Theisen and Bonitz Sprint B312 VP (2008)


12 stations half pile + 304 QSM three-cutter

Year of construction 2008

Horizon bq 260 perfect binder
Gluing machine

Round cornering machine polygraph

Knife radius R7
Robust quality

Polar 92 cutter
Touch screen control
Complete with tools and spare blade
In good working condition

Possible with ra2 jogger and lift

Plate punch Ryobi 52

Printsystem GMBH

Kodak Nexpress SX 3300

With BDT TPF 550 LT feeder
Technotrans ECS -110

Folding machine
Heidelberg-Stahlfolder KH 78-82/4KL
Year: 2011
Description:
- 16 page folder
Feeder
- Round pile feeder: RFH-82
- Pump: Becker
Folding unit
- perforation shaft
- Parallel fold unit with 4 buckle plates: BUH-82
- Perforating shaft
- First cross fold: CUH-78
- Second cross fold to the left: CUH-78
- Noise hood over the entire folding section
- Touch screen display.
- Fully automatic adjusting by display.
Delivery:
Heidelberg-Stahlfolder Twinstacker TSH-50
Year: 2011
- Vertical stack delivery with pressing and marking device
- Twin stack delivery

Cauhe II

MODEL II
Format cm. 82x112
Pressure Tm/dm2 2,5
Net weight Kg. 4400
Motor Power Kw 4

Ceelen 78

Microcut interface
photocel safety
Chrome table with air
Spare knife, knife change tools

ATS Ultra Sonic 2000-L Banding machine

ATS Band white 30 mm,
230 Volt

Screw Compressor Airpress APS 10D

10 bar 10 pk/7.5 kW 1000 l/min
Year 2008, in good working condition

Complete with air dryer airpress APX 12( E3)
Year 2021

Flexo wash pk13o washing device

Dimensions inside 120 x 80 cm

Nilpeter FA 2500

Year 2002
6 color

Unwind,
Fife Web Guide Splice Table,
Versatec Web tension Control
6 x Flexo Print Units,
DPL UV Drying system,
Kelva Webcleaner K-15
Hot air dryers
Lamination Unwind,
3 x Rotary Die Slots,
Touch Screen Control,
Slitting Unit
Product Rewind
BST Powerscope digital 4000 Web Inspection Camera,

Tooling:
Print Cylinders
120 z x 6
117 z x 11
113 z x 6
110 z x 6
106 z x 6
102 z x 6
100 z x 6
96 z x 6
93 z x 6
90 z x 6
88 z x 6
84 z x 6
80 z x 6
76 z x 6
74 z x 6
72 z x 6
70 z x 6
68 z x 6
64 z x 6
62 z x 6
60 z x 6
58 z x 6

Mag Cylinders none

Heidelberg SBG 56×77 cm

With safety covers
Year 1964

Heidelberg Printmaster 52-2

Year 2008

Baldwin cooling system
Double-sheet control
Easyplate
Blanked washer
Total impressions: ± 21 mil. imp.

Ryobi 524 HXX offset press

COUNTER (MIO): 98
YEAR: 2003
SIZE (CM): 37,5 X 52
RYOBIMATIC DAMPENING
SEMI AUTOPLATE
AUTOMATIC BLANKET WASHER DEVICE
AUTOMATIC ROLLER WASHER DEVICE
POWDER SPRAYER
AVAILIBILITY: IMMEDIATELY
CLEANED

Polar L 450 W-1 Lift

Plateau : 84x62 cm

De Witt Pallet wrapper

Automatic on program or manualy wrapping
Supply: 230 volt
Phase: 1
Power: 1250 W

Cauhe II

Year 2004
Format: 82x112 cm
Weight 4400 kg
Heated Plate

Trotec 8005 professional C100

Head Extraction
Chiller Unit
Max workpiece surface 1500x1500 x 135 mm
Power consumption: 2600W/25A

Grassair / Allup compressor RLR30V8T

Capacity: 234 m3/h
bar max: 9.25
KW: 22

Bolzoni siccor lift

Max weight: 1000 kg
380 volt
Paltform 1250x 1650 mm

Simplacutter VI

Max dimensions: 200x 120 cm

Panel Saw Robland Z320
With scoring unit

Polar Mohr 92 X Cutting Line

Complete cutting line consisting of lift, vibrating table with air removal, and cutting machine, in good condition and available in February 2024.

