Dari DBS-SE4.0 Air compressor, Serial, 4010770002, 2018, air compressor, 4.0Kw, 5.5HP, Bar 10, 200L tank, 3Ph

NFM L200IV, 200L universal cutter mixer, Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge, we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. There is a custom designed stair to reach the feeding level of the bowl and control the operati

Atlas Copco ZT30 Air compressor, Serial: AIF065085, 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

Atlas Copco ZT30 Air compressor, Serial: AIF065086, 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

Herma 752C labeller, Serial: 80002791, 2019, Stainless, Herma H400 labeller, on height adjustable frame, conveyor dimensions 1100mm x 230mm, with Zodiac HS printer and touch screen, with wiring diagram, 1Ph

Teknomek Low level bench, Stainless, low level bench with 16 pair shoe rack, 2000mm x 370mm

Teknomek low level bench, Stainless, low level bench, 2000mm x 350mm

IWM SAN100 SP Sanitiser tunnel, 2010, stainless, aperture 600mm x 600mm, belt dimensions 1800mm x 600mm, with recirculation tank, filter, level sensor, 3Ph

Allfill SHA15 Auger filler , Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph

Injectstar Vacuum tumbler, Stainless, 1200L tumbler, variable speed, timer controls, with vacuum, 3Ph

Ruhle MKR130 Tumbler, 2015, Stainless, 130l tumbler, 3Kw, mobile, 3Ph

Cintex Sentry Metal detector, Stainless, belt dimensions 1400mm x 290mm, aperture 400mm x 220mm, intralox belt, mobile, 3Ph

Injectstar ES1100 Vacuum tumbler, 2007, Stainless, 1100L capacity, tumbler with vacuum, HMI touch screen control, removable lid, 3Ph

Logopak 920 IIP labeller, Serial: 2040294, 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph

Nederman CARZ FL200 Explosion isolation flap valve, Serial: S12044, 2017, Explosion isolation flap valve, see plate for spec

Daikin ERQ200A7W1B Condensing unit, Serial: 8008515, 2020, condensing unit, Gas R410A, 3Ph

Arnott 90 degree conveyor, 2019, Stainless, 90 degree, slat chain conveyor, variable speed, with side guides, belt width 250mm, length 2400mm to the bend and 1000mm after bend, mobile, 3Ph

Zumex Speed Pro self service Juicer, Serial: 436746, 2016, Stainless juicer, capable of very quick performance and can juice 40fruits a minute while still producing an incredibly high yield, up to 4.5L of juice per min, mobile, 1Ph

Riggs 1000 Three head filler, Serial: TT1737, 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings

Emerito 1.8 Capper, Serial: 624-p165, 2016, Twist -off capping machine, lids from TO27 - TO82 diameter, height of lid up to 18mm DTO, Containers from diameter 30mm to 106mm, height from 40mm to 260mm, up to 70 bottles per min, variable speed, previously used on 50mm caps, 3Ph

MEP AVT400 Capping machine, Serial: 271221, 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph

Kiesel RG0 Wine tank agitator, Serial: 10640, 2020, Stainless propeller mixer, 600mm shaft length, 0.37Kw motor, up to 15,000L tank, 1400RPM, 3Ph

Letina PZP1100 Variable capacity tank, Serial: 146720, 2020, Stainless, Variable capacity tank, max capacity 1100L, with floating lid and inflatable gasket achieves an air tight seal

Dalmec PMC Barrel Drum lifter, Serial: 935719, 2009, Dalmec PRC, clamp jaws type, especially designed for picking and emptying drum. Barrels. Containers, one operator, max load 300Kg, with spare clamps and manual

Dalmec PRC Barrel Drum lifter, Serial: 324899, 2003, Dalmec PRC, clamp jaws type, especially designed for picking and emptying drum. Barrels. Containers, one operator, max load 250Kg

STS STP01 Power clamp drum tipper, Power clamp drum tipper can lift and tip drums and barrels from 50L to 220L, the unit is pneumatic-hydraulic powered, 350Kgs SWL, mobile

AC Hydraulic DT300H Hydraulic drum trolley, Serial: 281280, Hydraulic drum trolley, designed to lift 200l drums, equipped with a gripping device, mobile

