D&K Europa System B2 Laminator automatic laminating mach
D&K Europa System B2 Laminator
_1.jpeg "Show advert")
_2.jpeg "Show advert")
_3.jpeg "Show advert")
_4..jpeg "Show advert")
_5.jpeg "Show advert")
_6.jpeg "Show advert")
_7.jpeg "Show advert")
_8.jpeg "Show advert")
8
Advert data
Machine designation
D&K Europa System B2 Laminator automatic laminating mach
Manufacturer
D&K
Type
Europa System B2 Laminator
Year of manufacture
2013
Condition
used
Location of the advert
Nijverheidsstraat 7 B, 5531AA Bladel, Netherlands
Description
D&K Europa System B2 Laminator automatic laminating machine
Technical data:
Max sheet size: 540mm x 740mm
Min sheet size: 210mm x 220mm
Min grammage: 115 gsm
Max grammage: 400 gsm
Operating temperature: 80-145°C
Weight: 750 kg
Power supply 380V
Steel, chrome-plated cylinder
Pneumatic pressure, separation and automatic feeding from a high stack.
Sheet feeding accuracy: ±2.0mm.
Touch panel for easy operation.
Sheet straightening module.
Technical data:
Max sheet size: 540mm x 740mm
Min sheet size: 210mm x 220mm
Min grammage: 115 gsm
Max grammage: 400 gsm
Operating temperature: 80-145°C
Weight: 750 kg
Power supply 380V
Steel, chrome-plated cylinder
Pneumatic pressure, separation and automatic feeding from a high stack.
Sheet feeding accuracy: ±2.0mm.
Touch panel for easy operation.
Sheet straightening module.
These adverts may also interest you
7
Post press machinesLaminating machines
Stock A134R-R5PS6M / 1650 x 2050P Laming machine
Sheet to board laminating machine for producing displays and packing material
Stock A134R-R5PS6M / 1650 x 2050P Laming machine
Sheet to board laminating machine for producing displays and packing material
Sheet to board laminating machine for producing displays and packing material
8
Post press machinesLaminating machines
Sallmetal Laminating machine
S1050
Max Laminating size: 105 cm
Sallmetal Laminating machine
S1050
Max Laminating size: 105 cm
S1050
Max Laminating size: 105 cm
_thumb.jpg "Show advert")
_thumb.jpg "Show advert")
10
Post press machinesLaminating machines
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
Stock LM 123
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
A simple semi-automatic spot labeling machine suitable for running (labeling) substrate sheets, flat boxes, blanks, as well as pre-folded (RSC´s) with litho printed labels. Equipped with an automatic label feeder and take-off table. The label is mounted to the lower side of the substrate sheet.
Label Feeder (4E): Suction feeder, for automatically feeding of the labels. The labels have to be pre-loaded on the pile board by hand. Pre-loading height: approx. 7.8”. On sheet removal the pile is re-timing automatically. A suction bar is separating the labels at their front edge, always sucking a single sheet and transporting it into the machine.
Label Registering Unit (LM-1) includes a timed suction conveyor that incorporates a separate motor drive that takes the glued labels after leaving the gluing unit and automatically registers the labels. Precise registration is achieved utilizing the unit’s adjustable side and rear edge guides that are set to the dimensions required for the proper registration of the corrugated sheet or box.
A 2-cylinder gluing unit is utilized for glue application and metering roller with stripping needles. The glue is applied to the label that is then stripped off the application roller by special stripping needles. The litho printed label will always be glued. The Model LM includes an automatic glue-feeding system with diaphragm pump (P).
Squeeze roller that presses the labelled sheets and blanks together.
Integrated sensor for detecting and registering the glued label
Label registering unit for placing and applying the corrugated blank to the glued label
Manual feeding of the corrugated blank or box pressure roller
Take-off table for the manual take-off of the labeled sheets / blanks.
Integrated sheet counter.
Siemens PLC control.
Suction belt
4
Post press machinesLaminating machines
Workingwidth 1500 mm
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
Workingwidth 1500 mm
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
Substrate Feeder automatic suction feeder
Laminate Feeder by hand
Details with pressing roll, with pressing belt
Delivery table
Available Direct
10
Post press machinesLaminating machines
Paperplast international Dry 40
Format: 76x102
Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater
Paperplast international Dry 40
Format: 76x102
Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater
Format: 76x102
Consisting of:
Sheet feeder
Calander
Separator Stacker
Offline heater
