Ref. no.: 18482
Hersteller: KRAUSS MAFFEI
Year of construction: 2010

Clamping unit
Clamping force: 300 ton
Opening stroke: 820 mm
Distance between tie bars: 810 X 720 mm
Mould height min.: 480 mm
Opening width: 1300 mm

Injection unit
Screw diameter: 60 mm
Injection volume: 792 cm³
Shot weight: 720 g
Injection pressure: 2420 bar

Measurements and weight
Dimensions: 6,7 X 2,1 X 2,4 m
Machine weight: 16400 kg

Additional information & extras
Accumulator: 1 pcs

Robot
Producer: Krauss Maffei
Type: KM LRX S 250
Year: 2010

Ref. no.: 18481
Hersteller: ARBURG
Year of construction: 2004

Clamping unit
Clamping force: 60 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 200 mm
Platen size (h x v): 446 X 446 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 45 cm³
Shot weight: 40 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,5 X 1,5 X 1,7 m
Machine weight: 2330 kg

Ref. no.: 18439
Hersteller: MOTAN
Year of construction: 1995

Further information:
These are 15 drying hoppers with a capacity of 60L each. The conveying devices on them are included in the scope of delivery.

Additionally, the two vacuum generators, the two central dryers, and the main control unit are also included.

Ref. no.: 17540
Hersteller: ARBURG
Year of construction: 1994

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 270 X 270 mm
Mould height min.: 200 mm
Platen size (h x v): 405 X405 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 67 cm³
Shot weight: 61 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,3 X 1,5 X 2,0 m
Machine weight: 2400 kg

Ref. no.: 18395
Hersteller: DEMAG
Year of construction: 2007

Clamping unit
Clamping force: 150 ton
Opening stroke: 500 mm
Distance between tie bars: 500 X 500 mm
Mould height min.: 250 mm
Mould height max.: 560 mm
Platen size (h x v): 750 X 750 mm

Injection unit
Screw diameter: 40 mm
Injection volume: 255 cm³
Shot weight: 230 g
Injection pressure: 2418 bar

Measurements and weight
Dimensions: 5,2 X 1,6 X 2,1 m
Machine weight: 7500 kg

Robot
Producer: Wittmann
Type: W711-1776 (doppelter x-Greifer)
Year: 2008

Ref. no.: 17147
Hersteller: ENGEL
Year of construction: 2008

Clamping unit
Clamping force: 400 ton
Opening stroke: 1008 mm
Platen size (h x v): 1360 x 1460 mm

Injection unit
Screw diameter: 60 + 25 + 25+ 25+ 25 mm
Injection volume: 608 + 54 + 54 + 54 + 54 cm³
Shot weight: 547 + 48 + 48 + 48 + 48 g
Injection pressure: 1725 + 1200 + 1200 + 1200 + 1200 bar

Measurements and weight
Machine weight: 22.000 + 6.600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m

Ref. no.: 18244
Hersteller: DEMAG
Year of construction: 2006

Clamping unit
Clamping force: 200 ton
Opening stroke: 575 mm
Distance between tie bars: 580 X 580 mm
Mould height min.: 340 mm
Mould height max.: 790 mm
Opening width: 1365 mm
Platen size (h x v): 860 X 860 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 442 cm³
Shot weight: 400 g
Injection pressure: 1946 bar

Measurements and weight
Dimensions: 5,4 X 1,7 X 2,1 m
Machine weight: 8200 kg

Ref. no.: 17148
Hersteller: ENGEL
Year of construction: 2008

Clamping unit
Clamping force: 400 ton
Opening width: 1008 mm
Platen size (h x v): 1300 x 1460 mm

Injection unit
Screw diameter: 50 + 18 + 25 + 25 + 25 + 25 mm
Injection volume: 422 + 38 + 54 + 54 + 54 +54 cm³
Shot weight: 380 + 35 + 48 +48 + 48 + 48 g
Injection pressure: 2322 + 2500 + 1200 + 1200 + 1200 + 1200 bar

Measurements and weight
Machine weight: 22000 + 6600 kg
Dimensions LxWxH part 1: 5 x 2,3 x m
Dimensions LxWxH part 2: 3,9 x 2,3 x m

Ref. no.: 17146
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 300 ton
Opening stroke: 855 mm

