Report advert 20.12.2024 new

Hydraulic single column press HESSE by DIRINLER CDHC 1600

HESSE by DIRINLER CDHC 1600


  • Hydraulic single column press HESSE by DIRINLER CDHC 1600
    1
     

    Advert data


    Reference number
    #A-374
    Machine designation
    Hydraulic single column press HESSE by DIRINLER CDHC 1600
    Manufacturer
    HESSE by DIRINLER
    Type
    CDHC 1600
    Condition
    new
    Location of the advert
    Industriezentrum Nö-süd Straße 4 - Objekt 8, 2351 Wiener neudorf, Austria
    Price
    On request
     

    Description


    pressing capacity: 160 to
    Stroke: 400 mm
    Ram: 1000x680 mm
    Table: 1000x750 mm
    Daylight: 765 mm
    Rapid speed: 250 mm/s
    Working speed: 10-20 mm/s
    Motor: 22 kW
    Length: 2400 mm
    Width: 1525 mm
    Height: 3900 mm
    Weight: 10500 kg

    These adverts may also interest you

    2
    pressing capacity: 175 to Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Inside distance between side frames: 2600 mm Gap in side frame: 410 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 200 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 200 Back gauge travel X-axis: 650 mm Back gauge speed X-axis: 500 Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 2x4 kW Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: 10900 kg
    pressing capacity: 175 to
    Bending length: 3050 mm
    Axes: Y1 / Y2 / X and R axis
    Stroke: 265 mm
    Inside distance between side frames: 2600 mm
    Gap in side frame: 410 mm
    Daylight: 530 mm
    Power concept: hydraulic
    rapid speed Y-axis: 200 mm/s
    Working speed Y-axis: 10
    Retractionspeed Y-axis: 200
    Back gauge travel X-axis: 650 mm
    Back gauge speed X-axis: 500
    Back gauge travel R-axis: 250 mm
    Table height: 900 mm
    Table width: 104 mm
    Motor power: 2x4 kW
    Length: 4250 mm
    Width: 1700 mm
    Height: 2750 mm
    Weight: 10900 kg
    3
    pressing capacity: 20 to Stroke: 185 mm Max. bending capacity - mild steel: 200 x 12 mm Table: 480 x 1060 mm Height of pins: 200 mm Pin diameter: 80 mm Working speed: 10 mm/s Retraction speed: 10 mm/s Motor: 2.2 kW Working height: 930 mm Length: 1150 mm Width: 480 mm Height: 1200 mm Weight: 530 kg
    pressing capacity: 20 to
    Stroke: 185 mm
    Max. bending capacity - mild steel: 200 x 12 mm
    Table: 480 x 1060 mm
    Height of pins: 200 mm
    Pin diameter: 80 mm
    Working speed: 10 mm/s
    Retraction speed: 10 mm/s
    Motor: 2.2 kW
    Working height: 930 mm
    Length: 1150 mm
    Width: 480 mm
    Height: 1200 mm
    Weight: 530 kg
    11
    Bending length: 1250 mm Sheet thickness (420 N/mm²): 1.25 mm Max. thickness - stainless steel: 0.8 mm Max. thickness - aluminium: 2 mm Max. bending angle: 150 ° Back gauge manual: 500 mm Max. opening width without tools: 200 mm Upper tool: geteilt, 45° Bending flange: adjustment 35 mm Length: 1500 mm Width: 750 mm Height: 1715 mm Weight: 315 kg
    Bending length: 1250 mm
    Sheet thickness (420 N/mm²): 1.25 mm
    Max. thickness - stainless steel: 0.8 mm
    Max. thickness - aluminium: 2 mm
    Max. bending angle: 150 °
    Back gauge manual: 500 mm
    Max. opening width without tools: 200 mm
    Upper tool: geteilt, 45°
    Bending flange: adjustment 35 mm
    Length: 1500 mm
    Width: 750 mm
    Height: 1715 mm
    Weight: 315 kg
    7
    Blade length: 197 mm Sheet thickness (420 N/mm²): 4 mm Sheet thickness (600 N/mm²): 2 mm Strokes: 20 1/min Angle: 90 ° Motor: 4 kW Length: 890 mm Width: 780 mm Height: 1115 mm Weight: 550 kg
    Blade length: 197 mm
    Sheet thickness (420 N/mm²): 4 mm
    Sheet thickness (600 N/mm²): 2 mm
    Strokes: 20 1/min
    Angle: 90 °
    Motor: 4 kW
    Length: 890 mm
    Width: 780 mm
    Height: 1115 mm
    Weight: 550 kg
    4
    Coil weight: 500 kg Coil outer diameter: 1200 mm Min. coil inner diameter: 470 mm Max. Coil inner diameter: 520 Max. coil width: 300 mm Min. Coil width: 50 Min. coil width for version with pneumatic downholder: 80 mm Motor: 0.55 kW Length: 1400 mm Width: 1200 mm Height: 1550 mm Weight: 190 kg
    Coil weight: 500 kg
    Coil outer diameter: 1200 mm
    Min. coil inner diameter: 470 mm
    Max. Coil inner diameter: 520
    Max. coil width: 300 mm
    Min. Coil width: 50
    Min. coil width for version with pneumatic downholder: 80 mm
    Motor: 0.55 kW
    Length: 1400 mm
    Width: 1200 mm
    Height: 1550 mm
    Weight: 190 kg