Brand and model: Polar Mohr 92 X
Year of manufacture: 2010
Cutting width: 92 cm (approximately 36 inches)
Cutting length: 92 cm
Cutting precision: High precision for accurate cuts.
Cutting material: Suitable for cutting paper, cardboard, and similar materials.
Comprising:

Polar 92 X (2010)
Polar RA 2 jogger with air removal (2010)
Polar lift

Stock A134R-R5PS6M / 1650 x 2050P Laming machine

Sheet to board laminating machine for producing displays and packing material

Horizon AC 8000 S collating machine

* collating stations
* suctions feeder
* jogger with cris cross

Sallmetal Laminating machine

S1050

Max Laminating size: 105 cm

Polar Lw 450 lift

Format: 50x70 cm
Fotocel height detection

Heidelberg KSB Cilinder

Format 40x57 cm

Polar Mohr 78 ED paper guillotine

Technical data:
Cutting width 780mm
Stack height 120mm
Color LCD display
Power supply 400V
Weight 1400 kg
Side tables
Chrome table surface

Spare knife, cutting sticks, tapping block, maintenance tools.

RYOBI 524 HXX
COUNTER (MIO): 98
YEAR: 2003
SIZE (CM): 37,5 X 52
RYOBIMATIC DAMPENING
SEMI AUTOPLATE
AUTOMATIC BLANKET WASHER DEVICE
AUTOMATIC ROLLER WASHER DEVICE
POWDER SPRAYER
AVAILIBILITY: IMMEDIATELY

Scissor lift

380 volts
Max weight: 1200 kg.
Easy loading with pallet truck.
Equipped with foot protection.

Max height: 78 cm
Min height: 8 cm

Dimensions: 1.3 x 0.9 meters (suitable for Euro pallets)

Ryobi 524 HXX

Year 2004

Heidelberg GTP Hot Foil

size 34×46
with Hotfoil

Heidelberg SBB ( 56×82 cm) Gray cylinder

Very nice Heidelberg SBB cylinder

Fitted with safety covers with switches.
Electronics renewed.

Complete with 2 punch frames

Wook il WTNS S1700 die cutting machine

Year of construction: 2000
Max. pressure 350 TON



Maximum size: 1200×1700mm

Minimum size: 600 x 850 mm

Heidelberg GTP orignal hotfoil platen

Ideal 7228-95

Year 2003
Photcell safety
Spare knife

Sheetfed offset machine

2007 Ryobi 524-GX – 4 color- 36 x 52 cm
Ryobimatic
Semi-APC,
PCS-H 4 console

Hans Wahli stream feeder

complete with delivery belt

Polar RAB 4 Jogger

Year: 1998
With automatic side flaps and air removing roller

Polar 78 ES

Year 1996
Chrome air table
Complete with tools and spare knife

Nebiolo Athena die Cutting

size 60×80

Stock LM 123


A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.

Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.

Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.

A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).

Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt

Beck MP 240 X Foil Packaging Machine
Model: Multiplex type MP

Year: 2003

Heidelberg GTP hot foil platen.

Serial GTP 63613
Complete with big hot foil chase

Beck packautomaten,

complete with shrink tunnel

Label Producing BLUMER ATLAS 115,
complete line with die cutting unit D-18 and Bandrolling Machine PB 18.1 incl. strip feeder of Blumer and delivery table behind Blumer, size min: 25×45 mm, max. 150×180 mm,

Automatic closing, sea l/ shrink compartment

max format of product: 500 x 380 x 250 mm

Best regards,
Joris van Gompel