Injection unit
Screw diameter: 50 + 25 mm
Injection volume: 393 + 49 cm³
Shot weight: 354 + 44 g
Injection pressure: 1917 + 1586 bar

Measurements and weight
Dimensions: 6,5 x 2,3 x m
Machine weight: 21000 kg

Ref. no.: 18333
Hersteller: DEMAG
Year of construction: 1998

Clamping unit
Clamping force: 330 ton
Opening stroke: 675 mm
Distance between tie bars: 710 x 630 mm
Mould height min.: 330 mm
Mould height max.: 710 mm
Platen size (h x v): 1040 X 950 mm

Injection unit
Screw diameter: 50 mm
Injection volume: 530 cm³
Shot weight: 480 g
Injection pressure: 2426 bar

Measurements and weight
Dimensions: 6,5 X 2,0 X 2,3 m
Machine weight: 14300 kg

Ref. no.: 18331
Hersteller: ARBURG
Year of construction: 2001

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 x 320 mm
Mould height min.: 225 mm
Opening width: 575 mm
Platen size (h x v): 446 x446 mm

Injection unit
Screw diameter: 25 mm
Injection volume: 54 cm³
Shot weight: 49 g
Injection pressure: 2500 bar

Measurements and weight
Dimensions: 3,5 x 12 x 1,9 m
Machine weight: 2250 kg

Ref. no.: 18330
Hersteller: ARBURG
Year of construction: 2003

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 225 mm
Mould height max.: 575 mm
Platen size (h x v): 446 X 446 mm

Injection unit
Screw diameter: 25 + 15 mm
Injection volume: 39 + 20 cm³
Shot weight: 35 + 18 g
Injection pressure: 2210 bar

Measurements and weight
Dimensions: 3,5 X 1,2 x 1,9 m
Machine weight: 2250 kg

Ref. no.: 18404
Hersteller: ARBURG
Year of construction: 2001

Clamping unit
Clamping force: 130 ton
Opening stroke: 500 mm
Distance between tie bars: 420 x420 mm
Mould height min.: 250 mm
Opening width: 750 mm
Platen size (h x v): 605 x 605 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 230 cm³
Shot weight: 210 g
Injection pressure: 1670 bar

Measurements and weight
Dimensions: 4,68 x 1,3 x 2,2 m
Machine weight: 5100 kg

Additional information & extras
Core pull: 1 pcs

Ref. no.: 18383
Hersteller: DEMAG
Year of construction: 2008

Clamping unit
Clamping force: 420 ton
Opening stroke: 770 mm
Distance between tie bars: 820 X 820 mm
Mould height min.: 380 mm
Mould height max.: 825 mm
Platen size (h x v): 1200 X 1100 mm

Injection unit
Screw diameter: 60 mm
Injection volume: 890 cm³
Shot weight: 810 g
Injection pressure: 2420 bar

Measurements and weight
Dimensions: 8,2 X 2,2 X 2,4 m
Machine weight: 22300 kg

Additional information & extras
Core pull: 4 pcs
Air valve: 7 pcs
Hot runner systems: 8 pcs.

Ref. no.: 18368
Hersteller: ARBURG
Year of construction: 1997

Clamping unit
Clamping force: 50 ton
Opening stroke: 350 mm
Distance between tie bars: 320 X 320 mm
Mould height min.: 300 mm
Mould height max.: 550 mm
Platen size (h x v): 446 X 446 mm

Injection unit
Screw diameter: 30 mm
Injection volume: 85 cm³
Shot weight: 75 g
Injection pressure: 2200 bar

Measurements and weight
Dimensions: 3,25 x 1.15 x 2,0 m
Machine weight: 2250 kg

Ref. no.: 18255
Hersteller: ENGEL
Year of construction: 2004

Clamping unit
Clamping force: 180 ton
Opening stroke: 750 mm
Distance between tie bars: 960 x830 mm
Mould height min.: 500 mm
Opening width: 1250 mm

Injection unit
Screw diameter: 45 mm
Injection volume: 318 cm³
Shot weight: 302 g
Injection pressure: 1769/2360 bar

Measurements and weight
Machine weight: 13500 kg

Robot
Producer: Wittman
Type: W743
Year: 2009

CHILLER GR2A 80/Z
Year: 2015
Very good state
Nominal cooling capacity: 77.5 kw - 66,600 kcal /h
Pump flow: 222 L/min
Excellent condition - 9 month warranty.
Net weight: 900 KG
Dimensions: 2200mm x 1450mm x 2200mm