    9
    Punching power: 110 ton Throat depth: 300 mm Number of stations: 5 Cylinder: 2 Max. diameter at sheet thickness (mild steel): 40x20 (28x28) mm Stroke: 80 mm Strokes: 17 1/min Flat steel: 600x15 (400x20) mm Blade length: 605 mm Angle steel: 152x152x13 mm Round / square steel: 50/50 mm Notcher: 90x52x13 mm Motor: 5 kW Length: 2130 mm Width: 1200 mm Height: 2200 mm Weight: 2500 kg
    Punching power: 110 ton
    Throat depth: 300 mm
    Number of stations: 5
    Cylinder: 2
    Max. diameter at sheet thickness (mild steel): 40x20 (28x28) mm
    Stroke: 80 mm
    Strokes: 17 1/min
    Flat steel: 600x15 (400x20) mm
    Blade length: 605 mm
    Angle steel: 152x152x13 mm
    Round / square steel: 50/50 mm
    Notcher: 90x52x13 mm
    Motor: 5 kW
    Length: 2130 mm
    Width: 1200 mm
    Height: 2200 mm
    Weight: 2500 kg
    5
    pressing capacity: 60 to Bending length: 2550 mm Axes: Y1 / Y2 and X-axis Stroke: 160 mm Inside distance between side frames: 2150 mm Gap in side frame: 250 mm Daylight: 350 mm Power concept: hydraulic rapid speed Y-axis: 120 mm/s Working speed Y-axis: 9 Retractionspeed Y-axis: 70 Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm Back gauge speed X-axis: 250 Table height: 813 mm Table width: 104 mm Oiltank: 100 l Motor power: 5.5 kW Length: 3250 mm Width: 1200 mm Height: 2350 mm Weight: 4250 kg
    pressing capacity: 60 to
    Bending length: 2550 mm
    Axes: Y1 / Y2 and X-axis
    Stroke: 160 mm
    Inside distance between side frames: 2150 mm
    Gap in side frame: 250 mm
    Daylight: 350 mm
    Power concept: hydraulic
    rapid speed Y-axis: 120 mm/s
    Working speed Y-axis: 9
    Retractionspeed Y-axis: 70
    Back gauge travel X-axis: 620 (with optional R-axis: 500 mm) mm
    Back gauge speed X-axis: 250
    Table height: 813 mm
    Table width: 104 mm
    Oiltank: 100 l
    Motor power: 5.5 kW
    Length: 3250 mm
    Width: 1200 mm
    Height: 2350 mm
    Weight: 4250 kg
    4
    pressing capacity: 175 to Bending length: 3050 mm Axes: Y1 / Y2 / X / R axes Stroke: 265 mm Inside distance between side frames: 2600 mm Gap in side frame: 450 mm Daylight: 530 mm Power concept: hydraulic rapid speed Y-axis: 160 mm/s Working speed Y-axis: 10 Retractionspeed Y-axis: 100 Back gauge speed X-axis: 500 Back gauge speed R-axis: 350 mm/s Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oiltank: 250 l Motor power: 18.5 kW Length: 4250 mm Width: 1700 mm Height: 2850 mm Weight: 10900 kg
    pressing capacity: 175 to
    Bending length: 3050 mm
    Axes: Y1 / Y2 / X / R axes
    Stroke: 265 mm
    Inside distance between side frames: 2600 mm
    Gap in side frame: 450 mm
    Daylight: 530 mm
    Power concept: hydraulic
    rapid speed Y-axis: 160 mm/s
    Working speed Y-axis: 10
    Retractionspeed Y-axis: 100
    Back gauge speed X-axis: 500
    Back gauge speed R-axis: 350 mm/s
    Back gauge travel R-axis: 250 mm
    Table height: 900 mm
    Table width: 104 mm
    Oiltank: 250 l
    Motor power: 18.5 kW
    Length: 4250 mm
    Width: 1700 mm
    Height: 2850 mm
    Weight: 10900 kg
    3
    Punching power: 50 ton Throat depth: 177 mm Number of stations: 5 Cylinder: 1 Max. diameter at sheet thickness (mild steel): 31 x 12 mm Strokes: 34 1/min Flat steel: 350 x 15 mm Angle steel: 80 x 8 mm Round / square steel: 35 / 30 mm Notcher: 10 mm Bending unit: 100 x 10 mm Motor: 3 kW Length: 1300 mm Width: 1100 mm Height: 1850 mm Weight: 950 kg
    Punching power: 50 ton
    Throat depth: 177 mm
    Number of stations: 5
    Cylinder: 1
    Max. diameter at sheet thickness (mild steel): 31 x 12 mm
    Strokes: 34 1/min
    Flat steel: 350 x 15 mm
    Angle steel: 80 x 8 mm
    Round / square steel: 35 / 30 mm
    Notcher: 10 mm
    Bending unit: 100 x 10 mm
    Motor: 3 kW
    Length: 1300 mm
    Width: 1100 mm
    Height: 1850 mm
    Weight: 950 kg
    6
    Sheet Thickness - mild steel: 0.6 - 4 mm Max. sheet width: 300 mm Max. cross-section: 900 mm Feed roll diameter: 80 mm Motor torque: 10 Nm Motor: 2.62 kW Length: 1000 mm Width: 800 mm Height: 1400 mm Weight: 330 kg
    Sheet Thickness - mild steel: 0.6 - 4 mm
    Max. sheet width: 300 mm
    Max. cross-section: 900 mm
    Feed roll diameter: 80 mm
    Motor torque: 10 Nm
    Motor: 2.62 kW
    Length: 1000 mm
    Width: 800 mm
    Height: 1400 mm
    Weight: 330 kg
    7
