahme: SK 50
Steuerung: Fidia C1
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.
y-Weg: 2000 mm
z-Weg: 1450 mm
Tischfläche: 5000 x 1400 mm
Spindelaufnahme: SK 50
Steuerung: Fidia C1
Ogłoszenie zostało przetłumaczone automatycznie i mogły wystąpić pewne błędy w tłumaczeniu.