Vertical injection molding machine ENGEL INSERT 750H/240
Year: 2007
Working hours : 71 412 hours
Clamping force: 240 T
Platen dimensions : diameter 1600 mm, 750 mm x 450 mm x 2
Minimum mold thickness: 480 mm
Maximum space between platen : 880 mm
Opening stroke: 405 mm
Ejector stroke: 105 mm
Ejector force: 20.1 KN
Diameter of centering washers on fixed and mobile plate: 160 mm

Injection unit:
Screw diameter: 45 mm
Injection volume: 318 cm3
Injection pressure: 1762 bar
Injection rate: 229 cm3/sec
Number of heating zones: 6
Nozzle stroke: 350 mm

2 hydraulic core pull

Dimensions:
4960 x 3656 x 3360mm

Weight: 14500KG

Hesta blow moulding machine in good condition
HESTA ST 502 extrusion blow molding machine
clamping force : 150 KN
Screw diameter: 50 mm / 22D
2 x 125mm
Speed: 300mm/sec
Shape thickness: 230-280mm
Maximum PE weight: 400 g
Machine weight: 3200 KG

BLOW MOLDING MACHINE BILLION P300
3 liters
Clamping force: 2 x 3.3 T
Closing stroke: 2 x 150 mm
Min mold thickness: 150mm
Platen Dimensions: Horizontal: 310mm x Vertical: 310mm
Screw diameter: 50mm
Screw stroke: 170 mm
Capacity per shot: 333 cm3
Pressure on the material: 1000 kg/cm2
L/D screw ratio: 15
Many spare parts supplied with the machine + several control cabinets + 1 set of molds

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 200
This injection blow molding machine PROCREA REV 200 can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 4 liters and weight of 5 gr. at 200 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 200 is very simple thanks to the automatic extraction system applied to the revolver.

INJECTION MACHINE - BLOWING MACHINE PROCREA
TYPE Rev 150
This PROCREA REV 150 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 15 cc. to 1500 cc and weight of 5 gr. at 150 g.
This machine is predisposed to work with molds from 1 to 8 cavities and the production is very high thanks to the revolver system which performs all the operations of injection, blowing and ejection of the finished piece in a single stage.
The construction of the molds for the Rev 150 is very simple thanks to the automatic extraction system applied to the revolver.

2 head
Entraxe :100 mm
Volume max of the bottle : 0,5 l
Number of post: 1
Extrusion continuous
Nombre d'extrudeuses: 1
Screw diameter : 60 mm
Rapport L/D: 20
Parison thickness control : PROFILOG 32 point
Heating knife
Voltage : 380 V Triphase
Frequency : 50 Hz

Robot WITTMANN
Reference : PIP 3040 BZ
Year : 2002

1 Set of PIOVAN peripheral with : 1 isolated hopper TN600 + 1 dryer high temperature PIOVAN DP622 + 1 PIOVAN power turbine F48

DRYING HOPPER brand PIOVAN Reference TN 600
With trapdoor
Contain 600 liters
Year 2015 , in perfect condition
7000 working hours

Dryer PIOVAN DP622
High temperature 200 °C
Dew point : - 60°C
Year 2015 , in perfect condition
7000 working hours

Power Turbine PIOVAN reference FA48
Power : 3 KW
Year 2015 , in perfect condition
7000 working hours

PLATFORM

SEPRO robot reference SR 4030 S3 visual in good condition
Year : April 2007
Weight of the robot : 900 KG
Weight of the command : 110 KG
Rated load : 12 kg

Strocke in X : 5500 mm
Strocke in Y : 800 mm
Strocke in Z : 1400 mm

CHILLER GRAC 250/Z
Year 2009
Nominal cooling capacity: 249 kw - 214.000 kcal /h
Pump flow: 710 L /min
Very good condition - 6 month warranty.
Weight : 2600 KG
Dimensions : 5500 mm x 1650 mm x 2300 mm

CHILLER GRAC 330/Z
Year 2006
Nominal cooling capacity: 328 kw - 282.000 kcal /h
Pump flow: 940 L /min
Very good condition - 6 month warranty.
Weight : 3400 KG
Dimensions : 5100 mm x 2150 mm x 2150 mm