    Coil weight: 1250 kg Coil outer diameter: 1300 mm Min. coil inner diameter: 450 - 520 mm Max. coil width: 300 mm Min. coil width for version with pneumatic downholder: 80 mm Motor: 0.75 kW Length: 1800 mm Width: 1400 mm Height: 1700 mm Weight: 420 kg
    Coil weight: 1250 kg
    Coil outer diameter: 1300 mm
    Min. coil inner diameter: 450 - 520 mm
    Max. coil width: 300 mm
    Min. coil width for version with pneumatic downholder: 80 mm
    Motor: 0.75 kW
    Length: 1800 mm
    Width: 1400 mm
    Height: 1700 mm
    Weight: 420 kg
    1
    Punching power: 80 ton Throat depth: 510 mm Max. diameter at sheet thickness (mild steel): 40x14 mm Max. number of strokes at 20 mm stroke: 40 1/min Motor: 9 kW Length: 1700 mm Width: 1300 mm Height: 2050 mm Weight: 1715 kg
    Punching power: 80 ton
    Throat depth: 510 mm
    Max. diameter at sheet thickness (mild steel): 40x14 mm
    Max. number of strokes at 20 mm stroke: 40 1/min
    Motor: 9 kW
    Length: 1700 mm
    Width: 1300 mm
    Height: 2050 mm
    Weight: 1715 kg
    1
    Punching power: 55 ton Throat depth: 750 mm Max. diameter at sheet thickness (mild steel): 40x14 mm Max. number of strokes at 20 mm stroke: 37 1/min Motor: 9 kW Length: 1930 mm Width: 1200 mm Height: 1800 mm Weight: 1885 kg
    Punching power: 55 ton
    Throat depth: 750 mm
    Max. diameter at sheet thickness (mild steel): 40x14 mm
    Max. number of strokes at 20 mm stroke: 37 1/min
    Motor: 9 kW
    Length: 1930 mm
    Width: 1200 mm
    Height: 1800 mm
    Weight: 1885 kg
    2
    Coil weight: 4000 kg Coil outer diameter: 1300 mm Min. coil inner diameter: 450 - 550 mm Max. coil width: 600 mm Min. Coil width: 50 Min. coil width for version with pneumatic downholder: 80 mm
    Coil weight: 4000 kg
    Coil outer diameter: 1300 mm
    Min. coil inner diameter: 450 - 550 mm
    Max. coil width: 600 mm
    Min. Coil width: 50
    Min. coil width for version with pneumatic downholder: 80 mm
    2
    Coil weight: 2500 kg Coil outer diameter: 1300 mm Min. coil inner diameter: 450 mm Max. Coil inner diameter: 550 Max. coil width: 600 mm Min. Coil width: 50 Min. coil width for version with pneumatic downholder: 80 mm
    Coil weight: 2500 kg
    Coil outer diameter: 1300 mm
    Min. coil inner diameter: 450 mm
    Max. Coil inner diameter: 550
    Max. coil width: 600 mm
    Min. Coil width: 50
    Min. coil width for version with pneumatic downholder: 80 mm
    2
    Coil weight: 2500 kg Coil outer diameter: 1300 mm Min. coil inner diameter: 450 - 550 mm Max. coil width: 400 mm Min. Coil width: 50 Min. coil width for version with pneumatic downholder: 80 mm
    Coil weight: 2500 kg
    Coil outer diameter: 1300 mm
    Min. coil inner diameter: 450 - 550 mm
    Max. coil width: 400 mm
    Min. Coil width: 50
    Min. coil width for version with pneumatic downholder: 80 mm
    2
    Coil weight: 1250 kg Coil outer diameter: 1300 mm Min. coil inner diameter: 450 - 550 mm Max. coil width: 400 mm Min. Coil width: 50 Min. coil width for version with pneumatic downholder: 80 mm
    Coil weight: 1250 kg
    Coil outer diameter: 1300 mm
    Min. coil inner diameter: 450 - 550 mm
    Max. coil width: 400 mm
    Min. Coil width: 50
    Min. coil width for version with pneumatic downholder: 80 mm
    1
    Sheet Thickness - mild steel: 0.4 - 2 mm Max. sheet width: 600 mm Max. cross-section: 600x2 mm Feed roll diameter: 80 mm Motor torque: 10 Nm
    Sheet Thickness - mild steel: 0.4 - 2 mm
    Max. sheet width: 600 mm
    Max. cross-section: 600x2 mm
    Feed roll diameter: 80 mm
    Motor torque: 10 Nm
    2
    Sheet Thickness - mild steel: 0.4 - 3 mm Max. sheet width: 400 mm Max. cross-section: 400x3 mm Feed roll diameter: 80 mm Motor torque: 10 Nm
    Sheet Thickness - mild steel: 0.4 - 3 mm
    Max. sheet width: 400 mm
    Max. cross-section: 400x3 mm
    Feed roll diameter: 80 mm
    Motor torque: 10 Nm
    1
    Sheet Thickness - mild steel: 0.4 - 3 mm Max. sheet width: 300 mm Max. cross-section: 300x3 mm Feed roll diameter: 80 mm Motor torque: 10 Nm
    Sheet Thickness - mild steel: 0.4 - 3 mm
    Max. sheet width: 300 mm
    Max. cross-section: 300x3 mm
    Feed roll diameter: 80 mm
    Motor torque: 10 Nm
    2
    Bending length: 350 - 2800 mm Max. sheet length: 3050 mm Max. sheet width: 1524 mm Min. bendable width: 150 mm Max. bending height: 254 mm Max. bending depth: 50 mm Max. sheet rotation area: 3300 mm Bending force: 500 to Pressure force: 1000 to Sheet thickness (420 N/mm²): 3.2 mm Sheet thickness (600 N/mm²): 2.2 mm Sheet thickness (260 N/mm²): 4 mm Min. sheet thickness - mild steel: 0.5 mm Max. bending angle: 135 °