Alfa Laval LKH-UP70 Centrifugal pump, Year 2023, Serial: 298034, Stainless centrifugal pump, 22Kw motor, 3Ph

Arnott Stainless conveyor, 2019, Stainless, slat band conveyor, belt dimensions 1000mm x 250mm, mobile

Woods 56JM/20/4/6/10-36 flow extract fan, Year 2021, 560mm fan diameter, 1420 rev/min, see plate for spec, 5 in stock, 3Ph

DTB washing conveyor, Stainless, belt dimensions 1200mm x 300mm, with jet spray mounted on top of the conveyor with recirculation tank and pump for washing products, previously used for olives, 3Ph

Grundfos CHI2-30 A-W-G Pump, 2010, 2900RPM, 2.5M3/H, rated head 19M, 19mm impeller, max operating pressure 10bar, 3Ph (two in stock)

Hache 1720E Turbidimeter, Hach 1720E Continuous-reading Nephelometric Low Range Process Turbidimeter, Continuously flowing sample flows through the patented bubble removal system, which vents entrained air from the sample stream and eliminates the most significant interference in low level turbidity measurement. The 1720E Turbidimeter is not affected by variations in flow and pressure, The 1720E Turbidimeter uses the sc200 Controller to receive data from up to two sensors. A built-in data logger collects turbidity measurement at user selectable intervals (1-15 minutes), along with calibration and verification points, alarm history, and instrument setup changes for 6 months.

Europ-Plast VCPA315 centrifugal extraction fan, Serial: V9064, 2010, chemical resistant centrifugal extraction fan, 5.5Kw, all fans are manufacturered as direct drive assemblies and all casings are fully welded and come standard with chemical resistant vapor seals

Longwood D screen Fine screen, 2010, Dscreen simple design, operation and maintenance make it the ideal choice for reliable stand alone water filtration, fully enclosed unit, self cleaning screen, 0.8mm screens, Length 1200mm, width 1023mm, 0.37Kw motor, two available

Longwood Rotapak150 Screw compactor, 2010, screw compactor, screenings handling equipment, screw diameter 150mm, capacity 0.5M3/hr, 1.5Kw motor, 3Ph

Lowara 10HM02P11T5RVBE Multistage pump, Serial: 20170110, 2010, Horizontal multistage pump, mounted on stainless frame with Xylem flow meter, 1.23Kw, see plate for full spec

Sigma S2CAHM07120PVT Metering pump, Serial: 2010132518, 2010, 0.25Kw, Metering pumps, 3 in stock

Hoval Air receiver tank, 2010, capacity 500L, working temp -10'C to 45'C, max working pressure 10Bar,

AVK Flanged gate valve, 2010, flanged gate valves with handwheels, 10+ in stock, various sizes

Stanzkraft: 110 to
Ausladung: 610 mm
Anzahl der Stationen: 5
Max. Durchmesser bei Blechstärke (Baustahl): 40/20 bzw. 28/28 mm
Hub: 80 mm
Hubzahl: 28 1/min
Flachstahl: 600x15 / 400x20 mm
Winkelstahl: 152x152x13 mm
Rund-/Quadratstahl: 50 mm
Ausklinker: 13x52x90 mm
Motor: 9 kW
Länge: 2690 mm
Breite: 1400 mm
Höhe: 2200 mm
Gewicht: 3300 kg

Biegelänge: 4010 mm
Biegeleistung Stahl 400 N/mm²: 1.25 mm
Biegeleistung Alu 190 N/mm²: 2 mm
Schnittleistung elektrische Schere: 1.25 mm
Ständer-Spannarmeinheiten: 4
Anzahl der angetriebenen Biegeelemente: 4
Einlegetiefe: 1000 mm
Öffnungsweite: 190 mm
Arbeitshöhe: 835 mm
Motor: 2.2 kW
Länge mit elektrischer Schere: 5200 mm
Breite: 1300 mm
Höhe: 1900 mm
Gewicht: 1550 kg

