-1_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
-6_thumb.jpg "Show advert")
-8_thumb.jpg "Show advert")
-9_thumb.jpg "Show advert")
8
Printing machineryLabel printing and die-cutting machine
Simplacutter VI
Max dimensions: 200x 120 cm
Simplacutter VI
Max dimensions: 200x 120 cm
Max dimensions: 200x 120 cm
-1_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
13
Printing machineryLabel printing and die-cutting machine
Heidelberg KSB Cilinder
Format 40x57 cm
Heidelberg KSB Cilinder
Format 40x57 cm
Format 40x57 cm
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
10
Printing machineryPost press machinesLaminating machines
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
4
Printing machineryLabel printing and die-cutting machine
Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,
Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,
Metal working and machine toolsAccessories and spare parts
Diameter: . mm
Cutting (number): . 0
Weight: . kg
Diameter: . mm
Cutting (number): . 0
Weight: . kg
Cutting (number): . 0
Weight: . kg
_thumb.jpeg "Show advert")
3
Printing machineryPost press machinesDie cutter
Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000
Automatic closing window
Hardened die plate
Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000
Automatic closing window
Hardened die plate
Model VA
Year of construction 2000
Automatic closing window
Hardened die plate
4
Printing machineryLabel printing and die-cutting machine
Heidelberg KSBA cilinder
Max size: 46x 58.5 cm
Die cutting cilinder with inking unit
Heidelberg KSBA cilinder
Max size: 46x 58.5 cm
Die cutting cilinder with inking unit
Max size: 46x 58.5 cm
Die cutting cilinder with inking unit
-1_thumb.jpg "Show advert")
-3_thumb.jpg "Show advert")
-2_thumb.jpg "Show advert")
-4_thumb.jpg "Show advert")
-5_thumb.jpg "Show advert")
6
Printing machineryCutting machines
Polar 76 EM Papercutter
Year: 1990
Cutting size: 76 cm
Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools
Polar 76 EM Papercutter
Year: 1990
Cutting size: 76 cm
Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools
Year: 1990
Cutting size: 76 cm
Chrome table with air
Quick knife height adjustment
Complete with spare knife, knife change tools
6
Printing machineryLabel printing and die-cutting machine
Heidelberg A4 Tiegel
Heidelberg A4 Tiegel
4
Printing machineryCutting machines
Horizon APC T 61
Complete with tools and spare knife
Horizon APC T 61
Complete with tools and spare knife
Complete with tools and spare knife
8
Printing machineryLabel printing and die-cutting machine
Sandt 150 ton die cutting machine
– Max format 1.53 x 1.1 meter
– Updated to modern safety standards
Sandt 150 ton die cutting machine
– Max format 1.53 x 1.1 meter
– Updated to modern safety standards
– Max format 1.53 x 1.1 meter
– Updated to modern safety standards