    Bending length: 350 - 2800 mm
    Max. sheet length: 3050 mm
    Max. sheet width: 1524 mm
    Min. bendable width: 150 mm
    Max. bending height: 254 mm
    Max. bending depth: 50 mm
    Max. sheet rotation area: 3300 mm
    Bending force: 500 to
    Pressure force: 1000 to
    Sheet thickness (420 N/mm²): 3.2 mm
    Sheet thickness (600 N/mm²): 2.2 mm
    Sheet thickness (260 N/mm²): 4 mm
    Min. sheet thickness - mild steel: 0.5 mm
    Max. bending angle: 135 °
    2
    Suitable for plates: 1 Max. bevel width: 66 mm Bevel angle: 60 ° Spindle speed (load-free): 300-800 rpm Feed speed: 0 - 1,2 mm/min Max. cutting depth: 6 mm Motor: 6.5 kW Length: 1179 mm Width: 853 mm Height: 1524 mm Weight: 320 kg
    Suitable for plates: 1
    Max. bevel width: 66 mm
    Bevel angle: 60 °
    Spindle speed (load-free): 300-800 rpm
    Feed speed: 0 - 1,2 mm/min
    Max. cutting depth: 6 mm
    Motor: 6.5 kW
    Length: 1179 mm
    Width: 853 mm
    Height: 1524 mm
    Weight: 320 kg
    2
    Suitable for plates: 1 Max. bevel width: 35 mm Bevel angle: 60 ° Spindle speed (load-free): 2780 rpm Plate thickness: 35 mm Feed speed: 250 - 500 mm/min Motor: 1.6 kW Weight: 54 kg
    Suitable for plates: 1
    Max. bevel width: 35 mm
    Bevel angle: 60 °
    Spindle speed (load-free): 2780 rpm
    Plate thickness: 35 mm
    Feed speed: 250 - 500 mm/min
    Motor: 1.6 kW
    Weight: 54 kg
    2
    Suitable for plates: 1 Suitable for tubes: 1 Max. bevel width: 30 mm Bevel angle: 60 ° Spindle speed (load-free): 500-2920 rpm Bevel of tube outer edge: 50 - 150 m/min Feed speed: 3 mm/min Work piece height: 100 mm Motor: 7.5 kW Length: 200 mm Width: 100 mm Weight: 850 kg
    Suitable for plates: 1
    Suitable for tubes: 1
    Max. bevel width: 30 mm
    Bevel angle: 60 °
    Spindle speed (load-free): 500-2920 rpm
    Bevel of tube outer edge: 50 - 150 m/min
    Feed speed: 3 mm/min
    Work piece height: 100 mm
    Motor: 7.5 kW
    Length: 200 mm
    Width: 100 mm
    Weight: 850 kg
    2
    Suitable for plates: 1 Suitable for tubes: 1 Max. bevel width: 21 mm Bevel angle: 60 ° Spindle speed (load-free): 2740-3290 rpm Motor: 2.2 kW Weight: 21 kg
    Suitable for plates: 1
    Suitable for tubes: 1
    Max. bevel width: 21 mm
    Bevel angle: 60 °
    Spindle speed (load-free): 2740-3290 rpm
    Motor: 2.2 kW
    Weight: 21 kg
    1
    Suitable for plates: 1 Suitable for tubes: 1 Max. bevel width: 21 mm Bevel angle: 60 ° Spindle speed (load-free): 1300-1560 rpm Bevel of tube outer edge: 300 m/min Motor: 1.6 kW Length: 441 mm Width: 366 mm Height: 339 mm Weight: 23 kg
    Suitable for plates: 1
    Suitable for tubes: 1
    Max. bevel width: 21 mm
    Bevel angle: 60 °
    Spindle speed (load-free): 1300-1560 rpm
    Bevel of tube outer edge: 300 m/min
    Motor: 1.6 kW
    Length: 441 mm
    Width: 366 mm
    Height: 339 mm
    Weight: 23 kg
    1
    Suitable for plates: 1 Suitable for tubes: 1 Max. bevel width: 21 mm Bevel angle: 60 ° Spindle speed (load-free): 2820 rpm Motor: 1.1 kW Weight: 20 kg
    Suitable for plates: 1
    Suitable for tubes: 1
    Max. bevel width: 21 mm
    Bevel angle: 60 °
    Spindle speed (load-free): 2820 rpm
    Motor: 1.1 kW
    Weight: 20 kg
    1
    Suitable for plates: 1 Suitable for tubes: 1 Max. bevel width: 18 mm Bevel angle: 60 ° Bevel radius: 2-5 mm Spindle speed (load-free): 1800-5850 rpm Min. diameter of bevel: 40 mm Motor: 2.2 kW Length: 585 mm Width: 156 mm Height: 238 mm Weight: 10 kg
    Suitable for plates: 1
    Suitable for tubes: 1
    Max. bevel width: 18 mm
    Bevel angle: 60 °
    Bevel radius: 2-5 mm
    Spindle speed (load-free): 1800-5850 rpm
    Min. diameter of bevel: 40 mm
    Motor: 2.2 kW
    Length: 585 mm
    Width: 156 mm
    Height: 238 mm
    Weight: 10 kg
    1
    Cutting length: 1530 mm Max. thickness - mild steel: 16 mm Max. thickness - stainless steel: 12 mm Strokes: 7 1/min Cutting angle: 3 ° Number of downholders: 8 pcs. Back gauge: 500 mm Motor power: 22.5 kW Oiltank: 250 l Table height: 950 mm Length: 2350 mm Width: 1400 mm Height: 2000 mm Weight: 5200 kg
    Cutting length: 1530 mm
    Max. thickness - mild steel: 16 mm
    Max. thickness - stainless steel: 12 mm
    Strokes: 7 1/min
    Cutting angle: 3 °
    Number of downholders: 8 pcs.