Chiller INDUSTRIAL FRIGO type SIRE1 - 165/350 HP/Z/X With integrated energy saving system
Nominal cooling capacity: 164 KW - 141000 kcal/H
2 compressors 13,8 KW - max 24,5 KW
1 pump 10 KW - 470 L/min - 5,3 bars
Cooling capacity 175 KW - 151000 kcal/H
1 pump2 KW - 500 L/min - 1,7 bars
4 fans power of 1,3 KW - 65 000 m3/H
Internal capacity : 750 liters
Dimension : 3700 mm x 1100 mm x 2100 mm
Weight : 2300 KG

CHILLER GR2A 40/Z
Year 2017
Nominal cooling capacity: 40 KW - 33.100 kcal /h
Pump flow : 110 L /min
Very good condition - 6 month warranty.

CHILLER GR1AC30
Year 2017
Nominal cooling capacity: 30 kw - 24.000 kcal /h
Pump flow: 80 L /min
Very good condition - 6 month warranty.
Weight : 470 KG
Dimensions : 1100 mm x 1900 mm x 1900 mm

CHILLER brand DELTA PROCESS ALIZE 16 - 45 KW
Year 2002
In goog condition
Cooling power :45 KW
Voltage : 400 V
Frequency : 50 Hertz
Cooling liquid : R407C
Power install on the chiller : 15,74 kw

CHILLER brand PIOVAN CH 480 - 57 KW
Year 2015
In perfect condition - 7000 working hours
Cooling power : 57 KW
Voltage : 400 V
Frequency : 50 Hertz
Cooling liquid : R407C

Dryer PIOVAN DP622
High temperature 200 °C
Dew point : - 60°C
Year 2015 , in perfect condition
7000 working hours

PIOVAN RPA 800 mould dryer
Total power : 7,8 KW
Weight : 210 KG
Dimensions: 600 x 750 x 1500 mm
Year 2015 , in perfect condition , only 7000 working hours.

From 700 to 800 m3/h

For ambient temperature up to 45°C and humidity up to 90%
Easy maintenance
Compact footprint for installation close to primary machine on mezanine or floor.

Piovan Mould Dryers is ideal to prevent condensation in the mould area. They can operate in open or closed loop and for single or multiple machines.
Consistent dew point is assured by the PID control. Designed for fast start-up, do not need settings by operators.

They are ideally suited for:
• Mould enclosures of fast-cycle IMM’s
• Mould enclosures of blow moulding machines
• Mould enclosures and robot area of PET IMM’s

SEGHERS SMC 220 L thermal stripping system
Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters.
The combustion chamber is heated to approximately 420 degrees.
The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber.
Perfect cleaning for a cycle time of 90 to 150 min.
Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm
Dimensions of the basket: diameter 210 mm and length: 260 mm

Vertical injection moulding machine REP super Sancar
Pression fermeture : 200 T hydraulique
Volume injectable : 630 cm3
Passage moule maxi : 570 mm
Epaisseur moule maxi : 515 mm
Pression sur la matière : 1200 kg
Dimensions :
Hauteur : 3,30m
Largeur : 2,50 m
Profondeur : 1,30 m
Dimensions plateaux :
Fixe : 560 x 510 mm
Mobile : 530 x 510 mm

Injection moulding machine SANDRETTO serie 9 - 165 T
Reference serie 9 165/650
Year 2001
Screw diameter : 38mm
Injectable volume : 250 cm3
Injection Pressure : 2597 bars
Injection speed : 106 cm3/sec
Distance between tie bar : 460 x 460 mm
Platen dimension : 690 x 690 mm
Mold thickness : mini : 155 – maxi : 560 mm
Interface robot
3 core pull
1 air valve
+ SEPRO robot

Billion 200 T injection molding machine
Model : H780 / 200
Year : 1998
Screw diameter: 50mm
Injectable volume : 422 cm3
Injection pressure: 1843 bars
L / D: 22.3
Clamping force: 2000 KN
Minimum mold thickness: 280 mm
Maximum mold thickness: 580 mm
Distance between tie bars (h x v): 610mm x 610mm
Ejection stroke: 150mm
Dimension : 6,1 m x 1,9m x 2,35m
Weight : 9.5 t

