Grassair / Allup compressor RLR30V8T

Capacity: 234 m3/h
bar max: 9.25
KW: 22

Bolzoni siccor lift

Max weight: 1000 kg
380 volt
Paltform 1250x 1650 mm

Simplacutter VI

Max dimensions: 200x 120 cm

Panel Saw Robland Z320
With scoring unit

Polar Mohr 92 X Cutting Line

Complete cutting line consisting of lift, vibrating table with air removal, and cutting machine, in good condition and available in February 2024.

Brand and model: Polar Mohr 92 X
Year of manufacture: 2010
Cutting width: 92 cm (approximately 36 inches)
Cutting length: 92 cm
Cutting precision: High precision for accurate cuts.
Cutting material: Suitable for cutting paper, cardboard, and similar materials.
Comprising:

Polar 92 X (2010)
Polar RA 2 jogger with air removal (2010)
Polar lift

Stock A134R-R5PS6M / 1650 x 2050P Laming machine

Sheet to board laminating machine for producing displays and packing material

Horizon AC 8000 S collating machine

* collating stations
* suctions feeder
* jogger with cris cross

Sallmetal Laminating machine

S1050

Max Laminating size: 105 cm

Polar Lw 450 lift

Format: 50x70 cm
Fotocel height detection

Heidelberg KSB Cilinder

Format 40x57 cm

Polar Mohr 78 ED paper guillotine

Technical data:
Cutting width 780mm
Stack height 120mm
Color LCD display
Power supply 400V
Weight 1400 kg
Side tables
Chrome table surface

Spare knife, cutting sticks, tapping block, maintenance tools.

RYOBI 524 HXX
COUNTER (MIO): 98
YEAR: 2003
SIZE (CM): 37,5 X 52
RYOBIMATIC DAMPENING
SEMI AUTOPLATE
AUTOMATIC BLANKET WASHER DEVICE
AUTOMATIC ROLLER WASHER DEVICE
POWDER SPRAYER
AVAILIBILITY: IMMEDIATELY

Scissor lift

380 volts
Max weight: 1200 kg.
Easy loading with pallet truck.
Equipped with foot protection.

Max height: 78 cm
Min height: 8 cm

Dimensions: 1.3 x 0.9 meters (suitable for Euro pallets)

Ryobi 524 HXX

Year 2004

Heidelberg GTP Hot Foil

size 34×46
with Hotfoil

Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames

Wook il WTNS S1700 die cutting machine

Year of construction: 2000
Max. pressure 350 TON



Maximum size: 1200×1700mm

Minimum size: 600 x 850 mm

Heidelberg GTP orignal hotfoil platen

Ideal 7228-95

Year 2003
Photcell safety
Spare knife

Sheetfed offset machine

2007 Ryobi 524-GX – 4 color- 36 x 52 cm
Ryobimatic
Semi-APC,
PCS-H 4 console

Hans Wahli stream feeder

complete with delivery belt

Polar RAB 4 Jogger

Year: 1998
With automatic side flaps and air removing roller

Polar 78 ES

Year 1996
Chrome air table
Complete with tools and spare knife

Nebiolo Athena die Cutting

size 60×80

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP

Year: 2003

Heidelberg GTP hot foil platen.

Serial GTP 63613
Complete with big hot foil chase

Beck packautomaten,

complete with shrink tunnel

Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,

Automatic closing, sea l/ shrink compartment

max format of product: 500 x 380 x 250 mm

Best regards,
Joris van Gompel

Wookil WTNS 1700 semi automatic die cutting machine

Year 2000
Max size 1200x 1700 mm
Min size: 600 x 850 mm
Max pressure 350 tons

Polar 92 EMC monitor

Chrome table with air
2 x 1m2 resopal side tables with air.

Polar 92 EMC monitor.

Snijbreedte: 92 cm
Chrome air table
Complete with tools and spare knife

Screenprinting machine 3/4 automat

Emm 3/4 automatic screenprinting machine Type 444 DVA.

With Trumax Hot, cold and UV drying unit.
and Trumax stacker

Viportech Executive

Vipromat executive semiautomatic ( 1189 x 841 mm)

2 x Hohner 48/5 S eyelet loop stitching heads

I'm good condition.
Price pro pice

Scissor lift

Max capacity: 500 kg
Platform: 1.5 x 1 meter.

Max height: 1.04 meter
Min height: 0.23 meter
380 Volt

Powered Feed Roller

Cutting Shear: 3 knife units
Creasing unit: 8 creasing units

GTS Countmaster 1053

With stoke inserter

230 volt
Max stack height: 140 mm
Max paper size: 350 x 600 mm
Min paper size: 45

Branson sonifier J-a 12 High frequency welding device

230 volt,

Ascon
Model: 1000
Year 2002

Automatic rotating

Afmeting 72 x 115 cm
Capacity 1000 kg

Complete humidification system

WIth 3 hymodification units:

ML Princess 2 is part of a complete high pressure humidification system with one or more humidification units.
Every unit consists of a nozzle ring with 8 nozzles and a built-in fan. ML princess 2

Rietschle / Polar Blower

Year: 1993
Type: CEV 3709-D 5

Motor: 1.1 KW

Polar 155 EMC 1 with microcut system

Year 1980
Complete with spare knife
Cutting size 155 cm

Polar 145 EL

With Gergeck System six computer installed
Cutting width 145 cm

Complete with spare knife

Characteristics: ZAPAK ZP93 A, complete with trolley and now roll of strapping material

Adjustable force, ZP93A maximum 250 kg (2500 N)
Bosch 18V Li-Ion 4.0Ah rechargeable battery for +/- 440 straps
Very high friction on the seal, no need for metal clamps anymore
Adjustable sealing time
The lightest strapper in the market in terms of weight
Easy “One-Step” strapping entry
Computer controlled operation monitoring system
Self-adjustable tire width at the front and rear to ensure the perfect tire
Cutting blade and other consumable parts are easily replaceable
Technical specifications
Power supply: rechargeable battery
Sealing type: friction

Belt tension: automatic/manual
Strap material: PP and PET strap
Material thickness: PP and PET 0.70 - 1.27 mm
Material width: PP and PET 9 - 16 mm
Seal recovery: 80%+-5% of tire breaking strength
Sealing time: adjustable from 0.6 to 4.8 seconds
Force setting: from 10 kg to 250 kg
Weight: 3.4 kg, including battery

Workingwidth 1500 mm

Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct

Becker DVT 60

Cauhe VA ( 1450 x 1850 mm ) die cutting machine
Model VA
Year of construction 2000

Automatic closing window

Hardened die plate

Rietschle Druvac KTA 100/2

Year 1996
Volume: 100m3/h
Pressure: +0,7 bar
Vacuum - 0.6 bar