    Back gauge: 500 mm
    Motor power: 22.5 kW
    Oiltank: 250 l
    Table height: 950 mm
    Length: 2350 mm
    Width: 1400 mm
    Height: 2000 mm
    Weight: 5200 kg
    1
    Cutting length: 1280 mm Max. thickness - mild steel: 16 mm Max. thickness - stainless steel: 12 mm Strokes: 8 1/min Cutting angle: 3 ° Number of downholders: 7 pcs. Back gauge: 500 mm Motor power: 22.5 kW Oiltank: 250 l Table height: 950 mm Length: 2100 mm Width: 1400 mm Height: 2000 mm Weight: 5000 kg
    Cutting length: 1280 mm
    Max. thickness - mild steel: 16 mm
    Max. thickness - stainless steel: 12 mm
    Strokes: 8 1/min
    Cutting angle: 3 °
    Number of downholders: 7 pcs.
    Back gauge: 500 mm
    Motor power: 22.5 kW
    Oiltank: 250 l
    Table height: 950 mm
    Length: 2100 mm
    Width: 1400 mm
    Height: 2000 mm
    Weight: 5000 kg
    1
    Cutting length: 1530 mm Max. thickness - mild steel: 12 mm Max. thickness - stainless steel: 9 mm Strokes: 8 1/min Cutting angle: 3 ° Number of downholders: 8 pcs. Back gauge: 500 mm Motor power: 15 kW Oiltank: 180 l Table height: 950 mm Length: 2200 mm Width: 1200 mm Height: 1800 mm Weight: 3400 kg
    Cutting length: 1530 mm
    Max. thickness - mild steel: 12 mm
    Max. thickness - stainless steel: 9 mm
    Strokes: 8 1/min
    Cutting angle: 3 °
    Number of downholders: 8 pcs.
    Back gauge: 500 mm
    Motor power: 15 kW
    Oiltank: 180 l
    Table height: 950 mm
    Length: 2200 mm
    Width: 1200 mm
    Height: 1800 mm
    Weight: 3400 kg
    1
    Cutting length: 1280 mm Max. thickness - mild steel: 12 mm Max. thickness - stainless steel: 9 mm Strokes: 9 1/min Cutting angle: 3 ° Number of downholders: 7 pcs. Back gauge: 500 mm Motor power: 15 kW Oiltank: 180 l Table height: 950 mm Length: 1950 mm Width: 1200 mm Height: 1800 mm Weight: 3200 kg
    Cutting length: 1280 mm
    Max. thickness - mild steel: 12 mm
    Max. thickness - stainless steel: 9 mm
    Strokes: 9 1/min
    Cutting angle: 3 °
    Number of downholders: 7 pcs.
    Back gauge: 500 mm
    Motor power: 15 kW
    Oiltank: 180 l
    Table height: 950 mm
    Length: 1950 mm
    Width: 1200 mm
    Height: 1800 mm
    Weight: 3200 kg
    1
    Cutting length: 1030 mm Max. thickness - mild steel: 10 mm Max. thickness - stainless steel: 6 mm Strokes: 10 1/min Cutting angle: 3 ° Number of downholders: 7 pcs. Back gauge: 5000 mm Motor power: 11 kW Oiltank: 100 l Table height: 900 mm Length: 1550 mm Width: 1150 mm Height: 1600 mm Weight: 1900 kg
    Cutting length: 1030 mm
    Max. thickness - mild steel: 10 mm
    Max. thickness - stainless steel: 6 mm
    Strokes: 10 1/min
    Cutting angle: 3 °
    Number of downholders: 7 pcs.
    Back gauge: 5000 mm
    Motor power: 11 kW
    Oiltank: 100 l
    Table height: 900 mm
    Length: 1550 mm
    Width: 1150 mm
    Height: 1600 mm
    Weight: 1900 kg
    1
    Cutting length: 1030 mm Max. thickness - mild steel: 8 mm Max. thickness - stainless steel: 5 mm Strokes: 14 1/min Cutting angle: 3 ° Number of downholders: 7 pcs. Back gauge: 500 mm Motor power: 7.5 kW Oiltank: 100 l Table height: 900 mm Length: 1550 mm Width: 1150 mm Height: 1600 mm Weight: 1800 kg
    Cutting length: 1030 mm
    Max. thickness - mild steel: 8 mm
    Max. thickness - stainless steel: 5 mm
    Strokes: 14 1/min
    Cutting angle: 3 °
    Number of downholders: 7 pcs.