Injection moulding machine SANDRETTO serie 9
Clamping force : 230 T
Year : 2001
Screw diameter is 50 mm.
Volume injectable : 475 cm3
Platen dimensions : 860 x 860 mm
Distance between tie bar is : 570 x 570 mm
Dimension are : 6,67 m x 2,22 m x 1,82 m
Weight of the machine : 10 200 KG

Billion 140 T HERCULE injection molding machine
Model : H780 / 140
Year : 2000
Screw diameter: 45mm
Injectable volume : 220 cm3
Injection pressure: 2100 bars
Clamping force: 1400 KN
Platen dimension : 650 x 650 mm
Distance between tie bar : 430 x 430 mm
Platen dimensions (h x v): 610mm x 610mm
Dimension : 5,1 m x 1,8 m x 2,20m
Weight : 7 T

SANDRETTO serie 8 790-200
Clamping force : 200 T
Distance between tie bar : 510 x 510 mm
Mould thickness min / max : 210 - 630 mm
Opening strocke : 550 mm
Injectable volume : 546 cm3
Presure on the plastic material max : 1450 bars
Screw diameter : 55 mm

Injection moulding machine in good condition BM BIRAGHI sintesi 150
Screw diameter : 50 mm
Clamping force : 150 T
Distance between tie bar : 460 x 460 mm
470 mm opening stroke
150 mm min opening mould

Injection moulding machine KRAUSS MAFFEI KM 65-1350
Clamping force : 65 T
Year 1996
Screw diameter : 30 mm
With EUROMAP 12

Billion 50 T PROXIMA injection molding machine
Model : H200/50
DIXIT 2 command
Year : 2001
Screw diameter: 30 mm
Injectable volume : 106 cm3
Injection pressure: 1910 bars
Clamping force: 500 KN
Platen dimension : 580 x 520 mm
Platen dimension : 580 mm x 520 mm
Mould thickness min/max : 180mm x 360 mm
Dimension : 3,52 m x 1,17 m x 1,72 m
Weight : 3,5 T
45000 working hours

INJECTION MOULDING MACHINE KRAUSS MAFFEI 500 H 3500 C1
Working hours : 51 850 hours
Clamping force : 500 T
Year : 2000
Screw diameter : 90 mm
Miximum injection volume : 1953 cm3
Injection pressure max : 1742 bars
Platen dimension : 1270 x 1200 mm
Distance between tie bar : 900 x 800 mm
Mould min thickness : 480 mm
Opening strocke max : 1170 mm
Distance max between platen : 1650 mm
Ejection stroke : 250 mm
Equipement :
Number of heating zone 20 zones
2 core pul on moving platen
2 core pull on fix platen

HMI / new control unit
New metering motor
Locking unit redone
Machine calibration done
New hydraulic hoses

NEGRI BOSSI 480 T
Clamping Force: 480T
reference : 4800 H 3800
Screw diameter: 90 mm
L/D ratio: 20
Maximum material pressure: 1500 bar
Injection volume : 2160 cm3
Injection capacity: 2270 g
Injection speed: 500mm/s
Plastification: 105 g/s
Clearence between tie bars (H x V): 710 x 800
Platen dimensions (H x V): 1190 x 1150
Max mold thickness: 850mm
Minimum mold thickness: 200mm
Ejection stroke: 300mm
Air cores: 2
Hydraulic cores: 2
+ 1 Wittmann Robot
Working hours : 70 000 h

Sandretto injection moulding machine MEGA T 610 T
Reference : 4435 - 610
Command : SEF 100

year :1996
Working hours : 47 200 h
Screw diameter : 80 mm
Volume injectable : 2237 cm3
Injection pressure : 1960 bars
Distance between tie bar : 850 x 850 mm
Platen dimensions : 1260 x 1260 mm
Mould thickness : min : 300 – max : 1000 mm

Interface robot
2 core pull
2 air valve

Temperaturbereich: Max. 30 °C
Heizleistung: . kW
Kühlleistung: . W
Umlaufmedium: 30 Grad
Gesamtleistungsbedarf: 4,5 kW
Maschinengewicht ca.: t
Raumbedarf ca.: m

Literleistung: . l
Temperaturbereich: 5-400 °C
Gesamtleistungsbedarf: . kW
Maschinengewicht ca.: . t
Raumbedarf ca.: . m