Heidelberg SBG 56×77 cm

With safety covers
Year 1964

Simplacutter VI

Max dimensions: 200x 120 cm

Polar Mohr 92 X Cutting Line

Complete cutting line consisting of lift, vibrating table with air removal, and cutting machine, in good condition and available in February 2024.

Brand and model: Polar Mohr 92 X
Year of manufacture: 2010
Cutting width: 92 cm (approximately 36 inches)
Cutting length: 92 cm
Cutting precision: High precision for accurate cuts.
Cutting material: Suitable for cutting paper, cardboard, and similar materials.
Comprising:

Polar 92 X (2010)
Polar RA 2 jogger with air removal (2010)
Polar lift

Heidelberg KSB Cilinder

Format 40x57 cm

Wook il WTNS S1700 die cutting machine

Year of construction: 2000
Max. pressure 350 TON



Maximum size: 1200×1700mm

Minimum size: 600 x 850 mm

Nebiolo Athena die Cutting

size 60×80

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,

Durchmesser: . mm
Schneiden (Anzahl): . 0
Gewicht: . kg

Wookil WTNS 1700 semi automatic die cutting machine

Year 2000
Max size 1200x 1700 mm
Min size: 600 x 850 mm
Max pressure 350 tons

Powered Feed Roller

Cutting Shear: 3 knife units
Creasing unit: 8 creasing units

Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000

Automatic closing window

Hardened die plate

Heidelberg KSBA cilinder

Max size: 46x 58.5 cm
Die cutting cilinder with inking unit

Polar 76 EM Papercutter

Year: 1990
Cutting size: 76 cm

Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools

Heidelberg A4 Tiegel

Horizon APC T 61
Complete with tools and spare knife

ETF sample cutting machine

Carpet sample cutting machine
Year 1996

– Two changeable cutting bars with rotating blades
– Timed cutting start
– Automatic length adjustment.
– Complete with tool for lifting carpet rolls

Sandt 150 ton die cutting machine

– Max format 1.53 x 1.1 meter
– Updated to modern safety standards

A perfectly presented sample sells your floorcovering. So investing in the ETF sample cutting machine is a wise decision. It operates very quickly and reliably for any kind of carpet,
needle felt or vinyl. The machine produces cut samples with a minimum dimension of 5x13 cm (w x l) with an accuracy of better than 1 mm. Operation costs are lower as no dies are required.

Rabolini imperia (75×105)

4 punched windows
Maximum size in die frame (75×105)
2 hand operated

Heidelberg S-cilinder

Format: 54 x 72 cm
No damage
With inking unit.

Polar 76 EM

Year: 1986
Chrome table with air
Complete with:
- Spare knife
- Knife change tools

In good working condition, cleaned and checked.