    Back gauge: 500 mm
    Motor power: 7.5 kW
    Oiltank: 100 l
    Table height: 900 mm
    Length: 1550 mm
    Width: 1150 mm
    Height: 1600 mm
    Weight: 1800 kg
    1
    Cutting length: 1030 mm Max. thickness - mild steel: 6 mm Max. thickness - stainless steel: 4 mm Strokes: 14 1/min Cutting angle: 3 ° Number of downholders: 7 pcs. Back gauge: 500 mm Motor power: 5.5 kW Oiltank: 100 l Table height: 900 mm Length: 1550 mm Width: 1150 mm Height: 1600 mm Weight: 1700 kg
    Cutting length: 1030 mm
    Max. thickness - mild steel: 6 mm
    Max. thickness - stainless steel: 4 mm
    Strokes: 14 1/min
    Cutting angle: 3 °
    Number of downholders: 7 pcs.
    Back gauge: 500 mm
    Motor power: 5.5 kW
    Oiltank: 100 l
    Table height: 900 mm
    Length: 1550 mm
    Width: 1150 mm
    Height: 1600 mm
    Weight: 1700 kg
    1
    Cutting length: 6080 mm Max. thickness - mild steel: 13 mm Max. thickness - stainless steel: 10 mm Gap in side frame: 350 mm Strokes: 10 1/min Cutting angle: 0,5 - 2,5 ° Number of downholders: 29 pcs. Pressure of downholder: 58 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 37 kW Oiltank: 400 l Support arms: 6 pcs. Table height: 950 mm Table width: 650 mm Table length: 6375 mm Length: 7400 mm Width: 2200 mm Total width with support arm und protection fence: 3700 mm Height: 2900 mm Weight: 33820 kg
    Cutting length: 6080 mm
    Max. thickness - mild steel: 13 mm
    Max. thickness - stainless steel: 10 mm
    Gap in side frame: 350 mm
    Strokes: 10 1/min
    Cutting angle: 0,5 - 2,5 °
    Number of downholders: 29 pcs.
    Pressure of downholder: 58 to
    Back gauge: 1000 mm
    Back gauge speed: 200 mm/s
    Motor power: 37 kW
    Oiltank: 400 l
    Support arms: 6 pcs.
    Table height: 950 mm
    Table width: 650 mm
    Table length: 6375 mm
    Length: 7400 mm
    Width: 2200 mm
    Total width with support arm und protection fence: 3700 mm
    Height: 2900 mm
    Weight: 33820 kg
    1
    Cutting length: 6080 mm Max. thickness - mild steel: 6 mm Max. thickness - stainless steel: 4 mm Gap in side frame: 350 mm Strokes: 10 1/min Cutting angle: 0,5 - 2 ° Number of downholders: 29 pcs. Pressure of downholder: 20 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 22 kW Oiltank: 200 l Support arms: 5 pcs. Table height: 900 mm Table width: 630 mm Table length: 6370 mm Length: 7300 mm Width: 2150 mm Total width with support arm und protection fence: 3400 mm Height: 2750 mm Weight: 25500 kg
    Cutting length: 6080 mm
    Max. thickness - mild steel: 6 mm
    Max. thickness - stainless steel: 4 mm
    Gap in side frame: 350 mm
    Strokes: 10 1/min
    Cutting angle: 0,5 - 2 °
    Number of downholders: 29 pcs.
    Pressure of downholder: 20 to
    Back gauge: 1000 mm
    Back gauge speed: 200 mm/s
    Motor power: 22 kW
    Oiltank: 200 l
    Support arms: 5 pcs.
    Table height: 900 mm
    Table width: 630 mm
    Table length: 6370 mm
    Length: 7300 mm
    Width: 2150 mm
    Total width with support arm und protection fence: 3400 mm
    Height: 2750 mm
    Weight: 25500 kg
    1
    Cutting length: 3080 mm Max. thickness - mild steel: 6 mm Max. thickness - stainless steel: 4 mm Gap in side frame: 350 mm Strokes: 20 1/min Cutting angle: 0,5 - 2 ° Number of downholders: 16 pcs. Pressure of downholder: 20 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 11 kW Oiltank: 125 l Support arms: 3 pcs. Table height: 820 mm Table width: 494 mm Table length: 3280 mm Length: 4100 mm Width: 2050 mm Total width with support arm und protection fence: 3650 mm Height: 1950 mm Weight: 7980 kg
    Cutting length: 3080 mm
    Max. thickness - mild steel: 6 mm
    Max. thickness - stainless steel: 4 mm
    Gap in side frame: 350 mm
    Strokes: 20 1/min
    Cutting angle: 0,5 - 2 °
    Number of downholders: 16 pcs.
    Pressure of downholder: 20 to
    Back gauge: 1000 mm
    Back gauge speed: 200 mm/s
    Motor power: 11 kW
    Oiltank: 125 l
    Support arms: 3 pcs.