Sägerahmen: Schwenkrahmen
Sägebandabmessungen: 4160x34x1,1 mm
Bandgeschwindigkeit stufenlos: 15 - 120 m/min
Schnittleistung 0° rund: 320 mm
Schnittleistung 0° quadratisch: 320 mm
Schnittleistung 0° flach: 450x320 mm
Schnittleistung 30°: rund 320 mm, quadrat 320 mm, rechteck 380x320 mm
Schnittleistung 45°: rund 320 mm, quadrat 320 mm, rechteck 330x320 mm
Schnittleistung - 30°: rund 320 mm, quadrat 320 mm, rechteck 380x320 mm
Schnittleistung - 45°: rund 320 mm, quadrat 300 mm, rechteck 340x320 mm
Schnittleistung - 60°: rund 230 mm, quadrat 220 mm, rechteck 230x220 mm
Arbeitshöhe: 860 mm
Hydraulikmotor: 0.37 kW
Motor: 2.2 kW
Kühlmittelpumpenmotor: 0.12 kW
Länge: 2230 mm
Breite: 1150 mm
Höhe: 2140 mm
Gewicht: 1030 kg

Ref.-Nr.: 18552
Hersteller: BOY
Baujahr: 1997

Schließeinheit
Schließkraft: 22 ton
Öffnungsweg: 200 mm
Holmmaß (h x v): 254 mm
Einbauhöhe min.: 200 mm
Einbauhöhe max.: 400 mm
Plattengröße (h x v): 425 x 400 mm

Spritzeinheit
Schneckendurchmesser: 28 mm
Spritzvolumen: 49 cm³
Spritzgewicht PS: 44 gr
Spritzdruck: 1069 bar

Maße und Gewichte
Abmessung LxBxH: 2.3 x 0.81 x 1.63 m
Maschinengewicht: 760 Kg

ATS US 2000 AB

- Ultra-Sonic banding machine
- Operation by foot or automatically by Photocell

Sägerahmen: Doppelsäulenführung
Sägebandabmessungen: 5750 x 41 x 1,3 mm
Bandgeschwindigkeit stufenlos: 20 - 120 m/min
Schnittleistung 0° rund: 420 mm
Schnittleistung 0° quadratisch: 420 mm
Schnittleistung 0° flach: 420 x 420 mm
Arbeitshöhe: 805 mm
Hydraulikmotor: 1.1 kW
Motor: 5.5 kW
Servomotor: 1 kW
Kühlmittelpumpenmotor: 0.12 kW
Länge: 2860 mm
Breite: 1980 mm
Höhe: 2100 mm
Gewicht: 3700 kg

Cauhe VA (1450 x 1850 mm) Die Cutter / Cauhe VA Heavy-Duty Large Format Die Cutter

Very neat machine, rarely used.

Max format: (1450 x 1850 mm)
Model: VA
Year: 2008

Available immediately!

Biegelänge: 2040 mm
Blechstärke (420 N/mm²): 3 mm
Max. Blechstärke - Edelstahl: 2 mm
Max. Blechstärke - Aluminium: 4.5 mm
Antrieb: Motorisch
Biegewangenmotor: 1.5 kW
Oberwangenmotor: 1.1 kW
Hinteranschlag: 750 mm
Öffnungsweite: 140 mm
Biegegeschwindigkeit: 50 °/sek
Länge: 3060 mm
Breite: 1650 mm
Höhe: 1500 mm
Gewicht: 2730 kg

Polar 92 XT

Year: 2007
Touch screen control

Normal and small clamping plate
Knife change tools
Spare knives
Big right side table
P-net Netwerk integration P-N V1.1.2

For Sale: Large Format Booklet Maker

Designed for digital and litho output
Max sheet length: 640mm
Creates: A4 landscape & portrait booklets
Functions: Jogging, stapling, folding
Optional: Modular T640 face trimmer
Automatic operation: Photo sensor detects sheets and cycles machine automatically
Capacity: Produces booklets up to 100 pages
Precise alignment: Side jogs sheets from both sides before stapling
Stapling:
2 stapling heads, 4 stapling positions
Clenched staple finish
Low staple warning & stop function
Space-saving design: Built-in conveyor stacker folds away when not in use
Energy-efficient: Drive motor shuts down automatically when idle
Resettable counter
Specifications:
Paper size: A5 to 640mm x 320mm
Power supply: 220V, 50Hz
📩 Contact us for pricing and more details!