    Table height: 820 mm
    Table width: 494 mm
    Table length: 3280 mm
    Length: 4100 mm
    Width: 2050 mm
    Total width with support arm und protection fence: 3650 mm
    Height: 1950 mm
    Weight: 7980 kg
    1
    Cutting length: 150 mm Max. thickness - mild steel: 6 mm Length: 290 mm Width: 90 mm Height: 560 mm Weight: 14 kg
    Cutting length: 150 mm
    Max. thickness - mild steel: 6 mm
    Length: 290 mm
    Width: 90 mm
    Height: 560 mm
    Weight: 14 kg
    3
    Cutting length: 3100 mm Max. thickness - mild steel: 4 mm Strokes: 42 1/min Cutting angle: 1 ° Back gauge: 750 mm Motor power: 7.5 kW Support arms: 2 pcs. Table height: 800 mm Table width: 450 mm Length: 3700 mm Width: 2300 mm Height: 1350 mm Weight: 3730 kg
    Cutting length: 3100 mm
    Max. thickness - mild steel: 4 mm
    Strokes: 42 1/min
    Cutting angle: 1 °
    Back gauge: 750 mm
    Motor power: 7.5 kW
    Support arms: 2 pcs.
    Table height: 800 mm
    Table width: 450 mm
    Length: 3700 mm
    Width: 2300 mm
    Height: 1350 mm
    Weight: 3730 kg
    2
    Cutting length: 1250 mm Max. thickness - mild steel: 1.5 mm Back gauge: 500 mm Length: 2250 mm Width: 1000 mm Height: 1150 mm Weight: 460 kg
    Cutting length: 1250 mm
    Max. thickness - mild steel: 1.5 mm
    Back gauge: 500 mm
    Length: 2250 mm
    Width: 1000 mm
    Height: 1150 mm
    Weight: 460 kg
    1
    Cutting length: 1020 mm Max. thickness - mild steel: 1.5 mm Back gauge: 500 mm Length: 1950 mm Width: 1000 mm Height: 1150 mm Weight: 420 kg
    Cutting length: 1020 mm
    Max. thickness - mild steel: 1.5 mm
    Back gauge: 500 mm
    Length: 1950 mm
    Width: 1000 mm
    Height: 1150 mm
    Weight: 420 kg
    2
    Cutting length: 3100 mm Max. thickness - mild steel: 16 mm Max. thickness - stainless steel: 10 mm Gap in side frame: 350 mm Strokes: 10 1/min Cutting angle: 2 ° Number of downholders: 14 pcs. Pressure of downholder: 61 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 37 kW Oiltank: 410 l Support arms: 2 pcs. Table height: 818 mm Table width: 550 mm Table length: 3580 mm Length: 4550 mm Width: 2250 mm Total width with support arm und protection fence: 3825 mm Height: 2250 mm Weight: 15000 kg
    Cutting length: 3100 mm
    Max. thickness - mild steel: 16 mm
    Max. thickness - stainless steel: 10 mm
    Gap in side frame: 350 mm
    Strokes: 10 1/min
    Cutting angle: 2 °
    Number of downholders: 14 pcs.
    Pressure of downholder: 61 to
    Back gauge: 1000 mm
    Back gauge speed: 200 mm/s
    Motor power: 37 kW
    Oiltank: 410 l
    Support arms: 2 pcs.
    Table height: 818 mm
    Table width: 550 mm
    Table length: 3580 mm
    Length: 4550 mm
    Width: 2250 mm
    Total width with support arm und protection fence: 3825 mm
    Height: 2250 mm
    Weight: 15000 kg
    2
    Cutting length: 4100 mm Max. thickness - mild steel: 13 mm Max. thickness - stainless steel: 8 mm Gap in side frame: 350 mm Strokes: 8 1/min Cutting angle: 1.75 ° Number of downholders: 18 pcs. Pressure of downholder: 62 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 30 kW Oiltank: 330 l Support arms: 3 pcs. Table height: 818 mm Table width: 550 mm Table length: 4520 mm Length: 5350 mm Width: 2250 mm Total width with support arm und protection fence: 3650 mm Height: 2250 mm Weight: 16300 kg
    Cutting length: 4100 mm
    Max. thickness - mild steel: 13 mm
    Max. thickness - stainless steel: 8 mm
    Gap in side frame: 350 mm
    Strokes: 8 1/min
    Cutting angle: 1.75 °
    Number of downholders: 18 pcs.
    Pressure of downholder: 62 to
    Back gauge: 1000 mm
    Back gauge speed: 200 mm/s
    Motor power: 30 kW
    Oiltank: 330 l
    Support arms: 3 pcs.
    Table height: 818 mm
    Table width: 550 mm
    Table length: 4520 mm
    Length: 5350 mm
    Width: 2250 mm
    Total width with support arm und protection fence: 3650 mm
    Height: 2250 mm
    Weight: 16300 kg
    2
    Cutting length: 3100 mm Max. thickness - mild steel: 13 mm Max. thickness - stainless steel: 8 mm Gap in side frame: 50 mm Strokes: 13 1/min Cutting angle: 1.75 ° Number of downholders: 16 pcs. Pressure of downholder: 37 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 30 kW Oiltank: 330 l Support arms: 2 pcs. Table height: 840 mm Table width: 600 mm Table length: 3550 mm Length: 4280 mm Width: 2300 mm Total width with support arm und protection fence: 3600 mm Height: 2350 mm Weight: 12500 kg
    Cutting length: 3100 mm
    Max. thickness - mild steel: 13 mm
    Max. thickness - stainless steel: 8 mm
    Gap in side frame: 50 mm
    Strokes: 13 1/min
    Cutting angle: 1.75 °
    Number of downholders: 16 pcs.
    Pressure of downholder: 37 to
    Back gauge: 1000 mm
    Back gauge speed: 200 mm/s
    Motor power: 30 kW
    Oiltank: 330 l
    Support arms: 2 pcs.
    Table height: 840 mm
    Table width: 600 mm
    Table length: 3550 mm
    Length: 4280 mm
    Width: 2300 mm
    Total width with support arm und protection fence: 3600 mm
    Height: 2350 mm
    Weight: 12500 kg
    2
    Cutting length: 3100 mm Max. thickness - mild steel: 10 mm Max. thickness - stainless steel: 6 mm Gap in side frame: 50 mm Strokes: 13 1/min Cutting angle: 1.5 ° Number of downholders: 16 pcs. Pressure of downholder: 22 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 22 kW Oiltank: 200 l Support arms: 2 pcs. Table height: 865 mm Table width: 580 mm Table length: 3515 mm Length: 4200 mm Width: 2250 mm Total width with support arm und protection fence: 3600 mm Height: 2100 mm Weight: 9300 kg
    Cutting length: 3100 mm
    Max. thickness - mild steel: 10 mm
    Max. thickness - stainless steel: 6 mm
    Gap in side frame: 50 mm
    Strokes: 13 1/min
    Cutting angle: 1.5 °
    Number of downholders: 16 pcs.
    Pressure of downholder: 22 to
    Back gauge: 1000 mm
    Back gauge speed: 200 mm/s
    Motor power: 22 kW
    Oiltank: 200 l
    Support arms: 2 pcs.
    Table height: 865 mm
    Table width: 580 mm
    Table length: 3515 mm
    Length: 4200 mm
    Width: 2250 mm
    Total width with support arm und protection fence: 3600 mm
    Height: 2100 mm
    Weight: 9300 kg
    2
    Cutting length: 4100 mm Max. thickness - mild steel: 6 mm Max. thickness - stainless steel: 4 mm Gap in side frame: 50 mm Strokes: 12 1/min Cutting angle: 1.5 ° Number of downholders: 20 pcs. Pressure of downholder: 17 to Back gauge: 1000 mm Back gauge speed: 200 mm/s Motor power: 15 kW Oiltank: 200 l Support arms: 3 pcs. Table height: 865 mm Table width: 580 mm Table length: 4510 mm Length: 5230 mm Width: 2300 mm Total width with support arm und protection fence: 3600 mm Height: 2150 mm Weight: 11460 kg
    Cutting length: 4100 mm
    Max. thickness - mild steel: 6 mm
    Max. thickness - stainless steel: 4 mm
    Gap in side frame: 50 mm
    Strokes: 12 1/min
    Cutting angle: 1.5 °
    Number of downholders: 20 pcs.
    Pressure of downholder: 17 to
    Back gauge: 1000 mm
    Back gauge speed: 200 mm/s
    Motor power: 15 kW
    Oiltank: 200 l
    Support arms: 3 pcs.
    Table height: 865 mm
    Table width: 580 mm
    Table length: 4510 mm
    Length: 5230 mm
    Width: 2300 mm
    Total width with support arm und protection fence: 3600 mm
    Height: 2150 mm
    Weight: 11460 kg
    3
    Max. thickness - mild steel: 4 mm Throat depth: 200 mm Tools: 4 pcs. Rolls diameter: 126 mm Motor: 2.2 kW Revs: 16 1/min Length: 1700 mm Width: 570 mm Height: 1200 mm Weight: 500 kg
    Max. thickness - mild steel: 4 mm
    Throat depth: 200 mm
    Tools: 4 pcs.
    Rolls diameter: 126 mm
    Motor: 2.2 kW
    Revs: 16 1/min
    Length: 1700 mm
    Width: 570 mm
    Height: 1200 mm
    Weight: 500 kg
    2
    Max. thickness - mild steel: 2.5 mm Throat depth: 160 mm Tools: 4 pcs. Rolls diameter: 96 mm Motor: 1.5 kW Revs: 16 1/min Length: 1400 mm Width: 550 mm Height: 1120 mm Weight: 380 kg
    Max. thickness - mild steel: 2.5 mm
    Throat depth: 160 mm
    Tools: 4 pcs.
    Rolls diameter: 96 mm
    Motor: 1.5 kW
    Revs: 16 1/min
    Length: 1400 mm
    Width: 550 mm
    Height: 1120 mm
    Weight: 380 kg
    2
    Max. thickness - mild steel: 1.2 mm Throat depth: 100 mm Shaft length: 140 mm Tools: 7 pcs. Rolls diameter: 62 mm Length: 560 mm Width: 220 mm Height: 500 mm Weight: 50 kg
    Max. thickness - mild steel: 1.2 mm
    Throat depth: 100 mm
    Shaft length: 140 mm
    Tools: 7 pcs.
    Rolls diameter: 62 mm
    Length: 560 mm
    Width: 220 mm
    Height: 500 mm
    Weight: 50 kg
     

    Dealer


    HESSE+CO Maschinenfabrik GmbH
    Industriezentrum Nö-süd Straße 4 - Objekt 8
     2351 Wiener neudorf
    Member since 27.04.2023

    Share this advert


    Send request